! Started logfile: J0943+6150_S_2017_02_19_pus_uvs.log on Sat May 4 18:47:44 2019 obs J0943+6150_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0943+6150_S_2017_02_19_pus_uva.fits ! AN table 1: 171 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.672125 visibilities/baseline/integration-bin. ! Found source: J0943+6150 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 20688 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0943+6150_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 319 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 305 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 305 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 835 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.943491Jy sigma=0.008059 ! Fit after self-cal, rms=0.932311Jy sigma=0.007970 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=4.355 mas, bpa=-83.19 degrees ! Estimated noise=1271.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0535884 Jy ! Component: 100 - total flux cleaned = 0.0653185 Jy ! Total flux subtracted in 100 components = 0.0653185 Jy ! Clean residual min=-0.003621 max=0.004456 Jy/beam ! Clean residual mean=0.000001 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.0653185 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0653185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081980Jy sigma=0.000652 ! Fit after self-cal, rms=0.081928Jy sigma=0.000652 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.681 mas, bmaj=5.042 mas, bpa=-89.1 degrees ! Estimated noise=638.722 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00503714 Jy ! Component: 100 - total flux cleaned = 0.00732009 Jy ! Component: 150 - total flux cleaned = 0.00857336 Jy ! Component: 200 - total flux cleaned = 0.00929387 Jy ! Total flux subtracted in 200 components = 0.00929387 Jy ! Clean residual min=-0.001988 max=0.002058 Jy/beam ! Clean residual mean=0.000007 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.0746123 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 36 components and 0.0746123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081570Jy sigma=0.000650 ! Fit after self-cal, rms=0.081530Jy sigma=0.000649 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.97 HN 1.03 KP 0.98 ! LA 1.05 MK 1.02 NL 0.85 OV 1.04 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 1.04 HN 1.04 KP 1.01 ! LA 1.01 MK 1.01 NL 1.02 OV 1.09 ! PT 1.00* SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.05 HN 1.02 KP 0.88 ! LA 0.81 MK 1.03 NL 1.13 OV 0.98 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.03 HN 0.94 KP 1.00* ! LA 0.84 MK 1.05 NL 1.00* OV 1.09 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.081530Jy sigma=0.000649 ! Fit after self-cal, rms=0.079227Jy sigma=0.000647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.703 mas, bmaj=5.047 mas, bpa=-89.32 degrees ! Estimated noise=637.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000490074 Jy ! Component: 100 - total flux cleaned = 0.000444764 Jy ! Component: 150 - total flux cleaned = 0.000456896 Jy ! Component: 200 - total flux cleaned = 0.00046668 Jy ! Total flux subtracted in 200 components = 0.00046668 Jy ! Clean residual min=-0.001700 max=0.001948 Jy/beam ! Clean residual mean=0.000003 rms=0.000419 Jy/beam ! Combined flux in latest and established models = 0.075079 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.075079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079220Jy sigma=0.000647 ! Fit after self-cal, rms=0.079162Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079162Jy sigma=0.000646 ! Fit after self-cal, rms=0.079227Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.704 mas, bmaj=5.057 mas, bpa=-89.29 degrees ! Estimated noise=637.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000182737 Jy ! Component: 100 - total flux cleaned = -0.000194209 Jy ! Component: 150 - total flux cleaned = -0.000193315 Jy ! Component: 200 - total flux cleaned = -0.000185388 Jy ! Total flux subtracted in 200 components = -0.000185388 Jy ! Clean residual min=-0.001404 max=0.001730 Jy/beam ! Clean residual mean=0.000002 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.0748936 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 44 components and 0.0748936 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079223Jy sigma=0.000645 ! Fit after self-cal, rms=0.079262Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-77.5, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00129055 Jy ! Component: 100 - total flux cleaned = 0.00132285 Jy ! Component: 150 - total flux cleaned = 0.00122778 Jy ! Component: 200 - total flux cleaned = 0.00118908 Jy ! Total flux subtracted in 200 components = 0.00118908 Jy ! Clean residual min=-0.001325 max=0.001432 Jy/beam ! Clean residual mean=0.000001 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.0760827 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.0760827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079231Jy sigma=0.000645 ! Fit after self-cal, rms=0.079219Jy sigma=0.000645 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079219Jy sigma=0.000645 ! Fit after self-cal, rms=0.079160Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.701 mas, bmaj=5.062 mas, bpa=-89.37 degrees ! Estimated noise=636.009 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000376136 Jy ! Component: 100 - total flux cleaned = 0.000272888 Jy ! Component: 150 - total flux cleaned = 0.000185065 Jy ! Component: 200 - total flux cleaned = 0.000109169 Jy ! Total flux subtracted in 200 components = 0.000109169 Jy ! Clean residual min=-0.001328 max=0.001406 Jy/beam ! Clean residual mean=0.000001 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.0761919 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 67 components and 0.0761919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079149Jy sigma=0.000645 ! Fit after self-cal, rms=0.079153Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (53, 42). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000287634 Jy ! Component: 100 - total flux cleaned = 0.000101101 Jy ! Component: 150 - total flux cleaned = -2.49866e-05 Jy ! Component: 200 - total flux cleaned = -0.000113497 Jy ! Total flux subtracted in 200 components = -0.000113497 Jy ! Clean residual min=-0.001289 max=0.001333 Jy/beam ! Clean residual mean=0.000002 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.0760784 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 85 components and 0.0760784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079126Jy sigma=0.000645 ! Fit after self-cal, rms=0.079131Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079131Jy sigma=0.000645 ! Fit after self-cal, rms=0.079135Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.135 mas, bmaj=8.645 mas, bpa=79.18 degrees ! Estimated noise=816.684 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000390051 Jy ! Component: 100 - total flux cleaned = -0.000406004 Jy ! Component: 150 - total flux cleaned = -0.000484312 Jy ! Component: 200 - total flux cleaned = -0.000512016 Jy ! Total flux subtracted in 200 components = -0.000512016 Jy ! Clean residual min=-0.001488 max=0.001522 Jy/beam ! Clean residual mean=0.000002 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.0755663 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 100 components and 0.0755663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079130Jy sigma=0.000645 ! Fit after self-cal, rms=0.079134Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.8964e-05 Jy ! Component: 100 - total flux cleaned = -0.000109325 Jy ! Component: 150 - total flux cleaned = -8.50333e-05 Jy ! Component: 200 - total flux cleaned = -8.49592e-05 Jy ! Total flux subtracted in 200 components = -8.49592e-05 Jy ! Clean residual min=-0.001503 max=0.001504 Jy/beam ! Clean residual mean=0.000002 rms=0.000372 Jy/beam ! Combined flux in latest and established models = 0.0754814 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 111 components and 0.0754814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079132Jy sigma=0.000645 ! Fit after self-cal, rms=0.079132Jy sigma=0.000645 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.703 mas, bmaj=5.064 mas, bpa=-89.25 degrees ! Estimated noise=635.771 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.703 x 5.064 at -89.25 degrees (North through East) ! Clean map min=-0.0013024 max=0.069526 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.136 mas, bmaj=4.355 mas, bpa=-83.25 degrees ! Estimated noise=1269.4 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0533095 Jy ! Component: 100 - total flux cleaned = 0.0651152 Jy ! Component: 150 - total flux cleaned = 0.0685198 Jy ! Component: 200 - total flux cleaned = 0.0698051 Jy ! Total flux subtracted in 200 components = 0.0698051 Jy ! Clean residual min=-0.003506 max=0.003238 Jy/beam ! Clean residual mean=-0.000002 rms=0.000837 Jy/beam ! Combined flux in latest and established models = 0.0698051 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0698051 Jy ! Inverting map and beam ! Estimated beam: bmin=3.703 mas, bmaj=5.064 mas, bpa=-89.25 degrees ! Estimated noise=635.771 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241329 Jy ! Component: 100 - total flux cleaned = 0.0036594 Jy ! Component: 150 - total flux cleaned = 0.00442596 Jy ! Component: 200 - total flux cleaned = 0.00505414 Jy ! Total flux subtracted in 200 components = 0.00505414 Jy ! Clean residual min=-0.001467 max=0.001368 Jy/beam ! Clean residual mean=0.000002 rms=0.000345 Jy/beam ! Combined flux in latest and established models = 0.0748593 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 39 components and 0.0748593 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.135 mas, bmaj=8.645 mas, bpa=79.18 degrees ! Estimated noise=816.684 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.21372e-05 Jy ! Component: 100 - total flux cleaned = -6.9493e-05 Jy ! Component: 150 - total flux cleaned = -5.80523e-06 Jy ! Component: 200 - total flux cleaned = 9.39135e-05 Jy ! Total flux subtracted in 200 components = 9.39135e-05 Jy ! Clean residual min=-0.001521 max=0.001565 Jy/beam ! Clean residual mean=0.000002 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.0749532 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.01105e-05 Jy ! Component: 100 - total flux cleaned = 0.000132603 Jy ! Component: 150 - total flux cleaned = 0.000176281 Jy ! Component: 200 - total flux cleaned = 0.000230647 Jy ! Total flux subtracted in 200 components = 0.000230647 Jy ! Clean residual min=-0.001525 max=0.001528 Jy/beam ! Clean residual mean=0.000002 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.0751838 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 64 components and 0.0751838 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.703 mas, bmaj=5.064 mas, bpa=-89.25 degrees ! Estimated noise=635.771 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.19627e-05 Jy ! Component: 100 - total flux cleaned = -9.01435e-05 Jy ! Component: 150 - total flux cleaned = -8.86673e-05 Jy ! Component: 200 - total flux cleaned = -0.00013632 Jy ! Total flux subtracted in 200 components = -0.00013632 Jy ! Clean residual min=-0.001291 max=0.001277 Jy/beam ! Clean residual mean=0.000001 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.0750475 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 77 components and 0.0750475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079137Jy sigma=0.000645 ! Fit after self-cal, rms=0.079138Jy sigma=0.000645 wmodel J0943+6150_S_2017_02_19_pus_map.mod ! Writing 77 model components to file: J0943+6150_S_2017_02_19_pus_map.mod wobs J0943+6150_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0943+6150_S_2017_02_19_pus_uvs.fits wwins J0943+6150_S_2017_02_19_pus_map.win ! wwins: Wrote 3 windows to J0943+6150_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000147868 Jy ! Component: 100 - total flux cleaned = 0.000215748 Jy ! Component: 150 - total flux cleaned = 0.000152028 Jy ! Component: 200 - total flux cleaned = 0.000213688 Jy ! Component: 250 - total flux cleaned = 0.000253143 Jy ! Component: 300 - total flux cleaned = 0.000292071 Jy ! Component: 350 - total flux cleaned = 0.000348792 Jy ! Component: 400 - total flux cleaned = 0.000404123 Jy ! Component: 450 - total flux cleaned = 0.000511959 Jy ! Component: 500 - total flux cleaned = 0.00058259 Jy ! Component: 550 - total flux cleaned = 0.000720924 Jy ! Component: 600 - total flux cleaned = 0.000805685 Jy ! Component: 650 - total flux cleaned = 0.00090558 Jy ! Component: 700 - total flux cleaned = 0.000987052 Jy ! Component: 750 - total flux cleaned = 0.00105133 Jy ! Component: 800 - total flux cleaned = 0.00108303 Jy ! Component: 850 - total flux cleaned = 0.00109901 Jy ! Component: 900 - total flux cleaned = 0.00114527 Jy ! Component: 950 - total flux cleaned = 0.00119044 Jy ! Component: 1000 - total flux cleaned = 0.00119052 Jy ! Component: 1050 - total flux cleaned = 0.0012638 Jy ! Component: 1100 - total flux cleaned = 0.00126378 Jy ! Component: 1150 - total flux cleaned = 0.00127805 Jy ! Component: 1200 - total flux cleaned = 0.00137649 Jy ! Component: 1250 - total flux cleaned = 0.00136234 Jy ! Component: 1300 - total flux cleaned = 0.00143098 Jy ! Component: 1350 - total flux cleaned = 0.00141734 Jy ! Component: 1400 - total flux cleaned = 0.00148448 Jy ! Component: 1450 - total flux cleaned = 0.00156412 Jy ! Component: 1500 - total flux cleaned = 0.00159038 Jy ! Component: 1550 - total flux cleaned = 0.00162922 Jy ! Component: 1600 - total flux cleaned = 0.00165478 Jy ! Component: 1650 - total flux cleaned = 0.00170535 Jy ! Component: 1700 - total flux cleaned = 0.00170523 Jy ! Component: 1750 - total flux cleaned = 0.00169274 Jy ! Component: 1800 - total flux cleaned = 0.00174197 Jy ! Component: 1850 - total flux cleaned = 0.00174204 Jy ! Component: 1900 - total flux cleaned = 0.0018145 Jy ! Component: 1950 - total flux cleaned = 0.00177865 Jy ! Component: 2000 - total flux cleaned = 0.0018141 Jy ! Component: 2050 - total flux cleaned = 0.00179065 Jy ! Component: 2100 - total flux cleaned = 0.00175557 Jy ! Component: 2150 - total flux cleaned = 0.00174405 Jy ! Component: 2200 - total flux cleaned = 0.00172115 Jy ! Component: 2250 - total flux cleaned = 0.00168701 Jy ! Component: 2300 - total flux cleaned = 0.00164205 Jy ! Component: 2350 - total flux cleaned = 0.00161983 Jy ! Component: 2400 - total flux cleaned = 0.00157556 Jy ! Component: 2450 - total flux cleaned = 0.00156461 Jy ! Component: 2500 - total flux cleaned = 0.00153196 Jy ! Component: 2550 - total flux cleaned = 0.00146716 Jy ! Component: 2600 - total flux cleaned = 0.00148851 Jy ! Component: 2650 - total flux cleaned = 0.00143527 Jy ! Component: 2700 - total flux cleaned = 0.00137193 Jy ! Component: 2750 - total flux cleaned = 0.00140333 Jy ! Component: 2800 - total flux cleaned = 0.00135132 Jy ! Component: 2850 - total flux cleaned = 0.00135126 Jy ! Component: 2900 - total flux cleaned = 0.00129988 Jy ! Component: 2950 - total flux cleaned = 0.00126932 Jy ! Component: 3000 - total flux cleaned = 0.00123894 Jy ! Component: 3050 - total flux cleaned = 0.00116859 Jy ! Component: 3100 - total flux cleaned = 0.00112859 Jy ! Component: 3150 - total flux cleaned = 0.00108876 Jy ! Component: 3200 - total flux cleaned = 0.00103948 Jy ! Component: 3250 - total flux cleaned = 0.00101006 Jy ! Component: 3300 - total flux cleaned = 0.000951635 Jy ! Component: 3350 - total flux cleaned = 0.000903164 Jy ! Component: 3400 - total flux cleaned = 0.000855007 Jy ! Component: 3450 - total flux cleaned = 0.000807145 Jy ! Component: 3500 - total flux cleaned = 0.000797633 Jy ! Component: 3550 - total flux cleaned = 0.000759823 Jy ! Component: 3600 - total flux cleaned = 0.000703501 Jy ! Component: 3650 - total flux cleaned = 0.000694146 Jy ! Component: 3700 - total flux cleaned = 0.000694085 Jy ! Component: 3750 - total flux cleaned = 0.000657066 Jy ! Component: 3800 - total flux cleaned = 0.000666262 Jy ! Component: 3850 - total flux cleaned = 0.000657072 Jy ! Component: 3900 - total flux cleaned = 0.000620742 Jy ! Component: 3950 - total flux cleaned = 0.000620736 Jy ! Component: 4000 - total flux cleaned = 0.000593747 Jy ! Component: 4050 - total flux cleaned = 0.000567025 Jy ! Total flux subtracted in 4096 components = 0.000549316 Jy ! Clean residual min=-0.000544 max=0.000498 Jy/beam ! Clean residual mean=0.000000 rms=0.000158 Jy/beam ! Combined flux in latest and established models = 0.0755968 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 351 components and 0.0755968 Jy ![Exited script file: muppet] wmap "J0943+6150_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.703 x 5.064 at -89.25 degrees (North through East) ! Clean map min=-0.0011105 max=0.069257 Jy/beam ! Writing clean map to FITS file: J0943+6150_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0692567 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000157461 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.682074 0.682074 1.36415 2.72829 5.45659 10.9132 21.8264 43.6527 87.3054 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.069 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.703 x 5.064 at -89.25 degrees (North through East) ! Clean map min=-0.0011105 max=0.069257 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0943+6150_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:47:50 2019