! Started logfile: J0942-0759_S_2017_05_01_pus_uvs.log on Wed May 1 18:33:07 2019 obs J0942-0759_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0942-0759_S_2017_05_01_pus_uva.fits ! AN table 1: 82 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.958808 visibilities/baseline/integration-bin. ! Found source: J0942-0759 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 14152 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0942-0759_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 344 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.860306Jy sigma=0.046259 ! Fit after self-cal, rms=0.851937Jy sigma=0.046227 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.997 mas, bmaj=8.222 mas, bpa=-7.866 degrees ! Estimated noise=590.299 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.062314 Jy ! Component: 100 - total flux cleaned = 0.0665305 Jy ! Total flux subtracted in 100 components = 0.0665305 Jy ! Clean residual min=-0.028877 max=0.031278 Jy/beam ! Clean residual mean=-0.000030 rms=0.008917 Jy/beam ! Combined flux in latest and established models = 0.0665305 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.0665305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134131Jy sigma=0.003152 ! Fit after self-cal, rms=0.134086Jy sigma=0.003149 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.667 mas, bmaj=9.486 mas, bpa=-6.646 degrees ! Estimated noise=471.461 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00318235 Jy ! Component: 100 - total flux cleaned = 0.000695354 Jy ! Component: 150 - total flux cleaned = -0.00154145 Jy ! Component: 200 - total flux cleaned = -0.00356426 Jy ! Total flux subtracted in 200 components = -0.00356426 Jy ! Clean residual min=-0.026982 max=0.030319 Jy/beam ! Clean residual mean=-0.000084 rms=0.007824 Jy/beam ! Combined flux in latest and established models = 0.0629662 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0629662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127490Jy sigma=0.003321 ! Fit after self-cal, rms=0.127412Jy sigma=0.003321 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.70 FD 0.58 HN 0.78 KP 0.68 ! LA 0.64 MK 0.81 NL 0.72 OV 0.67 ! PT 0.65 SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.60 HN 0.87 KP 0.65 ! LA 0.61 MK 0.76 NL 0.74 OV 0.68 ! PT 0.63 SC 0.94 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.74 FD 0.65 HN 0.78 KP 0.68 ! LA 0.65 MK 0.78 NL 0.75 OV 0.63 ! PT 0.62 SC 0.92 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.78 HN 0.85 KP 1.00* ! LA 28.84 MK 1.15 NL 1.00* OV 1.00* ! PT 0.74 SC 1.00* ! ! ! Fit before self-cal, rms=0.127412Jy sigma=0.003321 ! Fit after self-cal, rms=0.518203Jy sigma=0.000697 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.527 mas, bmaj=8.48 mas, bpa=-3.187 degrees ! Estimated noise=464.246 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265669 Jy ! Component: 100 - total flux cleaned = 0.00326764 Jy ! Component: 150 - total flux cleaned = 0.00341672 Jy ! Component: 200 - total flux cleaned = 0.00355062 Jy ! Total flux subtracted in 200 components = 0.00355062 Jy ! Clean residual min=-0.002004 max=0.002092 Jy/beam ! Clean residual mean=0.000004 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.0665169 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 19 components and 0.0665169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.518120Jy sigma=0.000695 ! Fit after self-cal, rms=0.518082Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.518082Jy sigma=0.000681 ! Fit after self-cal, rms=0.638489Jy sigma=0.000673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=8.419 mas, bpa=-3.757 degrees ! Estimated noise=463.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018073 Jy ! Component: 100 - total flux cleaned = 0.00274152 Jy ! Component: 150 - total flux cleaned = 0.00295678 Jy ! Component: 200 - total flux cleaned = 0.0030545 Jy ! Total flux subtracted in 200 components = 0.0030545 Jy ! Clean residual min=-0.001832 max=0.001721 Jy/beam ! Clean residual mean=0.000003 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.0695714 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 26 components and 0.0695714 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.638423Jy sigma=0.000672 ! Fit after self-cal, rms=0.638444Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116585 Jy ! Component: 100 - total flux cleaned = 0.00022666 Jy ! Component: 150 - total flux cleaned = 0.000302297 Jy ! Component: 200 - total flux cleaned = 0.000395438 Jy ! Total flux subtracted in 200 components = 0.000395438 Jy ! Clean residual min=-0.001812 max=0.001721 Jy/beam ! Clean residual mean=0.000003 rms=0.000428 Jy/beam ! Combined flux in latest and established models = 0.0699668 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 31 components and 0.0699668 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.638460Jy sigma=0.000672 ! Fit after self-cal, rms=0.638459Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.638459Jy sigma=0.000672 ! Fit after self-cal, rms=0.053310Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.463 mas, bmaj=8.367 mas, bpa=-3.909 degrees ! Estimated noise=463.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000940625 Jy ! Component: 100 - total flux cleaned = 0.00107724 Jy ! Component: 150 - total flux cleaned = 0.00117559 Jy ! Component: 200 - total flux cleaned = 0.00128638 Jy ! Total flux subtracted in 200 components = 0.00128638 Jy ! Clean residual min=-0.001419 max=0.001352 Jy/beam ! Clean residual mean=-0.000002 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.0712532 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 33 components and 0.0712532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053279Jy sigma=0.000663 ! Fit after self-cal, rms=0.053232Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.29667e-05 Jy ! Component: 100 - total flux cleaned = 0.000157567 Jy ! Component: 150 - total flux cleaned = 0.000225775 Jy ! Component: 200 - total flux cleaned = 0.000288092 Jy ! Total flux subtracted in 200 components = 0.000288092 Jy ! Clean residual min=-0.001420 max=0.001363 Jy/beam ! Clean residual mean=-0.000002 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 0.0715413 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 37 components and 0.0715413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053219Jy sigma=0.000662 ! Fit after self-cal, rms=0.053219Jy sigma=0.000662 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053219Jy sigma=0.000662 ! Fit after self-cal, rms=0.053072Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.833 mas, bmaj=13.95 mas, bpa=1.229 degrees ! Estimated noise=541.904 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000742018 Jy ! Component: 100 - total flux cleaned = 0.0010067 Jy ! Component: 150 - total flux cleaned = 0.00104401 Jy ! Component: 200 - total flux cleaned = 0.00107655 Jy ! Total flux subtracted in 200 components = 0.00107655 Jy ! Clean residual min=-0.001553 max=0.001218 Jy/beam ! Clean residual mean=-0.000003 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0726178 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 42 components and 0.0726178 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053072Jy sigma=0.000662 ! Fit after self-cal, rms=0.053067Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.84351e-05 Jy ! Component: 100 - total flux cleaned = 6.4169e-05 Jy ! Component: 150 - total flux cleaned = 8.15779e-05 Jy ! Component: 200 - total flux cleaned = 9.76098e-05 Jy ! Total flux subtracted in 200 components = 9.76098e-05 Jy ! Clean residual min=-0.001549 max=0.001219 Jy/beam ! Clean residual mean=-0.000003 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0727155 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.0727155 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053069Jy sigma=0.000662 ! Fit after self-cal, rms=0.053069Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=8.336 mas, bpa=-3.967 degrees ! Estimated noise=464.45 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.453 x 8.336 at -3.967 degrees (North through East) ! Clean map min=-0.0017726 max=0.085495 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.857 mas, bmaj=7.196 mas, bpa=-4.878 degrees ! Estimated noise=615.223 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0663518 Jy ! Component: 100 - total flux cleaned = 0.0797126 Jy ! Component: 150 - total flux cleaned = 0.0787822 Jy ! Component: 200 - total flux cleaned = 0.0777506 Jy ! Total flux subtracted in 200 components = 0.0777506 Jy ! Clean residual min=-0.002419 max=0.002373 Jy/beam ! Clean residual mean=-0.000000 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.0777506 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0777506 Jy ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=8.336 mas, bpa=-3.967 degrees ! Estimated noise=464.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0019726 Jy ! Component: 100 - total flux cleaned = -0.00241766 Jy ! Component: 150 - total flux cleaned = -0.00278576 Jy ! Component: 200 - total flux cleaned = -0.00304569 Jy ! Total flux subtracted in 200 components = -0.00304569 Jy ! Clean residual min=-0.001437 max=0.001460 Jy/beam ! Clean residual mean=-0.000002 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.0747049 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 0.0747049 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.833 mas, bmaj=13.95 mas, bpa=1.229 degrees ! Estimated noise=541.904 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108713 Jy ! Component: 100 - total flux cleaned = -0.00145439 Jy ! Component: 150 - total flux cleaned = -0.00150813 Jy ! Component: 200 - total flux cleaned = -0.00155338 Jy ! Total flux subtracted in 200 components = -0.00155338 Jy ! Clean residual min=-0.001557 max=0.001299 Jy/beam ! Clean residual mean=-0.000003 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.0731516 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.79278e-05 Jy ! Component: 100 - total flux cleaned = -7.14177e-05 Jy ! Component: 150 - total flux cleaned = -0.000101271 Jy ! Component: 200 - total flux cleaned = -0.000127615 Jy ! Total flux subtracted in 200 components = -0.000127615 Jy ! Clean residual min=-0.001569 max=0.001300 Jy/beam ! Clean residual mean=-0.000003 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.073024 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 25 components and 0.0730239 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.453 mas, bmaj=8.336 mas, bpa=-3.967 degrees ! Estimated noise=464.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.93487e-05 Jy ! Component: 100 - total flux cleaned = -8.40078e-05 Jy ! Component: 150 - total flux cleaned = -0.000165969 Jy ! Component: 200 - total flux cleaned = -0.000190149 Jy ! Total flux subtracted in 200 components = -0.000190149 Jy ! Clean residual min=-0.001375 max=0.001333 Jy/beam ! Clean residual mean=-0.000002 rms=0.000326 Jy/beam ! Combined flux in latest and established models = 0.0728338 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.0728338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.053110Jy sigma=0.000662 ! Fit after self-cal, rms=0.053123Jy sigma=0.000662 wmodel J0942-0759_S_2017_05_01_pus_map.mod ! Writing 33 model components to file: J0942-0759_S_2017_05_01_pus_map.mod wobs J0942-0759_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0942-0759_S_2017_05_01_pus_uvs.fits wwins J0942-0759_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J0942-0759_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000410802 Jy ! Component: 100 - total flux cleaned = -0.000849972 Jy ! Component: 150 - total flux cleaned = -0.00113338 Jy ! Component: 200 - total flux cleaned = -0.00132041 Jy ! Component: 250 - total flux cleaned = -0.00150073 Jy ! Component: 300 - total flux cleaned = -0.00169525 Jy ! Component: 350 - total flux cleaned = -0.00190351 Jy ! Component: 400 - total flux cleaned = -0.0021069 Jy ! Component: 450 - total flux cleaned = -0.002342 Jy ! Component: 500 - total flux cleaned = -0.0025013 Jy ! Component: 550 - total flux cleaned = -0.00265762 Jy ! Component: 600 - total flux cleaned = -0.00279432 Jy ! Component: 650 - total flux cleaned = -0.00292803 Jy ! Component: 700 - total flux cleaned = -0.0029775 Jy ! Component: 750 - total flux cleaned = -0.00307478 Jy ! Component: 800 - total flux cleaned = -0.00315445 Jy ! Component: 850 - total flux cleaned = -0.00318558 Jy ! Component: 900 - total flux cleaned = -0.00318529 Jy ! Component: 950 - total flux cleaned = -0.00324645 Jy ! Component: 1000 - total flux cleaned = -0.00333686 Jy ! Component: 1050 - total flux cleaned = -0.00336639 Jy ! Component: 1100 - total flux cleaned = -0.0033368 Jy ! Component: 1150 - total flux cleaned = -0.00339508 Jy ! Component: 1200 - total flux cleaned = -0.00333735 Jy ! Component: 1250 - total flux cleaned = -0.00342308 Jy ! Component: 1300 - total flux cleaned = -0.0033948 Jy ! Component: 1350 - total flux cleaned = -0.00335284 Jy ! Component: 1400 - total flux cleaned = -0.00338077 Jy ! Component: 1450 - total flux cleaned = -0.00335341 Jy ! Component: 1500 - total flux cleaned = -0.00335352 Jy ! Component: 1550 - total flux cleaned = -0.00332661 Jy ! Component: 1600 - total flux cleaned = -0.00339355 Jy ! Component: 1650 - total flux cleaned = -0.00332739 Jy ! Component: 1700 - total flux cleaned = -0.00334055 Jy ! Component: 1750 - total flux cleaned = -0.00334052 Jy ! Component: 1800 - total flux cleaned = -0.00331447 Jy ! Component: 1850 - total flux cleaned = -0.00328895 Jy ! Component: 1900 - total flux cleaned = -0.00327632 Jy ! Component: 1950 - total flux cleaned = -0.00322616 Jy ! Component: 2000 - total flux cleaned = -0.00328885 Jy ! Component: 2050 - total flux cleaned = -0.00327644 Jy ! Component: 2100 - total flux cleaned = -0.00325163 Jy ! Component: 2150 - total flux cleaned = -0.00322732 Jy ! Component: 2200 - total flux cleaned = -0.00322735 Jy ! Component: 2250 - total flux cleaned = -0.00321545 Jy ! Component: 2300 - total flux cleaned = -0.00321553 Jy ! Component: 2350 - total flux cleaned = -0.00323927 Jy ! Component: 2400 - total flux cleaned = -0.00323926 Jy ! Component: 2450 - total flux cleaned = -0.00319269 Jy ! Component: 2500 - total flux cleaned = -0.00322749 Jy ! Component: 2550 - total flux cleaned = -0.00321589 Jy ! Component: 2600 - total flux cleaned = -0.00317015 Jy ! Component: 2650 - total flux cleaned = -0.00323832 Jy ! Component: 2700 - total flux cleaned = -0.00321561 Jy ! Component: 2750 - total flux cleaned = -0.00322682 Jy ! Component: 2800 - total flux cleaned = -0.00328245 Jy ! Component: 2850 - total flux cleaned = -0.00329347 Jy ! Component: 2900 - total flux cleaned = -0.00332643 Jy ! Component: 2950 - total flux cleaned = -0.00330457 Jy ! Component: 3000 - total flux cleaned = -0.0033261 Jy ! Component: 3050 - total flux cleaned = -0.00331534 Jy ! Component: 3100 - total flux cleaned = -0.0033366 Jy ! Component: 3150 - total flux cleaned = -0.0033473 Jy ! Component: 3200 - total flux cleaned = -0.00341046 Jy ! Component: 3250 - total flux cleaned = -0.00341042 Jy ! Component: 3300 - total flux cleaned = -0.00341055 Jy ! Component: 3350 - total flux cleaned = -0.00346227 Jy ! Component: 3400 - total flux cleaned = -0.00346228 Jy ! Component: 3450 - total flux cleaned = -0.00345211 Jy ! Component: 3500 - total flux cleaned = -0.00348258 Jy ! Component: 3550 - total flux cleaned = -0.00350274 Jy ! Component: 3600 - total flux cleaned = -0.00351278 Jy ! Component: 3650 - total flux cleaned = -0.00350281 Jy ! Component: 3700 - total flux cleaned = -0.00351273 Jy ! Component: 3750 - total flux cleaned = -0.00352263 Jy ! Component: 3800 - total flux cleaned = -0.00353244 Jy ! Component: 3850 - total flux cleaned = -0.00352262 Jy ! Component: 3900 - total flux cleaned = -0.00356145 Jy ! Component: 3950 - total flux cleaned = -0.00357101 Jy ! Component: 4000 - total flux cleaned = -0.00356139 Jy ! Component: 4050 - total flux cleaned = -0.00352327 Jy ! Total flux subtracted in 4096 components = -0.0035327 Jy ! Clean residual min=-0.000511 max=0.000589 Jy/beam ! Clean residual mean=-0.000001 rms=0.000177 Jy/beam ! Combined flux in latest and established models = 0.0693011 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 315 components and 0.0693011 Jy ![Exited script file: muppet] wmap "J0942-0759_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.453 x 8.336 at -3.967 degrees (North through East) ! Clean map min=-0.0014154 max=0.084603 Jy/beam ! Writing clean map to FITS file: J0942-0759_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0846025 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000176089 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.624411 0.624411 1.24882 2.49765 4.99529 9.99058 19.9812 39.9623 79.9247 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.084 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.453 x 8.336 at -3.967 degrees (North through East) ! Clean map min=-0.0014154 max=0.084603 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0942-0759_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:33:11 2019