! Started logfile: J0941+2728_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:10:42 2019 obs J0941+2728_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0941+2728_S_2017_01_16_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.577011 visibilities/baseline/integration-bin. ! Found source: J0941+2728 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 12048 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0941+2728_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 288 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 288 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 288 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 486 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.908394Jy sigma=0.008295 ! Fit after self-cal, rms=0.900168Jy sigma=0.008246 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.873 mas, bmaj=7.003 mas, bpa=15.12 degrees ! Estimated noise=1067.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0806608 Jy ! Component: 100 - total flux cleaned = 0.0983806 Jy ! Total flux subtracted in 100 components = 0.0983806 Jy ! Clean residual min=-0.003621 max=0.005543 Jy/beam ! Clean residual mean=0.000003 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.0983806 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0983806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087854Jy sigma=0.000663 ! Fit after self-cal, rms=0.087882Jy sigma=0.000663 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.595 mas, bmaj=7.818 mas, bpa=14.86 degrees ! Estimated noise=759.637 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00603253 Jy ! Component: 100 - total flux cleaned = 0.0091655 Jy ! Component: 150 - total flux cleaned = 0.0112455 Jy ! Component: 200 - total flux cleaned = 0.0126686 Jy ! Total flux subtracted in 200 components = 0.0126686 Jy ! Clean residual min=-0.002615 max=0.002699 Jy/beam ! Clean residual mean=0.000010 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.111049 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 32 components and 0.111049 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087478Jy sigma=0.000659 ! Fit after self-cal, rms=0.087491Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 0.97 KP 0.97 ! LA 1.04 MK 1.00* NL 0.91 OV 0.99 ! PT 0.95 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.93 KP 0.98 ! LA 0.99 MK 1.00* NL 1.08 OV 1.02 ! PT 0.97 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00 HN 0.98 KP 1.00 ! LA 0.99 MK 1.00* NL 1.06 OV 0.95 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.09 HN 0.98 KP 1.00* ! LA 1.04 MK 1.00* NL 1.00* OV 0.92 ! PT 0.97 SC 1.17 ! ! ! Fit before self-cal, rms=0.087491Jy sigma=0.000659 ! Fit after self-cal, rms=0.092540Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.59 mas, bmaj=7.826 mas, bpa=13.98 degrees ! Estimated noise=757.344 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000653855 Jy ! Component: 100 - total flux cleaned = 0.000615002 Jy ! Component: 150 - total flux cleaned = 0.000549761 Jy ! Component: 200 - total flux cleaned = 0.00050176 Jy ! Total flux subtracted in 200 components = 0.00050176 Jy ! Clean residual min=-0.002051 max=0.002144 Jy/beam ! Clean residual mean=0.000010 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.111551 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.111551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092509Jy sigma=0.000655 ! Fit after self-cal, rms=0.092557Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092557Jy sigma=0.000655 ! Fit after self-cal, rms=0.086591Jy sigma=0.000653 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.581 mas, bmaj=7.82 mas, bpa=13.76 degrees ! Estimated noise=758.555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000532564 Jy ! Component: 100 - total flux cleaned = 0.000445386 Jy ! Component: 150 - total flux cleaned = 0.000375876 Jy ! Component: 200 - total flux cleaned = 0.000317402 Jy ! Total flux subtracted in 200 components = 0.000317402 Jy ! Clean residual min=-0.001807 max=0.001785 Jy/beam ! Clean residual mean=0.000007 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.111868 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 0.111868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086578Jy sigma=0.000653 ! Fit after self-cal, rms=0.086610Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.65905e-05 Jy ! Component: 100 - total flux cleaned = -0.000120927 Jy ! Component: 150 - total flux cleaned = -0.000150915 Jy ! Component: 200 - total flux cleaned = -0.000177504 Jy ! Total flux subtracted in 200 components = -0.000177504 Jy ! Clean residual min=-0.001786 max=0.001760 Jy/beam ! Clean residual mean=0.000008 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.111691 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 57 components and 0.111691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086607Jy sigma=0.000652 ! Fit after self-cal, rms=0.086607Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086607Jy sigma=0.000652 ! Fit after self-cal, rms=0.086171Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.575 mas, bmaj=7.819 mas, bpa=13.57 degrees ! Estimated noise=758.893 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000247509 Jy ! Component: 100 - total flux cleaned = 0.000201667 Jy ! Component: 150 - total flux cleaned = 0.000153239 Jy ! Component: 200 - total flux cleaned = 0.000120655 Jy ! Total flux subtracted in 200 components = 0.000120655 Jy ! Clean residual min=-0.001717 max=0.001742 Jy/beam ! Clean residual mean=0.000007 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.111811 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.111812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086167Jy sigma=0.000652 ! Fit after self-cal, rms=0.086178Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.11424e-06 Jy ! Component: 100 - total flux cleaned = -3.45868e-05 Jy ! Component: 150 - total flux cleaned = -4.03098e-05 Jy ! Component: 200 - total flux cleaned = -5.11796e-05 Jy ! Total flux subtracted in 200 components = -5.11796e-05 Jy ! Clean residual min=-0.001704 max=0.001723 Jy/beam ! Clean residual mean=0.000007 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.11176 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 63 components and 0.11176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086176Jy sigma=0.000652 ! Fit after self-cal, rms=0.086177Jy sigma=0.000652 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086177Jy sigma=0.000652 ! Fit after self-cal, rms=0.086206Jy sigma=0.000652 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.222 mas, bmaj=9.785 mas, bpa=2.118 degrees ! Estimated noise=865.092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000251847 Jy ! Component: 100 - total flux cleaned = 0.000231156 Jy ! Component: 150 - total flux cleaned = 0.000214975 Jy ! Component: 200 - total flux cleaned = 0.000210461 Jy ! Total flux subtracted in 200 components = 0.000210461 Jy ! Clean residual min=-0.001952 max=0.001692 Jy/beam ! Clean residual mean=0.000012 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.111971 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 68 components and 0.111971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086205Jy sigma=0.000652 ! Fit after self-cal, rms=0.086210Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.55593e-05 Jy ! Component: 100 - total flux cleaned = 1.70044e-06 Jy ! Component: 150 - total flux cleaned = -6.12883e-06 Jy ! Component: 200 - total flux cleaned = -1.33894e-05 Jy ! Total flux subtracted in 200 components = -1.33894e-05 Jy ! Clean residual min=-0.001952 max=0.001690 Jy/beam ! Clean residual mean=0.000012 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.111957 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 81 components and 0.111957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086210Jy sigma=0.000652 ! Fit after self-cal, rms=0.086210Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.571 mas, bmaj=7.82 mas, bpa=13.47 degrees ! Estimated noise=759.434 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.571 x 7.82 at 13.47 degrees (North through East) ! Clean map min=-0.0016599 max=0.10399 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.86 mas, bmaj=6.992 mas, bpa=13.8 degrees ! Estimated noise=1062.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0801966 Jy ! Component: 100 - total flux cleaned = 0.0980226 Jy ! Component: 150 - total flux cleaned = 0.104747 Jy ! Component: 200 - total flux cleaned = 0.108185 Jy ! Total flux subtracted in 200 components = 0.108185 Jy ! Clean residual min=-0.002613 max=0.002601 Jy/beam ! Clean residual mean=0.000001 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.108185 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.108185 Jy ! Inverting map and beam ! Estimated beam: bmin=4.571 mas, bmaj=7.82 mas, bpa=13.47 degrees ! Estimated noise=759.434 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00235062 Jy ! Component: 100 - total flux cleaned = 0.00333571 Jy ! Component: 150 - total flux cleaned = 0.00357143 Jy ! Component: 200 - total flux cleaned = 0.00374051 Jy ! Total flux subtracted in 200 components = 0.00374051 Jy ! Clean residual min=-0.001758 max=0.001714 Jy/beam ! Clean residual mean=0.000007 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.111926 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 45 components and 0.111926 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.222 mas, bmaj=9.785 mas, bpa=2.118 degrees ! Estimated noise=865.092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00067856 Jy ! Component: 100 - total flux cleaned = 0.000898637 Jy ! Component: 150 - total flux cleaned = 0.00100923 Jy ! Component: 200 - total flux cleaned = 0.00103359 Jy ! Total flux subtracted in 200 components = 0.00103359 Jy ! Clean residual min=-0.002083 max=0.001689 Jy/beam ! Clean residual mean=0.000013 rms=0.000486 Jy/beam ! Combined flux in latest and established models = 0.11296 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.26096e-05 Jy ! Component: 100 - total flux cleaned = 4.24082e-05 Jy ! Component: 150 - total flux cleaned = 6.95397e-05 Jy ! Component: 200 - total flux cleaned = 7.78494e-05 Jy ! Total flux subtracted in 200 components = 7.78494e-05 Jy ! Clean residual min=-0.002093 max=0.001690 Jy/beam ! Clean residual mean=0.000013 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.113037 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 84 components and 0.113037 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.571 mas, bmaj=7.82 mas, bpa=13.47 degrees ! Estimated noise=759.434 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000175172 Jy ! Component: 100 - total flux cleaned = -0.000159626 Jy ! Component: 150 - total flux cleaned = -0.000145501 Jy ! Component: 200 - total flux cleaned = -0.000145421 Jy ! Total flux subtracted in 200 components = -0.000145421 Jy ! Clean residual min=-0.001713 max=0.001730 Jy/beam ! Clean residual mean=0.000008 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.112892 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 95 components and 0.112892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086196Jy sigma=0.000652 ! Fit after self-cal, rms=0.086183Jy sigma=0.000652 wmodel J0941+2728_S_2017_01_16_pus_map.mod ! Writing 95 model components to file: J0941+2728_S_2017_01_16_pus_map.mod wobs J0941+2728_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0941+2728_S_2017_01_16_pus_uvs.fits wwins J0941+2728_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J0941+2728_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000219441 Jy ! Component: 100 - total flux cleaned = 0.000275653 Jy ! Component: 150 - total flux cleaned = 0.000328055 Jy ! Component: 200 - total flux cleaned = 0.00040416 Jy ! Component: 250 - total flux cleaned = 0.000452006 Jy ! Component: 300 - total flux cleaned = 0.00059115 Jy ! Component: 350 - total flux cleaned = 0.000726098 Jy ! Component: 400 - total flux cleaned = 0.000791282 Jy ! Component: 450 - total flux cleaned = 0.000748799 Jy ! Component: 500 - total flux cleaned = 0.000748545 Jy ! Component: 550 - total flux cleaned = 0.000687128 Jy ! Component: 600 - total flux cleaned = 0.000607531 Jy ! Component: 650 - total flux cleaned = 0.000548654 Jy ! Component: 700 - total flux cleaned = 0.000413961 Jy ! Component: 750 - total flux cleaned = 0.00041407 Jy ! Component: 800 - total flux cleaned = 0.000302313 Jy ! Component: 850 - total flux cleaned = 0.000302385 Jy ! Component: 900 - total flux cleaned = 0.000230139 Jy ! Component: 950 - total flux cleaned = 0.000194555 Jy ! Component: 1000 - total flux cleaned = 0.000107226 Jy ! Component: 1050 - total flux cleaned = 7.29353e-05 Jy ! Component: 1100 - total flux cleaned = 4.52768e-06 Jy ! Component: 1150 - total flux cleaned = -0.000145744 Jy ! Component: 1200 - total flux cleaned = -0.000195008 Jy ! Component: 1250 - total flux cleaned = -0.000243976 Jy ! Component: 1300 - total flux cleaned = -0.0003403 Jy ! Component: 1350 - total flux cleaned = -0.000403909 Jy ! Component: 1400 - total flux cleaned = -0.000513185 Jy ! Component: 1450 - total flux cleaned = -0.000559425 Jy ! Component: 1500 - total flux cleaned = -0.000651189 Jy ! Component: 1550 - total flux cleaned = -0.000741857 Jy ! Component: 1600 - total flux cleaned = -0.000816466 Jy ! Component: 1650 - total flux cleaned = -0.000934474 Jy ! Component: 1700 - total flux cleaned = -0.00100724 Jy ! Component: 1750 - total flux cleaned = -0.00113739 Jy ! Component: 1800 - total flux cleaned = -0.00119451 Jy ! Component: 1850 - total flux cleaned = -0.00127915 Jy ! Component: 1900 - total flux cleaned = -0.00134918 Jy ! Component: 1950 - total flux cleaned = -0.00140474 Jy ! Component: 2000 - total flux cleaned = -0.00150081 Jy ! Component: 2050 - total flux cleaned = -0.00156879 Jy ! Component: 2100 - total flux cleaned = -0.00159589 Jy ! Component: 2150 - total flux cleaned = -0.00168943 Jy ! Component: 2200 - total flux cleaned = -0.00176868 Jy ! Component: 2250 - total flux cleaned = -0.00179472 Jy ! Component: 2300 - total flux cleaned = -0.00188572 Jy ! Component: 2350 - total flux cleaned = -0.00193726 Jy ! Component: 2400 - total flux cleaned = -0.0019756 Jy ! Component: 2450 - total flux cleaned = -0.00208974 Jy ! Component: 2500 - total flux cleaned = -0.00212746 Jy ! Component: 2550 - total flux cleaned = -0.00222712 Jy ! Component: 2600 - total flux cleaned = -0.00227644 Jy ! Component: 2650 - total flux cleaned = -0.00233769 Jy ! Component: 2700 - total flux cleaned = -0.00242287 Jy ! Component: 2750 - total flux cleaned = -0.00247137 Jy ! Component: 2800 - total flux cleaned = -0.00256743 Jy ! Component: 2850 - total flux cleaned = -0.00259127 Jy ! Component: 2900 - total flux cleaned = -0.00265052 Jy ! Component: 2950 - total flux cleaned = -0.00276813 Jy ! Component: 3000 - total flux cleaned = -0.00279138 Jy ! Component: 3050 - total flux cleaned = -0.00280299 Jy ! Component: 3100 - total flux cleaned = -0.00287227 Jy ! Component: 3150 - total flux cleaned = -0.0029181 Jy ! Component: 3200 - total flux cleaned = -0.00297496 Jy ! Component: 3250 - total flux cleaned = -0.00298619 Jy ! Component: 3300 - total flux cleaned = -0.00304239 Jy ! Component: 3350 - total flux cleaned = -0.00310934 Jy ! Component: 3400 - total flux cleaned = -0.00314253 Jy ! Component: 3450 - total flux cleaned = -0.00323062 Jy ! Component: 3500 - total flux cleaned = -0.00325256 Jy ! Component: 3550 - total flux cleaned = -0.00329599 Jy ! Component: 3600 - total flux cleaned = -0.00335011 Jy ! Component: 3650 - total flux cleaned = -0.0033823 Jy ! Component: 3700 - total flux cleaned = -0.00344632 Jy ! Component: 3750 - total flux cleaned = -0.00348879 Jy ! Component: 3800 - total flux cleaned = -0.00350979 Jy ! Component: 3850 - total flux cleaned = -0.0035518 Jy ! Component: 3900 - total flux cleaned = -0.00358305 Jy ! Component: 3950 - total flux cleaned = -0.00364521 Jy ! Component: 4000 - total flux cleaned = -0.00366584 Jy ! Component: 4050 - total flux cleaned = -0.00369657 Jy ! Total flux subtracted in 4096 components = -0.00374745 Jy ! Clean residual min=-0.000677 max=0.000621 Jy/beam ! Clean residual mean=0.000002 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.109144 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 376 components and 0.109144 Jy ![Exited script file: muppet] wmap "J0941+2728_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.571 x 7.82 at 13.47 degrees (North through East) ! Clean map min=-0.0014263 max=0.10334 Jy/beam ! Writing clean map to FITS file: J0941+2728_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.10334 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000195883 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.568657 0.568657 1.13731 2.27463 4.54925 9.09851 18.197 36.394 72.7881 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.103 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.571 x 7.82 at 13.47 degrees (North through East) ! Clean map min=-0.0014263 max=0.10334 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0941+2728_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:10:47 2019