! Started logfile: J0933-0819_S_2017_04_28_pus_uvs.log on Thu May 2 16:22:36 2019 obs J0933-0819_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0933-0819_S_2017_04_28_pus_uva.fits ! AN table 1: 84 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.956878 visibilities/baseline/integration-bin. ! Found source: J0933-0819 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 14468 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0933-0819_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 352 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.770872Jy sigma=0.020454 ! Fit after self-cal, rms=0.765347Jy sigma=0.020434 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=7.477 mas, bpa=-4.918 degrees ! Estimated noise=980.211 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.147888 Jy ! Component: 100 - total flux cleaned = 0.180521 Jy ! Total flux subtracted in 100 components = 0.180521 Jy ! Clean residual min=-0.039168 max=0.044890 Jy/beam ! Clean residual mean=-0.000010 rms=0.013490 Jy/beam ! Combined flux in latest and established models = 0.180521 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.180521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137806Jy sigma=0.003516 ! Fit after self-cal, rms=0.137771Jy sigma=0.003516 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.478 mas, bmaj=8.536 mas, bpa=-3.438 degrees ! Estimated noise=704.033 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00331685 Jy ! Component: 100 - total flux cleaned = 0.00134113 Jy ! Component: 150 - total flux cleaned = 0.000362381 Jy ! Component: 200 - total flux cleaned = -0.000443411 Jy ! Total flux subtracted in 200 components = -0.000443411 Jy ! Clean residual min=-0.038936 max=0.043568 Jy/beam ! Clean residual mean=0.000033 rms=0.012297 Jy/beam ! Combined flux in latest and established models = 0.180077 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 9 components and 0.180077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133500Jy sigma=0.003598 ! Fit after self-cal, rms=0.133515Jy sigma=0.003598 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.80 FD 0.83 HN 0.91 KP 0.87 ! LA 0.82 MK 0.94 NL 0.82 OV 0.86 ! PT 0.93 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.75 HN 0.98 KP 0.82 ! LA 0.78 MK 1.08 NL 0.97 OV 0.85 ! PT 0.91 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.84 FD 0.77 HN 0.94 KP 0.87 ! LA 0.83 MK 0.94 NL 0.92 OV 0.79 ! PT 0.89 SC 1.01 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.73 HN 0.98 KP 1.00* ! LA 26.76 MK 1.09 NL 1.00* OV 1.00* ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.133515Jy sigma=0.003598 ! Fit after self-cal, rms=1.546371Jy sigma=0.000768 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.435 mas, bmaj=8.277 mas, bpa=-2.2 degrees ! Estimated noise=720.528 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00860314 Jy ! Component: 100 - total flux cleaned = 0.0123311 Jy ! Component: 150 - total flux cleaned = 0.0127317 Jy ! Component: 200 - total flux cleaned = 0.0127294 Jy ! Total flux subtracted in 200 components = 0.0127294 Jy ! Clean residual min=-0.004937 max=0.004793 Jy/beam ! Clean residual mean=0.000031 rms=0.001267 Jy/beam ! Combined flux in latest and established models = 0.192807 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 26 components and 0.192807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.545405Jy sigma=0.000767 ! Fit after self-cal, rms=1.545857Jy sigma=0.000761 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.545857Jy sigma=0.000761 ! Fit after self-cal, rms=1.669119Jy sigma=0.000710 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.402 mas, bmaj=8.396 mas, bpa=-2.37 degrees ! Estimated noise=740.424 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00591629 Jy ! Component: 100 - total flux cleaned = 0.00608333 Jy ! Component: 150 - total flux cleaned = 0.00608014 Jy ! Component: 200 - total flux cleaned = 0.00608256 Jy ! Total flux subtracted in 200 components = 0.00608256 Jy ! Clean residual min=-0.003838 max=0.003672 Jy/beam ! Clean residual mean=0.000012 rms=0.000954 Jy/beam ! Combined flux in latest and established models = 0.198889 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 31 components and 0.198889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.668473Jy sigma=0.000709 ! Fit after self-cal, rms=1.668483Jy sigma=0.000708 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.49381e-06 Jy ! Component: 100 - total flux cleaned = 1.39616e-05 Jy ! Component: 150 - total flux cleaned = 1.65458e-05 Jy ! Component: 200 - total flux cleaned = 1.66623e-05 Jy ! Total flux subtracted in 200 components = 1.66623e-05 Jy ! Clean residual min=-0.003641 max=0.003679 Jy/beam ! Clean residual mean=0.000012 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.198906 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.198906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.668339Jy sigma=0.000709 ! Fit after self-cal, rms=1.668341Jy sigma=0.000709 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.668341Jy sigma=0.000709 ! Fit after self-cal, rms=0.142617Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=8.366 mas, bpa=-2.525 degrees ! Estimated noise=741.684 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00171301 Jy ! Component: 100 - total flux cleaned = 0.00210776 Jy ! Component: 150 - total flux cleaned = 0.00226664 Jy ! Component: 200 - total flux cleaned = 0.00230117 Jy ! Total flux subtracted in 200 components = 0.00230117 Jy ! Clean residual min=-0.002144 max=0.002249 Jy/beam ! Clean residual mean=-0.000000 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.201207 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.201207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142474Jy sigma=0.000673 ! Fit after self-cal, rms=0.142399Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155596 Jy ! Component: 100 - total flux cleaned = 0.000212479 Jy ! Component: 150 - total flux cleaned = 0.000212403 Jy ! Component: 200 - total flux cleaned = 0.000189609 Jy ! Total flux subtracted in 200 components = 0.000189609 Jy ! Clean residual min=-0.002179 max=0.002195 Jy/beam ! Clean residual mean=0.000000 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.201397 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 47 components and 0.201397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142352Jy sigma=0.000672 ! Fit after self-cal, rms=0.142348Jy sigma=0.000672 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142348Jy sigma=0.000672 ! Fit after self-cal, rms=0.143894Jy sigma=0.000672 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.653 mas, bmaj=13.98 mas, bpa=1.364 degrees ! Estimated noise=887.203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00140655 Jy ! Component: 100 - total flux cleaned = 0.00143571 Jy ! Component: 150 - total flux cleaned = 0.00145602 Jy ! Component: 200 - total flux cleaned = 0.00142684 Jy ! Total flux subtracted in 200 components = 0.00142684 Jy ! Clean residual min=-0.002088 max=0.002254 Jy/beam ! Clean residual mean=-0.000001 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.202824 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 58 components and 0.202824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143792Jy sigma=0.000672 ! Fit after self-cal, rms=0.143789Jy sigma=0.000672 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.98922e-05 Jy ! Component: 100 - total flux cleaned = -4.18473e-05 Jy ! Component: 150 - total flux cleaned = -5.19456e-05 Jy ! Component: 200 - total flux cleaned = -6.05779e-05 Jy ! Total flux subtracted in 200 components = -6.05779e-05 Jy ! Clean residual min=-0.002067 max=0.002256 Jy/beam ! Clean residual mean=-0.000001 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.202763 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 59 components and 0.202763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143759Jy sigma=0.000672 ! Fit after self-cal, rms=0.143756Jy sigma=0.000672 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=8.362 mas, bpa=-2.542 degrees ! Estimated noise=745.595 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.386 x 8.362 at -2.542 degrees (North through East) ! Clean map min=-0.0029024 max=0.20739 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.785 mas, bmaj=7.425 mas, bpa=-4.027 degrees ! Estimated noise=1048.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.158519 Jy ! Component: 100 - total flux cleaned = 0.193111 Jy ! Component: 150 - total flux cleaned = 0.202236 Jy ! Component: 200 - total flux cleaned = 0.205513 Jy ! Total flux subtracted in 200 components = 0.205513 Jy ! Clean residual min=-0.003958 max=0.002887 Jy/beam ! Clean residual mean=0.000002 rms=0.000738 Jy/beam ! Combined flux in latest and established models = 0.205513 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.205513 Jy ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=8.362 mas, bpa=-2.542 degrees ! Estimated noise=745.595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000224142 Jy ! Component: 100 - total flux cleaned = 5.39889e-05 Jy ! Component: 150 - total flux cleaned = -8.95333e-05 Jy ! Component: 200 - total flux cleaned = -8.68213e-05 Jy ! Total flux subtracted in 200 components = -8.68213e-05 Jy ! Clean residual min=-0.002723 max=0.002263 Jy/beam ! Clean residual mean=-0.000000 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.205426 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 20 components and 0.205426 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.653 mas, bmaj=13.98 mas, bpa=1.364 degrees ! Estimated noise=887.203 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000430354 Jy ! Component: 100 - total flux cleaned = -0.000563606 Jy ! Component: 150 - total flux cleaned = -0.000681127 Jy ! Component: 200 - total flux cleaned = -0.000817479 Jy ! Total flux subtracted in 200 components = -0.000817479 Jy ! Clean residual min=-0.002304 max=0.002305 Jy/beam ! Clean residual mean=-0.000000 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.204609 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.90798e-05 Jy ! Component: 100 - total flux cleaned = -0.000248189 Jy ! Component: 150 - total flux cleaned = -0.000345993 Jy ! Component: 200 - total flux cleaned = -0.000480894 Jy ! Total flux subtracted in 200 components = -0.000480894 Jy ! Clean residual min=-0.002192 max=0.002290 Jy/beam ! Clean residual mean=-0.000001 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.204128 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 27 components and 0.204128 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=8.362 mas, bpa=-2.542 degrees ! Estimated noise=745.595 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000264068 Jy ! Component: 100 - total flux cleaned = 2.35647e-05 Jy ! Component: 150 - total flux cleaned = -3.59307e-05 Jy ! Component: 200 - total flux cleaned = -9.14614e-05 Jy ! Total flux subtracted in 200 components = -9.14614e-05 Jy ! Clean residual min=-0.002385 max=0.002322 Jy/beam ! Clean residual mean=-0.000000 rms=0.000563 Jy/beam ! Combined flux in latest and established models = 0.204037 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.204037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143730Jy sigma=0.000672 ! Fit after self-cal, rms=0.143714Jy sigma=0.000672 wmodel J0933-0819_S_2017_04_28_pus_map.mod ! Writing 35 model components to file: J0933-0819_S_2017_04_28_pus_map.mod wobs J0933-0819_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0933-0819_S_2017_04_28_pus_uvs.fits wwins J0933-0819_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J0933-0819_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.02684e-05 Jy ! Component: 100 - total flux cleaned = -2.42032e-05 Jy ! Component: 150 - total flux cleaned = -5.99445e-05 Jy ! Component: 200 - total flux cleaned = -0.000130671 Jy ! Component: 250 - total flux cleaned = -0.000234607 Jy ! Component: 300 - total flux cleaned = -0.000403257 Jy ! Component: 350 - total flux cleaned = -0.000633062 Jy ! Component: 400 - total flux cleaned = -0.000793447 Jy ! Component: 450 - total flux cleaned = -0.00107651 Jy ! Component: 500 - total flux cleaned = -0.00120019 Jy ! Component: 550 - total flux cleaned = -0.00141344 Jy ! Component: 600 - total flux cleaned = -0.00159282 Jy ! Component: 650 - total flux cleaned = -0.00168117 Jy ! Component: 700 - total flux cleaned = -0.00182587 Jy ! Component: 750 - total flux cleaned = -0.00196798 Jy ! Component: 800 - total flux cleaned = -0.00208002 Jy ! Component: 850 - total flux cleaned = -0.0022732 Jy ! Component: 900 - total flux cleaned = -0.00238185 Jy ! Component: 950 - total flux cleaned = -0.00243575 Jy ! Component: 1000 - total flux cleaned = -0.00254244 Jy ! Component: 1050 - total flux cleaned = -0.00264713 Jy ! Component: 1100 - total flux cleaned = -0.00267278 Jy ! Component: 1150 - total flux cleaned = -0.00274959 Jy ! Component: 1200 - total flux cleaned = -0.00277518 Jy ! Component: 1250 - total flux cleaned = -0.00282536 Jy ! Component: 1300 - total flux cleaned = -0.00282555 Jy ! Component: 1350 - total flux cleaned = -0.00285039 Jy ! Component: 1400 - total flux cleaned = -0.00294814 Jy ! Component: 1450 - total flux cleaned = -0.00292387 Jy ! Component: 1500 - total flux cleaned = -0.00301941 Jy ! Component: 1550 - total flux cleaned = -0.00297251 Jy ! Component: 1600 - total flux cleaned = -0.00299603 Jy ! Component: 1650 - total flux cleaned = -0.00301919 Jy ! Component: 1700 - total flux cleaned = -0.00299584 Jy ! Component: 1750 - total flux cleaned = -0.00285919 Jy ! Component: 1800 - total flux cleaned = -0.00290464 Jy ! Component: 1850 - total flux cleaned = -0.00283745 Jy ! Component: 1900 - total flux cleaned = -0.0028596 Jy ! Component: 1950 - total flux cleaned = -0.00283751 Jy ! Component: 2000 - total flux cleaned = -0.00281549 Jy ! Component: 2050 - total flux cleaned = -0.00285896 Jy ! Component: 2100 - total flux cleaned = -0.0027946 Jy ! Component: 2150 - total flux cleaned = -0.00283726 Jy ! Component: 2200 - total flux cleaned = -0.0028798 Jy ! Component: 2250 - total flux cleaned = -0.00281649 Jy ! Component: 2300 - total flux cleaned = -0.00275368 Jy ! Component: 2350 - total flux cleaned = -0.00271252 Jy ! Component: 2400 - total flux cleaned = -0.00273316 Jy ! Component: 2450 - total flux cleaned = -0.00271276 Jy ! Component: 2500 - total flux cleaned = -0.00273278 Jy ! Component: 2550 - total flux cleaned = -0.00271255 Jy ! Component: 2600 - total flux cleaned = -0.00277277 Jy ! Component: 2650 - total flux cleaned = -0.00273286 Jy ! Component: 2700 - total flux cleaned = -0.00267332 Jy ! Component: 2750 - total flux cleaned = -0.00275222 Jy ! Component: 2800 - total flux cleaned = -0.00281093 Jy ! Component: 2850 - total flux cleaned = -0.00273291 Jy ! Component: 2900 - total flux cleaned = -0.00281034 Jy ! Component: 2950 - total flux cleaned = -0.00279106 Jy ! Component: 3000 - total flux cleaned = -0.00288648 Jy ! Component: 3050 - total flux cleaned = -0.0027914 Jy ! Component: 3100 - total flux cleaned = -0.0027915 Jy ! Component: 3150 - total flux cleaned = -0.0028856 Jy ! Component: 3200 - total flux cleaned = -0.00282929 Jy ! Component: 3250 - total flux cleaned = -0.00284795 Jy ! Component: 3300 - total flux cleaned = -0.00294056 Jy ! Component: 3350 - total flux cleaned = -0.00297735 Jy ! Component: 3400 - total flux cleaned = -0.00299566 Jy ! Component: 3450 - total flux cleaned = -0.00303212 Jy ! Component: 3500 - total flux cleaned = -0.00299591 Jy ! Component: 3550 - total flux cleaned = -0.00308614 Jy ! Component: 3600 - total flux cleaned = -0.00306806 Jy ! Component: 3650 - total flux cleaned = -0.00305012 Jy ! Component: 3700 - total flux cleaned = -0.00303237 Jy ! Component: 3750 - total flux cleaned = -0.00308545 Jy ! Component: 3800 - total flux cleaned = -0.00310303 Jy ! Component: 3850 - total flux cleaned = -0.00308558 Jy ! Component: 3900 - total flux cleaned = -0.00312045 Jy ! Component: 3950 - total flux cleaned = -0.0031204 Jy ! Component: 4000 - total flux cleaned = -0.00310304 Jy ! Component: 4050 - total flux cleaned = -0.003086 Jy ! Total flux subtracted in 4096 components = -0.00315466 Jy ! Clean residual min=-0.001321 max=0.001064 Jy/beam ! Clean residual mean=-0.000000 rms=0.000317 Jy/beam ! Combined flux in latest and established models = 0.200882 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 339 components and 0.200882 Jy ![Exited script file: muppet] wmap "J0933-0819_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.386 x 8.362 at -2.542 degrees (North through East) ! Clean map min=-0.0029788 max=0.20746 Jy/beam ! Writing clean map to FITS file: J0933-0819_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.207462 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000314582 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.4549 0.4549 0.909801 1.8196 3.6392 7.27841 14.5568 29.1136 58.2273 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.207 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.386 x 8.362 at -2.542 degrees (North through East) ! Clean map min=-0.0029788 max=0.20746 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0933-0819_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:22:40 2019