! Started logfile: J0933+1009_S_2017_10_21_pus_uvs.log on Sat May 11 20:55:29 2019 obs J0933+1009_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0933+1009_S_2017_10_21_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.983989 visibilities/baseline/integration-bin. ! Found source: J0933+1009 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 20404 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0933+1009_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 647 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.968176Jy sigma=0.009536 ! Fit after self-cal, rms=0.947417Jy sigma=0.009370 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.891 mas, bmaj=13.61 mas, bpa=-17.91 degrees ! Estimated noise=842.429 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0421358 Jy ! Component: 100 - total flux cleaned = 0.0514404 Jy ! Total flux subtracted in 100 components = 0.0514404 Jy ! Clean residual min=-0.003053 max=0.003456 Jy/beam ! Clean residual mean=0.000009 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.0514404 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0514404 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080298Jy sigma=0.000711 ! Fit after self-cal, rms=0.080057Jy sigma=0.000710 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.536 mas, bmaj=13.32 mas, bpa=-17.71 degrees ! Estimated noise=572.044 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00491974 Jy ! Component: 100 - total flux cleaned = 0.00726449 Jy ! Component: 150 - total flux cleaned = 0.00870073 Jy ! Component: 200 - total flux cleaned = 0.00971101 Jy ! Total flux subtracted in 200 components = 0.00971101 Jy ! Clean residual min=-0.002221 max=0.002774 Jy/beam ! Clean residual mean=0.000002 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.0611514 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 30 components and 0.0611514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079736Jy sigma=0.000707 ! Fit after self-cal, rms=0.079726Jy sigma=0.000707 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 1.03 KP 1.11 ! LA 1.04 MK 1.06 NL 0.98 OV 0.98 ! PT 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.94 HN 1.05 KP 1.08 ! LA 1.05 MK 1.05 NL 0.99 OV 1.01 ! PT 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00 HN 1.00 KP 1.16 ! LA 0.82 MK 1.05 NL 1.12 OV 1.13 ! PT 0.87 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 0.90 KP 1.00* ! LA 0.81 MK 0.98 NL 1.00* OV 1.00* ! PT 0.73 ! ! ! Fit before self-cal, rms=0.079726Jy sigma=0.000707 ! Fit after self-cal, rms=0.077419Jy sigma=0.000703 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.587 mas, bmaj=13.33 mas, bpa=-17.61 degrees ! Estimated noise=569.533 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000445172 Jy ! Component: 100 - total flux cleaned = -0.000448686 Jy ! Component: 150 - total flux cleaned = -0.000369111 Jy ! Component: 200 - total flux cleaned = -0.000297468 Jy ! Total flux subtracted in 200 components = -0.000297468 Jy ! Clean residual min=-0.001918 max=0.001551 Jy/beam ! Clean residual mean=-0.000001 rms=0.000424 Jy/beam ! Combined flux in latest and established models = 0.060854 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.060854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077404Jy sigma=0.000703 ! Fit after self-cal, rms=0.077518Jy sigma=0.000702 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077518Jy sigma=0.000702 ! Fit after self-cal, rms=0.078760Jy sigma=0.000700 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.604 mas, bmaj=13.35 mas, bpa=-17.57 degrees ! Estimated noise=569.424 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000153228 Jy ! Component: 100 - total flux cleaned = -0.00021964 Jy ! Component: 150 - total flux cleaned = -0.000294937 Jy ! Component: 200 - total flux cleaned = -0.000310292 Jy ! Total flux subtracted in 200 components = -0.000310292 Jy ! Clean residual min=-0.001514 max=0.001224 Jy/beam ! Clean residual mean=-0.000000 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.0605437 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.0605437 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078745Jy sigma=0.000700 ! Fit after self-cal, rms=0.078922Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127322 Jy ! Component: 100 - total flux cleaned = 0.000161099 Jy ! Component: 150 - total flux cleaned = 0.000203654 Jy ! Component: 200 - total flux cleaned = 0.000215444 Jy ! Total flux subtracted in 200 components = 0.000215444 Jy ! Clean residual min=-0.001500 max=0.001276 Jy/beam ! Clean residual mean=0.000000 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.0607591 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 61 components and 0.0607591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078914Jy sigma=0.000700 ! Fit after self-cal, rms=0.078918Jy sigma=0.000700 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078918Jy sigma=0.000700 ! Fit after self-cal, rms=0.079839Jy sigma=0.000700 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.6 mas, bmaj=13.39 mas, bpa=-17.53 degrees ! Estimated noise=569.235 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.01906e-05 Jy ! Component: 100 - total flux cleaned = -0.000170289 Jy ! Component: 150 - total flux cleaned = -0.000184581 Jy ! Component: 200 - total flux cleaned = -0.000209087 Jy ! Total flux subtracted in 200 components = -0.000209087 Jy ! Clean residual min=-0.001453 max=0.001328 Jy/beam ! Clean residual mean=-0.000000 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 0.06055 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 61 components and 0.06055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079832Jy sigma=0.000700 ! Fit after self-cal, rms=0.079916Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.18746e-05 Jy ! Component: 100 - total flux cleaned = 7.21269e-05 Jy ! Component: 150 - total flux cleaned = 6.26554e-05 Jy ! Component: 200 - total flux cleaned = 6.25659e-05 Jy ! Total flux subtracted in 200 components = 6.25659e-05 Jy ! Clean residual min=-0.001453 max=0.001283 Jy/beam ! Clean residual mean=0.000000 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.0606126 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 64 components and 0.0606126 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079912Jy sigma=0.000700 ! Fit after self-cal, rms=0.079917Jy sigma=0.000700 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079917Jy sigma=0.000700 ! Fit after self-cal, rms=0.080478Jy sigma=0.000700 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.618 mas, bmaj=13.69 mas, bpa=-14.97 degrees ! Estimated noise=668.673 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.64373e-05 Jy ! Component: 100 - total flux cleaned = 2.83013e-06 Jy ! Component: 150 - total flux cleaned = -1.67228e-05 Jy ! Component: 200 - total flux cleaned = -4.82174e-05 Jy ! Total flux subtracted in 200 components = -4.82174e-05 Jy ! Clean residual min=-0.001592 max=0.001361 Jy/beam ! Clean residual mean=-0.000000 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0605644 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 72 components and 0.0605644 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080474Jy sigma=0.000700 ! Fit after self-cal, rms=0.080528Jy sigma=0.000700 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.05997e-05 Jy ! Component: 100 - total flux cleaned = 2.2896e-05 Jy ! Component: 150 - total flux cleaned = 2.9359e-05 Jy ! Component: 200 - total flux cleaned = 3.51239e-05 Jy ! Total flux subtracted in 200 components = 3.51239e-05 Jy ! Clean residual min=-0.001602 max=0.001353 Jy/beam ! Clean residual mean=0.000000 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.0605995 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 75 components and 0.0605995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080527Jy sigma=0.000700 ! Fit after self-cal, rms=0.080530Jy sigma=0.000700 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.595 mas, bmaj=13.43 mas, bpa=-17.51 degrees ! Estimated noise=568.956 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.595 x 13.43 at -17.51 degrees (North through East) ! Clean map min=-0.0018008 max=0.054368 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.913 mas, bmaj=13.63 mas, bpa=-17.75 degrees ! Estimated noise=850.312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.042114 Jy ! Component: 100 - total flux cleaned = 0.0516303 Jy ! Component: 150 - total flux cleaned = 0.0555717 Jy ! Component: 200 - total flux cleaned = 0.0576249 Jy ! Total flux subtracted in 200 components = 0.0576249 Jy ! Clean residual min=-0.002036 max=0.002061 Jy/beam ! Clean residual mean=0.000003 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.0576249 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0576249 Jy ! Inverting map and beam ! Estimated beam: bmin=3.595 mas, bmaj=13.43 mas, bpa=-17.51 degrees ! Estimated noise=568.956 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00175937 Jy ! Component: 100 - total flux cleaned = 0.00212215 Jy ! Component: 150 - total flux cleaned = 0.00212782 Jy ! Component: 200 - total flux cleaned = 0.00216061 Jy ! Total flux subtracted in 200 components = 0.00216061 Jy ! Clean residual min=-0.001566 max=0.001423 Jy/beam ! Clean residual mean=0.000001 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.0597855 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 37 components and 0.0597855 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.618 mas, bmaj=13.69 mas, bpa=-14.97 degrees ! Estimated noise=668.673 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000340472 Jy ! Component: 100 - total flux cleaned = 0.000376858 Jy ! Component: 150 - total flux cleaned = 0.000422643 Jy ! Component: 200 - total flux cleaned = 0.000462408 Jy ! Total flux subtracted in 200 components = 0.000462408 Jy ! Clean residual min=-0.001643 max=0.001350 Jy/beam ! Clean residual mean=0.000001 rms=0.000394 Jy/beam ! Combined flux in latest and established models = 0.0602479 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.64575e-05 Jy ! Component: 100 - total flux cleaned = 8.83893e-05 Jy ! Component: 150 - total flux cleaned = 0.000117321 Jy ! Component: 200 - total flux cleaned = 0.000144248 Jy ! Total flux subtracted in 200 components = 0.000144248 Jy ! Clean residual min=-0.001639 max=0.001352 Jy/beam ! Clean residual mean=0.000001 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0603921 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 64 components and 0.0603921 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.595 mas, bmaj=13.43 mas, bpa=-17.51 degrees ! Estimated noise=568.956 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000133922 Jy ! Component: 100 - total flux cleaned = -0.000133359 Jy ! Component: 150 - total flux cleaned = -0.000115162 Jy ! Component: 200 - total flux cleaned = -9.94125e-05 Jy ! Total flux subtracted in 200 components = -9.94125e-05 Jy ! Clean residual min=-0.001453 max=0.001297 Jy/beam ! Clean residual mean=0.000000 rms=0.000336 Jy/beam ! Combined flux in latest and established models = 0.0602927 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.0602927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080539Jy sigma=0.000700 ! Fit after self-cal, rms=0.080543Jy sigma=0.000700 wmodel J0933+1009_S_2017_10_21_pus_map.mod ! Writing 76 model components to file: J0933+1009_S_2017_10_21_pus_map.mod wobs J0933+1009_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0933+1009_S_2017_10_21_pus_uvs.fits wwins J0933+1009_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0933+1009_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000391182 Jy ! Component: 100 - total flux cleaned = -0.000368637 Jy ! Component: 150 - total flux cleaned = -0.000306969 Jy ! Component: 200 - total flux cleaned = -0.000287259 Jy ! Component: 250 - total flux cleaned = -0.000287014 Jy ! Component: 300 - total flux cleaned = -0.00035979 Jy ! Component: 350 - total flux cleaned = -0.000359861 Jy ! Component: 400 - total flux cleaned = -0.000428663 Jy ! Component: 450 - total flux cleaned = -0.000495411 Jy ! Component: 500 - total flux cleaned = -0.000576966 Jy ! Component: 550 - total flux cleaned = -0.000656439 Jy ! Component: 600 - total flux cleaned = -0.000750142 Jy ! Component: 650 - total flux cleaned = -0.000856681 Jy ! Component: 700 - total flux cleaned = -0.000961039 Jy ! Component: 750 - total flux cleaned = -0.00104838 Jy ! Component: 800 - total flux cleaned = -0.00113429 Jy ! Component: 850 - total flux cleaned = -0.00126038 Jy ! Component: 900 - total flux cleaned = -0.00134287 Jy ! Component: 950 - total flux cleaned = -0.00143732 Jy ! Component: 1000 - total flux cleaned = -0.0014904 Jy ! Component: 1050 - total flux cleaned = -0.00160798 Jy ! Component: 1100 - total flux cleaned = -0.00167201 Jy ! Component: 1150 - total flux cleaned = -0.00169728 Jy ! Component: 1200 - total flux cleaned = -0.00174747 Jy ! Component: 1250 - total flux cleaned = -0.00185794 Jy ! Component: 1300 - total flux cleaned = -0.00189411 Jy ! Component: 1350 - total flux cleaned = -0.00196585 Jy ! Component: 1400 - total flux cleaned = -0.00200114 Jy ! Component: 1450 - total flux cleaned = -0.00204791 Jy ! Component: 1500 - total flux cleaned = -0.00210556 Jy ! Component: 1550 - total flux cleaned = -0.00215111 Jy ! Component: 1600 - total flux cleaned = -0.00219608 Jy ! Component: 1650 - total flux cleaned = -0.00224038 Jy ! Component: 1700 - total flux cleaned = -0.00227314 Jy ! Component: 1750 - total flux cleaned = -0.00229466 Jy ! Component: 1800 - total flux cleaned = -0.00233762 Jy ! Component: 1850 - total flux cleaned = -0.00236953 Jy ! Component: 1900 - total flux cleaned = -0.0024221 Jy ! Component: 1950 - total flux cleaned = -0.00240127 Jy ! Component: 2000 - total flux cleaned = -0.00247352 Jy ! Component: 2050 - total flux cleaned = -0.00247343 Jy ! Component: 2100 - total flux cleaned = -0.00254404 Jy ! Component: 2150 - total flux cleaned = -0.00255385 Jy ! Component: 2200 - total flux cleaned = -0.00256364 Jy ! Component: 2250 - total flux cleaned = -0.00256363 Jy ! Component: 2300 - total flux cleaned = -0.00260254 Jy ! Component: 2350 - total flux cleaned = -0.00262164 Jy ! Component: 2400 - total flux cleaned = -0.00264065 Jy ! Component: 2450 - total flux cleaned = -0.00264079 Jy ! Component: 2500 - total flux cleaned = -0.00266894 Jy ! Component: 2550 - total flux cleaned = -0.00269684 Jy ! Component: 2600 - total flux cleaned = -0.0026509 Jy ! Component: 2650 - total flux cleaned = -0.00269653 Jy ! Component: 2700 - total flux cleaned = -0.00271459 Jy ! Component: 2750 - total flux cleaned = -0.00271456 Jy ! Component: 2800 - total flux cleaned = -0.00272339 Jy ! Component: 2850 - total flux cleaned = -0.00270583 Jy ! Component: 2900 - total flux cleaned = -0.0027671 Jy ! Component: 2950 - total flux cleaned = -0.00274969 Jy ! Component: 3000 - total flux cleaned = -0.00274981 Jy ! Component: 3050 - total flux cleaned = -0.00273279 Jy ! Component: 3100 - total flux cleaned = -0.00274985 Jy ! Component: 3150 - total flux cleaned = -0.0027499 Jy ! Component: 3200 - total flux cleaned = -0.00278348 Jy ! Component: 3250 - total flux cleaned = -0.00282497 Jy ! Component: 3300 - total flux cleaned = -0.00280029 Jy ! Component: 3350 - total flux cleaned = -0.00280032 Jy ! Component: 3400 - total flux cleaned = -0.00283289 Jy ! Component: 3450 - total flux cleaned = -0.0028409 Jy ! Component: 3500 - total flux cleaned = -0.00284095 Jy ! Component: 3550 - total flux cleaned = -0.00281712 Jy ! Component: 3600 - total flux cleaned = -0.00284094 Jy ! Component: 3650 - total flux cleaned = -0.00284872 Jy ! Component: 3700 - total flux cleaned = -0.00284875 Jy ! Component: 3750 - total flux cleaned = -0.00286426 Jy ! Component: 3800 - total flux cleaned = -0.00284878 Jy ! Component: 3850 - total flux cleaned = -0.00284115 Jy ! Component: 3900 - total flux cleaned = -0.00282593 Jy ! Component: 3950 - total flux cleaned = -0.00281835 Jy ! Component: 4000 - total flux cleaned = -0.00278829 Jy ! Component: 4050 - total flux cleaned = -0.00282569 Jy ! Total flux subtracted in 4096 components = -0.00279582 Jy ! Clean residual min=-0.000473 max=0.000404 Jy/beam ! Clean residual mean=0.000000 rms=0.000139 Jy/beam ! Combined flux in latest and established models = 0.0574969 Jy keep ! Adding 284 model components to the UV plane model. ! The established model now contains 360 components and 0.0574969 Jy ![Exited script file: muppet] wmap "J0933+1009_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.595 x 13.43 at -17.51 degrees (North through East) ! Clean map min=-0.0017061 max=0.054296 Jy/beam ! Writing clean map to FITS file: J0933+1009_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0542957 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000135579 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.749115 0.749115 1.49823 2.99646 5.99292 11.9858 23.9717 47.9434 95.8867 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.054 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.595 x 13.43 at -17.51 degrees (North through East) ! Clean map min=-0.0017061 max=0.054296 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0933+1009_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:55:34 2019