! Started logfile: J0933+1009_S_2017_07_16_pus_uvs.log on Thu May 9 11:05:57 2019 obs J0933+1009_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0933+1009_S_2017_07_16_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.723611 visibilities/baseline/integration-bin. ! Found source: J0933+1009 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 18756 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0933+1009_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 324 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 935 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.001829Jy sigma=0.008375 ! Fit after self-cal, rms=0.951179Jy sigma=0.007977 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.71 mas, bmaj=7.538 mas, bpa=-7.583 degrees ! Estimated noise=1039.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0402954 Jy ! Component: 100 - total flux cleaned = 0.04911 Jy ! Total flux subtracted in 100 components = 0.04911 Jy ! Clean residual min=-0.002999 max=0.003746 Jy/beam ! Clean residual mean=-0.000002 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.04911 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.04911 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083055Jy sigma=0.000654 ! Fit after self-cal, rms=0.081692Jy sigma=0.000642 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.19 mas, bmaj=8.47 mas, bpa=-7.85 degrees ! Estimated noise=727.175 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0037503 Jy ! Component: 100 - total flux cleaned = 0.00396252 Jy ! Component: 150 - total flux cleaned = 0.00376689 Jy ! Component: 200 - total flux cleaned = 0.003632 Jy ! Total flux subtracted in 200 components = 0.003632 Jy ! Clean residual min=-0.002067 max=0.002310 Jy/beam ! Clean residual mean=0.000001 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.052742 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 14 components and 0.052742 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081478Jy sigma=0.000641 ! Fit after self-cal, rms=0.081429Jy sigma=0.000641 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 0.99 KP 1.07 ! LA 1.10 MK 1.07 NL 0.95 OV 1.06 ! PT 1.01 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.00* HN 1.08 KP 0.97 ! LA 0.92 MK 1.09 NL 1.02 OV 1.06 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 0.96 KP 0.94 ! LA 1.01 MK 1.03 NL 1.03 OV 1.04 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 4. ! A total of 141 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.76 KP 1.00* ! LA 0.88 MK 0.79 NL 1.00* OV 1.00* ! PT 0.93 SC 1.00* ! ! ! Fit before self-cal, rms=0.081429Jy sigma=0.000641 ! Fit after self-cal, rms=0.080785Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.208 mas, bmaj=8.459 mas, bpa=-7.294 degrees ! Estimated noise=731.027 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.41549e-05 Jy ! Component: 100 - total flux cleaned = -0.000116128 Jy ! Component: 150 - total flux cleaned = -0.000184083 Jy ! Component: 200 - total flux cleaned = -0.00022447 Jy ! Total flux subtracted in 200 components = -0.00022447 Jy ! Clean residual min=-0.002074 max=0.002023 Jy/beam ! Clean residual mean=0.000000 rms=0.000496 Jy/beam ! Combined flux in latest and established models = 0.0525175 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 0.0525175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080769Jy sigma=0.000641 ! Fit after self-cal, rms=0.080726Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080726Jy sigma=0.000640 ! Fit after self-cal, rms=0.080882Jy sigma=0.000639 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.225 mas, bmaj=8.463 mas, bpa=-7.408 degrees ! Estimated noise=734.525 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209262 Jy ! Component: 100 - total flux cleaned = -0.000228281 Jy ! Component: 150 - total flux cleaned = -0.000242692 Jy ! Component: 200 - total flux cleaned = -0.000229112 Jy ! Total flux subtracted in 200 components = -0.000229112 Jy ! Clean residual min=-0.001973 max=0.001851 Jy/beam ! Clean residual mean=0.000001 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0522884 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.0522884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080874Jy sigma=0.000639 ! Fit after self-cal, rms=0.080918Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000172537 Jy ! Component: 100 - total flux cleaned = -0.000187318 Jy ! Component: 150 - total flux cleaned = -0.00019966 Jy ! Component: 200 - total flux cleaned = -0.000220888 Jy ! Total flux subtracted in 200 components = -0.000220888 Jy ! Clean residual min=-0.002042 max=0.001843 Jy/beam ! Clean residual mean=0.000001 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.0520675 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 31 components and 0.0520675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080913Jy sigma=0.000638 ! Fit after self-cal, rms=0.080907Jy sigma=0.000638 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080907Jy sigma=0.000638 ! Fit after self-cal, rms=0.081799Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.234 mas, bmaj=8.477 mas, bpa=-7.37 degrees ! Estimated noise=735.785 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000212402 Jy ! Component: 100 - total flux cleaned = -0.000226494 Jy ! Component: 150 - total flux cleaned = -0.000250077 Jy ! Component: 200 - total flux cleaned = -0.000239266 Jy ! Total flux subtracted in 200 components = -0.000239266 Jy ! Clean residual min=-0.002106 max=0.001761 Jy/beam ! Clean residual mean=0.000001 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0518283 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.0518283 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081795Jy sigma=0.000638 ! Fit after self-cal, rms=0.081835Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.74575e-05 Jy ! Component: 100 - total flux cleaned = -5.50914e-05 Jy ! Component: 150 - total flux cleaned = -4.45719e-05 Jy ! Component: 200 - total flux cleaned = -4.44593e-05 Jy ! Total flux subtracted in 200 components = -4.44593e-05 Jy ! Clean residual min=-0.002097 max=0.001773 Jy/beam ! Clean residual mean=0.000001 rms=0.000442 Jy/beam ! Combined flux in latest and established models = 0.0517838 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.0517838 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081832Jy sigma=0.000638 ! Fit after self-cal, rms=0.081832Jy sigma=0.000638 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081832Jy sigma=0.000638 ! Fit after self-cal, rms=0.082293Jy sigma=0.000638 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.807 mas, bmaj=12.31 mas, bpa=-9.419 degrees ! Estimated noise=919.743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000172879 Jy ! Component: 100 - total flux cleaned = 0.000173613 Jy ! Component: 150 - total flux cleaned = 0.000173527 Jy ! Component: 200 - total flux cleaned = 0.000165615 Jy ! Total flux subtracted in 200 components = 0.000165615 Jy ! Clean residual min=-0.001960 max=0.001993 Jy/beam ! Clean residual mean=0.000001 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.0519494 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 41 components and 0.0519494 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082291Jy sigma=0.000638 ! Fit after self-cal, rms=0.082309Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.39384e-05 Jy ! Component: 100 - total flux cleaned = 5.22645e-05 Jy ! Component: 150 - total flux cleaned = 4.50141e-05 Jy ! Component: 200 - total flux cleaned = 4.49974e-05 Jy ! Total flux subtracted in 200 components = 4.49974e-05 Jy ! Clean residual min=-0.001945 max=0.001983 Jy/beam ! Clean residual mean=0.000001 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.0519944 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 41 components and 0.0519944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082309Jy sigma=0.000638 ! Fit after self-cal, rms=0.082311Jy sigma=0.000638 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=8.489 mas, bpa=-7.337 degrees ! Estimated noise=737.122 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.239 x 8.489 at -7.337 degrees (North through East) ! Clean map min=-0.0020373 max=0.054258 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.748 mas, bmaj=7.585 mas, bpa=-7.348 degrees ! Estimated noise=1052.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0420803 Jy ! Component: 100 - total flux cleaned = 0.0513164 Jy ! Component: 150 - total flux cleaned = 0.0523976 Jy ! Component: 200 - total flux cleaned = 0.0524029 Jy ! Total flux subtracted in 200 components = 0.0524029 Jy ! Clean residual min=-0.003333 max=0.002698 Jy/beam ! Clean residual mean=0.000001 rms=0.000736 Jy/beam ! Combined flux in latest and established models = 0.0524029 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0524029 Jy ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=8.489 mas, bpa=-7.337 degrees ! Estimated noise=737.122 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000105718 Jy ! Component: 100 - total flux cleaned = -0.000408199 Jy ! Component: 150 - total flux cleaned = -0.00052047 Jy ! Component: 200 - total flux cleaned = -0.000551414 Jy ! Total flux subtracted in 200 components = -0.000551414 Jy ! Clean residual min=-0.002065 max=0.001783 Jy/beam ! Clean residual mean=0.000001 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.0518514 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 18 components and 0.0518514 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.807 mas, bmaj=12.31 mas, bpa=-9.419 degrees ! Estimated noise=919.743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146029 Jy ! Component: 100 - total flux cleaned = 0.000124458 Jy ! Component: 150 - total flux cleaned = 0.0001397 Jy ! Component: 200 - total flux cleaned = 0.000139491 Jy ! Total flux subtracted in 200 components = 0.000139491 Jy ! Clean residual min=-0.001956 max=0.001984 Jy/beam ! Clean residual mean=0.000002 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.0519909 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.87032e-07 Jy ! Component: 100 - total flux cleaned = 6.18581e-07 Jy ! Component: 150 - total flux cleaned = 4.91118e-07 Jy ! Component: 200 - total flux cleaned = -7.73154e-06 Jy ! Total flux subtracted in 200 components = -7.73154e-06 Jy ! Clean residual min=-0.001950 max=0.001985 Jy/beam ! Clean residual mean=0.000001 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.0519832 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 38 components and 0.0519832 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.239 mas, bmaj=8.489 mas, bpa=-7.337 degrees ! Estimated noise=737.122 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.26216e-05 Jy ! Component: 100 - total flux cleaned = -0.000207655 Jy ! Component: 150 - total flux cleaned = -0.000276095 Jy ! Component: 200 - total flux cleaned = -0.000275928 Jy ! Total flux subtracted in 200 components = -0.000275928 Jy ! Clean residual min=-0.002097 max=0.001776 Jy/beam ! Clean residual mean=0.000001 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.0517073 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 45 components and 0.0517073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082314Jy sigma=0.000638 ! Fit after self-cal, rms=0.082313Jy sigma=0.000638 wmodel J0933+1009_S_2017_07_16_pus_map.mod ! Writing 45 model components to file: J0933+1009_S_2017_07_16_pus_map.mod wobs J0933+1009_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0933+1009_S_2017_07_16_pus_uvs.fits wwins J0933+1009_S_2017_07_16_pus_map.win ! wwins: Wrote 1 windows to J0933+1009_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000656889 Jy ! Component: 100 - total flux cleaned = -0.000748851 Jy ! Component: 150 - total flux cleaned = -0.000837544 Jy ! Component: 200 - total flux cleaned = -0.000893851 Jy ! Component: 250 - total flux cleaned = -0.000865583 Jy ! Component: 300 - total flux cleaned = -0.000812919 Jy ! Component: 350 - total flux cleaned = -0.000787061 Jy ! Component: 400 - total flux cleaned = -0.000663998 Jy ! Component: 450 - total flux cleaned = -0.000521919 Jy ! Component: 500 - total flux cleaned = -0.000359834 Jy ! Component: 550 - total flux cleaned = -0.00017904 Jy ! Component: 600 - total flux cleaned = 4.14689e-05 Jy ! Component: 650 - total flux cleaned = 0.000128152 Jy ! Component: 700 - total flux cleaned = 0.000298145 Jy ! Component: 750 - total flux cleaned = 0.000464621 Jy ! Component: 800 - total flux cleaned = 0.000606878 Jy ! Component: 850 - total flux cleaned = 0.000726851 Jy ! Component: 900 - total flux cleaned = 0.000904267 Jy ! Component: 950 - total flux cleaned = 0.000962191 Jy ! Component: 1000 - total flux cleaned = 0.00109588 Jy ! Component: 1050 - total flux cleaned = 0.00122742 Jy ! Component: 1100 - total flux cleaned = 0.00126446 Jy ! Component: 1150 - total flux cleaned = 0.00139241 Jy ! Component: 1200 - total flux cleaned = 0.00148221 Jy ! Component: 1250 - total flux cleaned = 0.0014639 Jy ! Component: 1300 - total flux cleaned = 0.00151654 Jy ! Component: 1350 - total flux cleaned = 0.0015342 Jy ! Component: 1400 - total flux cleaned = 0.00158535 Jy ! Component: 1450 - total flux cleaned = 0.00160203 Jy ! Component: 1500 - total flux cleaned = 0.00155147 Jy ! Component: 1550 - total flux cleaned = 0.00158483 Jy ! Component: 1600 - total flux cleaned = 0.00156857 Jy ! Component: 1650 - total flux cleaned = 0.00155247 Jy ! Component: 1700 - total flux cleaned = 0.00150477 Jy ! Component: 1750 - total flux cleaned = 0.00153637 Jy ! Component: 1800 - total flux cleaned = 0.00150526 Jy ! Component: 1850 - total flux cleaned = 0.00155135 Jy ! Component: 1900 - total flux cleaned = 0.00147487 Jy ! Component: 1950 - total flux cleaned = 0.00150511 Jy ! Component: 2000 - total flux cleaned = 0.00147523 Jy ! Component: 2050 - total flux cleaned = 0.0015345 Jy ! Component: 2100 - total flux cleaned = 0.00149048 Jy ! Component: 2150 - total flux cleaned = 0.00150494 Jy ! Component: 2200 - total flux cleaned = 0.00147608 Jy ! Component: 2250 - total flux cleaned = 0.00150448 Jy ! Component: 2300 - total flux cleaned = 0.00149024 Jy ! Component: 2350 - total flux cleaned = 0.00149026 Jy ! Component: 2400 - total flux cleaned = 0.00147646 Jy ! Component: 2450 - total flux cleaned = 0.00146264 Jy ! Component: 2500 - total flux cleaned = 0.00144904 Jy ! Component: 2550 - total flux cleaned = 0.00143553 Jy ! Component: 2600 - total flux cleaned = 0.00139536 Jy ! Component: 2650 - total flux cleaned = 0.00138205 Jy ! Component: 2700 - total flux cleaned = 0.00135581 Jy ! Component: 2750 - total flux cleaned = 0.00136888 Jy ! Component: 2800 - total flux cleaned = 0.00130416 Jy ! Component: 2850 - total flux cleaned = 0.00130409 Jy ! Component: 2900 - total flux cleaned = 0.001304 Jy ! Component: 2950 - total flux cleaned = 0.00131689 Jy ! Component: 3000 - total flux cleaned = 0.00131695 Jy ! Component: 3050 - total flux cleaned = 0.00132932 Jy ! Component: 3100 - total flux cleaned = 0.00130453 Jy ! Component: 3150 - total flux cleaned = 0.00130456 Jy ! Component: 3200 - total flux cleaned = 0.00131684 Jy ! Component: 3250 - total flux cleaned = 0.00124403 Jy ! Component: 3300 - total flux cleaned = 0.0012562 Jy ! Component: 3350 - total flux cleaned = 0.00126814 Jy ! Component: 3400 - total flux cleaned = 0.00119674 Jy ! Component: 3450 - total flux cleaned = 0.00123223 Jy ! Component: 3500 - total flux cleaned = 0.00120872 Jy ! Component: 3550 - total flux cleaned = 0.00119707 Jy ! Component: 3600 - total flux cleaned = 0.0012085 Jy ! Component: 3650 - total flux cleaned = 0.00115092 Jy ! Component: 3700 - total flux cleaned = 0.00112797 Jy ! Component: 3750 - total flux cleaned = 0.00111661 Jy ! Component: 3800 - total flux cleaned = 0.00106021 Jy ! Component: 3850 - total flux cleaned = 0.00109383 Jy ! Component: 3900 - total flux cleaned = 0.00100463 Jy ! Component: 3950 - total flux cleaned = 0.00101583 Jy ! Component: 4000 - total flux cleaned = 0.000971815 Jy ! Component: 4050 - total flux cleaned = 0.00100458 Jy ! Total flux subtracted in 4096 components = 0.000950167 Jy ! Clean residual min=-0.000578 max=0.000762 Jy/beam ! Clean residual mean=0.000001 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.0526574 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 318 components and 0.0526574 Jy ![Exited script file: muppet] wmap "J0933+1009_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.239 x 8.489 at -7.337 degrees (North through East) ! Clean map min=-0.0015704 max=0.054069 Jy/beam ! Writing clean map to FITS file: J0933+1009_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.054069 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000195949 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.08722 1.08722 2.17443 4.34886 8.69772 17.3954 34.7909 69.5818 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.054 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.239 x 8.489 at -7.337 degrees (North through East) ! Clean map min=-0.0015704 max=0.054069 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0933+1009_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:06:02 2019