! Started logfile: J0932-3405_S_2017_06_15_pus_uvs.log on Tue May 7 15:16:12 2019 obs J0932-3405_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0932-3405_S_2017_06_15_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.955093 visibilities/baseline/integration-bin. ! Found source: J0932-3405 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 16504 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0932-3405_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 23 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 554 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.921257Jy sigma=0.005928 ! Fit after self-cal, rms=0.882342Jy sigma=0.005690 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.391 mas, bmaj=7.038 mas, bpa=-6.872 degrees ! Estimated noise=1570.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0861226 Jy ! Component: 100 - total flux cleaned = 0.12725 Jy ! Total flux subtracted in 100 components = 0.12725 Jy ! Clean residual min=-0.008996 max=0.025193 Jy/beam ! Clean residual mean=-0.000166 rms=0.003865 Jy/beam ! Combined flux in latest and established models = 0.12725 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.12725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129479Jy sigma=0.000827 ! Fit after self-cal, rms=0.129152Jy sigma=0.000825 ! Inverting map ! Added new window around map position (-3, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0294732 Jy ! Component: 100 - total flux cleaned = 0.0498342 Jy ! Total flux subtracted in 100 components = 0.0498342 Jy ! Clean residual min=-0.007452 max=0.019171 Jy/beam ! Clean residual mean=-0.000133 rms=0.002733 Jy/beam ! Combined flux in latest and established models = 0.177085 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 61 components and 0.177085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118309Jy sigma=0.000744 ! Fit after self-cal, rms=0.118031Jy sigma=0.000742 ! Inverting map ! Added new window around map position (3, -12.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190805 Jy ! Component: 100 - total flux cleaned = 0.0320033 Jy ! Total flux subtracted in 100 components = 0.0320033 Jy ! Clean residual min=-0.006609 max=0.011278 Jy/beam ! Clean residual mean=-0.000106 rms=0.002050 Jy/beam ! Combined flux in latest and established models = 0.209088 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 89 components and 0.209088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113631Jy sigma=0.000709 ! Fit after self-cal, rms=0.113413Jy sigma=0.000708 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.974 mas, bmaj=8.032 mas, bpa=-5.026 degrees ! Estimated noise=977.147 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152639 Jy ! Component: 100 - total flux cleaned = 0.0251295 Jy ! Component: 150 - total flux cleaned = 0.0317701 Jy ! Component: 200 - total flux cleaned = 0.0362781 Jy ! Total flux subtracted in 200 components = 0.0362781 Jy ! Clean residual min=-0.006644 max=0.007737 Jy/beam ! Clean residual mean=-0.000135 rms=0.002023 Jy/beam ! Combined flux in latest and established models = 0.245366 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 128 components and 0.245366 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111251Jy sigma=0.000691 ! Fit after self-cal, rms=0.111123Jy sigma=0.000691 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.88 HN 1.27 KP 0.99 ! LA 0.98 MK 1.22 NL 0.98 OV 0.91 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.72 FD 0.91 HN 1.26 KP 0.97 ! LA 0.92 MK 1.01 NL 1.16 OV 0.96 ! PT 0.96 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.32 FD 0.95 HN 1.31 KP 0.94 ! LA 0.96 MK 1.12 NL 1.05 OV 0.87 ! PT 0.96 SC 0.97 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.09 KP 1.00* ! LA 0.94 MK 0.71 NL 1.00* OV 1.00* ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.111123Jy sigma=0.000691 ! Fit after self-cal, rms=0.122893Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.027 mas, bmaj=8.074 mas, bpa=-4.754 degrees ! Estimated noise=1021.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00252087 Jy ! Component: 100 - total flux cleaned = -0.00295218 Jy ! Component: 150 - total flux cleaned = -0.00323026 Jy ! Component: 200 - total flux cleaned = -0.00340146 Jy ! Total flux subtracted in 200 components = -0.00340146 Jy ! Clean residual min=-0.005142 max=0.004582 Jy/beam ! Clean residual mean=-0.000071 rms=0.001218 Jy/beam ! Combined flux in latest and established models = 0.241965 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 146 components and 0.241965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122768Jy sigma=0.000670 ! Fit after self-cal, rms=0.123105Jy sigma=0.000669 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123105Jy sigma=0.000669 ! Fit after self-cal, rms=0.126431Jy sigma=0.000669 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.041 mas, bmaj=8.072 mas, bpa=-4.62 degrees ! Estimated noise=1030.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00198041 Jy ! Component: 100 - total flux cleaned = -0.00231859 Jy ! Component: 150 - total flux cleaned = -0.00248467 Jy ! Component: 200 - total flux cleaned = -0.0025791 Jy ! Total flux subtracted in 200 components = -0.0025791 Jy ! Clean residual min=-0.004597 max=0.004006 Jy/beam ! Clean residual mean=-0.000068 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 0.239386 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 148 components and 0.239386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126358Jy sigma=0.000668 ! Fit after self-cal, rms=0.126439Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000455634 Jy ! Component: 100 - total flux cleaned = -0.000541697 Jy ! Component: 150 - total flux cleaned = -0.000580463 Jy ! Component: 200 - total flux cleaned = -0.000646729 Jy ! Total flux subtracted in 200 components = -0.000646729 Jy ! Clean residual min=-0.004524 max=0.003997 Jy/beam ! Clean residual mean=-0.000070 rms=0.001159 Jy/beam ! Combined flux in latest and established models = 0.238739 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 155 components and 0.238739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126412Jy sigma=0.000668 ! Fit after self-cal, rms=0.126408Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126408Jy sigma=0.000668 ! Fit after self-cal, rms=0.134747Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.051 mas, bmaj=8.122 mas, bpa=-4.532 degrees ! Estimated noise=1044.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00169775 Jy ! Component: 100 - total flux cleaned = -0.00197298 Jy ! Component: 150 - total flux cleaned = -0.00214839 Jy ! Component: 200 - total flux cleaned = -0.00225084 Jy ! Total flux subtracted in 200 components = -0.00225084 Jy ! Clean residual min=-0.003633 max=0.002950 Jy/beam ! Clean residual mean=-0.000030 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.236488 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 169 components and 0.236488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134663Jy sigma=0.000664 ! Fit after self-cal, rms=0.134853Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000408358 Jy ! Component: 100 - total flux cleaned = -0.000449504 Jy ! Component: 150 - total flux cleaned = -0.000528321 Jy ! Component: 200 - total flux cleaned = -0.000598263 Jy ! Total flux subtracted in 200 components = -0.000598263 Jy ! Clean residual min=-0.003560 max=0.002871 Jy/beam ! Clean residual mean=-0.000032 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.23589 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 177 components and 0.23589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134821Jy sigma=0.000663 ! Fit after self-cal, rms=0.134824Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134824Jy sigma=0.000663 ! Fit after self-cal, rms=0.139277Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.243 mas, bmaj=23.72 mas, bpa=1.6 degrees ! Estimated noise=1287.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00179714 Jy ! Component: 100 - total flux cleaned = -0.00205881 Jy ! Component: 150 - total flux cleaned = -0.00222372 Jy ! Component: 200 - total flux cleaned = -0.00236411 Jy ! Total flux subtracted in 200 components = -0.00236411 Jy ! Clean residual min=-0.004267 max=0.002730 Jy/beam ! Clean residual mean=-0.000054 rms=0.000987 Jy/beam ! Combined flux in latest and established models = 0.233526 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 192 components and 0.233526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139241Jy sigma=0.000663 ! Fit after self-cal, rms=0.139286Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000137886 Jy ! Component: 100 - total flux cleaned = -0.000294778 Jy ! Component: 150 - total flux cleaned = -0.000362476 Jy ! Component: 200 - total flux cleaned = -0.000393467 Jy ! Total flux subtracted in 200 components = -0.000393467 Jy ! Clean residual min=-0.004112 max=0.002763 Jy/beam ! Clean residual mean=-0.000057 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.233132 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 194 components and 0.233132 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139281Jy sigma=0.000663 ! Fit after self-cal, rms=0.139281Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=8.158 mas, bpa=-4.367 degrees ! Estimated noise=1051.12 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.062 x 8.158 at -4.367 degrees (North through East) ! Clean map min=-0.0039745 max=0.10122 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.447 mas, bmaj=7.018 mas, bpa=-6.171 degrees ! Estimated noise=1733.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0937471 Jy ! Component: 100 - total flux cleaned = 0.138814 Jy ! Component: 150 - total flux cleaned = 0.167067 Jy ! Component: 200 - total flux cleaned = 0.186208 Jy ! Total flux subtracted in 200 components = 0.186208 Jy ! Clean residual min=-0.005855 max=0.010567 Jy/beam ! Clean residual mean=-0.000068 rms=0.001902 Jy/beam ! Combined flux in latest and established models = 0.186209 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 72 model components to the UV plane model. ! The established model now contains 72 components and 0.186209 Jy ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=8.158 mas, bpa=-4.367 degrees ! Estimated noise=1051.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190409 Jy ! Component: 100 - total flux cleaned = 0.0298718 Jy ! Component: 150 - total flux cleaned = 0.0363581 Jy ! Component: 200 - total flux cleaned = 0.040347 Jy ! Total flux subtracted in 200 components = 0.040347 Jy ! Clean residual min=-0.003583 max=0.003548 Jy/beam ! Clean residual mean=-0.000035 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.226556 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 121 components and 0.226556 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.243 mas, bmaj=23.72 mas, bpa=1.6 degrees ! Estimated noise=1287.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00375605 Jy ! Component: 100 - total flux cleaned = 0.00512631 Jy ! Component: 150 - total flux cleaned = 0.00534688 Jy ! Component: 200 - total flux cleaned = 0.00539732 Jy ! Total flux subtracted in 200 components = 0.00539732 Jy ! Clean residual min=-0.004174 max=0.003008 Jy/beam ! Clean residual mean=-0.000063 rms=0.000996 Jy/beam ! Combined flux in latest and established models = 0.231953 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.21024e-05 Jy ! Component: 100 - total flux cleaned = 4.29219e-05 Jy ! Component: 150 - total flux cleaned = 6.34663e-05 Jy ! Component: 200 - total flux cleaned = 8.30998e-05 Jy ! Total flux subtracted in 200 components = 8.30998e-05 Jy ! Clean residual min=-0.004156 max=0.002957 Jy/beam ! Clean residual mean=-0.000063 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.232036 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 130 components and 0.232036 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.062 mas, bmaj=8.158 mas, bpa=-4.367 degrees ! Estimated noise=1051.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00029239 Jy ! Component: 100 - total flux cleaned = -0.000294545 Jy ! Component: 150 - total flux cleaned = -0.000256494 Jy ! Component: 200 - total flux cleaned = -0.00022378 Jy ! Total flux subtracted in 200 components = -0.00022378 Jy ! Clean residual min=-0.003454 max=0.002616 Jy/beam ! Clean residual mean=-0.000031 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.231812 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 142 components and 0.231812 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139298Jy sigma=0.000663 ! Fit after self-cal, rms=0.139267Jy sigma=0.000663 wmodel J0932-3405_S_2017_06_15_pus_map.mod ! Writing 142 model components to file: J0932-3405_S_2017_06_15_pus_map.mod wobs J0932-3405_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0932-3405_S_2017_06_15_pus_uvs.fits wwins J0932-3405_S_2017_06_15_pus_map.win ! wwins: Wrote 3 windows to J0932-3405_S_2017_06_15_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00152466 Jy ! Component: 100 - total flux cleaned = -0.00289926 Jy ! Component: 150 - total flux cleaned = -0.00371342 Jy ! Component: 200 - total flux cleaned = -0.00429397 Jy ! Component: 250 - total flux cleaned = -0.00480533 Jy ! Component: 300 - total flux cleaned = -0.00502959 Jy ! Component: 350 - total flux cleaned = -0.00542179 Jy ! Component: 400 - total flux cleaned = -0.00588822 Jy ! Component: 450 - total flux cleaned = -0.00605515 Jy ! Component: 500 - total flux cleaned = -0.00637976 Jy ! Component: 550 - total flux cleaned = -0.00669571 Jy ! Component: 600 - total flux cleaned = -0.00692802 Jy ! Component: 650 - total flux cleaned = -0.00719407 Jy ! Component: 700 - total flux cleaned = -0.00745372 Jy ! Component: 750 - total flux cleaned = -0.00770794 Jy ! Component: 800 - total flux cleaned = -0.00799232 Jy ! Component: 850 - total flux cleaned = -0.00816668 Jy ! Component: 900 - total flux cleaned = -0.0083723 Jy ! Component: 950 - total flux cleaned = -0.00843955 Jy ! Component: 1000 - total flux cleaned = -0.008605 Jy ! Component: 1050 - total flux cleaned = -0.00873452 Jy ! Component: 1100 - total flux cleaned = -0.00886206 Jy ! Component: 1150 - total flux cleaned = -0.00895629 Jy ! Component: 1200 - total flux cleaned = -0.00901855 Jy ! Component: 1250 - total flux cleaned = -0.00917162 Jy ! Component: 1300 - total flux cleaned = -0.00935203 Jy ! Component: 1350 - total flux cleaned = -0.00944127 Jy ! Component: 1400 - total flux cleaned = -0.00958733 Jy ! Component: 1450 - total flux cleaned = -0.00970281 Jy ! Component: 1500 - total flux cleaned = -0.0099018 Jy ! Component: 1550 - total flux cleaned = -0.00995819 Jy ! Component: 1600 - total flux cleaned = -0.0101246 Jy ! Component: 1650 - total flux cleaned = -0.0102064 Jy ! Component: 1700 - total flux cleaned = -0.0103408 Jy ! Component: 1750 - total flux cleaned = -0.0103411 Jy ! Component: 1800 - total flux cleaned = -0.010394 Jy ! Component: 1850 - total flux cleaned = -0.010472 Jy ! Component: 1900 - total flux cleaned = -0.010549 Jy ! Component: 1950 - total flux cleaned = -0.0104983 Jy ! Component: 2000 - total flux cleaned = -0.0104481 Jy ! Component: 2050 - total flux cleaned = -0.0104234 Jy ! Component: 2100 - total flux cleaned = -0.0104235 Jy ! Component: 2150 - total flux cleaned = -0.0103748 Jy ! Component: 2200 - total flux cleaned = -0.010303 Jy ! Component: 2250 - total flux cleaned = -0.0103031 Jy ! Component: 2300 - total flux cleaned = -0.010209 Jy ! Component: 2350 - total flux cleaned = -0.0102552 Jy ! Component: 2400 - total flux cleaned = -0.0101857 Jy ! Component: 2450 - total flux cleaned = -0.0101177 Jy ! Component: 2500 - total flux cleaned = -0.0100953 Jy ! Component: 2550 - total flux cleaned = -0.0100729 Jy ! Component: 2600 - total flux cleaned = -0.0100504 Jy ! Component: 2650 - total flux cleaned = -0.0100281 Jy ! Component: 2700 - total flux cleaned = -0.0100061 Jy ! Component: 2750 - total flux cleaned = -0.00989831 Jy ! Component: 2800 - total flux cleaned = -0.00987716 Jy ! Component: 2850 - total flux cleaned = -0.00989831 Jy ! Component: 2900 - total flux cleaned = -0.00977243 Jy ! Component: 2950 - total flux cleaned = -0.00985574 Jy ! Component: 3000 - total flux cleaned = -0.00975211 Jy ! Component: 3050 - total flux cleaned = -0.00973147 Jy ! Component: 3100 - total flux cleaned = -0.00965021 Jy ! Component: 3150 - total flux cleaned = -0.00956999 Jy ! Component: 3200 - total flux cleaned = -0.00951022 Jy ! Component: 3250 - total flux cleaned = -0.00951074 Jy ! Component: 3300 - total flux cleaned = -0.0094522 Jy ! Component: 3350 - total flux cleaned = -0.00945227 Jy ! Component: 3400 - total flux cleaned = -0.00935609 Jy ! Component: 3450 - total flux cleaned = -0.00933678 Jy ! Component: 3500 - total flux cleaned = -0.00924182 Jy ! Component: 3550 - total flux cleaned = -0.00926057 Jy ! Component: 3600 - total flux cleaned = -0.00914852 Jy ! Component: 3650 - total flux cleaned = -0.00903778 Jy ! Component: 3700 - total flux cleaned = -0.0090195 Jy ! Component: 3750 - total flux cleaned = -0.00898322 Jy ! Component: 3800 - total flux cleaned = -0.00891104 Jy ! Component: 3850 - total flux cleaned = -0.00885739 Jy ! Component: 3900 - total flux cleaned = -0.00878629 Jy ! Component: 3950 - total flux cleaned = -0.00871584 Jy ! Component: 4000 - total flux cleaned = -0.00864581 Jy ! Component: 4050 - total flux cleaned = -0.00862848 Jy ! Total flux subtracted in 4096 components = -0.00857674 Jy ! Clean residual min=-0.001106 max=0.000990 Jy/beam ! Clean residual mean=-0.000003 rms=0.000319 Jy/beam ! Combined flux in latest and established models = 0.223235 Jy keep ! Adding 277 model components to the UV plane model. ! The established model now contains 419 components and 0.223235 Jy ![Exited script file: muppet] wmap "J0932-3405_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.062 x 8.158 at -4.367 degrees (North through East) ! Clean map min=-0.0023026 max=0.10958 Jy/beam ! Writing clean map to FITS file: J0932-3405_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.109578 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000320653 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.877877 0.877877 1.75575 3.51151 7.02301 14.046 28.0921 56.1841 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.109 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.062 x 8.158 at -4.367 degrees (North through East) ! Clean map min=-0.0023026 max=0.10958 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0932-3405_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:16:18 2019