! Started logfile: J0932+6507_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:10:16 2019 obs J0932+6507_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0932+6507_S_2017_01_16_pus_uva.fits ! AN table 1: 141 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.645548 visibilities/baseline/integration-bin. ! Found source: J0932+6507 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 16384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0932+6507_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 306 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 306 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 306 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 595 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.846025Jy sigma=0.007040 ! Fit after self-cal, rms=0.828816Jy sigma=0.006942 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.228 mas, bmaj=5.22 mas, bpa=42.63 degrees ! Estimated noise=1131.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.142642 Jy ! Component: 100 - total flux cleaned = 0.177993 Jy ! Total flux subtracted in 100 components = 0.177993 Jy ! Clean residual min=-0.020337 max=0.076823 Jy/beam ! Clean residual mean=0.000137 rms=0.006464 Jy/beam ! Combined flux in latest and established models = 0.177993 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.177993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.158571Jy sigma=0.001217 ! Fit after self-cal, rms=0.158539Jy sigma=0.001217 ! Inverting map ! Added new window around map position (19, -35). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.064043 Jy ! Component: 100 - total flux cleaned = 0.0896559 Jy ! Total flux subtracted in 100 components = 0.0896559 Jy ! Clean residual min=-0.013210 max=0.039592 Jy/beam ! Clean residual mean=0.000132 rms=0.004165 Jy/beam ! Combined flux in latest and established models = 0.267649 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 32 components and 0.267649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130977Jy sigma=0.000956 ! Fit after self-cal, rms=0.126211Jy sigma=0.000910 ! Inverting map ! Added new window around map position (30, -32). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0373212 Jy ! Component: 100 - total flux cleaned = 0.0573696 Jy ! Total flux subtracted in 100 components = 0.0573696 Jy ! Clean residual min=-0.007984 max=0.016582 Jy/beam ! Clean residual mean=0.000037 rms=0.002462 Jy/beam ! Combined flux in latest and established models = 0.325019 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 50 components and 0.325019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114290Jy sigma=0.000787 ! Fit after self-cal, rms=0.113339Jy sigma=0.000777 ! Inverting map ! Added new window around map position (5.5, -15.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174919 Jy ! Component: 100 - total flux cleaned = 0.0299284 Jy ! Total flux subtracted in 100 components = 0.0299284 Jy ! Clean residual min=-0.006776 max=0.007926 Jy/beam ! Clean residual mean=0.000031 rms=0.001870 Jy/beam ! Combined flux in latest and established models = 0.354947 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 67 components and 0.354947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110044Jy sigma=0.000741 ! Fit after self-cal, rms=0.109943Jy sigma=0.000740 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.851 mas, bmaj=5.815 mas, bpa=38.22 degrees ! Estimated noise=715.879 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0133411 Jy ! Component: 100 - total flux cleaned = 0.0234159 Jy ! Component: 150 - total flux cleaned = 0.0316284 Jy ! Component: 200 - total flux cleaned = 0.0385131 Jy ! Total flux subtracted in 200 components = 0.0385131 Jy ! Clean residual min=-0.004715 max=0.007348 Jy/beam ! Clean residual mean=0.000045 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.39346 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 111 components and 0.39346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107632Jy sigma=0.000714 ! Fit after self-cal, rms=0.107570Jy sigma=0.000714 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.94 HN 0.95 KP 0.98 ! LA 0.98 MK 1.00* NL 0.92 OV 1.18 ! PT 0.92 SC 0.94 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.97 HN 0.99 KP 0.87 ! LA 0.96 MK 1.00* NL 1.01 OV 1.02 ! PT 0.93 SC 1.08 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.99 HN 0.98 KP 0.93 ! LA 0.98 MK 1.00* NL 1.01 OV 0.94 ! PT 0.94 SC 1.01 ! ! ! Correcting IF 4. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.02 HN 0.97 KP 1.00* ! LA 1.14 MK 1.00* NL 1.00* OV 0.96 ! PT 0.97 SC 1.44 ! ! ! Fit before self-cal, rms=0.107570Jy sigma=0.000714 ! Fit after self-cal, rms=0.125035Jy sigma=0.000693 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.925 mas, bmaj=5.847 mas, bpa=38.46 degrees ! Estimated noise=705.976 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00451974 Jy ! Component: 100 - total flux cleaned = 0.00758313 Jy ! Component: 150 - total flux cleaned = 0.0100264 Jy ! Component: 200 - total flux cleaned = 0.0113972 Jy ! Total flux subtracted in 200 components = 0.0113972 Jy ! Clean residual min=-0.003563 max=0.005025 Jy/beam ! Clean residual mean=0.000043 rms=0.001070 Jy/beam ! Combined flux in latest and established models = 0.404858 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 131 components and 0.404858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124853Jy sigma=0.000690 ! Fit after self-cal, rms=0.124888Jy sigma=0.000690 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124888Jy sigma=0.000690 ! Fit after self-cal, rms=0.098370Jy sigma=0.000676 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.908 mas, bmaj=5.811 mas, bpa=38.4 degrees ! Estimated noise=710.913 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190324 Jy ! Component: 100 - total flux cleaned = 0.00309424 Jy ! Component: 150 - total flux cleaned = 0.00378072 Jy ! Component: 200 - total flux cleaned = 0.00432915 Jy ! Total flux subtracted in 200 components = 0.00432915 Jy ! Clean residual min=-0.002527 max=0.004026 Jy/beam ! Clean residual mean=-0.000007 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.409187 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 155 components and 0.409187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098287Jy sigma=0.000674 ! Fit after self-cal, rms=0.098330Jy sigma=0.000674 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (28.5, -44). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00371538 Jy ! Component: 100 - total flux cleaned = 0.00443329 Jy ! Component: 150 - total flux cleaned = 0.00484691 Jy ! Component: 200 - total flux cleaned = 0.00489756 Jy ! Total flux subtracted in 200 components = 0.00489756 Jy ! Clean residual min=-0.002358 max=0.002967 Jy/beam ! Clean residual mean=-0.000006 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.414084 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 171 components and 0.414084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098189Jy sigma=0.000673 ! Fit after self-cal, rms=0.098185Jy sigma=0.000673 ! Inverting map ! Added new window around map position (8.5, -24.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204743 Jy ! Component: 100 - total flux cleaned = 0.00241086 Jy ! Component: 150 - total flux cleaned = 0.00261674 Jy ! Component: 200 - total flux cleaned = 0.00270586 Jy ! Total flux subtracted in 200 components = 0.00270586 Jy ! Clean residual min=-0.002265 max=0.002295 Jy/beam ! Clean residual mean=-0.000004 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.41679 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 193 components and 0.41679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098102Jy sigma=0.000672 ! Fit after self-cal, rms=0.098097Jy sigma=0.000672 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098097Jy sigma=0.000672 ! Fit after self-cal, rms=0.098525Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.902 mas, bmaj=5.794 mas, bpa=38.15 degrees ! Estimated noise=712.159 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132734 Jy ! Component: 100 - total flux cleaned = 0.00209357 Jy ! Component: 150 - total flux cleaned = 0.00267938 Jy ! Component: 200 - total flux cleaned = 0.00296529 Jy ! Total flux subtracted in 200 components = 0.00296529 Jy ! Clean residual min=-0.001968 max=0.002073 Jy/beam ! Clean residual mean=-0.000009 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.419756 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 204 components and 0.419756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098484Jy sigma=0.000671 ! Fit after self-cal, rms=0.098489Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000332071 Jy ! Component: 100 - total flux cleaned = 0.000514268 Jy ! Component: 150 - total flux cleaned = 0.00064974 Jy ! Component: 200 - total flux cleaned = 0.000839796 Jy ! Total flux subtracted in 200 components = 0.000839796 Jy ! Clean residual min=-0.001941 max=0.002027 Jy/beam ! Clean residual mean=-0.000009 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.420595 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 217 components and 0.420595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098469Jy sigma=0.000671 ! Fit after self-cal, rms=0.098468Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098468Jy sigma=0.000671 ! Fit after self-cal, rms=0.098652Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.527 mas, bmaj=9.369 mas, bpa=72.24 degrees ! Estimated noise=843.867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013677 Jy ! Component: 100 - total flux cleaned = 0.00186669 Jy ! Component: 150 - total flux cleaned = 0.00220586 Jy ! Component: 200 - total flux cleaned = 0.00235171 Jy ! Total flux subtracted in 200 components = 0.00235171 Jy ! Clean residual min=-0.002194 max=0.002566 Jy/beam ! Clean residual mean=-0.000021 rms=0.000579 Jy/beam ! Combined flux in latest and established models = 0.422947 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 239 components and 0.422947 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098639Jy sigma=0.000670 ! Fit after self-cal, rms=0.098637Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (47, -58). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00244518 Jy ! Component: 100 - total flux cleaned = 0.00370904 Jy ! Component: 150 - total flux cleaned = 0.00434704 Jy ! Component: 200 - total flux cleaned = 0.00465371 Jy ! Total flux subtracted in 200 components = 0.00465371 Jy ! Clean residual min=-0.001882 max=0.001961 Jy/beam ! Clean residual mean=-0.000025 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.427601 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 280 components and 0.427601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098592Jy sigma=0.000670 ! Fit after self-cal, rms=0.098590Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.896 mas, bmaj=5.786 mas, bpa=37.97 degrees ! Estimated noise=712.679 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.896 x 5.786 at 37.97 degrees (North through East) ! Clean map min=-0.0016913 max=0.17312 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.26 mas, bmaj=5.198 mas, bpa=41.87 degrees ! Estimated noise=1122.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.150794 Jy ! Component: 100 - total flux cleaned = 0.21528 Jy ! Component: 150 - total flux cleaned = 0.256011 Jy ! Component: 200 - total flux cleaned = 0.284268 Jy ! Total flux subtracted in 200 components = 0.284268 Jy ! Clean residual min=-0.009157 max=0.016396 Jy/beam ! Clean residual mean=-0.000009 rms=0.002756 Jy/beam ! Combined flux in latest and established models = 0.284268 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.284268 Jy ! Inverting map and beam ! Estimated beam: bmin=4.896 mas, bmaj=5.786 mas, bpa=37.97 degrees ! Estimated noise=712.679 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0276655 Jy ! Component: 100 - total flux cleaned = 0.0478821 Jy ! Component: 150 - total flux cleaned = 0.0634334 Jy ! Component: 200 - total flux cleaned = 0.0756074 Jy ! Total flux subtracted in 200 components = 0.0756074 Jy ! Clean residual min=-0.004375 max=0.007167 Jy/beam ! Clean residual mean=0.000002 rms=0.001501 Jy/beam ! Combined flux in latest and established models = 0.359876 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 80 components and 0.359875 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00969497 Jy ! Component: 100 - total flux cleaned = 0.0176145 Jy ! Component: 150 - total flux cleaned = 0.0242333 Jy ! Component: 200 - total flux cleaned = 0.0298001 Jy ! Total flux subtracted in 200 components = 0.0298001 Jy ! Clean residual min=-0.002963 max=0.003897 Jy/beam ! Clean residual mean=-0.000004 rms=0.000891 Jy/beam ! Combined flux in latest and established models = 0.389676 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 119 components and 0.389676 Jy ! Inverting map ! Added new window around map position (1.5, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00480955 Jy ! Component: 100 - total flux cleaned = 0.00890804 Jy ! Component: 150 - total flux cleaned = 0.0124689 Jy ! Component: 200 - total flux cleaned = 0.0155819 Jy ! Total flux subtracted in 200 components = 0.0155819 Jy ! Clean residual min=-0.002357 max=0.002384 Jy/beam ! Clean residual mean=-0.000006 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.405258 Jy ! Adding 67 model components to the UV plane model. ! The established model now contains 173 components and 0.405258 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.527 mas, bmaj=9.369 mas, bpa=72.24 degrees ! Estimated noise=843.867 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00416337 Jy ! Component: 100 - total flux cleaned = 0.00734127 Jy ! Component: 150 - total flux cleaned = 0.00997042 Jy ! Component: 200 - total flux cleaned = 0.0121848 Jy ! Total flux subtracted in 200 components = 0.0121848 Jy ! Clean residual min=-0.002273 max=0.002127 Jy/beam ! Clean residual mean=-0.000018 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.417442 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018804 Jy ! Component: 100 - total flux cleaned = 0.00348731 Jy ! Component: 150 - total flux cleaned = 0.00487172 Jy ! Component: 200 - total flux cleaned = 0.00608417 Jy ! Total flux subtracted in 200 components = 0.00608417 Jy ! Clean residual min=-0.001875 max=0.001936 Jy/beam ! Clean residual mean=-0.000020 rms=0.000515 Jy/beam ! Combined flux in latest and established models = 0.423527 Jy ! Adding 160 model components to the UV plane model. ! The established model now contains 321 components and 0.423527 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.896 mas, bmaj=5.786 mas, bpa=37.97 degrees ! Estimated noise=712.679 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000955165 Jy ! Component: 100 - total flux cleaned = 0.00162356 Jy ! Component: 150 - total flux cleaned = 0.00204913 Jy ! Component: 200 - total flux cleaned = 0.0024871 Jy ! Total flux subtracted in 200 components = 0.0024871 Jy ! Clean residual min=-0.001788 max=0.001873 Jy/beam ! Clean residual mean=-0.000010 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.426014 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 352 components and 0.426014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098601Jy sigma=0.000670 ! Fit after self-cal, rms=0.098600Jy sigma=0.000670 wmodel J0932+6507_S_2017_01_16_pus_map.mod ! Writing 352 model components to file: J0932+6507_S_2017_01_16_pus_map.mod wobs J0932+6507_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0932+6507_S_2017_01_16_pus_uvs.fits wwins J0932+6507_S_2017_01_16_pus_map.win ! wwins: Wrote 8 windows to J0932+6507_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109162 Jy ! Component: 100 - total flux cleaned = 0.000108075 Jy ! Component: 150 - total flux cleaned = 0.00013874 Jy ! Component: 200 - total flux cleaned = 0.00016801 Jy ! Component: 250 - total flux cleaned = 0.000112862 Jy ! Component: 300 - total flux cleaned = -2.09332e-05 Jy ! Component: 350 - total flux cleaned = -7.29113e-05 Jy ! Component: 400 - total flux cleaned = -0.000174584 Jy ! Component: 450 - total flux cleaned = -0.000223469 Jy ! Component: 500 - total flux cleaned = -0.000296827 Jy ! Component: 550 - total flux cleaned = -0.000392436 Jy ! Component: 600 - total flux cleaned = -0.000485588 Jy ! Component: 650 - total flux cleaned = -0.000530734 Jy ! Component: 700 - total flux cleaned = -0.000621223 Jy ! Component: 750 - total flux cleaned = -0.000710264 Jy ! Component: 800 - total flux cleaned = -0.000819576 Jy ! Component: 850 - total flux cleaned = -0.000970234 Jy ! Component: 900 - total flux cleaned = -0.00101258 Jy ! Component: 950 - total flux cleaned = -0.00113796 Jy ! Component: 1000 - total flux cleaned = -0.00128247 Jy ! Component: 1050 - total flux cleaned = -0.00140455 Jy ! Component: 1100 - total flux cleaned = -0.00152474 Jy ! Component: 1150 - total flux cleaned = -0.00162366 Jy ! Component: 1200 - total flux cleaned = -0.00168256 Jy ! Component: 1250 - total flux cleaned = -0.00179865 Jy ! Component: 1300 - total flux cleaned = -0.00191354 Jy ! Component: 1350 - total flux cleaned = -0.00202671 Jy ! Component: 1400 - total flux cleaned = -0.00208285 Jy ! Component: 1450 - total flux cleaned = -0.00215669 Jy ! Component: 1500 - total flux cleaned = -0.00230234 Jy ! Component: 1550 - total flux cleaned = -0.00237441 Jy ! Component: 1600 - total flux cleaned = -0.00249929 Jy ! Component: 1650 - total flux cleaned = -0.00253468 Jy ! Component: 1700 - total flux cleaned = -0.00263958 Jy ! Component: 1750 - total flux cleaned = -0.00274338 Jy ! Component: 1800 - total flux cleaned = -0.002795 Jy ! Component: 1850 - total flux cleaned = -0.00281201 Jy ! Component: 1900 - total flux cleaned = -0.00287901 Jy ! Component: 1950 - total flux cleaned = -0.00294533 Jy ! Component: 2000 - total flux cleaned = -0.00296157 Jy ! Component: 2050 - total flux cleaned = -0.0029455 Jy ! Component: 2100 - total flux cleaned = -0.0030264 Jy ! Component: 2150 - total flux cleaned = -0.00305855 Jy ! Component: 2200 - total flux cleaned = -0.00315365 Jy ! Component: 2250 - total flux cleaned = -0.00315362 Jy ! Component: 2300 - total flux cleaned = -0.00321591 Jy ! Component: 2350 - total flux cleaned = -0.00320055 Jy ! Component: 2400 - total flux cleaned = -0.00324673 Jy ! Component: 2450 - total flux cleaned = -0.00324673 Jy ! Component: 2500 - total flux cleaned = -0.00329186 Jy ! Component: 2550 - total flux cleaned = -0.00332184 Jy ! Component: 2600 - total flux cleaned = -0.0033665 Jy ! Component: 2650 - total flux cleaned = -0.00333681 Jy ! Component: 2700 - total flux cleaned = -0.00342471 Jy ! Component: 2750 - total flux cleaned = -0.00345378 Jy ! Component: 2800 - total flux cleaned = -0.00346832 Jy ! Component: 2850 - total flux cleaned = -0.00355447 Jy ! Component: 2900 - total flux cleaned = -0.00356886 Jy ! Component: 2950 - total flux cleaned = -0.0036396 Jy ! Component: 3000 - total flux cleaned = -0.00366763 Jy ! Component: 3050 - total flux cleaned = -0.00373755 Jy ! Component: 3100 - total flux cleaned = -0.00373759 Jy ! Component: 3150 - total flux cleaned = -0.00380651 Jy ! Component: 3200 - total flux cleaned = -0.0038749 Jy ! Component: 3250 - total flux cleaned = -0.00390203 Jy ! Component: 3300 - total flux cleaned = -0.00394249 Jy ! Component: 3350 - total flux cleaned = -0.00394263 Jy ! Component: 3400 - total flux cleaned = -0.00407624 Jy ! Component: 3450 - total flux cleaned = -0.00410274 Jy ! Component: 3500 - total flux cleaned = -0.00408956 Jy ! Component: 3550 - total flux cleaned = -0.00416828 Jy ! Component: 3600 - total flux cleaned = -0.00411602 Jy ! Component: 3650 - total flux cleaned = -0.00416794 Jy ! Component: 3700 - total flux cleaned = -0.00415495 Jy ! Component: 3750 - total flux cleaned = -0.00415497 Jy ! Component: 3800 - total flux cleaned = -0.00415501 Jy ! Component: 3850 - total flux cleaned = -0.0041803 Jy ! Component: 3900 - total flux cleaned = -0.00418021 Jy ! Component: 3950 - total flux cleaned = -0.00416767 Jy ! Component: 4000 - total flux cleaned = -0.00415529 Jy ! Component: 4050 - total flux cleaned = -0.00415531 Jy ! Total flux subtracted in 4096 components = -0.00421708 Jy ! Clean residual min=-0.000764 max=0.000816 Jy/beam ! Clean residual mean=-0.000003 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.421797 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 633 components and 0.421797 Jy ![Exited script file: muppet] wmap "J0932+6507_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.896 x 5.786 at 37.97 degrees (North through East) ! Clean map min=-0.0013275 max=0.17277 Jy/beam ! Writing clean map to FITS file: J0932+6507_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.172765 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000226182 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.392757 0.392757 0.785513 1.57103 3.14205 6.28411 12.5682 25.1364 50.2728 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.172 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.896 x 5.786 at 37.97 degrees (North through East) ! Clean map min=-0.0013275 max=0.17277 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0932+6507_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:10:23 2019