! Started logfile: J0930+0058_S_2017_06_10_pus_uvs.log on Mon May 6 14:50:32 2019 obs J0930+0058_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0930+0058_S_2017_06_10_pus_uva.fits ! AN table 1: 148 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.703754 visibilities/baseline/integration-bin. ! Found source: J0930+0058 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 18748 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0930+0058_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 322 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 453 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 403 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 979 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.955757Jy sigma=0.008682 ! Fit after self-cal, rms=0.939602Jy sigma=0.008559 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=6.837 mas, bpa=-1.238 degrees ! Estimated noise=972.116 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0478833 Jy ! Component: 100 - total flux cleaned = 0.0583989 Jy ! Total flux subtracted in 100 components = 0.0583989 Jy ! Clean residual min=-0.003581 max=0.003576 Jy/beam ! Clean residual mean=-0.000006 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.0583989 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0583989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079665Jy sigma=0.000688 ! Fit after self-cal, rms=0.079581Jy sigma=0.000687 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=8.109 mas, bpa=-2.256 degrees ! Estimated noise=680.276 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00439215 Jy ! Component: 100 - total flux cleaned = 0.00592919 Jy ! Component: 150 - total flux cleaned = 0.00602702 Jy ! Component: 200 - total flux cleaned = 0.00610452 Jy ! Total flux subtracted in 200 components = 0.00610452 Jy ! Clean residual min=-0.002248 max=0.002296 Jy/beam ! Clean residual mean=-0.000005 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.0645034 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 22 components and 0.0645034 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079312Jy sigma=0.000685 ! Fit after self-cal, rms=0.079306Jy sigma=0.000685 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 HN 0.97 KP 1.20 ! LA 0.98 MK 0.97 NL 0.94 OV 1.10 ! PT 1.04 SC 1.02 ! ! ! Correcting IF 2. ! A total of 75 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.01 KP 1.00 ! LA 0.94 MK 0.98 NL 0.98 OV 1.11 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 3. ! A total of 75 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.03 HN 0.97 KP 0.95 ! LA 0.94 MK 1.28 NL 1.01 OV 0.99 ! PT 0.98 SC 0.99 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 0.83 KP 1.00* ! LA 0.83 MK 0.97 NL 1.00* OV 1.00* ! PT 0.89 SC 1.00* ! ! ! Fit before self-cal, rms=0.079306Jy sigma=0.000685 ! Fit after self-cal, rms=0.078772Jy sigma=0.000684 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.395 mas, bmaj=8.238 mas, bpa=-2.803 degrees ! Estimated noise=683.887 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000210997 Jy ! Component: 100 - total flux cleaned = -0.000154322 Jy ! Component: 150 - total flux cleaned = -8.00218e-05 Jy ! Component: 200 - total flux cleaned = -1.63455e-05 Jy ! Total flux subtracted in 200 components = -1.63455e-05 Jy ! Clean residual min=-0.001795 max=0.001906 Jy/beam ! Clean residual mean=-0.000010 rms=0.000463 Jy/beam ! Combined flux in latest and established models = 0.0644871 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 28 components and 0.0644871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078763Jy sigma=0.000684 ! Fit after self-cal, rms=0.078772Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078772Jy sigma=0.000684 ! Fit after self-cal, rms=0.080562Jy sigma=0.000681 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.4 mas, bmaj=8.257 mas, bpa=-2.738 degrees ! Estimated noise=684.784 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000136634 Jy ! Component: 100 - total flux cleaned = -0.000124069 Jy ! Component: 150 - total flux cleaned = -0.000123709 Jy ! Component: 200 - total flux cleaned = -0.0001153 Jy ! Total flux subtracted in 200 components = -0.0001153 Jy ! Clean residual min=-0.001635 max=0.001562 Jy/beam ! Clean residual mean=-0.000007 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0643718 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.0643718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080558Jy sigma=0.000681 ! Fit after self-cal, rms=0.080662Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.31382e-05 Jy ! Component: 100 - total flux cleaned = 8.18607e-05 Jy ! Component: 150 - total flux cleaned = 8.16213e-05 Jy ! Component: 200 - total flux cleaned = 7.45623e-05 Jy ! Total flux subtracted in 200 components = 7.45623e-05 Jy ! Clean residual min=-0.001561 max=0.001559 Jy/beam ! Clean residual mean=-0.000007 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.0644463 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.0644463 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080659Jy sigma=0.000681 ! Fit after self-cal, rms=0.080657Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080657Jy sigma=0.000681 ! Fit after self-cal, rms=0.082024Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.406 mas, bmaj=8.277 mas, bpa=-2.769 degrees ! Estimated noise=686.167 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.31093e-05 Jy ! Component: 100 - total flux cleaned = -9.00674e-05 Jy ! Component: 150 - total flux cleaned = -8.98536e-05 Jy ! Component: 200 - total flux cleaned = -8.27024e-05 Jy ! Total flux subtracted in 200 components = -8.27024e-05 Jy ! Clean residual min=-0.001595 max=0.001558 Jy/beam ! Clean residual mean=-0.000006 rms=0.000405 Jy/beam ! Combined flux in latest and established models = 0.0643636 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.0643636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082021Jy sigma=0.000681 ! Fit after self-cal, rms=0.082052Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.1536e-05 Jy ! Component: 100 - total flux cleaned = 4.86312e-05 Jy ! Component: 150 - total flux cleaned = 4.88207e-05 Jy ! Component: 200 - total flux cleaned = 4.34347e-05 Jy ! Total flux subtracted in 200 components = 4.34347e-05 Jy ! Clean residual min=-0.001565 max=0.001578 Jy/beam ! Clean residual mean=-0.000006 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.0644071 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 43 components and 0.064407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082050Jy sigma=0.000681 ! Fit after self-cal, rms=0.082053Jy sigma=0.000681 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082053Jy sigma=0.000681 ! Fit after self-cal, rms=0.082451Jy sigma=0.000681 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.659 mas, bmaj=13.28 mas, bpa=-5.377 degrees ! Estimated noise=853.451 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.26151e-05 Jy ! Component: 100 - total flux cleaned = -0.000122734 Jy ! Component: 150 - total flux cleaned = -0.000152981 Jy ! Component: 200 - total flux cleaned = -0.000175464 Jy ! Total flux subtracted in 200 components = -0.000175464 Jy ! Clean residual min=-0.001798 max=0.001935 Jy/beam ! Clean residual mean=-0.000013 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.0642316 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 46 components and 0.0642316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082451Jy sigma=0.000681 ! Fit after self-cal, rms=0.082459Jy sigma=0.000681 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.12972e-05 Jy ! Component: 100 - total flux cleaned = 6.99623e-07 Jy ! Component: 150 - total flux cleaned = -2.21141e-05 Jy ! Component: 200 - total flux cleaned = -3.91748e-05 Jy ! Total flux subtracted in 200 components = -3.91748e-05 Jy ! Clean residual min=-0.001809 max=0.001932 Jy/beam ! Clean residual mean=-0.000013 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.0641924 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 46 components and 0.0641924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082460Jy sigma=0.000681 ! Fit after self-cal, rms=0.082461Jy sigma=0.000681 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.411 mas, bmaj=8.294 mas, bpa=-2.825 degrees ! Estimated noise=687.277 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.411 x 8.294 at -2.825 degrees (North through East) ! Clean map min=-0.0015871 max=0.062618 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.847 mas, bmaj=6.941 mas, bpa=-1.675 degrees ! Estimated noise=995.431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0483693 Jy ! Component: 100 - total flux cleaned = 0.0590375 Jy ! Component: 150 - total flux cleaned = 0.0613269 Jy ! Component: 200 - total flux cleaned = 0.0619623 Jy ! Total flux subtracted in 200 components = 0.0619623 Jy ! Clean residual min=-0.002395 max=0.002794 Jy/beam ! Clean residual mean=-0.000007 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.0619623 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0619623 Jy ! Inverting map and beam ! Estimated beam: bmin=3.411 mas, bmaj=8.294 mas, bpa=-2.825 degrees ! Estimated noise=687.277 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018627 Jy ! Component: 100 - total flux cleaned = 0.00237557 Jy ! Component: 150 - total flux cleaned = 0.00249642 Jy ! Component: 200 - total flux cleaned = 0.00254491 Jy ! Total flux subtracted in 200 components = 0.00254491 Jy ! Clean residual min=-0.001563 max=0.001592 Jy/beam ! Clean residual mean=-0.000007 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.0645072 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 23 components and 0.0645072 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.659 mas, bmaj=13.28 mas, bpa=-5.377 degrees ! Estimated noise=853.451 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.48084e-06 Jy ! Component: 100 - total flux cleaned = -5.81242e-05 Jy ! Component: 150 - total flux cleaned = -0.00011276 Jy ! Component: 200 - total flux cleaned = -0.000148551 Jy ! Total flux subtracted in 200 components = -0.000148551 Jy ! Clean residual min=-0.001816 max=0.001915 Jy/beam ! Clean residual mean=-0.000013 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 0.0643586 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.28557e-05 Jy ! Component: 100 - total flux cleaned = -4.34296e-05 Jy ! Component: 150 - total flux cleaned = -6.20227e-05 Jy ! Component: 200 - total flux cleaned = -7.34647e-05 Jy ! Total flux subtracted in 200 components = -7.34647e-05 Jy ! Clean residual min=-0.001806 max=0.001925 Jy/beam ! Clean residual mean=-0.000013 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.0642852 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 35 components and 0.0642852 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.411 mas, bmaj=8.294 mas, bpa=-2.825 degrees ! Estimated noise=687.277 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000110704 Jy ! Component: 100 - total flux cleaned = -8.87612e-05 Jy ! Component: 150 - total flux cleaned = -6.94424e-05 Jy ! Component: 200 - total flux cleaned = -6.91251e-05 Jy ! Total flux subtracted in 200 components = -6.91251e-05 Jy ! Clean residual min=-0.001577 max=0.001598 Jy/beam ! Clean residual mean=-0.000006 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.0642161 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 46 components and 0.0642161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082460Jy sigma=0.000681 ! Fit after self-cal, rms=0.082451Jy sigma=0.000681 wmodel J0930+0058_S_2017_06_10_pus_map.mod ! Writing 46 model components to file: J0930+0058_S_2017_06_10_pus_map.mod wobs J0930+0058_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0930+0058_S_2017_06_10_pus_uvs.fits wwins J0930+0058_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J0930+0058_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.69434e-05 Jy ! Component: 100 - total flux cleaned = -0.000333995 Jy ! Component: 150 - total flux cleaned = -0.000517195 Jy ! Component: 200 - total flux cleaned = -0.000666051 Jy ! Component: 250 - total flux cleaned = -0.000786085 Jy ! Component: 300 - total flux cleaned = -0.000855673 Jy ! Component: 350 - total flux cleaned = -0.000877934 Jy ! Component: 400 - total flux cleaned = -0.000878104 Jy ! Component: 450 - total flux cleaned = -0.000921575 Jy ! Component: 500 - total flux cleaned = -0.000963911 Jy ! Component: 550 - total flux cleaned = -0.000984332 Jy ! Component: 600 - total flux cleaned = -0.00100443 Jy ! Component: 650 - total flux cleaned = -0.00104395 Jy ! Component: 700 - total flux cleaned = -0.00110179 Jy ! Component: 750 - total flux cleaned = -0.00104405 Jy ! Component: 800 - total flux cleaned = -0.00111916 Jy ! Component: 850 - total flux cleaned = -0.00111892 Jy ! Component: 900 - total flux cleaned = -0.00119172 Jy ! Component: 950 - total flux cleaned = -0.0012101 Jy ! Component: 1000 - total flux cleaned = -0.00133362 Jy ! Component: 1050 - total flux cleaned = -0.00140318 Jy ! Component: 1100 - total flux cleaned = -0.00147159 Jy ! Component: 1150 - total flux cleaned = -0.00153913 Jy ! Component: 1200 - total flux cleaned = -0.0015557 Jy ! Component: 1250 - total flux cleaned = -0.00157235 Jy ! Component: 1300 - total flux cleaned = -0.00163762 Jy ! Component: 1350 - total flux cleaned = -0.00171791 Jy ! Component: 1400 - total flux cleaned = -0.00171779 Jy ! Component: 1450 - total flux cleaned = -0.00179668 Jy ! Component: 1500 - total flux cleaned = -0.00184334 Jy ! Component: 1550 - total flux cleaned = -0.00192053 Jy ! Component: 1600 - total flux cleaned = -0.00199692 Jy ! Component: 1650 - total flux cleaned = -0.00207252 Jy ! Component: 1700 - total flux cleaned = -0.00214734 Jy ! Component: 1750 - total flux cleaned = -0.00216214 Jy ! Component: 1800 - total flux cleaned = -0.0022356 Jy ! Component: 1850 - total flux cleaned = -0.00232297 Jy ! Component: 1900 - total flux cleaned = -0.00235169 Jy ! Component: 1950 - total flux cleaned = -0.00233729 Jy ! Component: 2000 - total flux cleaned = -0.00237986 Jy ! Component: 2050 - total flux cleaned = -0.00242202 Jy ! Component: 2100 - total flux cleaned = -0.00250562 Jy ! Component: 2150 - total flux cleaned = -0.00247782 Jy ! Component: 2200 - total flux cleaned = -0.00254638 Jy ! Component: 2250 - total flux cleaned = -0.00257351 Jy ! Component: 2300 - total flux cleaned = -0.00261404 Jy ! Component: 2350 - total flux cleaned = -0.00260076 Jy ! Component: 2400 - total flux cleaned = -0.00270667 Jy ! Component: 2450 - total flux cleaned = -0.00266722 Jy ! Component: 2500 - total flux cleaned = -0.00266725 Jy ! Component: 2550 - total flux cleaned = -0.00271908 Jy ! Component: 2600 - total flux cleaned = -0.00277037 Jy ! Component: 2650 - total flux cleaned = -0.00280866 Jy ! Component: 2700 - total flux cleaned = -0.0027962 Jy ! Component: 2750 - total flux cleaned = -0.00282139 Jy ! Component: 2800 - total flux cleaned = -0.00285888 Jy ! Component: 2850 - total flux cleaned = -0.00285896 Jy ! Component: 2900 - total flux cleaned = -0.00290804 Jy ! Component: 2950 - total flux cleaned = -0.00290806 Jy ! Component: 3000 - total flux cleaned = -0.00293232 Jy ! Component: 3050 - total flux cleaned = -0.00299243 Jy ! Component: 3100 - total flux cleaned = -0.00298052 Jy ! Component: 3150 - total flux cleaned = -0.00294481 Jy ! Component: 3200 - total flux cleaned = -0.00298016 Jy ! Component: 3250 - total flux cleaned = -0.00303874 Jy ! Component: 3300 - total flux cleaned = -0.00302705 Jy ! Component: 3350 - total flux cleaned = -0.00302693 Jy ! Component: 3400 - total flux cleaned = -0.00304993 Jy ! Component: 3450 - total flux cleaned = -0.00303856 Jy ! Component: 3500 - total flux cleaned = -0.00302729 Jy ! Component: 3550 - total flux cleaned = -0.00307222 Jy ! Component: 3600 - total flux cleaned = -0.00303884 Jy ! Component: 3650 - total flux cleaned = -0.00304993 Jy ! Component: 3700 - total flux cleaned = -0.00309407 Jy ! Component: 3750 - total flux cleaned = -0.00307225 Jy ! Component: 3800 - total flux cleaned = -0.00307223 Jy ! Component: 3850 - total flux cleaned = -0.00312642 Jy ! Component: 3900 - total flux cleaned = -0.00312634 Jy ! Component: 3950 - total flux cleaned = -0.00312635 Jy ! Component: 4000 - total flux cleaned = -0.00316899 Jy ! Component: 4050 - total flux cleaned = -0.0031161 Jy ! Total flux subtracted in 4096 components = -0.00316864 Jy ! Clean residual min=-0.000653 max=0.000647 Jy/beam ! Clean residual mean=-0.000002 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.0610474 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 338 components and 0.0610475 Jy ![Exited script file: muppet] wmap "J0930+0058_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.411 x 8.294 at -2.825 degrees (North through East) ! Clean map min=-0.0013745 max=0.062603 Jy/beam ! Writing clean map to FITS file: J0930+0058_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0626027 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000192708 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.92348 0.92348 1.84696 3.69392 7.38784 14.7757 29.5514 59.1027 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.062 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.411 x 8.294 at -2.825 degrees (North through East) ! Clean map min=-0.0013745 max=0.062603 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0930+0058_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:50:37 2019