! Started logfile: J0929-1820_S_2017_02_24_pus_uvs.log on Sat May 4 11:23:11 2019 obs J0929-1820_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0929-1820_S_2017_02_24_pus_uva.fits ! AN table 1: 95 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975673 visibilities/baseline/integration-bin. ! Found source: J0929-1820 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 16684 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0929-1820_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 13 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 298 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.837611Jy sigma=0.006168 ! Fit after self-cal, rms=0.819620Jy sigma=0.006041 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.596 mas, bmaj=7.004 mas, bpa=-9.124 degrees ! Estimated noise=1423.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.145309 Jy ! Component: 100 - total flux cleaned = 0.179138 Jy ! Total flux subtracted in 100 components = 0.179138 Jy ! Clean residual min=-0.012642 max=0.017109 Jy/beam ! Clean residual mean=0.000010 rms=0.003555 Jy/beam ! Combined flux in latest and established models = 0.179138 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.179138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122312Jy sigma=0.000838 ! Fit after self-cal, rms=0.122296Jy sigma=0.000838 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=8.186 mas, bpa=-8.019 degrees ! Estimated noise=815.999 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105354 Jy ! Component: 100 - total flux cleaned = 0.0124382 Jy ! Component: 150 - total flux cleaned = 0.012321 Jy ! Component: 200 - total flux cleaned = 0.0122274 Jy ! Total flux subtracted in 200 components = 0.0122274 Jy ! Clean residual min=-0.012696 max=0.018503 Jy/beam ! Clean residual mean=0.000048 rms=0.004286 Jy/beam ! Combined flux in latest and established models = 0.191365 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 18 components and 0.191365 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121278Jy sigma=0.000833 ! Fit after self-cal, rms=0.121299Jy sigma=0.000833 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.95 HN 1.00 KP 0.91 ! LA 0.87 MK 0.91 NL 0.93 OV 0.99 ! PT 1.55 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.88 HN 1.04 KP 0.87 ! LA 0.86 MK 1.09 NL 0.93 OV 1.00 ! PT 1.50 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.91 HN 0.99 KP 0.94 ! LA 0.92 MK 1.08 NL 1.03 OV 0.92 ! PT 1.55 SC 1.02 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 0.93 KP 1.00* ! LA 0.89 MK 1.00 NL 1.00* OV 0.93 ! PT 1.49 SC 1.00* ! ! ! Fit before self-cal, rms=0.121299Jy sigma=0.000833 ! Fit after self-cal, rms=0.125011Jy sigma=0.000782 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.247 mas, bmaj=8.178 mas, bpa=-7.849 degrees ! Estimated noise=809.319 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00118866 Jy ! Component: 100 - total flux cleaned = -0.00102656 Jy ! Component: 150 - total flux cleaned = -0.000880963 Jy ! Component: 200 - total flux cleaned = -0.000814996 Jy ! Total flux subtracted in 200 components = -0.000814996 Jy ! Clean residual min=-0.010539 max=0.014087 Jy/beam ! Clean residual mean=0.000041 rms=0.003276 Jy/beam ! Combined flux in latest and established models = 0.19055 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 27 components and 0.19055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124890Jy sigma=0.000782 ! Fit after self-cal, rms=0.125074Jy sigma=0.000781 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125074Jy sigma=0.000781 ! Fit after self-cal, rms=0.125590Jy sigma=0.000781 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.258 mas, bmaj=8.208 mas, bpa=-7.852 degrees ! Estimated noise=808.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000869321 Jy ! Component: 100 - total flux cleaned = -0.000939422 Jy ! Component: 150 - total flux cleaned = -0.000878989 Jy ! Component: 200 - total flux cleaned = -0.000823489 Jy ! Total flux subtracted in 200 components = -0.000823489 Jy ! Clean residual min=-0.010465 max=0.014020 Jy/beam ! Clean residual mean=0.000041 rms=0.003274 Jy/beam ! Combined flux in latest and established models = 0.189727 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 0.189727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125502Jy sigma=0.000780 ! Fit after self-cal, rms=0.125511Jy sigma=0.000780 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.66811e-05 Jy ! Component: 100 - total flux cleaned = 0.000100322 Jy ! Component: 150 - total flux cleaned = 0.000148485 Jy ! Component: 200 - total flux cleaned = 0.000196526 Jy ! Total flux subtracted in 200 components = 0.000196526 Jy ! Clean residual min=-0.010456 max=0.013906 Jy/beam ! Clean residual mean=0.000041 rms=0.003270 Jy/beam ! Combined flux in latest and established models = 0.189923 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 32 components and 0.189923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125464Jy sigma=0.000780 ! Fit after self-cal, rms=0.125466Jy sigma=0.000780 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125466Jy sigma=0.000780 ! Fit after self-cal, rms=0.270780Jy sigma=0.000679 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=8.402 mas, bpa=-6.964 degrees ! Estimated noise=817.367 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00028682 Jy ! Component: 100 - total flux cleaned = 0.000290748 Jy ! Component: 150 - total flux cleaned = 0.000302723 Jy ! Component: 200 - total flux cleaned = 0.000306895 Jy ! Total flux subtracted in 200 components = 0.000306895 Jy ! Clean residual min=-0.002748 max=0.003238 Jy/beam ! Clean residual mean=0.000004 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.19023 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 38 components and 0.19023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270510Jy sigma=0.000678 ! Fit after self-cal, rms=0.272226Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.5, 10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00209685 Jy ! Component: 100 - total flux cleaned = 0.00217671 Jy ! Component: 150 - total flux cleaned = 0.00210292 Jy ! Component: 200 - total flux cleaned = 0.00203731 Jy ! Total flux subtracted in 200 components = 0.00203731 Jy ! Clean residual min=-0.002379 max=0.002203 Jy/beam ! Clean residual mean=0.000005 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.192268 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 59 components and 0.192268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272119Jy sigma=0.000676 ! Fit after self-cal, rms=0.272098Jy sigma=0.000676 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.272098Jy sigma=0.000676 ! Fit after self-cal, rms=0.295167Jy sigma=0.000676 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.608 mas, bmaj=15.58 mas, bpa=-3.718 degrees ! Estimated noise=1020.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000428218 Jy ! Component: 100 - total flux cleaned = 0.000400171 Jy ! Component: 150 - total flux cleaned = 0.000370746 Jy ! Component: 200 - total flux cleaned = 0.000370636 Jy ! Total flux subtracted in 200 components = 0.000370636 Jy ! Clean residual min=-0.001870 max=0.002119 Jy/beam ! Clean residual mean=0.000008 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.192638 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 75 components and 0.192638 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295131Jy sigma=0.000676 ! Fit after self-cal, rms=0.295210Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.63344e-05 Jy ! Component: 100 - total flux cleaned = 8.645e-05 Jy ! Component: 150 - total flux cleaned = 8.67127e-05 Jy ! Component: 200 - total flux cleaned = 0.000104998 Jy ! Total flux subtracted in 200 components = 0.000104998 Jy ! Clean residual min=-0.001836 max=0.002076 Jy/beam ! Clean residual mean=0.000008 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.192743 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.192743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295182Jy sigma=0.000676 ! Fit after self-cal, rms=0.295172Jy sigma=0.000676 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=8.423 mas, bpa=-6.813 degrees ! Estimated noise=818.67 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.253 x 8.423 at -6.813 degrees (North through East) ! Clean map min=-0.0020664 max=0.18747 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.636 mas, bmaj=7.239 mas, bpa=-7.794 degrees ! Estimated noise=1419.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.144749 Jy ! Component: 100 - total flux cleaned = 0.176404 Jy ! Component: 150 - total flux cleaned = 0.18594 Jy ! Component: 200 - total flux cleaned = 0.189981 Jy ! Total flux subtracted in 200 components = 0.189981 Jy ! Clean residual min=-0.004540 max=0.004937 Jy/beam ! Clean residual mean=0.000002 rms=0.001133 Jy/beam ! Combined flux in latest and established models = 0.189981 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.189981 Jy ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=8.423 mas, bpa=-6.813 degrees ! Estimated noise=818.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166928 Jy ! Component: 100 - total flux cleaned = 0.002035 Jy ! Component: 150 - total flux cleaned = 0.00193382 Jy ! Component: 200 - total flux cleaned = 0.00202537 Jy ! Total flux subtracted in 200 components = 0.00202537 Jy ! Clean residual min=-0.002981 max=0.002407 Jy/beam ! Clean residual mean=0.000003 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.192006 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 30 components and 0.192006 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.608 mas, bmaj=15.58 mas, bpa=-3.718 degrees ! Estimated noise=1020.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208384 Jy ! Component: 100 - total flux cleaned = 0.000262433 Jy ! Component: 150 - total flux cleaned = 0.000307803 Jy ! Component: 200 - total flux cleaned = 0.000345713 Jy ! Total flux subtracted in 200 components = 0.000345713 Jy ! Clean residual min=-0.002062 max=0.002171 Jy/beam ! Clean residual mean=0.000007 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.192352 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.9299e-05 Jy ! Component: 100 - total flux cleaned = 5.73155e-05 Jy ! Component: 150 - total flux cleaned = 8.58965e-05 Jy ! Component: 200 - total flux cleaned = 0.000112831 Jy ! Total flux subtracted in 200 components = 0.000112831 Jy ! Clean residual min=-0.001981 max=0.002150 Jy/beam ! Clean residual mean=0.000007 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.192465 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 52 components and 0.192465 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=8.423 mas, bpa=-6.813 degrees ! Estimated noise=818.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225372 Jy ! Component: 100 - total flux cleaned = -0.000285756 Jy ! Component: 150 - total flux cleaned = -0.000338958 Jy ! Component: 200 - total flux cleaned = -0.000385818 Jy ! Total flux subtracted in 200 components = -0.000385818 Jy ! Clean residual min=-0.002102 max=0.002107 Jy/beam ! Clean residual mean=0.000003 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.192079 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 64 components and 0.192079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294915Jy sigma=0.000676 ! Fit after self-cal, rms=0.294858Jy sigma=0.000676 wmodel J0929-1820_S_2017_02_24_pus_map.mod ! Writing 64 model components to file: J0929-1820_S_2017_02_24_pus_map.mod wobs J0929-1820_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0929-1820_S_2017_02_24_pus_uvs.fits wwins J0929-1820_S_2017_02_24_pus_map.win ! wwins: Wrote 2 windows to J0929-1820_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117287 Jy ! Component: 100 - total flux cleaned = -0.000190329 Jy ! Component: 150 - total flux cleaned = -0.000293311 Jy ! Component: 200 - total flux cleaned = -0.000326334 Jy ! Component: 250 - total flux cleaned = -0.000293674 Jy ! Component: 300 - total flux cleaned = -0.000261674 Jy ! Component: 350 - total flux cleaned = -0.000231856 Jy ! Component: 400 - total flux cleaned = -0.000231437 Jy ! Component: 450 - total flux cleaned = -0.000174089 Jy ! Component: 500 - total flux cleaned = -9.00149e-05 Jy ! Component: 550 - total flux cleaned = -6.2481e-05 Jy ! Component: 600 - total flux cleaned = -8.831e-06 Jy ! Component: 650 - total flux cleaned = -8.40723e-06 Jy ! Component: 700 - total flux cleaned = 4.34334e-05 Jy ! Component: 750 - total flux cleaned = 1.76828e-05 Jy ! Component: 800 - total flux cleaned = 1.68097e-05 Jy ! Component: 850 - total flux cleaned = -8.21706e-05 Jy ! Component: 900 - total flux cleaned = -0.000130647 Jy ! Component: 950 - total flux cleaned = -0.000106948 Jy ! Component: 1000 - total flux cleaned = -0.000201556 Jy ! Component: 1050 - total flux cleaned = -0.000248499 Jy ! Component: 1100 - total flux cleaned = -0.000340127 Jy ! Component: 1150 - total flux cleaned = -0.000317053 Jy ! Component: 1200 - total flux cleaned = -0.00047303 Jy ! Component: 1250 - total flux cleaned = -0.000516559 Jy ! Component: 1300 - total flux cleaned = -0.000560191 Jy ! Component: 1350 - total flux cleaned = -0.000624488 Jy ! Component: 1400 - total flux cleaned = -0.000709462 Jy ! Component: 1450 - total flux cleaned = -0.000814063 Jy ! Component: 1500 - total flux cleaned = -0.000834627 Jy ! Component: 1550 - total flux cleaned = -0.000875411 Jy ! Component: 1600 - total flux cleaned = -0.000956832 Jy ! Component: 1650 - total flux cleaned = -0.00103682 Jy ! Component: 1700 - total flux cleaned = -0.00115591 Jy ! Component: 1750 - total flux cleaned = -0.00119512 Jy ! Component: 1800 - total flux cleaned = -0.0012536 Jy ! Component: 1850 - total flux cleaned = -0.00127324 Jy ! Component: 1900 - total flux cleaned = -0.00140686 Jy ! Component: 1950 - total flux cleaned = -0.00142616 Jy ! Component: 2000 - total flux cleaned = -0.00150114 Jy ! Component: 2050 - total flux cleaned = -0.00150086 Jy ! Component: 2100 - total flux cleaned = -0.00150087 Jy ! Component: 2150 - total flux cleaned = -0.00157398 Jy ! Component: 2200 - total flux cleaned = -0.00159205 Jy ! Component: 2250 - total flux cleaned = -0.00157413 Jy ! Component: 2300 - total flux cleaned = -0.0016277 Jy ! Component: 2350 - total flux cleaned = -0.00166325 Jy ! Component: 2400 - total flux cleaned = -0.00173349 Jy ! Component: 2450 - total flux cleaned = -0.00178564 Jy ! Component: 2500 - total flux cleaned = -0.0017856 Jy ! Component: 2550 - total flux cleaned = -0.00178544 Jy ! Component: 2600 - total flux cleaned = -0.00181926 Jy ! Component: 2650 - total flux cleaned = -0.00183615 Jy ! Component: 2700 - total flux cleaned = -0.00183626 Jy ! Component: 2750 - total flux cleaned = -0.00181935 Jy ! Component: 2800 - total flux cleaned = -0.00180292 Jy ! Component: 2850 - total flux cleaned = -0.00181945 Jy ! Component: 2900 - total flux cleaned = -0.00181934 Jy ! Component: 2950 - total flux cleaned = -0.00186771 Jy ! Component: 3000 - total flux cleaned = -0.00186756 Jy ! Component: 3050 - total flux cleaned = -0.00186776 Jy ! Component: 3100 - total flux cleaned = -0.00182052 Jy ! Component: 3150 - total flux cleaned = -0.00183613 Jy ! Component: 3200 - total flux cleaned = -0.00186741 Jy ! Component: 3250 - total flux cleaned = -0.00186738 Jy ! Component: 3300 - total flux cleaned = -0.00195921 Jy ! Component: 3350 - total flux cleaned = -0.00192871 Jy ! Component: 3400 - total flux cleaned = -0.00191358 Jy ! Component: 3450 - total flux cleaned = -0.00194373 Jy ! Component: 3500 - total flux cleaned = -0.00195864 Jy ! Component: 3550 - total flux cleaned = -0.00197345 Jy ! Component: 3600 - total flux cleaned = -0.00192919 Jy ! Component: 3650 - total flux cleaned = -0.00197326 Jy ! Component: 3700 - total flux cleaned = -0.00200247 Jy ! Component: 3750 - total flux cleaned = -0.00201706 Jy ! Component: 3800 - total flux cleaned = -0.00204591 Jy ! Component: 3850 - total flux cleaned = -0.0020602 Jy ! Component: 3900 - total flux cleaned = -0.00208866 Jy ! Component: 3950 - total flux cleaned = -0.00215933 Jy ! Component: 4000 - total flux cleaned = -0.00215915 Jy ! Component: 4050 - total flux cleaned = -0.00217296 Jy ! Total flux subtracted in 4096 components = -0.00217289 Jy ! Clean residual min=-0.000979 max=0.000785 Jy/beam ! Clean residual mean=0.000002 rms=0.000255 Jy/beam ! Combined flux in latest and established models = 0.189906 Jy keep ! Adding 292 model components to the UV plane model. ! The established model now contains 356 components and 0.189906 Jy ![Exited script file: muppet] wmap "J0929-1820_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.253 x 8.423 at -6.813 degrees (North through East) ! Clean map min=-0.0014763 max=0.18802 Jy/beam ! Writing clean map to FITS file: J0929-1820_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.188016 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000255201 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.407201 0.407201 0.814401 1.6288 3.2576 6.51521 13.0304 26.0608 52.1217 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.188 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.253 x 8.423 at -6.813 degrees (North through East) ! Clean map min=-0.0014763 max=0.18802 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0929-1820_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:23:16 2019