! Started logfile: J0927-2034_S_2017_08_05_pus_uvs.log on Thu May 9 19:26:05 2019 obs J0927-2034_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J0927-2034_S_2017_08_05_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.557265 visibilities/baseline/integration-bin. ! Found source: J0927-2034 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 1304 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0927-2034_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 32 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.325661Jy sigma=0.002236 ! Fit after self-cal, rms=0.279766Jy sigma=0.001928 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.664 mas, bmaj=11.51 mas, bpa=-1.921 degrees ! Estimated noise=3911.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.574577 Jy ! Component: 100 - total flux cleaned = 0.700291 Jy ! Total flux subtracted in 100 components = 0.700291 Jy ! Clean residual min=-0.030068 max=0.038982 Jy/beam ! Clean residual mean=0.000341 rms=0.009050 Jy/beam ! Combined flux in latest and established models = 0.700291 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.700291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156530Jy sigma=0.000908 ! Fit after self-cal, rms=0.156534Jy sigma=0.000908 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.264 mas, bmaj=12.54 mas, bpa=-1.717 degrees ! Estimated noise=3363.5 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0491219 Jy ! Component: 100 - total flux cleaned = 0.0722764 Jy ! Component: 150 - total flux cleaned = 0.0852842 Jy ! Component: 200 - total flux cleaned = 0.0928709 Jy ! Total flux subtracted in 200 components = 0.0928709 Jy ! Clean residual min=-0.023809 max=0.018284 Jy/beam ! Clean residual mean=-0.000058 rms=0.005752 Jy/beam ! Combined flux in latest and established models = 0.793162 Jy ! Performing phase self-cal ! Adding 69 model components to the UV plane model. ! The established model now contains 71 components and 0.793162 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137440Jy sigma=0.000816 ! Fit after self-cal, rms=0.137405Jy sigma=0.000815 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.97 KP 1.03 ! LA 1.01 MK 1.00* NL 0.89 OV 1.02 ! PT 1.01 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.01 KP 1.01 ! LA 0.98 MK 1.00* NL 1.05 OV 1.08 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.02 KP 0.88 ! LA 0.76 MK 1.00* NL 1.16 OV 0.98 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.137405Jy sigma=0.000815 ! Fit after self-cal, rms=0.101316Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.283 mas, bmaj=12.67 mas, bpa=-0.7753 degrees ! Estimated noise=3413.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00298909 Jy ! Component: 100 - total flux cleaned = -0.00292745 Jy ! Component: 150 - total flux cleaned = -0.00298524 Jy ! Component: 200 - total flux cleaned = -0.00303712 Jy ! Total flux subtracted in 200 components = -0.00303712 Jy ! Clean residual min=-0.007384 max=0.005868 Jy/beam ! Clean residual mean=0.000034 rms=0.001846 Jy/beam ! Combined flux in latest and established models = 0.790125 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 83 components and 0.790125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101191Jy sigma=0.000658 ! Fit after self-cal, rms=0.101115Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101115Jy sigma=0.000658 ! Fit after self-cal, rms=0.101064Jy sigma=0.000657 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.283 mas, bmaj=12.68 mas, bpa=-0.7282 degrees ! Estimated noise=3411.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00213397 Jy ! Component: 100 - total flux cleaned = -0.0022314 Jy ! Component: 150 - total flux cleaned = -0.00231631 Jy ! Component: 200 - total flux cleaned = -0.00231472 Jy ! Total flux subtracted in 200 components = -0.00231472 Jy ! Clean residual min=-0.007065 max=0.005788 Jy/beam ! Clean residual mean=0.000031 rms=0.001762 Jy/beam ! Combined flux in latest and established models = 0.78781 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 89 components and 0.78781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100993Jy sigma=0.000657 ! Fit after self-cal, rms=0.100988Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000277644 Jy ! Component: 100 - total flux cleaned = -0.000315919 Jy ! Component: 150 - total flux cleaned = -0.000349653 Jy ! Component: 200 - total flux cleaned = -0.000348722 Jy ! Total flux subtracted in 200 components = -0.000348722 Jy ! Clean residual min=-0.007028 max=0.005920 Jy/beam ! Clean residual mean=0.000033 rms=0.001748 Jy/beam ! Combined flux in latest and established models = 0.787462 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 91 components and 0.787462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100963Jy sigma=0.000657 ! Fit after self-cal, rms=0.100962Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100962Jy sigma=0.000657 ! Fit after self-cal, rms=0.100932Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.283 mas, bmaj=12.69 mas, bpa=-0.6956 degrees ! Estimated noise=3409.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.001661 Jy ! Component: 100 - total flux cleaned = -0.00176554 Jy ! Component: 150 - total flux cleaned = -0.00182431 Jy ! Component: 200 - total flux cleaned = -0.00185162 Jy ! Total flux subtracted in 200 components = -0.00185162 Jy ! Clean residual min=-0.006863 max=0.005737 Jy/beam ! Clean residual mean=0.000030 rms=0.001703 Jy/beam ! Combined flux in latest and established models = 0.78561 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 95 components and 0.78561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100895Jy sigma=0.000656 ! Fit after self-cal, rms=0.100894Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000159499 Jy ! Component: 100 - total flux cleaned = -0.000186415 Jy ! Component: 150 - total flux cleaned = -0.00018688 Jy ! Component: 200 - total flux cleaned = -0.0001874 Jy ! Total flux subtracted in 200 components = -0.0001874 Jy ! Clean residual min=-0.006850 max=0.005805 Jy/beam ! Clean residual mean=0.000030 rms=0.001697 Jy/beam ! Combined flux in latest and established models = 0.785423 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 96 components and 0.785423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100882Jy sigma=0.000656 ! Fit after self-cal, rms=0.100881Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100881Jy sigma=0.000656 ! Fit after self-cal, rms=0.100864Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.664 mas, bmaj=17.24 mas, bpa=-9.891 degrees ! Estimated noise=4012.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100064 Jy ! Component: 100 - total flux cleaned = -0.001032 Jy ! Component: 150 - total flux cleaned = -0.00108756 Jy ! Component: 200 - total flux cleaned = -0.00113717 Jy ! Total flux subtracted in 200 components = -0.00113717 Jy ! Clean residual min=-0.006920 max=0.005783 Jy/beam ! Clean residual mean=0.000045 rms=0.002022 Jy/beam ! Combined flux in latest and established models = 0.784285 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 102 components and 0.784285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100848Jy sigma=0.000656 ! Fit after self-cal, rms=0.100844Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.85127e-05 Jy ! Component: 100 - total flux cleaned = 2.68072e-05 Jy ! Component: 150 - total flux cleaned = 2.34007e-05 Jy ! Component: 200 - total flux cleaned = -1.62267e-05 Jy ! Total flux subtracted in 200 components = -1.62267e-05 Jy ! Clean residual min=-0.006943 max=0.005794 Jy/beam ! Clean residual mean=0.000045 rms=0.002019 Jy/beam ! Combined flux in latest and established models = 0.784269 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 109 components and 0.784269 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100842Jy sigma=0.000656 ! Fit after self-cal, rms=0.100839Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.283 mas, bmaj=12.7 mas, bpa=-0.6699 degrees ! Estimated noise=3408.63 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.283 x 12.7 at -0.6699 degrees (North through East) ! Clean map min=-0.0065221 max=0.74156 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100839Jy sigma=0.000656 ! Fit after self-cal, rms=0.093230Jy sigma=0.000599 ! Inverting map and beam ! Estimated beam: bmin=4.282 mas, bmaj=12.7 mas, bpa=-0.6512 degrees ! Estimated noise=3407.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013198 Jy ! Component: 100 - total flux cleaned = -0.00151447 Jy ! Component: 150 - total flux cleaned = -0.00160312 Jy ! Component: 200 - total flux cleaned = -0.00168056 Jy ! Total flux subtracted in 200 components = -0.00168056 Jy ! Clean residual min=-0.006415 max=0.005410 Jy/beam ! Clean residual mean=0.000029 rms=0.001630 Jy/beam ! Combined flux in latest and established models = 0.782589 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 121 components and 0.782588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093205Jy sigma=0.000599 ! Fit after self-cal, rms=0.093204Jy sigma=0.000599 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.26925e-05 Jy ! Component: 100 - total flux cleaned = -2.28997e-05 Jy ! Component: 150 - total flux cleaned = -4.02241e-05 Jy ! Component: 200 - total flux cleaned = -5.61266e-05 Jy ! Total flux subtracted in 200 components = -5.61266e-05 Jy ! Clean residual min=-0.006420 max=0.005397 Jy/beam ! Clean residual mean=0.000030 rms=0.001627 Jy/beam ! Combined flux in latest and established models = 0.782532 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 124 components and 0.782532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093196Jy sigma=0.000599 ! Fit after self-cal, rms=0.093197Jy sigma=0.000599 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093197Jy sigma=0.000599 ! Fit after self-cal, rms=0.093204Jy sigma=0.000599 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.694 mas, bmaj=11.82 mas, bpa=-0.2377 degrees ! Estimated noise=3948.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.575062 Jy ! Component: 100 - total flux cleaned = 0.701229 Jy ! Component: 150 - total flux cleaned = 0.739715 Jy ! Component: 200 - total flux cleaned = 0.756892 Jy ! Total flux subtracted in 200 components = 0.756892 Jy ! Clean residual min=-0.009587 max=0.010769 Jy/beam ! Clean residual mean=0.000124 rms=0.003024 Jy/beam ! Combined flux in latest and established models = 0.756893 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.756893 Jy ! Inverting map and beam ! Estimated beam: bmin=4.282 mas, bmaj=12.71 mas, bpa=-0.6309 degrees ! Estimated noise=3406.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013025 Jy ! Component: 100 - total flux cleaned = 0.0195812 Jy ! Component: 150 - total flux cleaned = 0.0230225 Jy ! Component: 200 - total flux cleaned = 0.0236703 Jy ! Total flux subtracted in 200 components = 0.0236703 Jy ! Clean residual min=-0.007025 max=0.005794 Jy/beam ! Clean residual mean=0.000035 rms=0.001742 Jy/beam ! Combined flux in latest and established models = 0.780563 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 59 components and 0.780563 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.671 mas, bmaj=17.26 mas, bpa=-9.841 degrees ! Estimated noise=4009.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119688 Jy ! Component: 100 - total flux cleaned = 0.0013542 Jy ! Component: 150 - total flux cleaned = 0.00139548 Jy ! Component: 200 - total flux cleaned = 0.00139616 Jy ! Total flux subtracted in 200 components = 0.00139616 Jy ! Clean residual min=-0.006810 max=0.005062 Jy/beam ! Clean residual mean=0.000045 rms=0.001961 Jy/beam ! Combined flux in latest and established models = 0.781959 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.68155e-07 Jy ! Component: 100 - total flux cleaned = 7.0461e-07 Jy ! Component: 150 - total flux cleaned = -1.17224e-06 Jy ! Component: 200 - total flux cleaned = -2.40528e-05 Jy ! Total flux subtracted in 200 components = -2.40528e-05 Jy ! Clean residual min=-0.006766 max=0.004943 Jy/beam ! Clean residual mean=0.000045 rms=0.001943 Jy/beam ! Combined flux in latest and established models = 0.781935 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 67 components and 0.781935 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.282 mas, bmaj=12.71 mas, bpa=-0.6309 degrees ! Estimated noise=3406.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000179835 Jy ! Component: 100 - total flux cleaned = -8.59938e-05 Jy ! Component: 150 - total flux cleaned = -3.82712e-05 Jy ! Component: 200 - total flux cleaned = -3.88078e-05 Jy ! Total flux subtracted in 200 components = -3.88078e-05 Jy ! Clean residual min=-0.006703 max=0.005595 Jy/beam ! Clean residual mean=0.000026 rms=0.001654 Jy/beam ! Combined flux in latest and established models = 0.781896 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 79 components and 0.781896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093269Jy sigma=0.000599 ! Fit after self-cal, rms=0.093267Jy sigma=0.000599 wmodel J0927-2034_S_2017_08_05_pus_map.mod ! Writing 79 model components to file: J0927-2034_S_2017_08_05_pus_map.mod wobs J0927-2034_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J0927-2034_S_2017_08_05_pus_uvs.fits wwins J0927-2034_S_2017_08_05_pus_map.win ! wwins: Wrote 1 windows to J0927-2034_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00187868 Jy ! Component: 100 - total flux cleaned = -0.00188158 Jy ! Component: 150 - total flux cleaned = -0.00187848 Jy ! Component: 200 - total flux cleaned = -0.00187975 Jy ! Component: 250 - total flux cleaned = -0.00187816 Jy ! Component: 300 - total flux cleaned = -0.00149444 Jy ! Component: 350 - total flux cleaned = -0.00149234 Jy ! Component: 400 - total flux cleaned = -0.00177569 Jy ! Component: 450 - total flux cleaned = -0.00184452 Jy ! Component: 500 - total flux cleaned = -0.00210986 Jy ! Component: 550 - total flux cleaned = -0.00230027 Jy ! Component: 600 - total flux cleaned = -0.00248649 Jy ! Component: 650 - total flux cleaned = -0.00266613 Jy ! Component: 700 - total flux cleaned = -0.00289884 Jy ! Component: 750 - total flux cleaned = -0.00306634 Jy ! Component: 800 - total flux cleaned = -0.00295469 Jy ! Component: 850 - total flux cleaned = -0.00300922 Jy ! Component: 900 - total flux cleaned = -0.00311439 Jy ! Component: 950 - total flux cleaned = -0.00311477 Jy ! Component: 1000 - total flux cleaned = -0.00341533 Jy ! Component: 1050 - total flux cleaned = -0.00370823 Jy ! Component: 1100 - total flux cleaned = -0.0039463 Jy ! Component: 1150 - total flux cleaned = -0.00413396 Jy ! Component: 1200 - total flux cleaned = -0.00450025 Jy ! Component: 1250 - total flux cleaned = -0.00467819 Jy ! Component: 1300 - total flux cleaned = -0.00485404 Jy ! Component: 1350 - total flux cleaned = -0.00498379 Jy ! Component: 1400 - total flux cleaned = -0.00523732 Jy ! Component: 1450 - total flux cleaned = -0.00532059 Jy ! Component: 1500 - total flux cleaned = -0.00552338 Jy ! Component: 1550 - total flux cleaned = -0.00564265 Jy ! Component: 1600 - total flux cleaned = -0.00587677 Jy ! Component: 1650 - total flux cleaned = -0.0059919 Jy ! Component: 1700 - total flux cleaned = -0.00621807 Jy ! Component: 1750 - total flux cleaned = -0.0062919 Jy ! Component: 1800 - total flux cleaned = -0.00643863 Jy ! Component: 1850 - total flux cleaned = -0.00654697 Jy ! Component: 1900 - total flux cleaned = -0.00668793 Jy ! Component: 1950 - total flux cleaned = -0.00682696 Jy ! Component: 2000 - total flux cleaned = -0.00689492 Jy ! Component: 2050 - total flux cleaned = -0.00696219 Jy ! Component: 2100 - total flux cleaned = -0.00706168 Jy ! Component: 2150 - total flux cleaned = -0.00716 Jy ! Component: 2200 - total flux cleaned = -0.00722446 Jy ! Component: 2250 - total flux cleaned = -0.00728827 Jy ! Component: 2300 - total flux cleaned = -0.00735113 Jy ! Component: 2350 - total flux cleaned = -0.00738219 Jy ! Component: 2400 - total flux cleaned = -0.00738229 Jy ! Component: 2450 - total flux cleaned = -0.0074129 Jy ! Component: 2500 - total flux cleaned = -0.00744273 Jy ! Component: 2550 - total flux cleaned = -0.00750192 Jy ! Component: 2600 - total flux cleaned = -0.00747237 Jy ! Component: 2650 - total flux cleaned = -0.00750165 Jy ! Component: 2700 - total flux cleaned = -0.00758819 Jy ! Component: 2750 - total flux cleaned = -0.0076453 Jy ! Component: 2800 - total flux cleaned = -0.00770184 Jy ! Component: 2850 - total flux cleaned = -0.00767395 Jy ! Component: 2900 - total flux cleaned = -0.00767396 Jy ! Component: 2950 - total flux cleaned = -0.00759082 Jy ! Component: 3000 - total flux cleaned = -0.00761829 Jy ! Component: 3050 - total flux cleaned = -0.00750893 Jy ! Component: 3100 - total flux cleaned = -0.00750893 Jy ! Component: 3150 - total flux cleaned = -0.00758991 Jy ! Component: 3200 - total flux cleaned = -0.00753609 Jy ! Component: 3250 - total flux cleaned = -0.00750949 Jy ! Component: 3300 - total flux cleaned = -0.00753615 Jy ! Component: 3350 - total flux cleaned = -0.00751002 Jy ! Component: 3400 - total flux cleaned = -0.00750979 Jy ! Component: 3450 - total flux cleaned = -0.00745758 Jy ! Component: 3500 - total flux cleaned = -0.00735359 Jy ! Component: 3550 - total flux cleaned = -0.00727602 Jy ! Component: 3600 - total flux cleaned = -0.00717301 Jy ! Component: 3650 - total flux cleaned = -0.00712165 Jy ! Component: 3700 - total flux cleaned = -0.00707069 Jy ! Component: 3750 - total flux cleaned = -0.00696896 Jy ! Component: 3800 - total flux cleaned = -0.00696883 Jy ! Component: 3850 - total flux cleaned = -0.006893 Jy ! Component: 3900 - total flux cleaned = -0.00686787 Jy ! Component: 3950 - total flux cleaned = -0.0067925 Jy ! Component: 4000 - total flux cleaned = -0.00676745 Jy ! Component: 4050 - total flux cleaned = -0.0066428 Jy ! Total flux subtracted in 4096 components = -0.00659335 Jy ! Clean residual min=-0.001477 max=0.001652 Jy/beam ! Clean residual mean=0.000007 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 0.775303 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 345 components and 0.775303 Jy ![Exited script file: muppet] wmap "J0927-2034_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.282 x 12.71 at -0.6309 degrees (North through East) ! Clean map min=-0.0064002 max=0.74152 Jy/beam ! Writing clean map to FITS file: J0927-2034_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.741523 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000516598 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.209002 0.209002 0.418004 0.836007 1.67201 3.34403 6.68806 13.3761 26.7522 53.5045 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.741 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.282 x 12.71 at -0.6309 degrees (North through East) ! Clean map min=-0.0064002 max=0.74152 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0927-2034_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:26:11 2019