! Started logfile: J0927-2034_S_2017_01_21_pus_uvs.log on Sun May 5 15:51:17 2019 obs J0927-2034_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0927-2034_S_2017_01_21_pus_uva.fits ! AN table 1: 15 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.368519 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0927-2034 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 796 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0927-2034_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 76 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 92 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.531888Jy sigma=0.003579 ! Fit after self-cal, rms=0.524330Jy sigma=0.003597 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.348 mas, bmaj=6.542 mas, bpa=-4.445 degrees ! Estimated noise=4525.62 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.376517 Jy ! Component: 100 - total flux cleaned = 0.460442 Jy ! Total flux subtracted in 100 components = 0.460442 Jy ! Clean residual min=-0.017916 max=0.028458 Jy/beam ! Clean residual mean=-0.000038 rms=0.005520 Jy/beam ! Combined flux in latest and established models = 0.460442 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.460442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115741Jy sigma=0.000759 ! Fit after self-cal, rms=0.115754Jy sigma=0.000759 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.674 mas, bmaj=7.086 mas, bpa=-2.541 degrees ! Estimated noise=3984.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0373101 Jy ! Component: 100 - total flux cleaned = 0.054505 Jy ! Component: 150 - total flux cleaned = 0.0637502 Jy ! Component: 200 - total flux cleaned = 0.0691827 Jy ! Total flux subtracted in 200 components = 0.0691827 Jy ! Clean residual min=-0.011099 max=0.014810 Jy/beam ! Clean residual mean=0.000012 rms=0.003166 Jy/beam ! Combined flux in latest and established models = 0.529625 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 36 components and 0.529625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105488Jy sigma=0.000667 ! Fit after self-cal, rms=0.105492Jy sigma=0.000667 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.00* HN 0.99 LA 1.01 ! MK 0.98 NL 0.96 OV 1.02 PT 0.98 ! SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00* HN 1.00 LA 1.02 ! MK 0.96 NL 0.98 OV 1.01 PT 0.99 ! SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.02 LA 0.98 ! MK 1.04 NL 0.97 OV 0.94 PT 0.95 ! SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.00* HN 1.07 LA 0.92 ! MK 1.09 NL 1.00* OV 0.94 PT 1.02 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.105492Jy sigma=0.000667 ! Fit after self-cal, rms=0.104649Jy sigma=0.000642 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.672 mas, bmaj=7.1 mas, bpa=-2.445 degrees ! Estimated noise=3982.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021191 Jy ! Component: 100 - total flux cleaned = 0.000410116 Jy ! Component: 150 - total flux cleaned = 0.000469058 Jy ! Component: 200 - total flux cleaned = 0.000520298 Jy ! Total flux subtracted in 200 components = 0.000520298 Jy ! Clean residual min=-0.009252 max=0.008097 Jy/beam ! Clean residual mean=0.000010 rms=0.002146 Jy/beam ! Combined flux in latest and established models = 0.530145 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.530145 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104575Jy sigma=0.000641 ! Fit after self-cal, rms=0.104678Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104678Jy sigma=0.000641 ! Fit after self-cal, rms=0.104761Jy sigma=0.000641 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.671 mas, bmaj=7.1 mas, bpa=-2.436 degrees ! Estimated noise=3983.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000366117 Jy ! Component: 100 - total flux cleaned = 0.000415801 Jy ! Component: 150 - total flux cleaned = 0.000416563 Jy ! Component: 200 - total flux cleaned = 0.000418838 Jy ! Total flux subtracted in 200 components = 0.000418838 Jy ! Clean residual min=-0.009110 max=0.008086 Jy/beam ! Clean residual mean=0.000010 rms=0.002129 Jy/beam ! Combined flux in latest and established models = 0.530564 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.530564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104714Jy sigma=0.000641 ! Fit after self-cal, rms=0.104707Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.54809e-05 Jy ! Component: 100 - total flux cleaned = -3.26126e-06 Jy ! Component: 150 - total flux cleaned = -2.33592e-06 Jy ! Component: 200 - total flux cleaned = 3.285e-05 Jy ! Total flux subtracted in 200 components = 3.285e-05 Jy ! Clean residual min=-0.008984 max=0.008092 Jy/beam ! Clean residual mean=0.000010 rms=0.002118 Jy/beam ! Combined flux in latest and established models = 0.530597 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.530597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104675Jy sigma=0.000641 ! Fit after self-cal, rms=0.104670Jy sigma=0.000641 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104670Jy sigma=0.000641 ! Fit after self-cal, rms=0.104717Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.67 mas, bmaj=7.098 mas, bpa=-2.44 degrees ! Estimated noise=3983.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000410367 Jy ! Component: 100 - total flux cleaned = 0.00044603 Jy ! Component: 150 - total flux cleaned = 0.000445045 Jy ! Component: 200 - total flux cleaned = 0.000446671 Jy ! Total flux subtracted in 200 components = 0.000446671 Jy ! Clean residual min=-0.008932 max=0.008091 Jy/beam ! Clean residual mean=0.000010 rms=0.002110 Jy/beam ! Combined flux in latest and established models = 0.531044 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.531044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104690Jy sigma=0.000640 ! Fit after self-cal, rms=0.104686Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.71337e-06 Jy ! Component: 100 - total flux cleaned = -4.24751e-06 Jy ! Component: 150 - total flux cleaned = 2.46458e-05 Jy ! Component: 200 - total flux cleaned = 2.4888e-05 Jy ! Total flux subtracted in 200 components = 2.4888e-05 Jy ! Clean residual min=-0.008842 max=0.008095 Jy/beam ! Clean residual mean=0.000010 rms=0.002104 Jy/beam ! Combined flux in latest and established models = 0.531069 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 51 components and 0.531069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104665Jy sigma=0.000640 ! Fit after self-cal, rms=0.104662Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104662Jy sigma=0.000640 ! Fit after self-cal, rms=0.104677Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.731 mas, bmaj=16.57 mas, bpa=3.416 degrees ! Estimated noise=5534.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000956569 Jy ! Component: 100 - total flux cleaned = 0.00099424 Jy ! Component: 150 - total flux cleaned = 0.000989961 Jy ! Component: 200 - total flux cleaned = 0.00103819 Jy ! Total flux subtracted in 200 components = 0.00103819 Jy ! Clean residual min=-0.008962 max=0.010231 Jy/beam ! Clean residual mean=0.000024 rms=0.002980 Jy/beam ! Combined flux in latest and established models = 0.532107 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 0.532107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104696Jy sigma=0.000640 ! Fit after self-cal, rms=0.104682Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.68097e-06 Jy ! Component: 100 - total flux cleaned = -4.07875e-06 Jy ! Component: 150 - total flux cleaned = 1.93454e-05 Jy ! Component: 200 - total flux cleaned = 6.06443e-05 Jy ! Total flux subtracted in 200 components = 6.06443e-05 Jy ! Clean residual min=-0.008926 max=0.010188 Jy/beam ! Clean residual mean=0.000024 rms=0.002976 Jy/beam ! Combined flux in latest and established models = 0.532167 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 0.532167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104707Jy sigma=0.000641 ! Fit after self-cal, rms=0.104700Jy sigma=0.000641 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.669 mas, bmaj=7.096 mas, bpa=-2.445 degrees ! Estimated noise=3983.13 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.669 x 7.096 at -2.445 degrees (North through East) ! Clean map min=-0.0080987 max=0.48508 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.346 mas, bmaj=6.544 mas, bpa=-4.32 degrees ! Estimated noise=4534.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.376314 Jy ! Component: 100 - total flux cleaned = 0.460552 Jy ! Component: 150 - total flux cleaned = 0.489949 Jy ! Component: 200 - total flux cleaned = 0.505422 Jy ! Total flux subtracted in 200 components = 0.505422 Jy ! Clean residual min=-0.011547 max=0.009613 Jy/beam ! Clean residual mean=-0.000009 rms=0.002691 Jy/beam ! Combined flux in latest and established models = 0.505422 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.505422 Jy ! Inverting map and beam ! Estimated beam: bmin=2.669 mas, bmaj=7.096 mas, bpa=-2.445 degrees ! Estimated noise=3983.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124231 Jy ! Component: 100 - total flux cleaned = 0.0186694 Jy ! Component: 150 - total flux cleaned = 0.0219609 Jy ! Component: 200 - total flux cleaned = 0.0236637 Jy ! Total flux subtracted in 200 components = 0.0236637 Jy ! Clean residual min=-0.008965 max=0.008043 Jy/beam ! Clean residual mean=0.000005 rms=0.002157 Jy/beam ! Combined flux in latest and established models = 0.529086 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 39 components and 0.529086 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.731 mas, bmaj=16.57 mas, bpa=3.416 degrees ! Estimated noise=5534.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022599 Jy ! Component: 100 - total flux cleaned = 0.00238252 Jy ! Component: 150 - total flux cleaned = 0.00253841 Jy ! Component: 200 - total flux cleaned = 0.00262664 Jy ! Total flux subtracted in 200 components = 0.00262664 Jy ! Clean residual min=-0.009017 max=0.010577 Jy/beam ! Clean residual mean=0.000021 rms=0.003011 Jy/beam ! Combined flux in latest and established models = 0.531713 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000116496 Jy ! Component: 100 - total flux cleaned = 0.000185056 Jy ! Component: 150 - total flux cleaned = 0.000245416 Jy ! Component: 200 - total flux cleaned = 0.000300239 Jy ! Total flux subtracted in 200 components = 0.000300239 Jy ! Clean residual min=-0.008901 max=0.010449 Jy/beam ! Clean residual mean=0.000023 rms=0.002994 Jy/beam ! Combined flux in latest and established models = 0.532013 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 56 components and 0.532013 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.669 mas, bmaj=7.096 mas, bpa=-2.445 degrees ! Estimated noise=3983.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000517894 Jy ! Component: 100 - total flux cleaned = -0.000515907 Jy ! Component: 150 - total flux cleaned = -0.000560509 Jy ! Component: 200 - total flux cleaned = -0.000597117 Jy ! Total flux subtracted in 200 components = -0.000597117 Jy ! Clean residual min=-0.008771 max=0.008083 Jy/beam ! Clean residual mean=0.000009 rms=0.002121 Jy/beam ! Combined flux in latest and established models = 0.531416 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 68 components and 0.531416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104721Jy sigma=0.000641 ! Fit after self-cal, rms=0.104708Jy sigma=0.000641 wmodel J0927-2034_S_2017_01_21_pus_map.mod ! Writing 68 model components to file: J0927-2034_S_2017_01_21_pus_map.mod wobs J0927-2034_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0927-2034_S_2017_01_21_pus_uvs.fits wwins J0927-2034_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J0927-2034_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000668993 Jy ! Component: 100 - total flux cleaned = -0.00121487 Jy ! Component: 150 - total flux cleaned = -0.001458 Jy ! Component: 200 - total flux cleaned = -0.00193157 Jy ! Component: 250 - total flux cleaned = -0.00237978 Jy ! Component: 300 - total flux cleaned = -0.00280567 Jy ! Component: 350 - total flux cleaned = -0.0026066 Jy ! Component: 400 - total flux cleaned = -0.0024126 Jy ! Component: 450 - total flux cleaned = -0.00213452 Jy ! Component: 500 - total flux cleaned = -0.0019552 Jy ! Component: 550 - total flux cleaned = -0.00161183 Jy ! Component: 600 - total flux cleaned = -0.00136329 Jy ! Component: 650 - total flux cleaned = -0.00112121 Jy ! Component: 700 - total flux cleaned = -0.000729643 Jy ! Component: 750 - total flux cleaned = -0.000274234 Jy ! Component: 800 - total flux cleaned = 0.000240303 Jy ! Component: 850 - total flux cleaned = 0.000383014 Jy ! Component: 900 - total flux cleaned = 0.000732282 Jy ! Component: 950 - total flux cleaned = 0.00100471 Jy ! Component: 1000 - total flux cleaned = 0.00133584 Jy ! Component: 1050 - total flux cleaned = 0.0014643 Jy ! Component: 1100 - total flux cleaned = 0.00165389 Jy ! Component: 1150 - total flux cleaned = 0.00190006 Jy ! Component: 1200 - total flux cleaned = 0.00213894 Jy ! Component: 1250 - total flux cleaned = 0.00237273 Jy ! Component: 1300 - total flux cleaned = 0.00271883 Jy ! Component: 1350 - total flux cleaned = 0.00277478 Jy ! Component: 1400 - total flux cleaned = 0.00282996 Jy ! Component: 1450 - total flux cleaned = 0.00266641 Jy ! Component: 1500 - total flux cleaned = 0.00277469 Jy ! Component: 1550 - total flux cleaned = 0.00282792 Jy ! Component: 1600 - total flux cleaned = 0.00277604 Jy ! Component: 1650 - total flux cleaned = 0.00287846 Jy ! Component: 1700 - total flux cleaned = 0.00282708 Jy ! Component: 1750 - total flux cleaned = 0.002727 Jy ! Component: 1800 - total flux cleaned = 0.00277613 Jy ! Component: 1850 - total flux cleaned = 0.00287341 Jy ! Component: 1900 - total flux cleaned = 0.0027772 Jy ! Component: 1950 - total flux cleaned = 0.00282441 Jy ! Component: 2000 - total flux cleaned = 0.00277687 Jy ! Component: 2050 - total flux cleaned = 0.00277692 Jy ! Component: 2100 - total flux cleaned = 0.00273064 Jy ! Component: 2150 - total flux cleaned = 0.00263993 Jy ! Component: 2200 - total flux cleaned = 0.00250482 Jy ! Component: 2250 - total flux cleaned = 0.00254982 Jy ! Component: 2300 - total flux cleaned = 0.00250554 Jy ! Component: 2350 - total flux cleaned = 0.00250542 Jy ! Component: 2400 - total flux cleaned = 0.00246176 Jy ! Component: 2450 - total flux cleaned = 0.00246191 Jy ! Component: 2500 - total flux cleaned = 0.00259099 Jy ! Component: 2550 - total flux cleaned = 0.00259096 Jy ! Component: 2600 - total flux cleaned = 0.00271892 Jy ! Component: 2650 - total flux cleaned = 0.00284633 Jy ! Component: 2700 - total flux cleaned = 0.00297313 Jy ! Component: 2750 - total flux cleaned = 0.00309915 Jy ! Component: 2800 - total flux cleaned = 0.00318306 Jy ! Component: 2850 - total flux cleaned = 0.00339141 Jy ! Component: 2900 - total flux cleaned = 0.00330816 Jy ! Component: 2950 - total flux cleaned = 0.00347397 Jy ! Component: 3000 - total flux cleaned = 0.00351519 Jy ! Component: 3050 - total flux cleaned = 0.00355644 Jy ! Component: 3100 - total flux cleaned = 0.00359746 Jy ! Component: 3150 - total flux cleaned = 0.00367962 Jy ! Component: 3200 - total flux cleaned = 0.00367983 Jy ! Component: 3250 - total flux cleaned = 0.00380225 Jy ! Component: 3300 - total flux cleaned = 0.00388398 Jy ! Component: 3350 - total flux cleaned = 0.0040064 Jy ! Component: 3400 - total flux cleaned = 0.00416975 Jy ! Component: 3450 - total flux cleaned = 0.00425145 Jy ! Component: 3500 - total flux cleaned = 0.00433317 Jy ! Component: 3550 - total flux cleaned = 0.0045782 Jy ! Component: 3600 - total flux cleaned = 0.00474186 Jy ! Component: 3650 - total flux cleaned = 0.00474152 Jy ! Component: 3700 - total flux cleaned = 0.00486505 Jy ! Component: 3750 - total flux cleaned = 0.00486491 Jy ! Component: 3800 - total flux cleaned = 0.00494757 Jy ! Component: 3850 - total flux cleaned = 0.00498909 Jy ! Component: 3900 - total flux cleaned = 0.00503055 Jy ! Component: 3950 - total flux cleaned = 0.00515538 Jy ! Component: 4000 - total flux cleaned = 0.00515502 Jy ! Component: 4050 - total flux cleaned = 0.00523864 Jy ! Total flux subtracted in 4096 components = 0.00523855 Jy ! Clean residual min=-0.002511 max=0.002269 Jy/beam ! Clean residual mean=-0.000008 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.536654 Jy keep ! Adding 228 model components to the UV plane model. ! The established model now contains 296 components and 0.536654 Jy ![Exited script file: muppet] wmap "J0927-2034_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.669 x 7.096 at -2.445 degrees (North through East) ! Clean map min=-0.0045374 max=0.48557 Jy/beam ! Writing clean map to FITS file: J0927-2034_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.485571 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00069768 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.431047 0.431047 0.862095 1.72419 3.44838 6.89676 13.7935 27.587 55.1741 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.485 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.669 x 7.096 at -2.445 degrees (North through East) ! Clean map min=-0.0045374 max=0.48557 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0927-2034_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:51:21 2019