! Started logfile: J0925+1658_S_2017_07_16_pus_uvs.log on Thu May 9 11:05:41 2019 obs J0925+1658_S_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0925+1658_S_2017_07_16_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.720525 visibilities/baseline/integration-bin. ! Found source: J0925+1658 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 815 lines of history. ! ! Reading 18676 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0925+1658_S_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 211 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 294 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 294 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 979 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.948758Jy sigma=0.008712 ! Fit after self-cal, rms=0.931767Jy sigma=0.008579 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.628 mas, bmaj=5.986 mas, bpa=-2.608 degrees ! Estimated noise=965.204 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0534643 Jy ! Component: 100 - total flux cleaned = 0.0656751 Jy ! Total flux subtracted in 100 components = 0.0656751 Jy ! Clean residual min=-0.003448 max=0.004680 Jy/beam ! Clean residual mean=-0.000005 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.0656751 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0656751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077420Jy sigma=0.000672 ! Fit after self-cal, rms=0.077382Jy sigma=0.000672 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.045 mas, bmaj=7.067 mas, bpa=-2.448 degrees ! Estimated noise=671.078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00668796 Jy ! Component: 100 - total flux cleaned = 0.00990304 Jy ! Component: 150 - total flux cleaned = 0.0116674 Jy ! Component: 200 - total flux cleaned = 0.0127481 Jy ! Total flux subtracted in 200 components = 0.0127481 Jy ! Clean residual min=-0.001897 max=0.002279 Jy/beam ! Clean residual mean=-0.000003 rms=0.000493 Jy/beam ! Combined flux in latest and established models = 0.0784231 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 30 components and 0.0784231 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076819Jy sigma=0.000667 ! Fit after self-cal, rms=0.076815Jy sigma=0.000667 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.00* HN 1.00 KP 1.02 ! LA 1.02 MK 1.02 NL 0.91 OV 1.04 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00* HN 1.05 KP 1.03 ! LA 1.00 MK 1.00 NL 1.02 OV 1.05 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.05 KP 0.99 ! LA 0.97 MK 1.09 NL 1.02 OV 0.96 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.85 KP 1.00* ! LA 0.88 MK 0.82 NL 1.00* OV 1.00* ! PT 1.11 SC 1.00* ! ! ! Fit before self-cal, rms=0.076815Jy sigma=0.000667 ! Fit after self-cal, rms=0.075651Jy sigma=0.000666 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=7.093 mas, bpa=-2.261 degrees ! Estimated noise=672.7 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000439386 Jy ! Component: 100 - total flux cleaned = 0.000568776 Jy ! Component: 150 - total flux cleaned = 0.00063174 Jy ! Component: 200 - total flux cleaned = 0.000689531 Jy ! Total flux subtracted in 200 components = 0.000689531 Jy ! Clean residual min=-0.001715 max=0.001670 Jy/beam ! Clean residual mean=-0.000004 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0791127 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 35 components and 0.0791127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075642Jy sigma=0.000666 ! Fit after self-cal, rms=0.075628Jy sigma=0.000666 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075628Jy sigma=0.000666 ! Fit after self-cal, rms=0.075027Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=7.114 mas, bpa=-2.27 degrees ! Estimated noise=673.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000238144 Jy ! Component: 100 - total flux cleaned = 0.000297225 Jy ! Component: 150 - total flux cleaned = 0.000350186 Jy ! Component: 200 - total flux cleaned = 0.000370054 Jy ! Total flux subtracted in 200 components = 0.000370054 Jy ! Clean residual min=-0.001541 max=0.001513 Jy/beam ! Clean residual mean=-0.000001 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0794827 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.0794827 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075024Jy sigma=0.000664 ! Fit after self-cal, rms=0.075024Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.12115e-05 Jy ! Component: 100 - total flux cleaned = 7.07821e-05 Jy ! Component: 150 - total flux cleaned = 8.03719e-05 Jy ! Component: 200 - total flux cleaned = 8.95636e-05 Jy ! Total flux subtracted in 200 components = 8.95636e-05 Jy ! Clean residual min=-0.001559 max=0.001508 Jy/beam ! Clean residual mean=-0.000001 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.0795723 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.0795723 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075022Jy sigma=0.000664 ! Fit after self-cal, rms=0.075022Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075022Jy sigma=0.000664 ! Fit after self-cal, rms=0.075100Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.066 mas, bmaj=7.109 mas, bpa=-2.17 degrees ! Estimated noise=672.239 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.9745e-05 Jy ! Component: 100 - total flux cleaned = 0.000131575 Jy ! Component: 150 - total flux cleaned = 0.000186704 Jy ! Component: 200 - total flux cleaned = 0.000229337 Jy ! Total flux subtracted in 200 components = 0.000229337 Jy ! Clean residual min=-0.001546 max=0.001494 Jy/beam ! Clean residual mean=-0.000001 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.0798016 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 44 components and 0.0798016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075098Jy sigma=0.000664 ! Fit after self-cal, rms=0.075108Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.55042e-05 Jy ! Component: 100 - total flux cleaned = 4.19937e-05 Jy ! Component: 150 - total flux cleaned = 5.7376e-05 Jy ! Component: 200 - total flux cleaned = 6.48991e-05 Jy ! Total flux subtracted in 200 components = 6.48991e-05 Jy ! Clean residual min=-0.001536 max=0.001495 Jy/beam ! Clean residual mean=-0.000001 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.0798665 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.0798665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075107Jy sigma=0.000664 ! Fit after self-cal, rms=0.075107Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075107Jy sigma=0.000664 ! Fit after self-cal, rms=0.075034Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.604 mas, bmaj=11.2 mas, bpa=-7.703 degrees ! Estimated noise=873.267 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000438374 Jy ! Component: 100 - total flux cleaned = 0.000426318 Jy ! Component: 150 - total flux cleaned = 0.000416454 Jy ! Component: 200 - total flux cleaned = 0.000409126 Jy ! Total flux subtracted in 200 components = 0.000409126 Jy ! Clean residual min=-0.001921 max=0.002075 Jy/beam ! Clean residual mean=-0.000002 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.0802757 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 48 components and 0.0802757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075037Jy sigma=0.000664 ! Fit after self-cal, rms=0.075034Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.72864e-06 Jy ! Component: 100 - total flux cleaned = -9.90181e-06 Jy ! Component: 150 - total flux cleaned = -1.8607e-05 Jy ! Component: 200 - total flux cleaned = -1.8716e-05 Jy ! Total flux subtracted in 200 components = -1.8716e-05 Jy ! Clean residual min=-0.001918 max=0.002069 Jy/beam ! Clean residual mean=-0.000002 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.0802569 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 50 components and 0.0802569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075037Jy sigma=0.000664 ! Fit after self-cal, rms=0.075035Jy sigma=0.000664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=7.102 mas, bpa=-2.101 degrees ! Estimated noise=671.52 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.063 x 7.102 at -2.101 degrees (North through East) ! Clean map min=-0.0014798 max=0.070155 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.633 mas, bmaj=5.991 mas, bpa=-2.653 degrees ! Estimated noise=981.063 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0528069 Jy ! Component: 100 - total flux cleaned = 0.0652459 Jy ! Component: 150 - total flux cleaned = 0.070724 Jy ! Component: 200 - total flux cleaned = 0.0736008 Jy ! Total flux subtracted in 200 components = 0.0736008 Jy ! Clean residual min=-0.002300 max=0.002836 Jy/beam ! Clean residual mean=-0.000002 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.0736008 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0736008 Jy ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=7.102 mas, bpa=-2.101 degrees ! Estimated noise=671.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00305755 Jy ! Component: 100 - total flux cleaned = 0.00474503 Jy ! Component: 150 - total flux cleaned = 0.00584012 Jy ! Component: 200 - total flux cleaned = 0.00659956 Jy ! Total flux subtracted in 200 components = 0.00659956 Jy ! Clean residual min=-0.001536 max=0.001410 Jy/beam ! Clean residual mean=-0.000001 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0802003 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 33 components and 0.0802003 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.604 mas, bmaj=11.2 mas, bpa=-7.703 degrees ! Estimated noise=873.267 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000708449 Jy ! Component: 100 - total flux cleaned = 0.000789559 Jy ! Component: 150 - total flux cleaned = 0.000801246 Jy ! Component: 200 - total flux cleaned = 0.000811783 Jy ! Total flux subtracted in 200 components = 0.000811783 Jy ! Clean residual min=-0.001858 max=0.002135 Jy/beam ! Clean residual mean=-0.000002 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.0810121 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.58777e-06 Jy ! Component: 100 - total flux cleaned = 2.68605e-05 Jy ! Component: 150 - total flux cleaned = 3.43278e-05 Jy ! Component: 200 - total flux cleaned = 4.74218e-05 Jy ! Total flux subtracted in 200 components = 4.74218e-05 Jy ! Clean residual min=-0.001833 max=0.002134 Jy/beam ! Clean residual mean=-0.000002 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.0810595 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 58 components and 0.0810595 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.063 mas, bmaj=7.102 mas, bpa=-2.101 degrees ! Estimated noise=671.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.77176e-05 Jy ! Component: 100 - total flux cleaned = 8.70623e-05 Jy ! Component: 150 - total flux cleaned = 0.000139157 Jy ! Component: 200 - total flux cleaned = 0.000162194 Jy ! Total flux subtracted in 200 components = 0.000162194 Jy ! Clean residual min=-0.001433 max=0.001467 Jy/beam ! Clean residual mean=-0.000001 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.0812217 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 72 components and 0.0812217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075009Jy sigma=0.000664 ! Fit after self-cal, rms=0.074999Jy sigma=0.000664 wmodel J0925+1658_S_2017_07_16_pus_map.mod ! Writing 72 model components to file: J0925+1658_S_2017_07_16_pus_map.mod wobs J0925+1658_S_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0925+1658_S_2017_07_16_pus_uvs.fits wwins J0925+1658_S_2017_07_16_pus_map.win ! wwins: Wrote 2 windows to J0925+1658_S_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000190066 Jy ! Component: 100 - total flux cleaned = 0.00041817 Jy ! Component: 150 - total flux cleaned = 0.000634055 Jy ! Component: 200 - total flux cleaned = 0.000748611 Jy ! Component: 250 - total flux cleaned = 0.000858614 Jy ! Component: 300 - total flux cleaned = 0.000901166 Jy ! Component: 350 - total flux cleaned = 0.000963654 Jy ! Component: 400 - total flux cleaned = 0.00100442 Jy ! Component: 450 - total flux cleaned = 0.00104404 Jy ! Component: 500 - total flux cleaned = 0.00110219 Jy ! Component: 550 - total flux cleaned = 0.00110193 Jy ! Component: 600 - total flux cleaned = 0.00115829 Jy ! Component: 650 - total flux cleaned = 0.00119536 Jy ! Component: 700 - total flux cleaned = 0.001232 Jy ! Component: 750 - total flux cleaned = 0.00124992 Jy ! Component: 800 - total flux cleaned = 0.00124984 Jy ! Component: 850 - total flux cleaned = 0.00121533 Jy ! Component: 900 - total flux cleaned = 0.00121546 Jy ! Component: 950 - total flux cleaned = 0.00118212 Jy ! Component: 1000 - total flux cleaned = 0.00123137 Jy ! Component: 1050 - total flux cleaned = 0.00124771 Jy ! Component: 1100 - total flux cleaned = 0.00124775 Jy ! Component: 1150 - total flux cleaned = 0.00124802 Jy ! Component: 1200 - total flux cleaned = 0.00123292 Jy ! Component: 1250 - total flux cleaned = 0.00129461 Jy ! Component: 1300 - total flux cleaned = 0.00129491 Jy ! Component: 1350 - total flux cleaned = 0.00134007 Jy ! Component: 1400 - total flux cleaned = 0.0013845 Jy ! Component: 1450 - total flux cleaned = 0.00142825 Jy ! Component: 1500 - total flux cleaned = 0.00139906 Jy ! Component: 1550 - total flux cleaned = 0.0014277 Jy ! Component: 1600 - total flux cleaned = 0.00147008 Jy ! Component: 1650 - total flux cleaned = 0.00151189 Jy ! Component: 1700 - total flux cleaned = 0.00149777 Jy ! Component: 1750 - total flux cleaned = 0.00152504 Jy ! Component: 1800 - total flux cleaned = 0.00151138 Jy ! Component: 1850 - total flux cleaned = 0.00152458 Jy ! Component: 1900 - total flux cleaned = 0.00155092 Jy ! Component: 1950 - total flux cleaned = 0.00151173 Jy ! Component: 2000 - total flux cleaned = 0.00153786 Jy ! Component: 2050 - total flux cleaned = 0.00152494 Jy ! Component: 2100 - total flux cleaned = 0.00158849 Jy ! Component: 2150 - total flux cleaned = 0.00150026 Jy ! Component: 2200 - total flux cleaned = 0.00152525 Jy ! Component: 2250 - total flux cleaned = 0.00148812 Jy ! Component: 2300 - total flux cleaned = 0.00147605 Jy ! Component: 2350 - total flux cleaned = 0.00148821 Jy ! Component: 2400 - total flux cleaned = 0.00146424 Jy ! Component: 2450 - total flux cleaned = 0.00148802 Jy ! Component: 2500 - total flux cleaned = 0.00145271 Jy ! Component: 2550 - total flux cleaned = 0.00148771 Jy ! Component: 2600 - total flux cleaned = 0.00137199 Jy ! Component: 2650 - total flux cleaned = 0.00139495 Jy ! Component: 2700 - total flux cleaned = 0.00140638 Jy ! Component: 2750 - total flux cleaned = 0.00141772 Jy ! Component: 2800 - total flux cleaned = 0.00140654 Jy ! Component: 2850 - total flux cleaned = 0.00140667 Jy ! Component: 2900 - total flux cleaned = 0.00143969 Jy ! Component: 2950 - total flux cleaned = 0.0014179 Jy ! Component: 3000 - total flux cleaned = 0.00141786 Jy ! Component: 3050 - total flux cleaned = 0.00144994 Jy ! Component: 3100 - total flux cleaned = 0.00143913 Jy ! Component: 3150 - total flux cleaned = 0.00144971 Jy ! Component: 3200 - total flux cleaned = 0.00143926 Jy ! Component: 3250 - total flux cleaned = 0.00144969 Jy ! Component: 3300 - total flux cleaned = 0.00147031 Jy ! Component: 3350 - total flux cleaned = 0.00148059 Jy ! Component: 3400 - total flux cleaned = 0.0014704 Jy ! Component: 3450 - total flux cleaned = 0.00149068 Jy ! Component: 3500 - total flux cleaned = 0.00152057 Jy ! Component: 3550 - total flux cleaned = 0.00150059 Jy ! Component: 3600 - total flux cleaned = 0.0015204 Jy ! Component: 3650 - total flux cleaned = 0.00153011 Jy ! Component: 3700 - total flux cleaned = 0.00156902 Jy ! Component: 3750 - total flux cleaned = 0.00153044 Jy ! Component: 3800 - total flux cleaned = 0.00154 Jy ! Component: 3850 - total flux cleaned = 0.00154949 Jy ! Component: 3900 - total flux cleaned = 0.00154002 Jy ! Component: 3950 - total flux cleaned = 0.00154005 Jy ! Component: 4000 - total flux cleaned = 0.00154933 Jy ! Component: 4050 - total flux cleaned = 0.00155872 Jy ! Total flux subtracted in 4096 components = 0.0015771 Jy ! Clean residual min=-0.000656 max=0.000567 Jy/beam ! Clean residual mean=-0.000002 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.0827988 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 376 components and 0.0827988 Jy ![Exited script file: muppet] wmap "J0925+1658_S_2017_07_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.063 x 7.102 at -2.101 degrees (North through East) ! Clean map min=-0.00085703 max=0.070369 Jy/beam ! Writing clean map to FITS file: J0925+1658_S_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0703686 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000165643 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.706178 0.706178 1.41236 2.82471 5.64943 11.2989 22.5977 45.1954 90.3908 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.07 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.063 x 7.102 at -2.101 degrees (North through East) ! Clean map min=-0.00085703 max=0.070369 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0925+1658_S_2017_07_16_pus_uvs.log closed on Thu May 9 11:05:46 2019