! Started logfile: J0923+3849_S_2017_06_15_pus_uvs.log on Tue May 7 15:15:39 2019 obs J0923+3849_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0923+3849_S_2017_06_15_pus_uva.fits ! AN table 1: 17 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.202614 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0923+3849 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 620 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0923+3849_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 108 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 89 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.746826Jy sigma=0.006114 ! Fit after self-cal, rms=0.706188Jy sigma=0.005875 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.977 mas, bmaj=7.877 mas, bpa=-32.98 degrees ! Estimated noise=6546.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.233456 Jy ! Component: 100 - total flux cleaned = 0.289748 Jy ! Total flux subtracted in 100 components = 0.289748 Jy ! Clean residual min=-0.022328 max=0.024415 Jy/beam ! Clean residual mean=0.000024 rms=0.009260 Jy/beam ! Combined flux in latest and established models = 0.289748 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.289748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088061Jy sigma=0.000707 ! Fit after self-cal, rms=0.087936Jy sigma=0.000706 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.085 mas, bmaj=7.38 mas, bpa=-32.25 degrees ! Estimated noise=4300.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0265412 Jy ! Component: 100 - total flux cleaned = 0.0322643 Jy ! Component: 150 - total flux cleaned = 0.0311311 Jy ! Component: 200 - total flux cleaned = 0.029819 Jy ! Total flux subtracted in 200 components = 0.029819 Jy ! Clean residual min=-0.006904 max=0.006790 Jy/beam ! Clean residual mean=0.000004 rms=0.002556 Jy/beam ! Combined flux in latest and established models = 0.319567 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 71 components and 0.319567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074510Jy sigma=0.000594 ! Fit after self-cal, rms=0.074418Jy sigma=0.000594 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.95 KP 1.00* ! LA 1.00* MK 1.03 NL 0.94 OV 1.00* ! PT 1.00* SC 1.01 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.02 KP 1.00* ! LA 1.00* MK 1.00 NL 0.99 OV 1.00* ! PT 1.00* SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 1.00 KP 1.00* ! LA 1.00* MK 1.02 NL 1.00 OV 1.00* ! PT 1.00* SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.074418Jy sigma=0.000594 ! Fit after self-cal, rms=0.070312Jy sigma=0.000574 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.104 mas, bmaj=7.418 mas, bpa=-32.5 degrees ! Estimated noise=4280.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00140648 Jy ! Component: 100 - total flux cleaned = -0.0015077 Jy ! Component: 150 - total flux cleaned = -0.00239881 Jy ! Component: 200 - total flux cleaned = -0.00280398 Jy ! Total flux subtracted in 200 components = -0.00280398 Jy ! Clean residual min=-0.001603 max=0.001597 Jy/beam ! Clean residual mean=-0.000000 rms=0.000481 Jy/beam ! Combined flux in latest and established models = 0.316763 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 111 components and 0.316763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069826Jy sigma=0.000570 ! Fit after self-cal, rms=0.069807Jy sigma=0.000570 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069807Jy sigma=0.000570 ! Fit after self-cal, rms=0.069820Jy sigma=0.000570 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.104 mas, bmaj=7.416 mas, bpa=-32.48 degrees ! Estimated noise=4283.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00047472 Jy ! Component: 100 - total flux cleaned = -0.000990007 Jy ! Component: 150 - total flux cleaned = -0.000651641 Jy ! Component: 200 - total flux cleaned = -0.000494493 Jy ! Total flux subtracted in 200 components = -0.000494493 Jy ! Clean residual min=-0.000842 max=0.000844 Jy/beam ! Clean residual mean=0.000000 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.316268 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 156 components and 0.316268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069720Jy sigma=0.000569 ! Fit after self-cal, rms=0.069713Jy sigma=0.000569 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.53969e-05 Jy ! Component: 100 - total flux cleaned = 0.00030413 Jy ! Component: 150 - total flux cleaned = 0.00043311 Jy ! Component: 200 - total flux cleaned = 0.000564496 Jy ! Total flux subtracted in 200 components = 0.000564496 Jy ! Clean residual min=-0.000741 max=0.000746 Jy/beam ! Clean residual mean=0.000000 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.316833 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 185 components and 0.316832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069672Jy sigma=0.000568 ! Fit after self-cal, rms=0.069671Jy sigma=0.000568 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069671Jy sigma=0.000568 ! Fit after self-cal, rms=0.069719Jy sigma=0.000568 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.104 mas, bmaj=7.419 mas, bpa=-32.49 degrees ! Estimated noise=4285.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.46104e-05 Jy ! Component: 100 - total flux cleaned = 0.000361899 Jy ! Component: 150 - total flux cleaned = 0.000360051 Jy ! Component: 200 - total flux cleaned = 0.000272564 Jy ! Total flux subtracted in 200 components = 0.000272564 Jy ! Clean residual min=-0.000773 max=0.000793 Jy/beam ! Clean residual mean=0.000000 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.317105 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 205 components and 0.317105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069685Jy sigma=0.000568 ! Fit after self-cal, rms=0.069685Jy sigma=0.000568 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.33532e-05 Jy ! Component: 100 - total flux cleaned = -7.2316e-05 Jy ! Component: 150 - total flux cleaned = -0.000106926 Jy ! Component: 200 - total flux cleaned = -0.000146309 Jy ! Total flux subtracted in 200 components = -0.000146309 Jy ! Clean residual min=-0.000677 max=0.000692 Jy/beam ! Clean residual mean=0.000000 rms=0.000176 Jy/beam ! Combined flux in latest and established models = 0.316959 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 229 components and 0.316959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069659Jy sigma=0.000568 ! Fit after self-cal, rms=0.069658Jy sigma=0.000568 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069658Jy sigma=0.000568 ! Fit after self-cal, rms=0.069713Jy sigma=0.000568 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.687 mas, bmaj=8.864 mas, bpa=-2.178 degrees ! Estimated noise=6324.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305466 Jy ! Component: 100 - total flux cleaned = 0.000238894 Jy ! Component: 150 - total flux cleaned = -0.000125526 Jy ! Component: 200 - total flux cleaned = -0.00037199 Jy ! Total flux subtracted in 200 components = -0.00037199 Jy ! Clean residual min=-0.001067 max=0.001025 Jy/beam ! Clean residual mean=0.000000 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.316587 Jy selfcal ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 275 components and 0.316587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069710Jy sigma=0.000568 ! Fit after self-cal, rms=0.069710Jy sigma=0.000568 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000296871 Jy ! Component: 100 - total flux cleaned = -0.000270682 Jy ! Component: 150 - total flux cleaned = -0.000241286 Jy ! Component: 200 - total flux cleaned = -0.000246391 Jy ! Total flux subtracted in 200 components = -0.000246391 Jy ! Clean residual min=-0.000859 max=0.000876 Jy/beam ! Clean residual mean=0.000000 rms=0.000209 Jy/beam ! Combined flux in latest and established models = 0.31634 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 310 components and 0.31634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069709Jy sigma=0.000568 ! Fit after self-cal, rms=0.069706Jy sigma=0.000568 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.104 mas, bmaj=7.42 mas, bpa=-32.49 degrees ! Estimated noise=4287.8 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.104 x 7.42 at -32.49 degrees (North through East) ! Clean map min=-0.0059337 max=0.26076 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.998 mas, bmaj=7.897 mas, bpa=-33.01 degrees ! Estimated noise=6537.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.230331 Jy ! Component: 100 - total flux cleaned = 0.284937 Jy ! Component: 150 - total flux cleaned = 0.305561 Jy ! Component: 200 - total flux cleaned = 0.31374 Jy ! Total flux subtracted in 200 components = 0.31374 Jy ! Clean residual min=-0.009189 max=0.009191 Jy/beam ! Clean residual mean=0.000008 rms=0.003610 Jy/beam ! Combined flux in latest and established models = 0.31374 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.31374 Jy ! Inverting map and beam ! Estimated beam: bmin=2.104 mas, bmaj=7.42 mas, bpa=-32.49 degrees ! Estimated noise=4287.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00771497 Jy ! Component: 100 - total flux cleaned = 0.0107295 Jy ! Component: 150 - total flux cleaned = 0.010768 Jy ! Component: 200 - total flux cleaned = 0.00903995 Jy ! Total flux subtracted in 200 components = 0.00903995 Jy ! Clean residual min=-0.003200 max=0.003220 Jy/beam ! Clean residual mean=0.000001 rms=0.001166 Jy/beam ! Combined flux in latest and established models = 0.32278 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 91 components and 0.32278 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.687 mas, bmaj=8.864 mas, bpa=-2.178 degrees ! Estimated noise=6324.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204514 Jy ! Component: 100 - total flux cleaned = 0.0018984 Jy ! Component: 150 - total flux cleaned = 0.00127749 Jy ! Component: 200 - total flux cleaned = 0.000423639 Jy ! Total flux subtracted in 200 components = 0.000423639 Jy ! Clean residual min=-0.003128 max=0.003150 Jy/beam ! Clean residual mean=0.000001 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.323203 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000387922 Jy ! Component: 100 - total flux cleaned = -0.000866903 Jy ! Component: 150 - total flux cleaned = -0.00118289 Jy ! Component: 200 - total flux cleaned = -0.00155933 Jy ! Total flux subtracted in 200 components = -0.00155933 Jy ! Clean residual min=-0.007057 max=0.007127 Jy/beam ! Clean residual mean=0.000002 rms=0.001629 Jy/beam ! Combined flux in latest and established models = 0.321644 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 140 components and 0.321644 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.104 mas, bmaj=7.42 mas, bpa=-32.49 degrees ! Estimated noise=4287.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000546172 Jy ! Component: 100 - total flux cleaned = -0.00101781 Jy ! Component: 150 - total flux cleaned = -0.00123412 Jy ! Component: 200 - total flux cleaned = -0.000979143 Jy ! Total flux subtracted in 200 components = -0.000979143 Jy ! Clean residual min=-0.004224 max=0.004049 Jy/beam ! Clean residual mean=0.000000 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.320665 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 163 components and 0.320665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070068Jy sigma=0.000571 ! Fit after self-cal, rms=0.070002Jy sigma=0.000570 wmodel J0923+3849_S_2017_06_15_pus_map.mod ! Writing 163 model components to file: J0923+3849_S_2017_06_15_pus_map.mod wobs J0923+3849_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0923+3849_S_2017_06_15_pus_uvs.fits wwins J0923+3849_S_2017_06_15_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0923+3849_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.104 x 7.42 at -32.49 degrees (North through East) ! Clean map min=-0.0048808 max=0.25746 Jy/beam ! Writing clean map to FITS file: J0923+3849_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.257463 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000817789 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.952902 0.952902 1.9058 3.81161 7.62321 15.2464 30.4929 60.9857 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.257 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.104 x 7.42 at -32.49 degrees (North through East) ! Clean map min=-0.0048808 max=0.25746 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0923+3849_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:15:42 2019