! Started logfile: J0923+2815_X_2017_01_21_pus_uvs.log on Sun May  5 15:28:05 2019
obs J0923+2815_X_2017_01_21_pus_uva.fits
! Reading UV FITS file: J0923+2815_X_2017_01_21_pus_uva.fits
! AN table 1: 114 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.81847 visibilities/baseline/integration-bin.
! Found source: J0923+2815
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 1086 lines of history.
! 
! Reading 40308 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0923+2815_X_2017_01_21_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 97 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.494615Jy  sigma=0.003656
! Fit after  self-cal, rms=0.445226Jy  sigma=0.003290
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.687 mas, bmaj=1.407 mas, bpa=-1.645 degrees
! Estimated noise=784.052 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.440035 Jy
! Component: 100  -  total flux cleaned = 0.546083 Jy
! Total flux subtracted in 100 components = 0.546083 Jy
! Clean residual min=-0.021497 max=0.044848 Jy/beam
! Clean residual mean=0.000018 rms=0.006583 Jy/beam
! Combined flux in latest and established models = 0.546083 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.546083 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.149619Jy  sigma=0.001096
! Fit after  self-cal, rms=0.149427Jy  sigma=0.001095
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0512602 Jy
! Component: 100  -  total flux cleaned = 0.0784986 Jy
! Total flux subtracted in 100 components = 0.0784986 Jy
! Clean residual min=-0.015568 max=0.038858 Jy/beam
! Clean residual mean=0.000013 rms=0.004470 Jy/beam
! Combined flux in latest and established models = 0.624581 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 9 components and 0.624581 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.128710Jy  sigma=0.000880
! Fit after  self-cal, rms=0.128313Jy  sigma=0.000878
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Added new window around map position (-1.2, 0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0330176 Jy
! Component: 100  -  total flux cleaned = 0.0488756 Jy
! Total flux subtracted in 100 components = 0.0488756 Jy
! Clean residual min=-0.012810 max=0.013368 Jy/beam
! Clean residual mean=0.000017 rms=0.003286 Jy/beam
! Combined flux in latest and established models = 0.673457 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 18 components and 0.673457 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.119425Jy  sigma=0.000792
! Fit after  self-cal, rms=0.118510Jy  sigma=0.000786
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.8235 mas, bmaj=1.64 mas, bpa=0.3686 degrees
! Estimated noise=477.157 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0154819 Jy
! Component: 100  -  total flux cleaned = 0.0248318 Jy
! Component: 150  -  total flux cleaned = 0.0297768 Jy
! Component: 200  -  total flux cleaned = 0.0304997 Jy
! Total flux subtracted in 200 components = 0.0304997 Jy
! Clean residual min=-0.011486 max=0.015068 Jy/beam
! Clean residual mean=0.000098 rms=0.003231 Jy/beam
! Combined flux in latest and established models = 0.703957 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 0.703957 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.116758Jy  sigma=0.000763
! Fit after  self-cal, rms=0.116566Jy  sigma=0.000762
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.96     HN        0.96     LA        1.10     
!   MK        0.97     NL        0.95     OV        0.96     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.96     HN        1.03     LA        1.11     
!   MK        0.96     NL        0.94     OV        0.96     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        1.01     LA        1.09     
!   MK        1.05     NL        0.95     OV        0.95     PT        0.96     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        0.97     LA        1.12     
!   MK        0.99     NL        0.94     OV        0.94     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.00     HN        0.98     LA        1.10     
!   MK        1.00     NL        0.94     OV        0.96     PT        0.98     
!   SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.00     HN        0.95     LA        1.11     
!   MK        0.99     NL        0.95     OV        1.00     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        0.96     LA        1.11     
!   MK        1.00     NL        0.94     OV        0.99     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.96     LA        1.10     
!   MK        0.98     NL        0.95     OV        1.00     PT        0.97     
!   SC        1.02     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        0.98     LA        1.14     
!   MK        0.96     NL        0.94     OV        1.00     PT        0.96     
!   SC        0.97     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        1.00     LA        1.12     
!   MK        1.06     NL        0.94     OV        0.98     PT        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     HN        1.01     LA        1.15     
!   MK        0.97     NL        0.94     OV        0.97     PT        0.97     
!   SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.03     HN        0.96     LA        1.14     
!   MK        0.97     NL        0.93     OV        0.98     PT        0.98     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.116566Jy  sigma=0.000762
! Fit after  self-cal, rms=0.110575Jy  sigma=0.000694
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.8226 mas, bmaj=1.64 mas, bpa=0.07384 degrees
! Estimated noise=473.16 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00673125 Jy
! Component: 100  -  total flux cleaned = 0.00735673 Jy
! Component: 150  -  total flux cleaned = 0.00725469 Jy
! Component: 200  -  total flux cleaned = 0.0069967 Jy
! Total flux subtracted in 200 components = 0.0069967 Jy
! Clean residual min=-0.005010 max=0.004853 Jy/beam
! Clean residual mean=-0.000002 rms=0.001226 Jy/beam
! Combined flux in latest and established models = 0.710953 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 41 components and 0.710953 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110050Jy  sigma=0.000689
! Fit after  self-cal, rms=0.110064Jy  sigma=0.000688
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110064Jy  sigma=0.000688
! Fit after  self-cal, rms=0.110685Jy  sigma=0.000671
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.8225 mas, bmaj=1.637 mas, bpa=0.1556 degrees
! Estimated noise=473.307 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0036764 Jy
! Component: 100  -  total flux cleaned = 0.00435635 Jy
! Component: 150  -  total flux cleaned = 0.00447513 Jy
! Component: 200  -  total flux cleaned = 0.00452409 Jy
! Total flux subtracted in 200 components = 0.00452409 Jy
! Clean residual min=-0.002252 max=0.002771 Jy/beam
! Clean residual mean=0.000004 rms=0.000599 Jy/beam
! Combined flux in latest and established models = 0.715477 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 47 components and 0.715477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110550Jy  sigma=0.000670
! Fit after  self-cal, rms=0.110574Jy  sigma=0.000670
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.2, 12.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00257276 Jy
! Component: 100  -  total flux cleaned = 0.00340077 Jy
! Component: 150  -  total flux cleaned = 0.00381751 Jy
! Component: 200  -  total flux cleaned = 0.00396955 Jy
! Total flux subtracted in 200 components = 0.00396955 Jy
! Clean residual min=-0.002228 max=0.002091 Jy/beam
! Clean residual mean=0.000003 rms=0.000530 Jy/beam
! Combined flux in latest and established models = 0.719447 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 66 components and 0.719447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110510Jy  sigma=0.000669
! Fit after  self-cal, rms=0.110507Jy  sigma=0.000669
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110507Jy  sigma=0.000669
! Fit after  self-cal, rms=0.111004Jy  sigma=0.000669
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.8217 mas, bmaj=1.636 mas, bpa=0.09949 degrees
! Estimated noise=473.346 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167228 Jy
! Component: 100  -  total flux cleaned = 0.00172477 Jy
! Component: 150  -  total flux cleaned = 0.00183745 Jy
! Component: 200  -  total flux cleaned = 0.0018725 Jy
! Total flux subtracted in 200 components = 0.0018725 Jy
! Clean residual min=-0.001838 max=0.001867 Jy/beam
! Clean residual mean=0.000003 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.721319 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 75 components and 0.721319 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110969Jy  sigma=0.000668
! Fit after  self-cal, rms=0.110975Jy  sigma=0.000668
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000185818 Jy
! Component: 100  -  total flux cleaned = 0.000188542 Jy
! Component: 150  -  total flux cleaned = 0.000158293 Jy
! Component: 200  -  total flux cleaned = 0.000158948 Jy
! Total flux subtracted in 200 components = 0.000158948 Jy
! Clean residual min=-0.001848 max=0.001757 Jy/beam
! Clean residual mean=0.000004 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.721478 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 80 components and 0.721478 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110957Jy  sigma=0.000668
! Fit after  self-cal, rms=0.110957Jy  sigma=0.000668
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110957Jy  sigma=0.000668
! Fit after  self-cal, rms=0.111001Jy  sigma=0.000668
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=1.827 mas, bmaj=2.681 mas, bpa=-0.8816 degrees
! Estimated noise=628.358 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00122697 Jy
! Component: 100  -  total flux cleaned = 0.00102745 Jy
! Component: 150  -  total flux cleaned = 0.000870488 Jy
! Component: 200  -  total flux cleaned = 0.000757485 Jy
! Total flux subtracted in 200 components = 0.000757485 Jy
! Clean residual min=-0.001625 max=0.001524 Jy/beam
! Clean residual mean=0.000009 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.722236 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 88 components and 0.722236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110992Jy  sigma=0.000668
! Fit after  self-cal, rms=0.110991Jy  sigma=0.000668
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.09404e-05 Jy
! Component: 100  -  total flux cleaned = -2.59283e-05 Jy
! Component: 150  -  total flux cleaned = -5.79662e-05 Jy
! Component: 200  -  total flux cleaned = -8.71506e-05 Jy
! Total flux subtracted in 200 components = -8.71506e-05 Jy
! Clean residual min=-0.001552 max=0.001465 Jy/beam
! Clean residual mean=0.000010 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.722148 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 90 components and 0.722148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110990Jy  sigma=0.000668
! Fit after  self-cal, rms=0.110990Jy  sigma=0.000668
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.8212 mas, bmaj=1.637 mas, bpa=0.07344 degrees
! Estimated noise=473.44 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8212 x 1.637 at 0.07344 degrees (North through East)
! Clean map  min=-0.0014769  max=0.58075 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.110990Jy  sigma=0.000668
! Fit after  self-cal, rms=0.122677Jy  sigma=0.000595
! Inverting map and beam 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.8212 mas, bmaj=1.637 mas, bpa=0.05933 degrees
! Estimated noise=473.581 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000475432 Jy
! Component: 100  -  total flux cleaned = 0.000441484 Jy
! Component: 150  -  total flux cleaned = 0.000410471 Jy
! Component: 200  -  total flux cleaned = 0.000380418 Jy
! Total flux subtracted in 200 components = 0.000380418 Jy
! Clean residual min=-0.001605 max=0.001627 Jy/beam
! Clean residual mean=0.000002 rms=0.000412 Jy/beam
! Combined flux in latest and established models = 0.722529 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 93 components and 0.722529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.122657Jy  sigma=0.000595
! Fit after  self-cal, rms=0.122658Jy  sigma=0.000595
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.45617e-05 Jy
! Component: 100  -  total flux cleaned = -4.10473e-05 Jy
! Component: 150  -  total flux cleaned = -1.51598e-05 Jy
! Component: 200  -  total flux cleaned = 5.5802e-05 Jy
! Total flux subtracted in 200 components = 5.5802e-05 Jy
! Clean residual min=-0.001574 max=0.001566 Jy/beam
! Clean residual mean=0.000002 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.722585 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 97 components and 0.722585 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.122647Jy  sigma=0.000595
! Fit after  self-cal, rms=0.122647Jy  sigma=0.000595
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.122647Jy  sigma=0.000595
! Fit after  self-cal, rms=0.122742Jy  sigma=0.000595
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.6856 mas, bmaj=1.411 mas, bpa=-1.88 degrees
! Estimated noise=776.662 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.435238 Jy
! Component: 100  -  total flux cleaned = 0.54275 Jy
! Component: 150  -  total flux cleaned = 0.599711 Jy
! Component: 200  -  total flux cleaned = 0.636475 Jy
! Total flux subtracted in 200 components = 0.636475 Jy
! Clean residual min=-0.010024 max=0.019607 Jy/beam
! Clean residual mean=-0.000003 rms=0.002798 Jy/beam
! Combined flux in latest and established models = 0.636475 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.636475 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.8206 mas, bmaj=1.637 mas, bpa=0.03597 degrees
! Estimated noise=473.678 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.032673 Jy
! Component: 100  -  total flux cleaned = 0.0520035 Jy
! Component: 150  -  total flux cleaned = 0.0640811 Jy
! Component: 200  -  total flux cleaned = 0.0718318 Jy
! Total flux subtracted in 200 components = 0.0718318 Jy
! Clean residual min=-0.002676 max=0.004362 Jy/beam
! Clean residual mean=-0.000018 rms=0.000808 Jy/beam
! Combined flux in latest and established models = 0.708307 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 28 components and 0.708307 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Added new window around map position (-2, 0.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00538647 Jy
! Component: 100  -  total flux cleaned = 0.00932352 Jy
! Component: 150  -  total flux cleaned = 0.0122381 Jy
! Component: 200  -  total flux cleaned = 0.0136987 Jy
! Total flux subtracted in 200 components = 0.0136987 Jy
! Clean residual min=-0.002198 max=0.001680 Jy/beam
! Clean residual mean=0.000001 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.722006 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 44 components and 0.722006 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=1.826 mas, bmaj=2.682 mas, bpa=-0.8725 degrees
! Estimated noise=629.093 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171924 Jy
! Component: 100  -  total flux cleaned = 0.00190538 Jy
! Component: 150  -  total flux cleaned = 0.00182298 Jy
! Component: 200  -  total flux cleaned = 0.00174896 Jy
! Total flux subtracted in 200 components = 0.00174896 Jy
! Clean residual min=-0.001493 max=0.001385 Jy/beam
! Clean residual mean=0.000007 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.723755 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.29592e-05 Jy
! Component: 100  -  total flux cleaned = -6.17789e-05 Jy
! Component: 150  -  total flux cleaned = -6.23159e-05 Jy
! Component: 200  -  total flux cleaned = -6.35452e-05 Jy
! Total flux subtracted in 200 components = -6.35452e-05 Jy
! Clean residual min=-0.001385 max=0.001346 Jy/beam
! Clean residual mean=0.000008 rms=0.000414 Jy/beam
! Combined flux in latest and established models = 0.723691 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 73 components and 0.723691 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! Estimated beam: bmin=0.8206 mas, bmaj=1.637 mas, bpa=0.03597 degrees
! Estimated noise=473.678 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000396178 Jy
! Component: 100  -  total flux cleaned = 0.00070721 Jy
! Component: 150  -  total flux cleaned = 0.000936665 Jy
! Component: 200  -  total flux cleaned = 0.00101991 Jy
! Total flux subtracted in 200 components = 0.00101991 Jy
! Clean residual min=-0.001656 max=0.001425 Jy/beam
! Clean residual mean=0.000004 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.724711 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 85 components and 0.724711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.122735Jy  sigma=0.000595
! Fit after  self-cal, rms=0.122731Jy  sigma=0.000595
wmodel J0923+2815_X_2017_01_21_pus_map.mod
! Writing 85 model components to file: J0923+2815_X_2017_01_21_pus_map.mod
wobs J0923+2815_X_2017_01_21_pus_uvs.fits
! Writing UV FITS file: J0923+2815_X_2017_01_21_pus_uvs.fits
wwins J0923+2815_X_2017_01_21_pus_map.win
! wwins: Wrote 4 windows to J0923+2815_X_2017_01_21_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000646825 Jy
! Component: 100  -  total flux cleaned = -0.000941554 Jy
! Component: 150  -  total flux cleaned = -0.00106766 Jy
! Component: 200  -  total flux cleaned = -0.00111502 Jy
! Component: 250  -  total flux cleaned = -0.00111402 Jy
! Component: 300  -  total flux cleaned = -0.000934569 Jy
! Component: 350  -  total flux cleaned = -0.000869336 Jy
! Component: 400  -  total flux cleaned = -0.000700211 Jy
! Component: 450  -  total flux cleaned = -0.000556589 Jy
! Component: 500  -  total flux cleaned = -0.000435661 Jy
! Component: 550  -  total flux cleaned = -0.000257444 Jy
! Component: 600  -  total flux cleaned = -4.45491e-05 Jy
! Component: 650  -  total flux cleaned = 0.000126125 Jy
! Component: 700  -  total flux cleaned = 0.000312368 Jy
! Component: 750  -  total flux cleaned = 0.00047671 Jy
! Component: 800  -  total flux cleaned = 0.000620357 Jy
! Component: 850  -  total flux cleaned = 0.000761595 Jy
! Component: 900  -  total flux cleaned = 0.000935115 Jy
! Component: 950  -  total flux cleaned = 0.00107162 Jy
! Component: 1000  -  total flux cleaned = 0.00113897 Jy
! Component: 1050  -  total flux cleaned = 0.00130487 Jy
! Component: 1100  -  total flux cleaned = 0.00141919 Jy
! Component: 1150  -  total flux cleaned = 0.00151559 Jy
! Component: 1200  -  total flux cleaned = 0.00159502 Jy
! Component: 1250  -  total flux cleaned = 0.00167341 Jy
! Component: 1300  -  total flux cleaned = 0.00173522 Jy
! Component: 1350  -  total flux cleaned = 0.00182662 Jy
! Component: 1400  -  total flux cleaned = 0.00191695 Jy
! Component: 1450  -  total flux cleaned = 0.00199092 Jy
! Component: 1500  -  total flux cleaned = 0.00204921 Jy
! Component: 1550  -  total flux cleaned = 0.0021215 Jy
! Component: 1600  -  total flux cleaned = 0.00217881 Jy
! Component: 1650  -  total flux cleaned = 0.00224978 Jy
! Component: 1700  -  total flux cleaned = 0.00234727 Jy
! Component: 1750  -  total flux cleaned = 0.00237487 Jy
! Component: 1800  -  total flux cleaned = 0.00238866 Jy
! Component: 1850  -  total flux cleaned = 0.00251029 Jy
! Component: 1900  -  total flux cleaned = 0.00252382 Jy
! Component: 1950  -  total flux cleaned = 0.0026031 Jy
! Component: 2000  -  total flux cleaned = 0.00260307 Jy
! Total flux subtracted in 2048 components = 0.00266783 Jy
! Clean residual min=-0.000671 max=0.000724 Jy/beam
! Clean residual mean=0.000001 rms=0.000240 Jy/beam
! Combined flux in latest and established models = 0.727379 Jy
keep
! Adding 159 model components to the UV plane model.
! The established model now contains 244 components and 0.727379 Jy
![Exited script file: muppet]
wmap "J0923+2815_X_2017_01_21_pus\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8206 x 1.637 at 0.03597 degrees (North through East)
! Clean map  min=-0.0011324  max=0.57999 Jy/beam
! Writing clean map to FITS file: J0923+2815_X_2017_01_21_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.579991 
invert
! Inverting map 
! Your choice of large map pixels excluded 0.179% of the data.
!  The x-axis pixel size should ideally be below 0.1989 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000239706 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.123988 0.123988 0.247976 0.495951 0.991903 1.98381 3.96761 7.93522 15.8704 31.7409 63.4818
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.579 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8206 x 1.637 at 0.03597 degrees (North through East)
! Clean map  min=-0.0011324  max=0.57999 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J0923+2815_X_2017_01_21_pus_uvs.log closed on Sun May  5 15:28:08 2019