! Started logfile: J0922-3959_X_2017_03_27_pus_uvs.log on Sat Apr 27 22:01:38 2019 obs J0922-3959_X_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0922-3959_X_2017_03_27_pus_uva.fits ! AN table 1: 40 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.517778 visibilities/baseline/integration-bin. ! Found source: J0922-3959 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1844 lines of history. ! ! Reading 11184 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0922-3959_X_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 114 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.408523Jy sigma=0.002293 ! Fit after self-cal, rms=0.402584Jy sigma=0.002254 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.5999 mas, bmaj=1.828 mas, bpa=-2.25 degrees ! Estimated noise=1881.64 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.51477 Jy ! Component: 100 - total flux cleaned = 0.705725 Jy ! Total flux subtracted in 100 components = 0.705725 Jy ! Clean residual min=-0.028713 max=0.077263 Jy/beam ! Clean residual mean=0.000090 rms=0.008318 Jy/beam ! Combined flux in latest and established models = 0.705725 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.705725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.256107Jy sigma=0.001527 ! Fit after self-cal, rms=0.255823Jy sigma=0.001525 ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0799434 Jy ! Component: 100 - total flux cleaned = 0.126178 Jy ! Total flux subtracted in 100 components = 0.126178 Jy ! Clean residual min=-0.015336 max=0.034110 Jy/beam ! Clean residual mean=0.000060 rms=0.005161 Jy/beam ! Combined flux in latest and established models = 0.831903 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 22 components and 0.831903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.202411Jy sigma=0.001079 ! Fit after self-cal, rms=0.202323Jy sigma=0.001078 ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (0.8, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0376269 Jy ! Component: 100 - total flux cleaned = 0.0634021 Jy ! Total flux subtracted in 100 components = 0.0634021 Jy ! Clean residual min=-0.014718 max=0.029619 Jy/beam ! Clean residual mean=0.000052 rms=0.004231 Jy/beam ! Combined flux in latest and established models = 0.895305 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 39 components and 0.895305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.185242Jy sigma=0.000935 ! Fit after self-cal, rms=0.184364Jy sigma=0.000929 ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (1.2, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0278797 Jy ! Component: 100 - total flux cleaned = 0.0469428 Jy ! Total flux subtracted in 100 components = 0.0469428 Jy ! Clean residual min=-0.015170 max=0.025382 Jy/beam ! Clean residual mean=0.000051 rms=0.003730 Jy/beam ! Combined flux in latest and established models = 0.942248 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.942248 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.174063Jy sigma=0.000855 ! Fit after self-cal, rms=0.173271Jy sigma=0.000848 ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.8002 mas, bmaj=2.348 mas, bpa=-0.07651 degrees ! Estimated noise=1111.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, -3.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0425811 Jy ! Component: 100 - total flux cleaned = 0.068104 Jy ! Component: 150 - total flux cleaned = 0.0840973 Jy ! Component: 200 - total flux cleaned = 0.0899372 Jy ! Total flux subtracted in 200 components = 0.0899372 Jy ! Clean residual min=-0.011697 max=0.013766 Jy/beam ! Clean residual mean=0.000203 rms=0.003020 Jy/beam ! Combined flux in latest and established models = 1.03219 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 85 components and 1.03219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.160665Jy sigma=0.000763 ! Fit after self-cal, rms=0.160438Jy sigma=0.000761 ! Inverting map ! Your choice of large map pixels excluded 0.17% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.71 KP 1.01 ! LA 1.00 MK 0.92 NL 1.03 OV 0.96 ! PT 0.97 SC 1.03 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.52 KP 1.02 ! LA 1.00 MK 0.95 NL 1.03 OV 0.97 ! PT 0.94 SC 1.02 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.68 KP 0.95 ! LA 1.04 MK 0.94 NL 1.02 OV 0.97 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.53 KP 0.98 ! LA 1.03 MK 0.96 NL 1.03 OV 0.97 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.38 KP 0.99 ! LA 1.02 MK 0.97 NL 1.01 OV 0.97 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.47 KP 0.97 ! LA 1.03 MK 0.93 NL 1.03 OV 0.97 ! PT 0.96 SC 1.01 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.54 KP 0.98 ! LA 1.04 MK 0.99 NL 1.02 OV 0.98 ! PT 0.96 SC 1.02 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 1.71 KP 0.99 ! LA 1.01 MK 0.96 NL 1.03 OV 0.97 ! PT 0.95 SC 1.02 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.46 KP 0.98 ! LA 1.03 MK 0.92 NL 1.00 OV 0.97 ! PT 0.96 SC 0.99 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.70 KP 0.90 ! LA 1.03 MK 0.93 NL 0.90 OV 1.05 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.74 KP 0.99 ! LA 1.10 MK 1.04 NL 0.98 OV 1.13 ! PT 1.10 SC 1.05 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.64 KP 1.01 ! LA 1.05 MK 0.97 NL 0.94 OV 1.07 ! PT 1.06 SC 1.00 ! ! ! Fit before self-cal, rms=0.160438Jy sigma=0.000761 ! Fit after self-cal, rms=0.164073Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.7968 mas, bmaj=2.331 mas, bpa=-0.4374 degrees ! Estimated noise=1109.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0041036 Jy ! Component: 100 - total flux cleaned = -0.005595 Jy ! Component: 150 - total flux cleaned = -0.0064481 Jy ! Component: 200 - total flux cleaned = -0.00700753 Jy ! Total flux subtracted in 200 components = -0.00700753 Jy ! Clean residual min=-0.005365 max=0.005593 Jy/beam ! Clean residual mean=0.000090 rms=0.001426 Jy/beam ! Combined flux in latest and established models = 1.02518 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 105 components and 1.02518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.163169Jy sigma=0.000652 ! Fit after self-cal, rms=0.163233Jy sigma=0.000652 ! Inverting map ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.163233Jy sigma=0.000652 ! Fit after self-cal, rms=0.164077Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.7966 mas, bmaj=2.331 mas, bpa=-0.489 degrees ! Estimated noise=1106.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00349374 Jy ! Component: 100 - total flux cleaned = -0.00454567 Jy ! Component: 150 - total flux cleaned = -0.0050662 Jy ! Component: 200 - total flux cleaned = -0.00542625 Jy ! Total flux subtracted in 200 components = -0.00542625 Jy ! Clean residual min=-0.004673 max=0.004144 Jy/beam ! Clean residual mean=0.000077 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 1.01975 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 119 components and 1.01975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.163721Jy sigma=0.000645 ! Fit after self-cal, rms=0.163686Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00048625 Jy ! Component: 100 - total flux cleaned = -0.000596476 Jy ! Component: 150 - total flux cleaned = -0.000794631 Jy ! Component: 200 - total flux cleaned = -0.00097846 Jy ! Total flux subtracted in 200 components = -0.00097846 Jy ! Clean residual min=-0.004352 max=0.004025 Jy/beam ! Clean residual mean=0.000076 rms=0.001167 Jy/beam ! Combined flux in latest and established models = 1.01877 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 128 components and 1.01877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.163542Jy sigma=0.000644 ! Fit after self-cal, rms=0.163519Jy sigma=0.000644 ! Inverting map ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.163519Jy sigma=0.000644 ! Fit after self-cal, rms=0.165278Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.7983 mas, bmaj=2.333 mas, bpa=-0.4215 degrees ! Estimated noise=1107.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00356808 Jy ! Component: 100 - total flux cleaned = -0.00401444 Jy ! Component: 150 - total flux cleaned = -0.00440696 Jy ! Component: 200 - total flux cleaned = -0.00467046 Jy ! Total flux subtracted in 200 components = -0.00467046 Jy ! Clean residual min=-0.004128 max=0.003732 Jy/beam ! Clean residual mean=0.000045 rms=0.001072 Jy/beam ! Combined flux in latest and established models = 1.0141 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 139 components and 1.0141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165102Jy sigma=0.000635 ! Fit after self-cal, rms=0.165096Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000784219 Jy ! Component: 100 - total flux cleaned = -0.000780307 Jy ! Component: 150 - total flux cleaned = -0.000920966 Jy ! Component: 200 - total flux cleaned = -0.000986209 Jy ! Total flux subtracted in 200 components = -0.000986209 Jy ! Clean residual min=-0.003981 max=0.003470 Jy/beam ! Clean residual mean=0.000044 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 1.01312 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 141 components and 1.01312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165021Jy sigma=0.000634 ! Fit after self-cal, rms=0.165008Jy sigma=0.000634 ! Inverting map ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165008Jy sigma=0.000634 ! Fit after self-cal, rms=0.166331Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=2.491 mas, bmaj=8.479 mas, bpa=0.6294 degrees ! Estimated noise=1437.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0023485 Jy ! Component: 100 - total flux cleaned = -0.00277821 Jy ! Component: 150 - total flux cleaned = -0.00311473 Jy ! Component: 200 - total flux cleaned = -0.00333692 Jy ! Total flux subtracted in 200 components = -0.00333692 Jy ! Clean residual min=-0.004235 max=0.003671 Jy/beam ! Clean residual mean=0.000090 rms=0.001372 Jy/beam ! Combined flux in latest and established models = 1.00978 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 145 components and 1.00978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.166286Jy sigma=0.000633 ! Fit after self-cal, rms=0.166282Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162273 Jy ! Component: 100 - total flux cleaned = -0.000153542 Jy ! Component: 150 - total flux cleaned = -0.000154565 Jy ! Component: 200 - total flux cleaned = -0.000257856 Jy ! Total flux subtracted in 200 components = -0.000257856 Jy ! Clean residual min=-0.004178 max=0.003716 Jy/beam ! Clean residual mean=0.000090 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 1.00952 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 149 components and 1.00952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.166275Jy sigma=0.000633 ! Fit after self-cal, rms=0.166266Jy sigma=0.000633 ! Inverting map ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.7983 mas, bmaj=2.33 mas, bpa=-0.4675 degrees ! Estimated noise=1107.14 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7983 x 2.33 at -0.4675 degrees (North through East) ! Clean map min=-0.0049223 max=0.67531 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.166266Jy sigma=0.000633 ! Fit after self-cal, rms=0.164722Jy sigma=0.000578 ! Inverting map and beam ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.797 mas, bmaj=2.327 mas, bpa=-0.5413 degrees ! Estimated noise=1103.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00254518 Jy ! Component: 100 - total flux cleaned = -0.00301401 Jy ! Component: 150 - total flux cleaned = -0.00327937 Jy ! Component: 200 - total flux cleaned = -0.0034604 Jy ! Total flux subtracted in 200 components = -0.0034604 Jy ! Clean residual min=-0.003760 max=0.002905 Jy/beam ! Clean residual mean=0.000040 rms=0.000948 Jy/beam ! Combined flux in latest and established models = 1.00606 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 152 components and 1.00606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.164634Jy sigma=0.000577 ! Fit after self-cal, rms=0.164630Jy sigma=0.000577 ! Inverting map ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000491261 Jy ! Component: 100 - total flux cleaned = -0.000430758 Jy ! Component: 150 - total flux cleaned = -0.000428691 Jy ! Component: 200 - total flux cleaned = -0.000523221 Jy ! Total flux subtracted in 200 components = -0.000523221 Jy ! Clean residual min=-0.003626 max=0.002800 Jy/beam ! Clean residual mean=0.000039 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 1.00554 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 157 components and 1.00554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.164593Jy sigma=0.000577 ! Fit after self-cal, rms=0.164591Jy sigma=0.000577 ! Inverting map ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.164591Jy sigma=0.000577 ! Fit after self-cal, rms=0.165629Jy sigma=0.000576 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.5971 mas, bmaj=1.805 mas, bpa=-2.643 degrees ! Estimated noise=1875.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.517079 Jy ! Component: 100 - total flux cleaned = 0.714105 Jy ! Component: 150 - total flux cleaned = 0.798371 Jy ! Component: 200 - total flux cleaned = 0.848157 Jy ! Total flux subtracted in 200 components = 0.848157 Jy ! Clean residual min=-0.012014 max=0.026926 Jy/beam ! Clean residual mean=0.000025 rms=0.003628 Jy/beam ! Combined flux in latest and established models = 0.848157 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.848157 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.7968 mas, bmaj=2.322 mas, bpa=-0.614 degrees ! Estimated noise=1102.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0679163 Jy ! Component: 100 - total flux cleaned = 0.102032 Jy ! Component: 150 - total flux cleaned = 0.121662 Jy ! Component: 200 - total flux cleaned = 0.13368 Jy ! Total flux subtracted in 200 components = 0.13368 Jy ! Clean residual min=-0.004044 max=0.006837 Jy/beam ! Clean residual mean=0.000037 rms=0.001433 Jy/beam ! Combined flux in latest and established models = 0.981837 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 88 components and 0.981837 Jy ! Inverting map ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (-0.8, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00764306 Jy ! Component: 100 - total flux cleaned = 0.0124478 Jy ! Component: 150 - total flux cleaned = 0.015521 Jy ! Component: 200 - total flux cleaned = 0.0170397 Jy ! Total flux subtracted in 200 components = 0.0170397 Jy ! Clean residual min=-0.003310 max=0.004202 Jy/beam ! Clean residual mean=0.000038 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.998877 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 115 components and 0.998877 Jy ! Inverting map ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (1.6, -15.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00368281 Jy ! Component: 100 - total flux cleaned = 0.00411418 Jy ! Component: 150 - total flux cleaned = 0.00435713 Jy ! Component: 200 - total flux cleaned = 0.00452635 Jy ! Total flux subtracted in 200 components = 0.00452635 Jy ! Clean residual min=-0.003159 max=0.002874 Jy/beam ! Clean residual mean=0.000040 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 1.0034 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 140 components and 1.0034 Jy ! Inverting map ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=2.497 mas, bmaj=8.482 mas, bpa=0.6037 degrees ! Estimated noise=1433.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000802625 Jy ! Component: 100 - total flux cleaned = 0.00100398 Jy ! Component: 150 - total flux cleaned = 0.00100169 Jy ! Component: 200 - total flux cleaned = 0.00103209 Jy ! Total flux subtracted in 200 components = 0.00103209 Jy ! Clean residual min=-0.003429 max=0.002877 Jy/beam ! Clean residual mean=0.000086 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 1.00444 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.50891e-07 Jy ! Component: 100 - total flux cleaned = 2.76881e-05 Jy ! Component: 150 - total flux cleaned = 5.40366e-05 Jy ! Component: 200 - total flux cleaned = 5.4109e-05 Jy ! Total flux subtracted in 200 components = 5.4109e-05 Jy ! Clean residual min=-0.003443 max=0.002870 Jy/beam ! Clean residual mean=0.000086 rms=0.001134 Jy/beam ! Combined flux in latest and established models = 1.00449 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 154 components and 1.00449 Jy ! Inverting map ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.7968 mas, bmaj=2.322 mas, bpa=-0.614 degrees ! Estimated noise=1102.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000416923 Jy ! Component: 100 - total flux cleaned = -0.000358747 Jy ! Component: 150 - total flux cleaned = -0.000358984 Jy ! Component: 200 - total flux cleaned = -0.00025859 Jy ! Total flux subtracted in 200 components = -0.00025859 Jy ! Clean residual min=-0.003171 max=0.002949 Jy/beam ! Clean residual mean=0.000040 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 1.00423 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 171 components and 1.00423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.165641Jy sigma=0.000576 ! Fit after self-cal, rms=0.165625Jy sigma=0.000575 wmodel J0922-3959_X_2017_03_27_pus_map.mod ! Writing 171 model components to file: J0922-3959_X_2017_03_27_pus_map.mod wobs J0922-3959_X_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0922-3959_X_2017_03_27_pus_uvs.fits wwins J0922-3959_X_2017_03_27_pus_map.win ! wwins: Wrote 6 windows to J0922-3959_X_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000923707 Jy ! Component: 100 - total flux cleaned = -0.0014882 Jy ! Component: 150 - total flux cleaned = -0.00182924 Jy ! Component: 200 - total flux cleaned = -0.0022052 Jy ! Component: 250 - total flux cleaned = -0.00270754 Jy ! Component: 300 - total flux cleaned = -0.00301903 Jy ! Component: 350 - total flux cleaned = -0.00332442 Jy ! Component: 400 - total flux cleaned = -0.00370723 Jy ! Component: 450 - total flux cleaned = -0.00383175 Jy ! Component: 500 - total flux cleaned = -0.00383169 Jy ! Component: 550 - total flux cleaned = -0.00387261 Jy ! Component: 600 - total flux cleaned = -0.00391167 Jy ! Component: 650 - total flux cleaned = -0.00379541 Jy ! Component: 700 - total flux cleaned = -0.00375749 Jy ! Component: 750 - total flux cleaned = -0.00375742 Jy ! Component: 800 - total flux cleaned = -0.00379453 Jy ! Component: 850 - total flux cleaned = -0.0037589 Jy ! Component: 900 - total flux cleaned = -0.00375951 Jy ! Component: 950 - total flux cleaned = -0.00376006 Jy ! Component: 1000 - total flux cleaned = -0.00382901 Jy ! Component: 1050 - total flux cleaned = -0.00376069 Jy ! Component: 1100 - total flux cleaned = -0.00379409 Jy ! Component: 1150 - total flux cleaned = -0.00366075 Jy ! Component: 1200 - total flux cleaned = -0.00359502 Jy ! Component: 1250 - total flux cleaned = -0.00356213 Jy ! Component: 1300 - total flux cleaned = -0.0034979 Jy ! Component: 1350 - total flux cleaned = -0.00346595 Jy ! Component: 1400 - total flux cleaned = -0.00337186 Jy ! Component: 1450 - total flux cleaned = -0.00324917 Jy ! Component: 1500 - total flux cleaned = -0.0033101 Jy ! Component: 1550 - total flux cleaned = -0.00321996 Jy ! Component: 1600 - total flux cleaned = -0.00322018 Jy ! Component: 1650 - total flux cleaned = -0.00316118 Jy ! Component: 1700 - total flux cleaned = -0.00316091 Jy ! Component: 1750 - total flux cleaned = -0.00304527 Jy ! Component: 1800 - total flux cleaned = -0.00298869 Jy ! Component: 1850 - total flux cleaned = -0.00298918 Jy ! Component: 1900 - total flux cleaned = -0.00301705 Jy ! Component: 1950 - total flux cleaned = -0.00304433 Jy ! Component: 2000 - total flux cleaned = -0.00293514 Jy ! Total flux subtracted in 2048 components = -0.00296251 Jy ! Clean residual min=-0.001556 max=0.001528 Jy/beam ! Clean residual mean=0.000041 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 1.00127 Jy keep ! Adding 129 model components to the UV plane model. ! The established model now contains 300 components and 1.00127 Jy ![Exited script file: muppet] wmap "J0922-3959_X_2017_03_27_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7968 x 2.322 at -0.614 degrees (North through East) ! Clean map min=-0.0028179 max=0.6817 Jy/beam ! Writing clean map to FITS file: J0922-3959_X_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.681699 invert ! Inverting map ! Your choice of large map pixels excluded 0.171% of the data. ! The x-axis pixel size should ideally be below 0.199 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000526416 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.231664 0.231664 0.463327 0.926654 1.85331 3.70662 7.41323 14.8265 29.6529 59.3059 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.681 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7968 x 2.322 at -0.614 degrees (North through East) ! Clean map min=-0.0028179 max=0.6817 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0922-3959_X_2017_03_27_pus_uvs.log closed on Sat Apr 27 22:01:40 2019