! Started logfile: J0922-3959_S_2017_10_09_pus_uvs.log on Sun May 12 13:08:58 2019 obs J0922-3959_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0922-3959_S_2017_10_09_pus_uva.fits ! AN table 1: 16 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.371528 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0922-3959 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 856 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0922-3959_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 105 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.540243Jy sigma=0.003181 ! Fit after self-cal, rms=0.514265Jy sigma=0.003049 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.159 mas, bmaj=61.94 mas, bpa=-9.287 degrees ! Estimated noise=5592.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.631343 Jy ! Component: 100 - total flux cleaned = 0.910721 Jy ! Total flux subtracted in 100 components = 0.910721 Jy ! Clean residual min=-0.077733 max=0.130835 Jy/beam ! Clean residual mean=0.000940 rms=0.037912 Jy/beam ! Combined flux in latest and established models = 0.910721 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.910721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.360538Jy sigma=0.001959 ! Fit after self-cal, rms=0.360157Jy sigma=0.001956 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.953 mas, bmaj=63.57 mas, bpa=-9.236 degrees ! Estimated noise=4839.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.2194 Jy ! Component: 100 - total flux cleaned = 0.341357 Jy ! Component: 150 - total flux cleaned = 0.379593 Jy ! Component: 200 - total flux cleaned = 0.369401 Jy ! Total flux subtracted in 200 components = 0.369401 Jy ! Clean residual min=-0.032145 max=0.032228 Jy/beam ! Clean residual mean=0.000070 rms=0.012845 Jy/beam ! Combined flux in latest and established models = 1.28012 Jy ! Performing phase self-cal ! Adding 130 model components to the UV plane model. ! The established model now contains 160 components and 1.28012 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.181291Jy sigma=0.000915 ! Fit after self-cal, rms=0.181180Jy sigma=0.000914 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.91 HN 1.01 KP 1.06 ! LA 1.08 MK 1.00* NL 0.97 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.15 KP 1.04 ! LA 1.03 MK 1.00* NL 1.04 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.08 KP 0.91 ! LA 0.81 MK 1.00* NL 1.06 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.181180Jy sigma=0.000914 ! Fit after self-cal, rms=0.133304Jy sigma=0.000708 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.199 mas, bmaj=62.46 mas, bpa=-9.457 degrees ! Estimated noise=5060.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230073 Jy ! Component: 100 - total flux cleaned = 0.00151531 Jy ! Component: 150 - total flux cleaned = 0.000196692 Jy ! Component: 200 - total flux cleaned = 0.000500505 Jy ! Total flux subtracted in 200 components = 0.000500505 Jy ! Clean residual min=-0.005186 max=0.005165 Jy/beam ! Clean residual mean=0.000045 rms=0.002060 Jy/beam ! Combined flux in latest and established models = 1.28062 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 217 components and 1.28062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126224Jy sigma=0.000665 ! Fit after self-cal, rms=0.126074Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126074Jy sigma=0.000664 ! Fit after self-cal, rms=0.125236Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.177 mas, bmaj=62.49 mas, bpa=-9.432 degrees ! Estimated noise=5029.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305807 Jy ! Component: 100 - total flux cleaned = 0.000113044 Jy ! Component: 150 - total flux cleaned = 0.000665914 Jy ! Component: 200 - total flux cleaned = 0.00051358 Jy ! Total flux subtracted in 200 components = 0.00051358 Jy ! Clean residual min=-0.002481 max=0.002484 Jy/beam ! Clean residual mean=-0.000005 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 1.28114 Jy selfcal ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 274 components and 1.28114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124609Jy sigma=0.000660 ! Fit after self-cal, rms=0.124592Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00065787 Jy ! Component: 100 - total flux cleaned = 0.000405914 Jy ! Component: 150 - total flux cleaned = -0.000176878 Jy ! Component: 200 - total flux cleaned = -0.000956439 Jy ! Total flux subtracted in 200 components = -0.000956439 Jy ! Clean residual min=-0.001809 max=0.001800 Jy/beam ! Clean residual mean=-0.000018 rms=0.000707 Jy/beam ! Combined flux in latest and established models = 1.28018 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 325 components and 1.28018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124368Jy sigma=0.000658 ! Fit after self-cal, rms=0.124365Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124365Jy sigma=0.000658 ! Fit after self-cal, rms=0.124198Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.173 mas, bmaj=62.48 mas, bpa=-9.427 degrees ! Estimated noise=5023.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142363 Jy ! Component: 100 - total flux cleaned = -0.000153835 Jy ! Component: 150 - total flux cleaned = -0.000821759 Jy ! Component: 200 - total flux cleaned = -0.00118902 Jy ! Total flux subtracted in 200 components = -0.00118902 Jy ! Clean residual min=-0.001523 max=0.001511 Jy/beam ! Clean residual mean=-0.000014 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 1.27899 Jy selfcal ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 367 components and 1.27899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124064Jy sigma=0.000658 ! Fit after self-cal, rms=0.124058Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109814 Jy ! Component: 100 - total flux cleaned = -0.000225883 Jy ! Component: 150 - total flux cleaned = -0.000717438 Jy ! Component: 200 - total flux cleaned = -0.00103715 Jy ! Total flux subtracted in 200 components = -0.00103715 Jy ! Clean residual min=-0.001310 max=0.001313 Jy/beam ! Clean residual mean=-0.000014 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 1.27795 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 394 components and 1.27795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123959Jy sigma=0.000657 ! Fit after self-cal, rms=0.123957Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123957Jy sigma=0.000657 ! Fit after self-cal, rms=0.123933Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.883 mas, bmaj=64.9 mas, bpa=-11.12 degrees ! Estimated noise=5510.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.51152e-05 Jy ! Component: 100 - total flux cleaned = -0.000337443 Jy ! Component: 150 - total flux cleaned = -0.000573846 Jy ! Component: 200 - total flux cleaned = -0.000744767 Jy ! Total flux subtracted in 200 components = -0.000744767 Jy ! Clean residual min=-0.000934 max=0.000929 Jy/beam ! Clean residual mean=-0.000005 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 1.27721 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 433 components and 1.27721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123879Jy sigma=0.000657 ! Fit after self-cal, rms=0.123880Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000410427 Jy ! Component: 100 - total flux cleaned = -0.000514813 Jy ! Component: 150 - total flux cleaned = -0.000464302 Jy ! Component: 200 - total flux cleaned = -0.000516472 Jy ! Total flux subtracted in 200 components = -0.000516472 Jy ! Clean residual min=-0.000828 max=0.000836 Jy/beam ! Clean residual mean=-0.000007 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 1.27669 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 474 components and 1.27669 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123834Jy sigma=0.000657 ! Fit after self-cal, rms=0.123835Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.172 mas, bmaj=62.48 mas, bpa=-9.426 degrees ! Estimated noise=5022.38 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.172 x 62.48 at -9.426 degrees (North through East) ! Clean map min=-0.015791 max=0.72897 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123835Jy sigma=0.000657 ! Fit after self-cal, rms=0.113666Jy sigma=0.000577 ! Inverting map and beam ! Estimated beam: bmin=5.172 mas, bmaj=62.51 mas, bpa=-9.43 degrees ! Estimated noise=5024.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.67138e-05 Jy ! Component: 100 - total flux cleaned = 0.000251799 Jy ! Component: 150 - total flux cleaned = 4.01565e-05 Jy ! Component: 200 - total flux cleaned = -0.000446242 Jy ! Total flux subtracted in 200 components = -0.000446242 Jy ! Clean residual min=-0.001151 max=0.001136 Jy/beam ! Clean residual mean=-0.000010 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 1.27624 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 517 components and 1.27624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113572Jy sigma=0.000576 ! Fit after self-cal, rms=0.113566Jy sigma=0.000576 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000476267 Jy ! Component: 100 - total flux cleaned = -0.000855761 Jy ! Component: 150 - total flux cleaned = -0.00103848 Jy ! Component: 200 - total flux cleaned = -0.00121681 Jy ! Total flux subtracted in 200 components = -0.00121681 Jy ! Clean residual min=-0.000980 max=0.000972 Jy/beam ! Clean residual mean=-0.000009 rms=0.000360 Jy/beam ! Combined flux in latest and established models = 1.27503 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 542 components and 1.27503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113504Jy sigma=0.000576 ! Fit after self-cal, rms=0.113500Jy sigma=0.000576 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113500Jy sigma=0.000576 ! Fit after self-cal, rms=0.113508Jy sigma=0.000576 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.402 mas, bmaj=60.32 mas, bpa=-9.552 degrees ! Estimated noise=5816.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.659609 Jy ! Component: 100 - total flux cleaned = 0.929228 Jy ! Component: 150 - total flux cleaned = 1.07418 Jy ! Component: 200 - total flux cleaned = 1.16792 Jy ! Total flux subtracted in 200 components = 1.16792 Jy ! Clean residual min=-0.046987 max=0.049985 Jy/beam ! Clean residual mean=0.000361 rms=0.017527 Jy/beam ! Combined flux in latest and established models = 1.16792 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 89 model components to the UV plane model. ! The established model now contains 89 components and 1.16792 Jy ! Inverting map and beam ! Estimated beam: bmin=5.171 mas, bmaj=62.52 mas, bpa=-9.429 degrees ! Estimated noise=5023.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0757802 Jy ! Component: 100 - total flux cleaned = 0.0842268 Jy ! Component: 150 - total flux cleaned = 0.0800671 Jy ! Component: 200 - total flux cleaned = 0.071715 Jy ! Total flux subtracted in 200 components = 0.071715 Jy ! Clean residual min=-0.018683 max=0.018221 Jy/beam ! Clean residual mean=0.000183 rms=0.007396 Jy/beam ! Combined flux in latest and established models = 1.23963 Jy ! Adding 93 model components to the UV plane model. ! The established model now contains 179 components and 1.23963 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.884 mas, bmaj=64.96 mas, bpa=-11.13 degrees ! Estimated noise=5512.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00251373 Jy ! Component: 100 - total flux cleaned = -0.00305889 Jy ! Component: 150 - total flux cleaned = -0.00359031 Jy ! Component: 200 - total flux cleaned = -0.00400446 Jy ! Total flux subtracted in 200 components = -0.00400446 Jy ! Clean residual min=-0.006728 max=0.006777 Jy/beam ! Clean residual mean=0.000065 rms=0.003034 Jy/beam ! Combined flux in latest and established models = 1.23563 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.64541e-05 Jy ! Component: 100 - total flux cleaned = 4.84236e-05 Jy ! Component: 150 - total flux cleaned = 2.88605e-05 Jy ! Component: 200 - total flux cleaned = 0.000307093 Jy ! Total flux subtracted in 200 components = 0.000307093 Jy ! Clean residual min=-0.004561 max=0.004528 Jy/beam ! Clean residual mean=0.000004 rms=0.001725 Jy/beam ! Combined flux in latest and established models = 1.23594 Jy ! Adding 155 model components to the UV plane model. ! The established model now contains 330 components and 1.23594 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.171 mas, bmaj=62.52 mas, bpa=-9.429 degrees ! Estimated noise=5023.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00065996 Jy ! Component: 100 - total flux cleaned = -9.39683e-05 Jy ! Component: 150 - total flux cleaned = -0.000420032 Jy ! Component: 200 - total flux cleaned = -0.00027728 Jy ! Total flux subtracted in 200 components = -0.00027728 Jy ! Clean residual min=-0.002419 max=0.002403 Jy/beam ! Clean residual mean=0.000000 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 1.23566 Jy selfcal ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 386 components and 1.23566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114357Jy sigma=0.000580 ! Fit after self-cal, rms=0.114314Jy sigma=0.000580 wmodel J0922-3959_S_2017_10_09_pus_map.mod ! Writing 386 model components to file: J0922-3959_S_2017_10_09_pus_map.mod wobs J0922-3959_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0922-3959_S_2017_10_09_pus_uvs.fits wwins J0922-3959_S_2017_10_09_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0922-3959_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.171 x 62.52 at -9.429 degrees (North through East) ! Clean map min=-0.02063 max=0.7164 Jy/beam ! Writing clean map to FITS file: J0922-3959_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.716404 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000933578 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.390943 0.390943 0.781887 1.56377 3.12755 6.25509 12.5102 25.0204 50.0407 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.716 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.171 x 62.52 at -9.429 degrees (North through East) ! Clean map min=-0.02063 max=0.7164 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0922-3959_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:09:05 2019