! Started logfile: J0922-3959_S_2017_08_12_pus_uvs.log on Fri May 10 14:56:26 2019 obs J0922-3959_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0922-3959_S_2017_08_12_pus_uva.fits ! AN table 1: 26 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.370085 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0922-3959 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 1732 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0922-3959_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 98 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 227 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.449951Jy sigma=0.002837 ! Fit after self-cal, rms=0.271938Jy sigma=0.001671 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.418 mas, bmaj=7.582 mas, bpa=-3.062 degrees ! Estimated noise=3971.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.708681 Jy ! Component: 100 - total flux cleaned = 0.928975 Jy ! Total flux subtracted in 100 components = 0.928975 Jy ! Clean residual min=-0.044413 max=0.107670 Jy/beam ! Clean residual mean=-0.000397 rms=0.019440 Jy/beam ! Combined flux in latest and established models = 0.928975 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.928975 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251975Jy sigma=0.001569 ! Fit after self-cal, rms=0.251935Jy sigma=0.001569 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.047 mas, bmaj=9.168 mas, bpa=-2.315 degrees ! Estimated noise=3140.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.170516 Jy ! Component: 100 - total flux cleaned = 0.245106 Jy ! Component: 150 - total flux cleaned = 0.278068 Jy ! Component: 200 - total flux cleaned = 0.293037 Jy ! Total flux subtracted in 200 components = 0.293037 Jy ! Clean residual min=-0.013785 max=0.020936 Jy/beam ! Clean residual mean=0.000132 rms=0.004620 Jy/beam ! Combined flux in latest and established models = 1.22201 Jy ! Performing phase self-cal ! Adding 76 model components to the UV plane model. ! The established model now contains 86 components and 1.22201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118317Jy sigma=0.000722 ! Fit after self-cal, rms=0.118275Jy sigma=0.000721 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.02 ! LA 1.02 MK 1.01 NL 1.00* OV 1.00 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 1.00 ! LA 0.99 MK 0.98 NL 1.00* OV 1.03 ! PT 0.98 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.98 ! LA 1.01 MK 1.03 NL 1.00* OV 0.95 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.118275Jy sigma=0.000721 ! Fit after self-cal, rms=0.112526Jy sigma=0.000687 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=9.413 mas, bpa=-1.261 degrees ! Estimated noise=3170.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000266955 Jy ! Component: 100 - total flux cleaned = 0.000320222 Jy ! Component: 150 - total flux cleaned = 0.000368733 Jy ! Component: 200 - total flux cleaned = 0.000371056 Jy ! Total flux subtracted in 200 components = 0.000371056 Jy ! Clean residual min=-0.013509 max=0.020554 Jy/beam ! Clean residual mean=0.000085 rms=0.004266 Jy/beam ! Combined flux in latest and established models = 1.22238 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 92 components and 1.22238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112482Jy sigma=0.000687 ! Fit after self-cal, rms=0.112490Jy sigma=0.000687 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112490Jy sigma=0.000687 ! Fit after self-cal, rms=0.112006Jy sigma=0.000683 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=9.419 mas, bpa=-1.226 degrees ! Estimated noise=3172.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000291045 Jy ! Component: 100 - total flux cleaned = 0.000336018 Jy ! Component: 150 - total flux cleaned = 0.000378735 Jy ! Component: 200 - total flux cleaned = 0.000458169 Jy ! Total flux subtracted in 200 components = 0.000458169 Jy ! Clean residual min=-0.013290 max=0.020142 Jy/beam ! Clean residual mean=0.000056 rms=0.004199 Jy/beam ! Combined flux in latest and established models = 1.22284 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 92 components and 1.22284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111975Jy sigma=0.000683 ! Fit after self-cal, rms=0.111974Jy sigma=0.000683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -83). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0172176 Jy ! Component: 100 - total flux cleaned = 0.0236949 Jy ! Component: 150 - total flux cleaned = 0.0250238 Jy ! Component: 200 - total flux cleaned = 0.02617 Jy ! Total flux subtracted in 200 components = 0.02617 Jy ! Clean residual min=-0.011223 max=0.012716 Jy/beam ! Clean residual mean=0.000139 rms=0.002952 Jy/beam ! Combined flux in latest and established models = 1.24901 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 125 components and 1.24901 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109483Jy sigma=0.000668 ! Fit after self-cal, rms=0.109221Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109221Jy sigma=0.000667 ! Fit after self-cal, rms=0.108156Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=9.409 mas, bpa=-1.223 degrees ! Estimated noise=3167.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00436281 Jy ! Component: 100 - total flux cleaned = 0.00484804 Jy ! Component: 150 - total flux cleaned = 0.0052453 Jy ! Component: 200 - total flux cleaned = 0.00567628 Jy ! Total flux subtracted in 200 components = 0.00567628 Jy ! Clean residual min=-0.010621 max=0.010985 Jy/beam ! Clean residual mean=0.000037 rms=0.002727 Jy/beam ! Combined flux in latest and established models = 1.25469 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 145 components and 1.25469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107843Jy sigma=0.000659 ! Fit after self-cal, rms=0.107788Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114284 Jy ! Component: 100 - total flux cleaned = 0.00138721 Jy ! Component: 150 - total flux cleaned = 0.00166809 Jy ! Component: 200 - total flux cleaned = 0.00191479 Jy ! Total flux subtracted in 200 components = 0.00191479 Jy ! Clean residual min=-0.010663 max=0.010495 Jy/beam ! Clean residual mean=0.000042 rms=0.002692 Jy/beam ! Combined flux in latest and established models = 1.2566 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 153 components and 1.2566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107683Jy sigma=0.000658 ! Fit after self-cal, rms=0.107667Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107667Jy sigma=0.000658 ! Fit after self-cal, rms=0.107736Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.68 mas, bmaj=35.49 mas, bpa=-2.076 degrees ! Estimated noise=4107.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000368758 Jy ! Component: 100 - total flux cleaned = 0.000369074 Jy ! Component: 150 - total flux cleaned = 0.000373082 Jy ! Component: 200 - total flux cleaned = 0.000375549 Jy ! Total flux subtracted in 200 components = 0.000375549 Jy ! Clean residual min=-0.010229 max=0.015067 Jy/beam ! Clean residual mean=0.000075 rms=0.004150 Jy/beam ! Combined flux in latest and established models = 1.25698 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 155 components and 1.25698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107824Jy sigma=0.000658 ! Fit after self-cal, rms=0.107806Jy sigma=0.000658 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000367624 Jy ! Component: 100 - total flux cleaned = 0.000368788 Jy ! Component: 150 - total flux cleaned = 0.000371394 Jy ! Component: 200 - total flux cleaned = 0.000374977 Jy ! Total flux subtracted in 200 components = 0.000374977 Jy ! Clean residual min=-0.010159 max=0.015035 Jy/beam ! Clean residual mean=0.000079 rms=0.004152 Jy/beam ! Combined flux in latest and established models = 1.25735 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 155 components and 1.25735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107832Jy sigma=0.000658 ! Fit after self-cal, rms=0.107831Jy sigma=0.000658 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.074 mas, bmaj=9.414 mas, bpa=-1.221 degrees ! Estimated noise=3170.87 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.074 x 9.414 at -1.221 degrees (North through East) ! Clean map min=-0.015283 max=0.95831 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107831Jy sigma=0.000658 ! Fit after self-cal, rms=0.097828Jy sigma=0.000592 ! Inverting map and beam ! Estimated beam: bmin=3.071 mas, bmaj=9.412 mas, bpa=-1.194 degrees ! Estimated noise=3169.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000485857 Jy ! Component: 100 - total flux cleaned = 0.000231898 Jy ! Component: 150 - total flux cleaned = 4.59759e-05 Jy ! Component: 200 - total flux cleaned = 0.000338284 Jy ! Total flux subtracted in 200 components = 0.000338284 Jy ! Clean residual min=-0.010561 max=0.010549 Jy/beam ! Clean residual mean=0.000070 rms=0.002648 Jy/beam ! Combined flux in latest and established models = 1.25769 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 163 components and 1.25769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097553Jy sigma=0.000590 ! Fit after self-cal, rms=0.097532Jy sigma=0.000590 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000398078 Jy ! Component: 100 - total flux cleaned = 0.000273939 Jy ! Component: 150 - total flux cleaned = 0.000219944 Jy ! Component: 200 - total flux cleaned = 0.000222388 Jy ! Total flux subtracted in 200 components = 0.000222388 Jy ! Clean residual min=-0.010547 max=0.010434 Jy/beam ! Clean residual mean=0.000071 rms=0.002629 Jy/beam ! Combined flux in latest and established models = 1.25791 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 171 components and 1.25791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097461Jy sigma=0.000590 ! Fit after self-cal, rms=0.097457Jy sigma=0.000590 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097457Jy sigma=0.000590 ! Fit after self-cal, rms=0.097538Jy sigma=0.000590 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.417 mas, bmaj=7.755 mas, bpa=-1.767 degrees ! Estimated noise=4048.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.704822 Jy ! Component: 100 - total flux cleaned = 0.922752 Jy ! Component: 150 - total flux cleaned = 1.04509 Jy ! Component: 200 - total flux cleaned = 1.11672 Jy ! Total flux subtracted in 200 components = 1.11672 Jy ! Clean residual min=-0.022215 max=0.036420 Jy/beam ! Clean residual mean=-0.000195 rms=0.007400 Jy/beam ! Combined flux in latest and established models = 1.11672 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 1.11672 Jy ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=9.415 mas, bpa=-1.215 degrees ! Estimated noise=3172.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0597547 Jy ! Component: 100 - total flux cleaned = 0.0887722 Jy ! Component: 150 - total flux cleaned = 0.107592 Jy ! Component: 200 - total flux cleaned = 0.120186 Jy ! Total flux subtracted in 200 components = 0.120186 Jy ! Clean residual min=-0.012436 max=0.012324 Jy/beam ! Clean residual mean=0.000022 rms=0.003324 Jy/beam ! Combined flux in latest and established models = 1.23691 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 107 components and 1.23691 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.68 mas, bmaj=35.49 mas, bpa=-2.081 degrees ! Estimated noise=4110.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01286 Jy ! Component: 100 - total flux cleaned = 0.0174135 Jy ! Component: 150 - total flux cleaned = 0.018279 Jy ! Component: 200 - total flux cleaned = 0.0189765 Jy ! Total flux subtracted in 200 components = 0.0189765 Jy ! Clean residual min=-0.010272 max=0.014970 Jy/beam ! Clean residual mean=0.000114 rms=0.004207 Jy/beam ! Combined flux in latest and established models = 1.25588 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000565203 Jy ! Component: 100 - total flux cleaned = 0.00105549 Jy ! Component: 150 - total flux cleaned = 0.0015734 Jy ! Component: 200 - total flux cleaned = 0.00184483 Jy ! Total flux subtracted in 200 components = 0.00184483 Jy ! Clean residual min=-0.010241 max=0.014902 Jy/beam ! Clean residual mean=0.000125 rms=0.004142 Jy/beam ! Combined flux in latest and established models = 1.25773 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 140 components and 1.25773 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.073 mas, bmaj=9.415 mas, bpa=-1.215 degrees ! Estimated noise=3172.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133003 Jy ! Component: 100 - total flux cleaned = -0.000600168 Jy ! Component: 150 - total flux cleaned = 0.000362591 Jy ! Component: 200 - total flux cleaned = 0.000480123 Jy ! Total flux subtracted in 200 components = 0.000480123 Jy ! Clean residual min=-0.011088 max=0.011191 Jy/beam ! Clean residual mean=0.000068 rms=0.002777 Jy/beam ! Combined flux in latest and established models = 1.25821 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 153 components and 1.25821 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097986Jy sigma=0.000592 ! Fit after self-cal, rms=0.097867Jy sigma=0.000592 wmodel J0922-3959_S_2017_08_12_pus_map.mod ! Writing 153 model components to file: J0922-3959_S_2017_08_12_pus_map.mod wobs J0922-3959_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0922-3959_S_2017_08_12_pus_uvs.fits wwins J0922-3959_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J0922-3959_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146283 Jy ! Component: 100 - total flux cleaned = 0.00197384 Jy ! Component: 150 - total flux cleaned = 0.0028562 Jy ! Component: 200 - total flux cleaned = 0.00450207 Jy ! Component: 250 - total flux cleaned = 0.00576522 Jy ! Component: 300 - total flux cleaned = 0.00611468 Jy ! Component: 350 - total flux cleaned = 0.00690017 Jy ! Component: 400 - total flux cleaned = 0.00764341 Jy ! Component: 450 - total flux cleaned = 0.00824554 Jy ! Component: 500 - total flux cleaned = 0.0087197 Jy ! Component: 550 - total flux cleaned = 0.0096282 Jy ! Component: 600 - total flux cleaned = 0.0105839 Jy ! Component: 650 - total flux cleaned = 0.0115 Jy ! Component: 700 - total flux cleaned = 0.0124574 Jy ! Component: 750 - total flux cleaned = 0.0130759 Jy ! Component: 800 - total flux cleaned = 0.0137459 Jy ! Component: 850 - total flux cleaned = 0.0142463 Jy ! Component: 900 - total flux cleaned = 0.0145924 Jy ! Component: 950 - total flux cleaned = 0.014997 Jy ! Component: 1000 - total flux cleaned = 0.0153882 Jy ! Component: 1050 - total flux cleaned = 0.0156444 Jy ! Component: 1100 - total flux cleaned = 0.0162044 Jy ! Component: 1150 - total flux cleaned = 0.0166856 Jy ! Component: 1200 - total flux cleaned = 0.017038 Jy ! Component: 1250 - total flux cleaned = 0.0173252 Jy ! Component: 1300 - total flux cleaned = 0.0176624 Jy ! Component: 1350 - total flux cleaned = 0.0180477 Jy ! Component: 1400 - total flux cleaned = 0.0184793 Jy ! Component: 1450 - total flux cleaned = 0.0187949 Jy ! Component: 1500 - total flux cleaned = 0.0191054 Jy ! Component: 1550 - total flux cleaned = 0.0193588 Jy ! Component: 1600 - total flux cleaned = 0.0195085 Jy ! Component: 1650 - total flux cleaned = 0.0196081 Jy ! Component: 1700 - total flux cleaned = 0.0199007 Jy ! Component: 1750 - total flux cleaned = 0.0201889 Jy ! Component: 1800 - total flux cleaned = 0.020284 Jy ! Component: 1850 - total flux cleaned = 0.0204717 Jy ! Component: 1900 - total flux cleaned = 0.0205651 Jy ! Component: 1950 - total flux cleaned = 0.020841 Jy ! Component: 2000 - total flux cleaned = 0.0210228 Jy ! Component: 2050 - total flux cleaned = 0.0212033 Jy ! Component: 2100 - total flux cleaned = 0.0214276 Jy ! Component: 2150 - total flux cleaned = 0.0215616 Jy ! Component: 2200 - total flux cleaned = 0.021695 Jy ! Component: 2250 - total flux cleaned = 0.0218281 Jy ! Component: 2300 - total flux cleaned = 0.0218281 Jy ! Component: 2350 - total flux cleaned = 0.0218721 Jy ! Component: 2400 - total flux cleaned = 0.0219602 Jy ! Component: 2450 - total flux cleaned = 0.0219602 Jy ! Component: 2500 - total flux cleaned = 0.0219602 Jy ! Component: 2550 - total flux cleaned = 0.0220039 Jy ! Component: 2600 - total flux cleaned = 0.0220916 Jy ! Component: 2650 - total flux cleaned = 0.0221796 Jy ! Component: 2700 - total flux cleaned = 0.0222679 Jy ! Component: 2750 - total flux cleaned = 0.0224004 Jy ! Component: 2800 - total flux cleaned = 0.0224001 Jy ! Component: 2850 - total flux cleaned = 0.0226226 Jy ! Component: 2900 - total flux cleaned = 0.0227118 Jy ! Component: 2950 - total flux cleaned = 0.0228463 Jy ! Component: 3000 - total flux cleaned = 0.0229367 Jy ! Component: 3050 - total flux cleaned = 0.0230731 Jy ! Component: 3100 - total flux cleaned = 0.0232098 Jy ! Component: 3150 - total flux cleaned = 0.0233014 Jy ! Component: 3200 - total flux cleaned = 0.0233473 Jy ! Component: 3250 - total flux cleaned = 0.023487 Jy ! Component: 3300 - total flux cleaned = 0.0234873 Jy ! Component: 3350 - total flux cleaned = 0.023582 Jy ! Component: 3400 - total flux cleaned = 0.0235345 Jy ! Component: 3450 - total flux cleaned = 0.0235826 Jy ! Component: 3500 - total flux cleaned = 0.0235822 Jy ! Component: 3550 - total flux cleaned = 0.0236798 Jy ! Component: 3600 - total flux cleaned = 0.0236797 Jy ! Component: 3650 - total flux cleaned = 0.0237288 Jy ! Component: 3700 - total flux cleaned = 0.0238795 Jy ! Component: 3750 - total flux cleaned = 0.0238801 Jy ! Component: 3800 - total flux cleaned = 0.0239311 Jy ! Component: 3850 - total flux cleaned = 0.0239824 Jy ! Component: 3900 - total flux cleaned = 0.0240346 Jy ! Component: 3950 - total flux cleaned = 0.0240348 Jy ! Component: 4000 - total flux cleaned = 0.0240882 Jy ! Component: 4050 - total flux cleaned = 0.0240887 Jy ! Total flux subtracted in 4096 components = 0.0240883 Jy ! Clean residual min=-0.003083 max=0.003014 Jy/beam ! Clean residual mean=0.000089 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 1.28229 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 441 components and 1.28229 Jy ![Exited script file: muppet] wmap "J0922-3959_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.073 x 9.415 at -1.215 degrees (North through East) ! Clean map min=-0.0123 max=0.95094 Jy/beam ! Writing clean map to FITS file: J0922-3959_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.950936 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00109015 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.343919 0.343919 0.687838 1.37568 2.75135 5.5027 11.0054 22.0108 44.0216 88.0433 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0032 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.95 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.073 x 9.415 at -1.215 degrees (North through East) ! Clean map min=-0.0123 max=0.95094 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0922-3959_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:56:30 2019