! Started logfile: J0922-0529_S_2017_04_28_pus_uvs.log on Thu May 2 16:22:16 2019 obs J0922-0529_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0922-0529_S_2017_04_28_pus_uva.fits ! AN table 1: 83 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.955288 visibilities/baseline/integration-bin. ! Found source: J0922-0529 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 14272 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0922-0529_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 352 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.653639Jy sigma=0.022519 ! Fit after self-cal, rms=0.648291Jy sigma=0.022502 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.894 mas, bmaj=7.321 mas, bpa=-3.983 degrees ! Estimated noise=856.341 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.23304 Jy ! Component: 100 - total flux cleaned = 0.287732 Jy ! Total flux subtracted in 100 components = 0.287732 Jy ! Clean residual min=-0.068198 max=0.086134 Jy/beam ! Clean residual mean=0.000165 rms=0.022343 Jy/beam ! Combined flux in latest and established models = 0.287732 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.287732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.413938Jy sigma=0.006261 ! Fit after self-cal, rms=0.413796Jy sigma=0.006261 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.371 mas, bmaj=8.16 mas, bpa=-1.287 degrees ! Estimated noise=652.126 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0239766 Jy ! Component: 100 - total flux cleaned = 0.0239331 Jy ! Component: 150 - total flux cleaned = 0.0232692 Jy ! Component: 200 - total flux cleaned = 0.0227028 Jy ! Total flux subtracted in 200 components = 0.0227028 Jy ! Clean residual min=-0.067796 max=0.086356 Jy/beam ! Clean residual mean=0.000253 rms=0.021647 Jy/beam ! Combined flux in latest and established models = 0.310435 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 17 components and 0.310435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.403689Jy sigma=0.006548 ! Fit after self-cal, rms=0.403646Jy sigma=0.006548 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.74 HN 0.84 KP 0.81 ! LA 0.78 MK 0.85 NL 0.79 OV 0.83 ! PT 0.87 SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.67 HN 0.88 KP 0.77 ! LA 0.76 MK 0.85 NL 0.92 OV 0.84 ! PT 0.86 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.72 HN 0.85 KP 0.83 ! LA 0.78 MK 0.90 NL 0.83 OV 47.78 ! PT 0.85 SC 0.96 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.66 HN 0.85 KP 1.00* ! LA 0.60 MK 0.94 NL 1.00* OV 1.00* ! PT 0.87 SC 1.00* ! ! ! Fit before self-cal, rms=0.403646Jy sigma=0.006548 ! Fit after self-cal, rms=3.818368Jy sigma=0.001040 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.338 mas, bmaj=7.978 mas, bpa=-3.926 degrees ! Estimated noise=673.908 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163899 Jy ! Component: 100 - total flux cleaned = 0.0253076 Jy ! Component: 150 - total flux cleaned = 0.0295831 Jy ! Component: 200 - total flux cleaned = 0.0308363 Jy ! Total flux subtracted in 200 components = 0.0308363 Jy ! Clean residual min=-0.010095 max=0.009593 Jy/beam ! Clean residual mean=0.000014 rms=0.002558 Jy/beam ! Combined flux in latest and established models = 0.341271 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 31 components and 0.341271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.814665Jy sigma=0.001045 ! Fit after self-cal, rms=3.814755Jy sigma=0.001015 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=3.814755Jy sigma=0.001015 ! Fit after self-cal, rms=5.896683Jy sigma=0.000993 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.29 mas, bmaj=7.898 mas, bpa=-3.958 degrees ! Estimated noise=702.816 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0151105 Jy ! Component: 100 - total flux cleaned = 0.0224434 Jy ! Component: 150 - total flux cleaned = 0.0268252 Jy ! Component: 200 - total flux cleaned = 0.0287678 Jy ! Total flux subtracted in 200 components = 0.0287678 Jy ! Clean residual min=-0.010654 max=0.008111 Jy/beam ! Clean residual mean=0.000018 rms=0.002547 Jy/beam ! Combined flux in latest and established models = 0.370039 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 55 components and 0.370039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.892743Jy sigma=0.001006 ! Fit after self-cal, rms=5.892749Jy sigma=0.001006 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102632 Jy ! Component: 100 - total flux cleaned = 0.00162328 Jy ! Component: 150 - total flux cleaned = 0.00192849 Jy ! Component: 200 - total flux cleaned = 0.00214044 Jy ! Total flux subtracted in 200 components = 0.00214044 Jy ! Clean residual min=-0.010787 max=0.008157 Jy/beam ! Clean residual mean=0.000018 rms=0.002541 Jy/beam ! Combined flux in latest and established models = 0.372179 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.372179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.892484Jy sigma=0.001007 ! Fit after self-cal, rms=5.892485Jy sigma=0.001007 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.892485Jy sigma=0.001007 ! Fit after self-cal, rms=0.083457Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.288 mas, bmaj=7.898 mas, bpa=-3.744 degrees ! Estimated noise=701.216 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162671 Jy ! Component: 100 - total flux cleaned = -0.000383218 Jy ! Component: 150 - total flux cleaned = -0.000533563 Jy ! Component: 200 - total flux cleaned = -0.000638342 Jy ! Total flux subtracted in 200 components = -0.000638342 Jy ! Clean residual min=-0.002562 max=0.004248 Jy/beam ! Clean residual mean=0.000000 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.371541 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 0.371541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083417Jy sigma=0.000667 ! Fit after self-cal, rms=0.083294Jy sigma=0.000666 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00415303 Jy ! Component: 100 - total flux cleaned = 0.00510753 Jy ! Component: 150 - total flux cleaned = 0.00504308 Jy ! Component: 200 - total flux cleaned = 0.00504605 Jy ! Total flux subtracted in 200 components = 0.00504605 Jy ! Clean residual min=-0.002146 max=0.002696 Jy/beam ! Clean residual mean=-0.000001 rms=0.000526 Jy/beam ! Combined flux in latest and established models = 0.376587 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 86 components and 0.376587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083068Jy sigma=0.000664 ! Fit after self-cal, rms=0.083053Jy sigma=0.000664 ! Inverting map ! Added new window around map position (20.5, 14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023593 Jy ! Component: 100 - total flux cleaned = 0.00329002 Jy ! Component: 150 - total flux cleaned = 0.003432 Jy ! Component: 200 - total flux cleaned = 0.00347612 Jy ! Total flux subtracted in 200 components = 0.00347612 Jy ! Clean residual min=-0.002231 max=0.001977 Jy/beam ! Clean residual mean=-0.000002 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.380063 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 103 components and 0.380063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082964Jy sigma=0.000663 ! Fit after self-cal, rms=0.082963Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082963Jy sigma=0.000663 ! Fit after self-cal, rms=0.082715Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.541 mas, bmaj=12.89 mas, bpa=1.421 degrees ! Estimated noise=873.449 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137993 Jy ! Component: 100 - total flux cleaned = 0.00165203 Jy ! Component: 150 - total flux cleaned = 0.00184035 Jy ! Component: 200 - total flux cleaned = 0.00194317 Jy ! Total flux subtracted in 200 components = 0.00194317 Jy ! Clean residual min=-0.002054 max=0.001937 Jy/beam ! Clean residual mean=-0.000003 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.382006 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 118 components and 0.382006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082698Jy sigma=0.000662 ! Fit after self-cal, rms=0.082689Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00018513 Jy ! Component: 100 - total flux cleaned = 0.000349392 Jy ! Component: 150 - total flux cleaned = 0.000327071 Jy ! Component: 200 - total flux cleaned = 0.000346586 Jy ! Total flux subtracted in 200 components = 0.000346586 Jy ! Clean residual min=-0.002084 max=0.001971 Jy/beam ! Clean residual mean=-0.000003 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.382353 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 129 components and 0.382353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082682Jy sigma=0.000662 ! Fit after self-cal, rms=0.082679Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=7.884 mas, bpa=-3.689 degrees ! Estimated noise=700.642 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.285 x 7.884 at -3.689 degrees (North through East) ! Clean map min=-0.0019745 max=0.32049 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.792 mas, bmaj=7.092 mas, bpa=-4.037 degrees ! Estimated noise=905.588 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.247094 Jy ! Component: 100 - total flux cleaned = 0.305355 Jy ! Component: 150 - total flux cleaned = 0.331389 Jy ! Component: 200 - total flux cleaned = 0.345591 Jy ! Total flux subtracted in 200 components = 0.345591 Jy ! Clean residual min=-0.003197 max=0.007357 Jy/beam ! Clean residual mean=-0.000002 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.345591 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.345591 Jy ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=7.884 mas, bpa=-3.689 degrees ! Estimated noise=700.642 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126276 Jy ! Component: 100 - total flux cleaned = 0.019337 Jy ! Component: 150 - total flux cleaned = 0.0235615 Jy ! Component: 200 - total flux cleaned = 0.0265858 Jy ! Total flux subtracted in 200 components = 0.0265858 Jy ! Clean residual min=-0.002407 max=0.002097 Jy/beam ! Clean residual mean=0.000000 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.372177 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 61 components and 0.372177 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.541 mas, bmaj=12.89 mas, bpa=1.421 degrees ! Estimated noise=873.449 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00338157 Jy ! Component: 100 - total flux cleaned = 0.00531964 Jy ! Component: 150 - total flux cleaned = 0.00670227 Jy ! Component: 200 - total flux cleaned = 0.00775854 Jy ! Total flux subtracted in 200 components = 0.00775854 Jy ! Clean residual min=-0.002300 max=0.001982 Jy/beam ! Clean residual mean=-0.000002 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.379935 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00053996 Jy ! Component: 100 - total flux cleaned = 0.000934977 Jy ! Component: 150 - total flux cleaned = 0.00129142 Jy ! Component: 200 - total flux cleaned = 0.00157172 Jy ! Total flux subtracted in 200 components = 0.00157172 Jy ! Clean residual min=-0.002149 max=0.001902 Jy/beam ! Clean residual mean=-0.000002 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.381507 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 131 components and 0.381507 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.285 mas, bmaj=7.884 mas, bpa=-3.689 degrees ! Estimated noise=700.642 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00012358 Jy ! Component: 100 - total flux cleaned = 4.70776e-05 Jy ! Component: 150 - total flux cleaned = -8.41295e-05 Jy ! Component: 200 - total flux cleaned = -8.37847e-05 Jy ! Total flux subtracted in 200 components = -8.37847e-05 Jy ! Clean residual min=-0.001853 max=0.001734 Jy/beam ! Clean residual mean=-0.000001 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.381423 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 152 components and 0.381423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082608Jy sigma=0.000661 ! Fit after self-cal, rms=0.082595Jy sigma=0.000661 wmodel J0922-0529_S_2017_04_28_pus_map.mod ! Writing 152 model components to file: J0922-0529_S_2017_04_28_pus_map.mod wobs J0922-0529_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0922-0529_S_2017_04_28_pus_uvs.fits wwins J0922-0529_S_2017_04_28_pus_map.win ! wwins: Wrote 3 windows to J0922-0529_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000513264 Jy ! Component: 100 - total flux cleaned = -0.000904256 Jy ! Component: 150 - total flux cleaned = -0.00127213 Jy ! Component: 200 - total flux cleaned = -0.00148878 Jy ! Component: 250 - total flux cleaned = -0.001619 Jy ! Component: 300 - total flux cleaned = -0.00171969 Jy ! Component: 350 - total flux cleaned = -0.00181846 Jy ! Component: 400 - total flux cleaned = -0.0019392 Jy ! Component: 450 - total flux cleaned = -0.0020806 Jy ! Component: 500 - total flux cleaned = -0.00224139 Jy ! Component: 550 - total flux cleaned = -0.00233132 Jy ! Component: 600 - total flux cleaned = -0.00244216 Jy ! Component: 650 - total flux cleaned = -0.00259422 Jy ! Component: 700 - total flux cleaned = -0.00270115 Jy ! Component: 750 - total flux cleaned = -0.00284864 Jy ! Component: 800 - total flux cleaned = -0.0029733 Jy ! Component: 850 - total flux cleaned = -0.00305544 Jy ! Component: 900 - total flux cleaned = -0.00315693 Jy ! Component: 950 - total flux cleaned = -0.00325728 Jy ! Component: 1000 - total flux cleaned = -0.00333658 Jy ! Component: 1050 - total flux cleaned = -0.00351303 Jy ! Component: 1100 - total flux cleaned = -0.00357118 Jy ! Component: 1150 - total flux cleaned = -0.00368659 Jy ! Component: 1200 - total flux cleaned = -0.00378202 Jy ! Component: 1250 - total flux cleaned = -0.00385724 Jy ! Component: 1300 - total flux cleaned = -0.00387587 Jy ! Component: 1350 - total flux cleaned = -0.00393163 Jy ! Component: 1400 - total flux cleaned = -0.00398661 Jy ! Component: 1450 - total flux cleaned = -0.00405927 Jy ! Component: 1500 - total flux cleaned = -0.00402354 Jy ! Component: 1550 - total flux cleaned = -0.00414846 Jy ! Component: 1600 - total flux cleaned = -0.00423666 Jy ! Component: 1650 - total flux cleaned = -0.00423655 Jy ! Component: 1700 - total flux cleaned = -0.00425411 Jy ! Component: 1750 - total flux cleaned = -0.00435749 Jy ! Component: 1800 - total flux cleaned = -0.00435749 Jy ! Component: 1850 - total flux cleaned = -0.00440846 Jy ! Component: 1900 - total flux cleaned = -0.00449231 Jy ! Component: 1950 - total flux cleaned = -0.00445886 Jy ! Component: 2000 - total flux cleaned = -0.00447534 Jy ! Component: 2050 - total flux cleaned = -0.00447544 Jy ! Component: 2100 - total flux cleaned = -0.0045403 Jy ! Component: 2150 - total flux cleaned = -0.00449194 Jy ! Component: 2200 - total flux cleaned = -0.00457213 Jy ! Component: 2250 - total flux cleaned = -0.00458807 Jy ! Component: 2300 - total flux cleaned = -0.00463529 Jy ! Component: 2350 - total flux cleaned = -0.00469794 Jy ! Component: 2400 - total flux cleaned = -0.00466681 Jy ! Component: 2450 - total flux cleaned = -0.00469762 Jy ! Component: 2500 - total flux cleaned = -0.00475884 Jy ! Component: 2550 - total flux cleaned = -0.004835 Jy ! Component: 2600 - total flux cleaned = -0.00486527 Jy ! Component: 2650 - total flux cleaned = -0.00492534 Jy ! Component: 2700 - total flux cleaned = -0.00497014 Jy ! Component: 2750 - total flux cleaned = -0.00502927 Jy ! Component: 2800 - total flux cleaned = -0.00508802 Jy ! Component: 2850 - total flux cleaned = -0.00510265 Jy ! Component: 2900 - total flux cleaned = -0.00514619 Jy ! Component: 2950 - total flux cleaned = -0.00520371 Jy ! Component: 3000 - total flux cleaned = -0.00517497 Jy ! Component: 3050 - total flux cleaned = -0.00520342 Jy ! Component: 3100 - total flux cleaned = -0.00527413 Jy ! Component: 3150 - total flux cleaned = -0.00523207 Jy ! Component: 3200 - total flux cleaned = -0.00532989 Jy ! Component: 3250 - total flux cleaned = -0.00532986 Jy ! Component: 3300 - total flux cleaned = -0.00538508 Jy ! Component: 3350 - total flux cleaned = -0.00530271 Jy ! Component: 3400 - total flux cleaned = -0.0053571 Jy ! Component: 3450 - total flux cleaned = -0.00538423 Jy ! Component: 3500 - total flux cleaned = -0.00539785 Jy ! Component: 3550 - total flux cleaned = -0.00539784 Jy ! Component: 3600 - total flux cleaned = -0.00542445 Jy ! Component: 3650 - total flux cleaned = -0.00541115 Jy ! Component: 3700 - total flux cleaned = -0.00542447 Jy ! Component: 3750 - total flux cleaned = -0.0054507 Jy ! Component: 3800 - total flux cleaned = -0.00541162 Jy ! Component: 3850 - total flux cleaned = -0.00552839 Jy ! Component: 3900 - total flux cleaned = -0.00547692 Jy ! Component: 3950 - total flux cleaned = -0.00547696 Jy ! Component: 4000 - total flux cleaned = -0.00554086 Jy ! Component: 4050 - total flux cleaned = -0.00554086 Jy ! Total flux subtracted in 4096 components = -0.00556627 Jy ! Clean residual min=-0.000830 max=0.000859 Jy/beam ! Clean residual mean=-0.000001 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.375857 Jy keep ! Adding 281 model components to the UV plane model. ! The established model now contains 433 components and 0.375857 Jy ![Exited script file: muppet] wmap "J0922-0529_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.285 x 7.884 at -3.689 degrees (North through East) ! Clean map min=-0.0014121 max=0.32289 Jy/beam ! Writing clean map to FITS file: J0922-0529_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.32289 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000231274 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.214879 0.214879 0.429758 0.859515 1.71903 3.43806 6.87612 13.7522 27.5045 55.009 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.322 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.285 x 7.884 at -3.689 degrees (North through East) ! Clean map min=-0.0014121 max=0.32289 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0922-0529_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:22:21 2019