! Started logfile: J0919-1847_S_2017_10_21_pus_uvs.log on Sat May 11 20:55:13 2019 obs J0919-1847_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0919-1847_S_2017_10_21_pus_uva.fits ! AN table 1: 146 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.89003 visibilities/baseline/integration-bin. ! Found source: J0919-1847 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 18712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0919-1847_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 104 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 217 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 132 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 938 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.972463Jy sigma=0.008436 ! Fit after self-cal, rms=0.942374Jy sigma=0.008183 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.79 mas, bmaj=14.26 mas, bpa=-22.78 degrees ! Estimated noise=1302.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0441535 Jy ! Component: 100 - total flux cleaned = 0.0545854 Jy ! Total flux subtracted in 100 components = 0.0545854 Jy ! Clean residual min=-0.004256 max=0.004759 Jy/beam ! Clean residual mean=0.000008 rms=0.001255 Jy/beam ! Combined flux in latest and established models = 0.0545854 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0545854 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089193Jy sigma=0.000739 ! Fit after self-cal, rms=0.088795Jy sigma=0.000736 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=17.22 mas, bpa=-21.55 degrees ! Estimated noise=728.746 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00805419 Jy ! Component: 100 - total flux cleaned = 0.0124775 Jy ! Component: 150 - total flux cleaned = 0.0154366 Jy ! Component: 200 - total flux cleaned = 0.0174678 Jy ! Total flux subtracted in 200 components = 0.0174678 Jy ! Clean residual min=-0.004843 max=0.008670 Jy/beam ! Clean residual mean=0.000030 rms=0.001733 Jy/beam ! Combined flux in latest and established models = 0.0720532 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 45 components and 0.0720532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088017Jy sigma=0.000729 ! Fit after self-cal, rms=0.088023Jy sigma=0.000728 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.27 HN 1.05 KP 1.02 ! LA 0.96 MK 1.03 NL 1.04 OV 1.17 ! PT 0.75 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.22 HN 1.13 KP 0.97 ! LA 0.90 MK 1.01 NL 1.13 OV 1.24 ! PT 0.80 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.23 HN 1.00 KP 0.98 ! LA 0.75 MK 1.03 NL 1.20 OV 1.09 ! PT 0.78 ! ! ! Correcting IF 4. ! A total of 96 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.75 KP 1.00* ! LA 0.81 MK 1.00* NL 1.00* OV 1.00* ! PT 0.77 ! ! ! Fit before self-cal, rms=0.088023Jy sigma=0.000728 ! Fit after self-cal, rms=0.090095Jy sigma=0.000720 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.533 mas, bmaj=17.63 mas, bpa=-21.61 degrees ! Estimated noise=736.023 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19, -34). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0057636 Jy ! Component: 100 - total flux cleaned = 0.00768049 Jy ! Component: 150 - total flux cleaned = 0.00795965 Jy ! Component: 200 - total flux cleaned = 0.00780523 Jy ! Total flux subtracted in 200 components = 0.00780523 Jy ! Clean residual min=-0.002384 max=0.002996 Jy/beam ! Clean residual mean=0.000005 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.0798584 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 95 components and 0.0798584 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089668Jy sigma=0.000717 ! Fit after self-cal, rms=0.090281Jy sigma=0.000714 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090281Jy sigma=0.000714 ! Fit after self-cal, rms=0.090758Jy sigma=0.000713 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.531 mas, bmaj=17.58 mas, bpa=-21.73 degrees ! Estimated noise=734.995 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251882 Jy ! Component: 100 - total flux cleaned = 0.00272596 Jy ! Component: 150 - total flux cleaned = 0.00267033 Jy ! Component: 200 - total flux cleaned = 0.0024776 Jy ! Total flux subtracted in 200 components = 0.0024776 Jy ! Clean residual min=-0.001848 max=0.002388 Jy/beam ! Clean residual mean=0.000006 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.082336 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 129 components and 0.082336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090632Jy sigma=0.000712 ! Fit after self-cal, rms=0.090731Jy sigma=0.000711 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000820132 Jy ! Component: 100 - total flux cleaned = 0.0006214 Jy ! Component: 150 - total flux cleaned = 0.00040029 Jy ! Component: 200 - total flux cleaned = 0.00023619 Jy ! Total flux subtracted in 200 components = 0.00023619 Jy ! Clean residual min=-0.001792 max=0.002306 Jy/beam ! Clean residual mean=0.000005 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.0825722 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 154 components and 0.0825722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090670Jy sigma=0.000711 ! Fit after self-cal, rms=0.090615Jy sigma=0.000711 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090615Jy sigma=0.000711 ! Fit after self-cal, rms=0.089586Jy sigma=0.000711 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.533 mas, bmaj=17.57 mas, bpa=-21.78 degrees ! Estimated noise=731.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156204 Jy ! Component: 100 - total flux cleaned = 0.00184775 Jy ! Component: 150 - total flux cleaned = 0.0018127 Jy ! Component: 200 - total flux cleaned = 0.00168189 Jy ! Total flux subtracted in 200 components = 0.00168189 Jy ! Clean residual min=-0.001556 max=0.002043 Jy/beam ! Clean residual mean=0.000005 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.0842541 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 183 components and 0.0842541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089535Jy sigma=0.000710 ! Fit after self-cal, rms=0.089508Jy sigma=0.000710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00047455 Jy ! Component: 100 - total flux cleaned = 0.0003377 Jy ! Component: 150 - total flux cleaned = 0.000117881 Jy ! Component: 200 - total flux cleaned = -2.76635e-05 Jy ! Total flux subtracted in 200 components = -2.76635e-05 Jy ! Clean residual min=-0.001605 max=0.002024 Jy/beam ! Clean residual mean=0.000005 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.0842264 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 197 components and 0.0842264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089480Jy sigma=0.000710 ! Fit after self-cal, rms=0.089454Jy sigma=0.000710 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089454Jy sigma=0.000710 ! Fit after self-cal, rms=0.088841Jy sigma=0.000710 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.955 mas, bmaj=24.91 mas, bpa=-13.87 degrees ! Estimated noise=855.358 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00116671 Jy ! Component: 100 - total flux cleaned = 0.00113055 Jy ! Component: 150 - total flux cleaned = 0.000990852 Jy ! Component: 200 - total flux cleaned = 0.000870886 Jy ! Total flux subtracted in 200 components = 0.000870886 Jy ! Clean residual min=-0.001734 max=0.002110 Jy/beam ! Clean residual mean=0.000006 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.0850973 Jy selfcal ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 241 components and 0.0850973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088816Jy sigma=0.000710 ! Fit after self-cal, rms=0.088786Jy sigma=0.000710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000161974 Jy ! Component: 100 - total flux cleaned = 3.72512e-05 Jy ! Component: 150 - total flux cleaned = -0.000101395 Jy ! Component: 200 - total flux cleaned = -0.000199511 Jy ! Total flux subtracted in 200 components = -0.000199511 Jy ! Clean residual min=-0.001716 max=0.002147 Jy/beam ! Clean residual mean=0.000005 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0848978 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 265 components and 0.0848978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088774Jy sigma=0.000710 ! Fit after self-cal, rms=0.088750Jy sigma=0.000710 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.539 mas, bmaj=17.58 mas, bpa=-21.79 degrees ! Estimated noise=730.044 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.539 x 17.58 at -21.79 degrees (North through East) ! Clean map min=-0.003663 max=0.058395 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.81 mas, bmaj=14.34 mas, bpa=-23.03 degrees ! Estimated noise=1338.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0442697 Jy ! Component: 100 - total flux cleaned = 0.0551373 Jy ! Component: 150 - total flux cleaned = 0.0616074 Jy ! Component: 200 - total flux cleaned = 0.0658653 Jy ! Total flux subtracted in 200 components = 0.0658653 Jy ! Clean residual min=-0.004081 max=0.004032 Jy/beam ! Clean residual mean=0.000005 rms=0.001119 Jy/beam ! Combined flux in latest and established models = 0.0658654 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0658654 Jy ! Inverting map and beam ! Estimated beam: bmin=3.539 mas, bmaj=17.58 mas, bpa=-21.79 degrees ! Estimated noise=730.044 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00749128 Jy ! Component: 100 - total flux cleaned = 0.0120702 Jy ! Component: 150 - total flux cleaned = 0.0147171 Jy ! Component: 200 - total flux cleaned = 0.0162533 Jy ! Total flux subtracted in 200 components = 0.0162533 Jy ! Clean residual min=-0.002444 max=0.002236 Jy/beam ! Clean residual mean=0.000004 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 0.0821187 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 89 components and 0.0821187 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.955 mas, bmaj=24.91 mas, bpa=-13.87 degrees ! Estimated noise=855.358 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215299 Jy ! Component: 100 - total flux cleaned = 0.00245627 Jy ! Component: 150 - total flux cleaned = 0.00264615 Jy ! Component: 200 - total flux cleaned = 0.00280687 Jy ! Total flux subtracted in 200 components = 0.00280687 Jy ! Clean residual min=-0.002318 max=0.002465 Jy/beam ! Clean residual mean=0.000005 rms=0.000671 Jy/beam ! Combined flux in latest and established models = 0.0849256 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.81086e-05 Jy ! Component: 100 - total flux cleaned = -8.71186e-05 Jy ! Component: 150 - total flux cleaned = -8.54413e-05 Jy ! Component: 200 - total flux cleaned = -0.000186271 Jy ! Total flux subtracted in 200 components = -0.000186271 Jy ! Clean residual min=-0.001997 max=0.002326 Jy/beam ! Clean residual mean=0.000004 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.0847393 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 158 components and 0.0847393 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.539 mas, bmaj=17.58 mas, bpa=-21.79 degrees ! Estimated noise=730.044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000148476 Jy ! Component: 100 - total flux cleaned = -0.000154256 Jy ! Component: 150 - total flux cleaned = -0.000229533 Jy ! Component: 200 - total flux cleaned = -0.000262887 Jy ! Total flux subtracted in 200 components = -0.000262887 Jy ! Clean residual min=-0.001780 max=0.001900 Jy/beam ! Clean residual mean=0.000001 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.0844764 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 185 components and 0.0844764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088766Jy sigma=0.000710 ! Fit after self-cal, rms=0.088746Jy sigma=0.000710 wmodel J0919-1847_S_2017_10_21_pus_map.mod ! Writing 185 model components to file: J0919-1847_S_2017_10_21_pus_map.mod wobs J0919-1847_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0919-1847_S_2017_10_21_pus_uvs.fits wwins J0919-1847_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J0919-1847_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000545998 Jy ! Component: 100 - total flux cleaned = 0.000751012 Jy ! Component: 150 - total flux cleaned = 0.000911807 Jy ! Component: 200 - total flux cleaned = 0.00083613 Jy ! Component: 250 - total flux cleaned = 0.000859856 Jy ! Component: 300 - total flux cleaned = 0.000904735 Jy ! Component: 350 - total flux cleaned = 0.000815893 Jy ! Component: 400 - total flux cleaned = 0.00083797 Jy ! Component: 450 - total flux cleaned = 0.000753872 Jy ! Component: 500 - total flux cleaned = 0.000712916 Jy ! Component: 550 - total flux cleaned = 0.000753143 Jy ! Component: 600 - total flux cleaned = 0.00071362 Jy ! Component: 650 - total flux cleaned = 0.000733055 Jy ! Component: 700 - total flux cleaned = 0.000713749 Jy ! Component: 750 - total flux cleaned = 0.000713918 Jy ! Component: 800 - total flux cleaned = 0.000732646 Jy ! Component: 850 - total flux cleaned = 0.000714451 Jy ! Component: 900 - total flux cleaned = 0.00074984 Jy ! Component: 950 - total flux cleaned = 0.000679532 Jy ! Component: 1000 - total flux cleaned = 0.000662421 Jy ! Component: 1050 - total flux cleaned = 0.000696704 Jy ! Component: 1100 - total flux cleaned = 0.000679797 Jy ! Component: 1150 - total flux cleaned = 0.000712641 Jy ! Component: 1200 - total flux cleaned = 0.000696298 Jy ! Component: 1250 - total flux cleaned = 0.000680282 Jy ! Component: 1300 - total flux cleaned = 0.000712178 Jy ! Component: 1350 - total flux cleaned = 0.000696614 Jy ! Component: 1400 - total flux cleaned = 0.000665435 Jy ! Component: 1450 - total flux cleaned = 0.000696023 Jy ! Component: 1500 - total flux cleaned = 0.000680792 Jy ! Component: 1550 - total flux cleaned = 0.000665973 Jy ! Component: 1600 - total flux cleaned = 0.000710148 Jy ! Component: 1650 - total flux cleaned = 0.000695609 Jy ! Component: 1700 - total flux cleaned = 0.000739027 Jy ! Component: 1750 - total flux cleaned = 0.000767389 Jy ! Component: 1800 - total flux cleaned = 0.000781487 Jy ! Component: 1850 - total flux cleaned = 0.00079531 Jy ! Component: 1900 - total flux cleaned = 0.000822942 Jy ! Component: 1950 - total flux cleaned = 0.000877309 Jy ! Component: 2000 - total flux cleaned = 0.000863746 Jy ! Component: 2050 - total flux cleaned = 0.000890506 Jy ! Component: 2100 - total flux cleaned = 0.000863934 Jy ! Component: 2150 - total flux cleaned = 0.000850841 Jy ! Component: 2200 - total flux cleaned = 0.000850892 Jy ! Component: 2250 - total flux cleaned = 0.00087654 Jy ! Component: 2300 - total flux cleaned = 0.000889214 Jy ! Component: 2350 - total flux cleaned = 0.000876505 Jy ! Component: 2400 - total flux cleaned = 0.000876493 Jy ! Component: 2450 - total flux cleaned = 0.000864193 Jy ! Component: 2500 - total flux cleaned = 0.000827631 Jy ! Component: 2550 - total flux cleaned = 0.000839906 Jy ! Component: 2600 - total flux cleaned = 0.000864105 Jy ! Component: 2650 - total flux cleaned = 0.000875983 Jy ! Component: 2700 - total flux cleaned = 0.000828559 Jy ! Component: 2750 - total flux cleaned = 0.000840334 Jy ! Component: 2800 - total flux cleaned = 0.000863485 Jy ! Component: 2850 - total flux cleaned = 0.000817379 Jy ! Component: 2900 - total flux cleaned = 0.000839998 Jy ! Component: 2950 - total flux cleaned = 0.000840008 Jy ! Component: 3000 - total flux cleaned = 0.00082859 Jy ! Component: 3050 - total flux cleaned = 0.000817439 Jy ! Component: 3100 - total flux cleaned = 0.000806432 Jy ! Component: 3150 - total flux cleaned = 0.000795511 Jy ! Component: 3200 - total flux cleaned = 0.000773832 Jy ! Component: 3250 - total flux cleaned = 0.000752146 Jy ! Component: 3300 - total flux cleaned = 0.000741255 Jy ! Component: 3350 - total flux cleaned = 0.000709212 Jy ! Component: 3400 - total flux cleaned = 0.000719838 Jy ! Component: 3450 - total flux cleaned = 0.000688209 Jy ! Component: 3500 - total flux cleaned = 0.000719619 Jy ! Component: 3550 - total flux cleaned = 0.000698817 Jy ! Component: 3600 - total flux cleaned = 0.000709071 Jy ! Component: 3650 - total flux cleaned = 0.000688475 Jy ! Component: 3700 - total flux cleaned = 0.000668056 Jy ! Component: 3750 - total flux cleaned = 0.000698469 Jy ! Component: 3800 - total flux cleaned = 0.000678381 Jy ! Component: 3850 - total flux cleaned = 0.000668297 Jy ! Component: 3900 - total flux cleaned = 0.000638407 Jy ! Component: 3950 - total flux cleaned = 0.000668135 Jy ! Component: 4000 - total flux cleaned = 0.000678034 Jy ! Component: 4050 - total flux cleaned = 0.000629113 Jy ! Total flux subtracted in 4096 components = 0.00066806 Jy ! Clean residual min=-0.000522 max=0.000576 Jy/beam ! Clean residual mean=0.000003 rms=0.000187 Jy/beam ! Combined flux in latest and established models = 0.0851445 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 476 components and 0.0851445 Jy ![Exited script file: muppet] wmap "J0919-1847_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.539 x 17.58 at -21.79 degrees (North through East) ! Clean map min=-0.0035219 max=0.059178 Jy/beam ! Writing clean map to FITS file: J0919-1847_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0591776 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000181391 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.919561 0.919561 1.83912 3.67825 7.35649 14.713 29.426 58.8519 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.539 x 17.58 at -21.79 degrees (North through East) ! Clean map min=-0.0035219 max=0.059178 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0919-1847_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:55:19 2019