! Started logfile: J0918-1205_S_2017_10_21_pus_uvs.log on Sat May 11 20:55:08 2019 obs J0918-1205_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0918-1205_S_2017_10_21_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.929358 visibilities/baseline/integration-bin. ! Found source: J0918-1205 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 15524 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0918-1205_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 39 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 211 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 96 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 818 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.908833Jy sigma=0.008178 ! Fit after self-cal, rms=0.883909Jy sigma=0.007949 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.952 mas, bmaj=14.62 mas, bpa=-20.17 degrees ! Estimated noise=1035.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0778247 Jy ! Component: 100 - total flux cleaned = 0.10813 Jy ! Total flux subtracted in 100 components = 0.10813 Jy ! Clean residual min=-0.007265 max=0.014768 Jy/beam ! Clean residual mean=-0.000112 rms=0.002866 Jy/beam ! Combined flux in latest and established models = 0.10813 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.10813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105326Jy sigma=0.000894 ! Fit after self-cal, rms=0.105194Jy sigma=0.000893 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.755 mas, bmaj=16.84 mas, bpa=-18.02 degrees ! Estimated noise=788.769 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0322324 Jy ! Component: 100 - total flux cleaned = 0.051547 Jy ! Component: 150 - total flux cleaned = 0.064479 Jy ! Component: 200 - total flux cleaned = 0.073443 Jy ! Total flux subtracted in 200 components = 0.073443 Jy ! Clean residual min=-0.005576 max=0.007486 Jy/beam ! Clean residual mean=-0.000019 rms=0.001884 Jy/beam ! Combined flux in latest and established models = 0.181573 Jy ! Performing phase self-cal ! Adding 111 model components to the UV plane model. ! The established model now contains 143 components and 0.181573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093164Jy sigma=0.000792 ! Fit after self-cal, rms=0.093036Jy sigma=0.000791 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.35 FD 0.84 HN 1.06 KP 1.14 ! LA 0.99 MK 1.02 NL 0.94 OV 0.95 ! PT 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 1.07 KP 1.04 ! LA 1.01 MK 0.98 NL 1.05 OV 0.94 ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.84 FD 0.94 HN 1.09 KP 1.08 ! LA 0.75 MK 1.08 NL 1.15 OV 0.86 ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.85 KP 1.00* ! LA 0.76 MK 1.00* NL 1.00* OV 1.00* ! PT 0.93 ! ! ! Fit before self-cal, rms=0.093036Jy sigma=0.000791 ! Fit after self-cal, rms=0.094084Jy sigma=0.000765 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.831 mas, bmaj=18.26 mas, bpa=-17.99 degrees ! Estimated noise=796.748 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000150653 Jy ! Component: 100 - total flux cleaned = -0.000359823 Jy ! Component: 150 - total flux cleaned = -0.000578364 Jy ! Component: 200 - total flux cleaned = -0.000728919 Jy ! Total flux subtracted in 200 components = -0.000728919 Jy ! Clean residual min=-0.002983 max=0.003394 Jy/beam ! Clean residual mean=0.000011 rms=0.000755 Jy/beam ! Combined flux in latest and established models = 0.180844 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 158 components and 0.180844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094031Jy sigma=0.000765 ! Fit after self-cal, rms=0.094194Jy sigma=0.000764 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094194Jy sigma=0.000764 ! Fit after self-cal, rms=0.094817Jy sigma=0.000763 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.82 mas, bmaj=18.47 mas, bpa=-17.89 degrees ! Estimated noise=795.546 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000140339 Jy ! Component: 100 - total flux cleaned = -0.000295543 Jy ! Component: 150 - total flux cleaned = -0.000398024 Jy ! Component: 200 - total flux cleaned = -0.000491082 Jy ! Total flux subtracted in 200 components = -0.000491082 Jy ! Clean residual min=-0.002571 max=0.003157 Jy/beam ! Clean residual mean=0.000013 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.180353 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 177 components and 0.180353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094786Jy sigma=0.000763 ! Fit after self-cal, rms=0.094815Jy sigma=0.000763 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15, -22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287052 Jy ! Component: 100 - total flux cleaned = 0.00380099 Jy ! Component: 150 - total flux cleaned = 0.00396975 Jy ! Component: 200 - total flux cleaned = 0.00416602 Jy ! Total flux subtracted in 200 components = 0.00416602 Jy ! Clean residual min=-0.002350 max=0.002390 Jy/beam ! Clean residual mean=0.000007 rms=0.000605 Jy/beam ! Combined flux in latest and established models = 0.184519 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 197 components and 0.184519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094697Jy sigma=0.000762 ! Fit after self-cal, rms=0.094693Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094693Jy sigma=0.000762 ! Fit after self-cal, rms=0.095159Jy sigma=0.000761 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=18.52 mas, bpa=-17.83 degrees ! Estimated noise=795.798 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135913 Jy ! Component: 100 - total flux cleaned = 0.00159985 Jy ! Component: 150 - total flux cleaned = 0.00176979 Jy ! Component: 200 - total flux cleaned = 0.00188745 Jy ! Total flux subtracted in 200 components = 0.00188745 Jy ! Clean residual min=-0.002311 max=0.002241 Jy/beam ! Clean residual mean=0.000007 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.186407 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 209 components and 0.186407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095110Jy sigma=0.000761 ! Fit after self-cal, rms=0.095117Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00023108 Jy ! Component: 100 - total flux cleaned = 0.000232759 Jy ! Component: 150 - total flux cleaned = 0.000198023 Jy ! Component: 200 - total flux cleaned = 0.000166183 Jy ! Total flux subtracted in 200 components = 0.000166183 Jy ! Clean residual min=-0.002305 max=0.002247 Jy/beam ! Clean residual mean=0.000007 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.186573 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 224 components and 0.186573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095089Jy sigma=0.000761 ! Fit after self-cal, rms=0.095088Jy sigma=0.000761 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095088Jy sigma=0.000761 ! Fit after self-cal, rms=0.095315Jy sigma=0.000761 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.87 mas, bmaj=21.46 mas, bpa=-11.74 degrees ! Estimated noise=912.083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185238 Jy ! Component: 100 - total flux cleaned = 0.000157377 Jy ! Component: 150 - total flux cleaned = 0.000133667 Jy ! Component: 200 - total flux cleaned = 0.000133788 Jy ! Total flux subtracted in 200 components = 0.000133788 Jy ! Clean residual min=-0.002112 max=0.002492 Jy/beam ! Clean residual mean=0.000011 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.186707 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 244 components and 0.186707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095303Jy sigma=0.000761 ! Fit after self-cal, rms=0.095304Jy sigma=0.000761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.93252e-06 Jy ! Component: 100 - total flux cleaned = -2.60966e-05 Jy ! Component: 150 - total flux cleaned = -4.59203e-05 Jy ! Component: 200 - total flux cleaned = -4.53786e-05 Jy ! Total flux subtracted in 200 components = -4.53786e-05 Jy ! Clean residual min=-0.002085 max=0.002471 Jy/beam ! Clean residual mean=0.000011 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.186661 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 249 components and 0.186661 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095295Jy sigma=0.000761 ! Fit after self-cal, rms=0.095296Jy sigma=0.000761 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=18.54 mas, bpa=-17.82 degrees ! Estimated noise=796.333 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.826 x 18.54 at -17.82 degrees (North through East) ! Clean map min=-0.0022254 max=0.10747 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.985 mas, bmaj=15.75 mas, bpa=-19.91 degrees ! Estimated noise=1088.62 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0808287 Jy ! Component: 100 - total flux cleaned = 0.112483 Jy ! Component: 150 - total flux cleaned = 0.130085 Jy ! Component: 200 - total flux cleaned = 0.141402 Jy ! Total flux subtracted in 200 components = 0.141402 Jy ! Clean residual min=-0.004367 max=0.006231 Jy/beam ! Clean residual mean=-0.000045 rms=0.001427 Jy/beam ! Combined flux in latest and established models = 0.141402 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 62 model components to the UV plane model. ! The established model now contains 62 components and 0.141402 Jy ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=18.54 mas, bpa=-17.82 degrees ! Estimated noise=796.333 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136386 Jy ! Component: 100 - total flux cleaned = 0.0215537 Jy ! Component: 150 - total flux cleaned = 0.0267555 Jy ! Component: 200 - total flux cleaned = 0.0306863 Jy ! Total flux subtracted in 200 components = 0.0306863 Jy ! Clean residual min=-0.002907 max=0.003249 Jy/beam ! Clean residual mean=0.000002 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.172088 Jy ! Adding 92 model components to the UV plane model. ! The established model now contains 147 components and 0.172088 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.87 mas, bmaj=21.46 mas, bpa=-11.74 degrees ! Estimated noise=912.083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038836 Jy ! Component: 100 - total flux cleaned = 0.0063811 Jy ! Component: 150 - total flux cleaned = 0.00832114 Jy ! Component: 200 - total flux cleaned = 0.0098966 Jy ! Total flux subtracted in 200 components = 0.0098966 Jy ! Clean residual min=-0.002295 max=0.002296 Jy/beam ! Clean residual mean=0.000011 rms=0.000712 Jy/beam ! Combined flux in latest and established models = 0.181985 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105091 Jy ! Component: 100 - total flux cleaned = 0.00184568 Jy ! Component: 150 - total flux cleaned = 0.00248375 Jy ! Component: 200 - total flux cleaned = 0.00274795 Jy ! Total flux subtracted in 200 components = 0.00274795 Jy ! Clean residual min=-0.002083 max=0.002404 Jy/beam ! Clean residual mean=0.000009 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.184733 Jy ! Adding 74 model components to the UV plane model. ! The established model now contains 216 components and 0.184733 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=18.54 mas, bpa=-17.82 degrees ! Estimated noise=796.333 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000560282 Jy ! Component: 100 - total flux cleaned = 0.000447395 Jy ! Component: 150 - total flux cleaned = 0.000444989 Jy ! Component: 200 - total flux cleaned = 0.000443899 Jy ! Total flux subtracted in 200 components = 0.000443899 Jy ! Clean residual min=-0.002130 max=0.002409 Jy/beam ! Clean residual mean=0.000005 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 0.185177 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 237 components and 0.185177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095434Jy sigma=0.000761 ! Fit after self-cal, rms=0.095352Jy sigma=0.000761 wmodel J0918-1205_S_2017_10_21_pus_map.mod ! Writing 237 model components to file: J0918-1205_S_2017_10_21_pus_map.mod wobs J0918-1205_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0918-1205_S_2017_10_21_pus_uvs.fits wwins J0918-1205_S_2017_10_21_pus_map.win ! wwins: Wrote 2 windows to J0918-1205_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000501221 Jy ! Component: 100 - total flux cleaned = 0.000611453 Jy ! Component: 150 - total flux cleaned = 0.000855207 Jy ! Component: 200 - total flux cleaned = 0.00115198 Jy ! Component: 250 - total flux cleaned = 0.00149826 Jy ! Component: 300 - total flux cleaned = 0.00170919 Jy ! Component: 350 - total flux cleaned = 0.00196901 Jy ! Component: 400 - total flux cleaned = 0.0021347 Jy ! Component: 450 - total flux cleaned = 0.00234882 Jy ! Component: 500 - total flux cleaned = 0.00255666 Jy ! Component: 550 - total flux cleaned = 0.00283452 Jy ! Component: 600 - total flux cleaned = 0.00305579 Jy ! Component: 650 - total flux cleaned = 0.00327136 Jy ! Component: 700 - total flux cleaned = 0.00345861 Jy ! Component: 750 - total flux cleaned = 0.00364166 Jy ! Component: 800 - total flux cleaned = 0.00373168 Jy ! Component: 850 - total flux cleaned = 0.00379792 Jy ! Component: 900 - total flux cleaned = 0.00386244 Jy ! Component: 950 - total flux cleaned = 0.00390465 Jy ! Component: 1000 - total flux cleaned = 0.00394618 Jy ! Component: 1050 - total flux cleaned = 0.00408895 Jy ! Component: 1100 - total flux cleaned = 0.00414864 Jy ! Component: 1150 - total flux cleaned = 0.00420758 Jy ! Component: 1200 - total flux cleaned = 0.00430444 Jy ! Component: 1250 - total flux cleaned = 0.00434259 Jy ! Component: 1300 - total flux cleaned = 0.00441788 Jy ! Component: 1350 - total flux cleaned = 0.00452919 Jy ! Component: 1400 - total flux cleaned = 0.00462036 Jy ! Component: 1450 - total flux cleaned = 0.00467433 Jy ! Component: 1500 - total flux cleaned = 0.00476301 Jy ! Component: 1550 - total flux cleaned = 0.00485095 Jy ! Component: 1600 - total flux cleaned = 0.00500651 Jy ! Component: 1650 - total flux cleaned = 0.00509202 Jy ! Component: 1700 - total flux cleaned = 0.00522701 Jy ! Component: 1750 - total flux cleaned = 0.00531032 Jy ! Component: 1800 - total flux cleaned = 0.00545838 Jy ! Component: 1850 - total flux cleaned = 0.00550704 Jy ! Component: 1900 - total flux cleaned = 0.00565175 Jy ! Component: 1950 - total flux cleaned = 0.00574712 Jy ! Component: 2000 - total flux cleaned = 0.00581009 Jy ! Component: 2050 - total flux cleaned = 0.00587232 Jy ! Component: 2100 - total flux cleaned = 0.00594928 Jy ! Component: 2150 - total flux cleaned = 0.00594918 Jy ! Component: 2200 - total flux cleaned = 0.0060397 Jy ! Component: 2250 - total flux cleaned = 0.00612911 Jy ! Component: 2300 - total flux cleaned = 0.00611445 Jy ! Component: 2350 - total flux cleaned = 0.00626113 Jy ! Component: 2400 - total flux cleaned = 0.00630468 Jy ! Component: 2450 - total flux cleaned = 0.0063623 Jy ! Component: 2500 - total flux cleaned = 0.006448 Jy ! Component: 2550 - total flux cleaned = 0.00651859 Jy ! Component: 2600 - total flux cleaned = 0.00660266 Jy ! Component: 2650 - total flux cleaned = 0.00660267 Jy ! Component: 2700 - total flux cleaned = 0.0066717 Jy ! Component: 2750 - total flux cleaned = 0.00672653 Jy ! Component: 2800 - total flux cleaned = 0.00675374 Jy ! Component: 2850 - total flux cleaned = 0.00679423 Jy ! Component: 2900 - total flux cleaned = 0.00684774 Jy ! Component: 2950 - total flux cleaned = 0.0068479 Jy ! Component: 3000 - total flux cleaned = 0.00683472 Jy ! Component: 3050 - total flux cleaned = 0.00691286 Jy ! Component: 3100 - total flux cleaned = 0.00688705 Jy ! Component: 3150 - total flux cleaned = 0.006964 Jy ! Component: 3200 - total flux cleaned = 0.0069768 Jy ! Component: 3250 - total flux cleaned = 0.00697662 Jy ! Component: 3300 - total flux cleaned = 0.00701422 Jy ! Component: 3350 - total flux cleaned = 0.00701422 Jy ! Component: 3400 - total flux cleaned = 0.0070265 Jy ! Component: 3450 - total flux cleaned = 0.00701434 Jy ! Component: 3500 - total flux cleaned = 0.00702646 Jy ! Component: 3550 - total flux cleaned = 0.00705078 Jy ! Component: 3600 - total flux cleaned = 0.00703877 Jy ! Component: 3650 - total flux cleaned = 0.00707456 Jy ! Component: 3700 - total flux cleaned = 0.00708639 Jy ! Component: 3750 - total flux cleaned = 0.00710984 Jy ! Component: 3800 - total flux cleaned = 0.00710976 Jy ! Component: 3850 - total flux cleaned = 0.00716748 Jy ! Component: 3900 - total flux cleaned = 0.00712158 Jy ! Component: 3950 - total flux cleaned = 0.00712164 Jy ! Component: 4000 - total flux cleaned = 0.00714418 Jy ! Component: 4050 - total flux cleaned = 0.00712169 Jy ! Total flux subtracted in 4096 components = 0.00715525 Jy ! Clean residual min=-0.000588 max=0.000611 Jy/beam ! Clean residual mean=0.000002 rms=0.000216 Jy/beam ! Combined flux in latest and established models = 0.192332 Jy keep ! Adding 263 model components to the UV plane model. ! The established model now contains 500 components and 0.192332 Jy ![Exited script file: muppet] wmap "J0918-1205_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.826 x 18.54 at -17.82 degrees (North through East) ! Clean map min=-0.0011856 max=0.10838 Jy/beam ! Writing clean map to FITS file: J0918-1205_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.108376 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000213712 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.591585 0.591585 1.18317 2.36634 4.73268 9.46535 18.9307 37.8614 75.7228 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.108 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.826 x 18.54 at -17.82 degrees (North through East) ! Clean map min=-0.0011856 max=0.10838 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0918-1205_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:55:13 2019