! Started logfile: J0915-3029_S_2017_06_10_pus_uvs.log on Mon May 6 14:49:53 2019 obs J0915-3029_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0915-3029_S_2017_06_10_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.739655 visibilities/baseline/integration-bin. ! Found source: J0915-3029 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 15444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0915-3029_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 216 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 158 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 625 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.985745Jy sigma=0.006711 ! Fit after self-cal, rms=0.940390Jy sigma=0.006436 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.351 mas, bmaj=6.835 mas, bpa=-8.069 degrees ! Estimated noise=1895.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0461513 Jy ! Component: 100 - total flux cleaned = 0.0589005 Jy ! Total flux subtracted in 100 components = 0.0589005 Jy ! Clean residual min=-0.006115 max=0.006723 Jy/beam ! Clean residual mean=-0.000003 rms=0.001613 Jy/beam ! Combined flux in latest and established models = 0.0589005 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0589005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104629Jy sigma=0.000663 ! Fit after self-cal, rms=0.103846Jy sigma=0.000659 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.922 mas, bmaj=8.646 mas, bpa=-9.347 degrees ! Estimated noise=968.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0117159 Jy ! Component: 100 - total flux cleaned = 0.0175555 Jy ! Component: 150 - total flux cleaned = 0.0206269 Jy ! Component: 200 - total flux cleaned = 0.022268 Jy ! Total flux subtracted in 200 components = 0.022268 Jy ! Clean residual min=-0.002591 max=0.002903 Jy/beam ! Clean residual mean=-0.000019 rms=0.000773 Jy/beam ! Combined flux in latest and established models = 0.0811685 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 35 components and 0.0811685 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102672Jy sigma=0.000650 ! Fit after self-cal, rms=0.102566Jy sigma=0.000649 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.03 KP 1.05 ! LA 1.01 MK 1.10 NL 0.97 OV 1.01 ! PT 1.03 SC 1.08 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.01 KP 0.96 ! LA 0.94 MK 1.12 NL 1.09 OV 1.06 ! PT 0.98 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 0.98 KP 0.99 ! LA 0.93 MK 0.99 NL 1.01 OV 1.00 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 0.88 KP 1.00* ! LA 0.90 MK 0.96 NL 1.00* OV 1.00* ! PT 0.94 SC 1.00* ! ! ! Fit before self-cal, rms=0.102566Jy sigma=0.000649 ! Fit after self-cal, rms=0.102898Jy sigma=0.000648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=8.829 mas, bpa=-9.398 degrees ! Estimated noise=971.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000424757 Jy ! Component: 100 - total flux cleaned = 0.000545986 Jy ! Component: 150 - total flux cleaned = 0.000581632 Jy ! Component: 200 - total flux cleaned = 0.000613238 Jy ! Total flux subtracted in 200 components = 0.000613238 Jy ! Clean residual min=-0.002732 max=0.002893 Jy/beam ! Clean residual mean=-0.000008 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.0817818 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 43 components and 0.0817818 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102867Jy sigma=0.000648 ! Fit after self-cal, rms=0.102870Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102870Jy sigma=0.000647 ! Fit after self-cal, rms=0.102729Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.973 mas, bmaj=8.823 mas, bpa=-9.634 degrees ! Estimated noise=975.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000454694 Jy ! Component: 100 - total flux cleaned = 0.000544185 Jy ! Component: 150 - total flux cleaned = 0.000624355 Jy ! Component: 200 - total flux cleaned = 0.000672934 Jy ! Total flux subtracted in 200 components = 0.000672934 Jy ! Clean residual min=-0.002562 max=0.002835 Jy/beam ! Clean residual mean=-0.000011 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.0824547 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 47 components and 0.0824547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102711Jy sigma=0.000647 ! Fit after self-cal, rms=0.102691Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-20.5, 58). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000972572 Jy ! Component: 100 - total flux cleaned = 0.0010957 Jy ! Component: 150 - total flux cleaned = 0.00109487 Jy ! Component: 200 - total flux cleaned = 0.00113869 Jy ! Total flux subtracted in 200 components = 0.00113869 Jy ! Clean residual min=-0.002483 max=0.002448 Jy/beam ! Clean residual mean=-0.000007 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.0835934 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 62 components and 0.0835934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102605Jy sigma=0.000646 ! Fit after self-cal, rms=0.102567Jy sigma=0.000646 ! Inverting map ! Added new window around map position (49.5, 59). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00227204 Jy ! Component: 100 - total flux cleaned = 0.00273478 Jy ! Component: 150 - total flux cleaned = 0.00278489 Jy ! Component: 200 - total flux cleaned = 0.00282905 Jy ! Total flux subtracted in 200 components = 0.00282905 Jy ! Clean residual min=-0.002337 max=0.002388 Jy/beam ! Clean residual mean=-0.000013 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.0864225 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 75 components and 0.0864225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102492Jy sigma=0.000646 ! Fit after self-cal, rms=0.102453Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102453Jy sigma=0.000646 ! Fit after self-cal, rms=0.100564Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.951 mas, bmaj=8.799 mas, bpa=-9.904 degrees ! Estimated noise=961.687 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115467 Jy ! Component: 100 - total flux cleaned = 0.00124867 Jy ! Component: 150 - total flux cleaned = 0.00141733 Jy ! Component: 200 - total flux cleaned = 0.00153455 Jy ! Total flux subtracted in 200 components = 0.00153455 Jy ! Clean residual min=-0.002156 max=0.002352 Jy/beam ! Clean residual mean=-0.000016 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.087957 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 82 components and 0.087957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100521Jy sigma=0.000645 ! Fit after self-cal, rms=0.100485Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000453514 Jy ! Component: 100 - total flux cleaned = 0.000496553 Jy ! Component: 150 - total flux cleaned = 0.000574261 Jy ! Component: 200 - total flux cleaned = 0.000645175 Jy ! Total flux subtracted in 200 components = 0.000645175 Jy ! Clean residual min=-0.002123 max=0.002295 Jy/beam ! Clean residual mean=-0.000015 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.0886022 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 89 components and 0.0886022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100453Jy sigma=0.000645 ! Fit after self-cal, rms=0.100435Jy sigma=0.000645 ! Inverting map ! Added new window around map position (-16, -13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155766 Jy ! Component: 100 - total flux cleaned = 0.00237289 Jy ! Component: 150 - total flux cleaned = 0.00273735 Jy ! Component: 200 - total flux cleaned = 0.00288207 Jy ! Total flux subtracted in 200 components = 0.00288207 Jy ! Clean residual min=-0.002128 max=0.002178 Jy/beam ! Clean residual mean=-0.000012 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.0914842 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 104 components and 0.0914842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100382Jy sigma=0.000645 ! Fit after self-cal, rms=0.100346Jy sigma=0.000644 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100346Jy sigma=0.000644 ! Fit after self-cal, rms=0.099482Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.658 mas, bmaj=22.54 mas, bpa=-3.099 degrees ! Estimated noise=1214.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124537 Jy ! Component: 100 - total flux cleaned = 0.00209365 Jy ! Component: 150 - total flux cleaned = 0.00250446 Jy ! Component: 200 - total flux cleaned = 0.00281369 Jy ! Total flux subtracted in 200 components = 0.00281369 Jy ! Clean residual min=-0.002035 max=0.002028 Jy/beam ! Clean residual mean=-0.000029 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 0.0942979 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 116 components and 0.0942979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099464Jy sigma=0.000644 ! Fit after self-cal, rms=0.099449Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000490666 Jy ! Component: 100 - total flux cleaned = 0.000725052 Jy ! Component: 150 - total flux cleaned = 0.00078814 Jy ! Component: 200 - total flux cleaned = 0.000864632 Jy ! Total flux subtracted in 200 components = 0.000864632 Jy ! Clean residual min=-0.001997 max=0.002022 Jy/beam ! Clean residual mean=-0.000028 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.0951626 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 124 components and 0.0951626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099440Jy sigma=0.000644 ! Fit after self-cal, rms=0.099439Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=8.803 mas, bpa=-10.19 degrees ! Estimated noise=954.543 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.934 x 8.803 at -10.19 degrees (North through East) ! Clean map min=-0.0027746 max=0.060559 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.36 mas, bmaj=6.908 mas, bpa=-8.996 degrees ! Estimated noise=1882 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0460653 Jy ! Component: 100 - total flux cleaned = 0.0597625 Jy ! Component: 150 - total flux cleaned = 0.0654839 Jy ! Component: 200 - total flux cleaned = 0.0693228 Jy ! Total flux subtracted in 200 components = 0.0693228 Jy ! Clean residual min=-0.005421 max=0.006387 Jy/beam ! Clean residual mean=-0.000001 rms=0.001507 Jy/beam ! Combined flux in latest and established models = 0.0693228 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0693228 Jy ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=8.803 mas, bpa=-10.19 degrees ! Estimated noise=954.543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00785477 Jy ! Component: 100 - total flux cleaned = 0.0125425 Jy ! Component: 150 - total flux cleaned = 0.0158897 Jy ! Component: 200 - total flux cleaned = 0.0179809 Jy ! Total flux subtracted in 200 components = 0.0179809 Jy ! Clean residual min=-0.002638 max=0.002741 Jy/beam ! Clean residual mean=-0.000019 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.0873038 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 47 components and 0.0873038 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.658 mas, bmaj=22.54 mas, bpa=-3.099 degrees ! Estimated noise=1214.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00265628 Jy ! Component: 100 - total flux cleaned = 0.00390649 Jy ! Component: 150 - total flux cleaned = 0.00507117 Jy ! Component: 200 - total flux cleaned = 0.00604061 Jy ! Total flux subtracted in 200 components = 0.00604061 Jy ! Clean residual min=-0.002394 max=0.002121 Jy/beam ! Clean residual mean=-0.000025 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.0933444 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000815531 Jy ! Component: 100 - total flux cleaned = 0.00150314 Jy ! Component: 150 - total flux cleaned = 0.00185533 Jy ! Component: 200 - total flux cleaned = 0.00211019 Jy ! Total flux subtracted in 200 components = 0.00211019 Jy ! Clean residual min=-0.002246 max=0.002110 Jy/beam ! Clean residual mean=-0.000024 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.0954546 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 83 components and 0.0954546 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.934 mas, bmaj=8.803 mas, bpa=-10.19 degrees ! Estimated noise=954.543 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000128345 Jy ! Component: 100 - total flux cleaned = -0.000125198 Jy ! Component: 150 - total flux cleaned = -0.000126958 Jy ! Component: 200 - total flux cleaned = -0.000128258 Jy ! Total flux subtracted in 200 components = -0.000128258 Jy ! Clean residual min=-0.002006 max=0.002192 Jy/beam ! Clean residual mean=-0.000010 rms=0.000507 Jy/beam ! Combined flux in latest and established models = 0.0953263 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 104 components and 0.0953263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099470Jy sigma=0.000644 ! Fit after self-cal, rms=0.099457Jy sigma=0.000644 wmodel J0915-3029_S_2017_06_10_pus_map.mod ! Writing 104 model components to file: J0915-3029_S_2017_06_10_pus_map.mod wobs J0915-3029_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0915-3029_S_2017_06_10_pus_uvs.fits wwins J0915-3029_S_2017_06_10_pus_map.win ! wwins: Wrote 5 windows to J0915-3029_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000346291 Jy ! Component: 100 - total flux cleaned = -0.00062237 Jy ! Component: 150 - total flux cleaned = -0.000719861 Jy ! Component: 200 - total flux cleaned = -0.000811654 Jy ! Component: 250 - total flux cleaned = -0.000870243 Jy ! Component: 300 - total flux cleaned = -0.0010119 Jy ! Component: 350 - total flux cleaned = -0.00109456 Jy ! Component: 400 - total flux cleaned = -0.00133523 Jy ! Component: 450 - total flux cleaned = -0.00151732 Jy ! Component: 500 - total flux cleaned = -0.00169545 Jy ! Component: 550 - total flux cleaned = -0.00184527 Jy ! Component: 600 - total flux cleaned = -0.00196796 Jy ! Component: 650 - total flux cleaned = -0.00213472 Jy ! Component: 700 - total flux cleaned = -0.00218117 Jy ! Component: 750 - total flux cleaned = -0.00222746 Jy ! Component: 800 - total flux cleaned = -0.0023175 Jy ! Component: 850 - total flux cleaned = -0.00242791 Jy ! Component: 900 - total flux cleaned = -0.00240602 Jy ! Component: 950 - total flux cleaned = -0.00249191 Jy ! Component: 1000 - total flux cleaned = -0.00251306 Jy ! Component: 1050 - total flux cleaned = -0.00259583 Jy ! Component: 1100 - total flux cleaned = -0.00263632 Jy ! Component: 1150 - total flux cleaned = -0.00265627 Jy ! Component: 1200 - total flux cleaned = -0.00271556 Jy ! Component: 1250 - total flux cleaned = -0.00271546 Jy ! Component: 1300 - total flux cleaned = -0.00267722 Jy ! Component: 1350 - total flux cleaned = -0.0026015 Jy ! Component: 1400 - total flux cleaned = -0.00258292 Jy ! Component: 1450 - total flux cleaned = -0.00254575 Jy ! Component: 1500 - total flux cleaned = -0.00247282 Jy ! Component: 1550 - total flux cleaned = -0.00245473 Jy ! Component: 1600 - total flux cleaned = -0.00240127 Jy ! Component: 1650 - total flux cleaned = -0.00238383 Jy ! Component: 1700 - total flux cleaned = -0.00234932 Jy ! Component: 1750 - total flux cleaned = -0.00231516 Jy ! Component: 1800 - total flux cleaned = -0.00233231 Jy ! Component: 1850 - total flux cleaned = -0.0022991 Jy ! Component: 1900 - total flux cleaned = -0.0023159 Jy ! Component: 1950 - total flux cleaned = -0.00234871 Jy ! Component: 2000 - total flux cleaned = -0.00239726 Jy ! Component: 2050 - total flux cleaned = -0.00234922 Jy ! Component: 2100 - total flux cleaned = -0.00241286 Jy ! Component: 2150 - total flux cleaned = -0.00246016 Jy ! Component: 2200 - total flux cleaned = -0.00241318 Jy ! Component: 2250 - total flux cleaned = -0.0024746 Jy ! Component: 2300 - total flux cleaned = -0.00247446 Jy ! Component: 2350 - total flux cleaned = -0.00252001 Jy ! Component: 2400 - total flux cleaned = -0.00253506 Jy ! Component: 2450 - total flux cleaned = -0.00254993 Jy ! Component: 2500 - total flux cleaned = -0.00256484 Jy ! Component: 2550 - total flux cleaned = -0.00256499 Jy ! Component: 2600 - total flux cleaned = -0.00259409 Jy ! Component: 2650 - total flux cleaned = -0.00262306 Jy ! Component: 2700 - total flux cleaned = -0.00260867 Jy ! Component: 2750 - total flux cleaned = -0.00262305 Jy ! Component: 2800 - total flux cleaned = -0.00259471 Jy ! Component: 2850 - total flux cleaned = -0.0026227 Jy ! Component: 2900 - total flux cleaned = -0.00260881 Jy ! Component: 2950 - total flux cleaned = -0.00263636 Jy ! Component: 3000 - total flux cleaned = -0.00264999 Jy ! Component: 3050 - total flux cleaned = -0.00260903 Jy ! Component: 3100 - total flux cleaned = -0.00266329 Jy ! Component: 3150 - total flux cleaned = -0.00264994 Jy ! Component: 3200 - total flux cleaned = -0.00264983 Jy ! Component: 3250 - total flux cleaned = -0.00267629 Jy ! Component: 3300 - total flux cleaned = -0.00263674 Jy ! Component: 3350 - total flux cleaned = -0.00255827 Jy ! Component: 3400 - total flux cleaned = -0.0025713 Jy ! Component: 3450 - total flux cleaned = -0.00251963 Jy ! Component: 3500 - total flux cleaned = -0.00245552 Jy ! Component: 3550 - total flux cleaned = -0.00239183 Jy ! Component: 3600 - total flux cleaned = -0.0023665 Jy ! Component: 3650 - total flux cleaned = -0.00226562 Jy ! Component: 3700 - total flux cleaned = -0.00224063 Jy ! Component: 3750 - total flux cleaned = -0.00220319 Jy ! Component: 3800 - total flux cleaned = -0.00215366 Jy ! Component: 3850 - total flux cleaned = -0.00207964 Jy ! Component: 3900 - total flux cleaned = -0.00200619 Jy ! Component: 3950 - total flux cleaned = -0.00196959 Jy ! Component: 4000 - total flux cleaned = -0.00188465 Jy ! Component: 4050 - total flux cleaned = -0.00180017 Jy ! Total flux subtracted in 4096 components = -0.00174011 Jy ! Clean residual min=-0.000672 max=0.000700 Jy/beam ! Clean residual mean=-0.000000 rms=0.000214 Jy/beam ! Combined flux in latest and established models = 0.0935862 Jy keep ! Adding 236 model components to the UV plane model. ! The established model now contains 340 components and 0.0935862 Jy ![Exited script file: muppet] wmap "J0915-3029_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.934 x 8.803 at -10.19 degrees (North through East) ! Clean map min=-0.0022385 max=0.060112 Jy/beam ! Writing clean map to FITS file: J0915-3029_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0601119 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000208674 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04143 1.04143 2.08285 4.16571 8.33142 16.6628 33.3257 66.6513 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.934 x 8.803 at -10.19 degrees (North through East) ! Clean map min=-0.0022385 max=0.060112 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0915-3029_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:49:58 2019