! Started logfile: J0915-0429_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:38:03 2019 obs J0915-0429_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0915-0429_S_2017_03_27_pus_uva.fits ! AN table 1: 173 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.979191 visibilities/baseline/integration-bin. ! Found source: J0915-0429 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 30492 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0915-0429_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 495 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.937132Jy sigma=0.007367 ! Fit after self-cal, rms=0.920615Jy sigma=0.007258 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.697 mas, bmaj=6.794 mas, bpa=-2.699 degrees ! Estimated noise=809.927 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0593912 Jy ! Component: 100 - total flux cleaned = 0.0773127 Jy ! Total flux subtracted in 100 components = 0.0773127 Jy ! Clean residual min=-0.004177 max=0.014533 Jy/beam ! Clean residual mean=-0.000001 rms=0.001365 Jy/beam ! Combined flux in latest and established models = 0.0773127 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0773127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099712Jy sigma=0.000722 ! Fit after self-cal, rms=0.099644Jy sigma=0.000721 ! Inverting map ! Added new window around map position (-5, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138514 Jy ! Component: 100 - total flux cleaned = 0.0222 Jy ! Total flux subtracted in 100 components = 0.0222 Jy ! Clean residual min=-0.003222 max=0.005259 Jy/beam ! Clean residual mean=-0.000002 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 0.0995127 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 30 components and 0.0995127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096773Jy sigma=0.000695 ! Fit after self-cal, rms=0.096488Jy sigma=0.000693 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00758403 Jy ! Component: 100 - total flux cleaned = 0.012076 Jy ! Total flux subtracted in 100 components = 0.012076 Jy ! Clean residual min=-0.002675 max=0.003266 Jy/beam ! Clean residual mean=-0.000002 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.111589 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 40 components and 0.111589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095575Jy sigma=0.000685 ! Fit after self-cal, rms=0.095504Jy sigma=0.000684 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00416293 Jy ! Component: 100 - total flux cleaned = 0.00678082 Jy ! Total flux subtracted in 100 components = 0.00678082 Jy ! Clean residual min=-0.002448 max=0.003044 Jy/beam ! Clean residual mean=-0.000002 rms=0.000652 Jy/beam ! Combined flux in latest and established models = 0.11837 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 55 components and 0.11837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095200Jy sigma=0.000682 ! Fit after self-cal, rms=0.095181Jy sigma=0.000681 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.227 mas, bmaj=7.761 mas, bpa=-2.125 degrees ! Estimated noise=558.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044177 Jy ! Component: 100 - total flux cleaned = 0.00722937 Jy ! Component: 150 - total flux cleaned = 0.00926812 Jy ! Component: 200 - total flux cleaned = 0.0107341 Jy ! Total flux subtracted in 200 components = 0.0107341 Jy ! Clean residual min=-0.001816 max=0.002116 Jy/beam ! Clean residual mean=0.000001 rms=0.000500 Jy/beam ! Combined flux in latest and established models = 0.129104 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 80 components and 0.129104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094937Jy sigma=0.000679 ! Fit after self-cal, rms=0.094913Jy sigma=0.000679 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.91 HN 1.00 KP 1.04 ! LA 0.99 MK 0.98 NL 1.00 OV 1.04 ! PT 1.00 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.94 HN 1.06 KP 1.00 ! LA 0.95 MK 1.01 NL 1.06 OV 1.08 ! PT 0.98 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.00 HN 0.98 KP 1.00 ! LA 1.05 MK 1.06 NL 0.98 OV 0.97 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 0.93 KP 1.00* ! LA 0.94 MK 1.02 NL 1.00* OV 0.98 ! PT 0.99 SC 1.14 ! ! ! Fit before self-cal, rms=0.094913Jy sigma=0.000679 ! Fit after self-cal, rms=0.094388Jy sigma=0.000678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=7.771 mas, bpa=-1.903 degrees ! Estimated noise=554.805 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000801207 Jy ! Component: 100 - total flux cleaned = 0.000854627 Jy ! Component: 150 - total flux cleaned = 0.000976013 Jy ! Component: 200 - total flux cleaned = 0.00107972 Jy ! Total flux subtracted in 200 components = 0.00107972 Jy ! Clean residual min=-0.001469 max=0.001968 Jy/beam ! Clean residual mean=-0.000002 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.130183 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 101 components and 0.130183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094344Jy sigma=0.000677 ! Fit after self-cal, rms=0.094341Jy sigma=0.000677 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094341Jy sigma=0.000677 ! Fit after self-cal, rms=0.095348Jy sigma=0.000676 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.248 mas, bmaj=7.771 mas, bpa=-1.942 degrees ! Estimated noise=555.518 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000617644 Jy ! Component: 100 - total flux cleaned = 0.000779333 Jy ! Component: 150 - total flux cleaned = 0.00083253 Jy ! Component: 200 - total flux cleaned = 0.000879197 Jy ! Total flux subtracted in 200 components = 0.000879197 Jy ! Clean residual min=-0.001447 max=0.001700 Jy/beam ! Clean residual mean=-0.000001 rms=0.000381 Jy/beam ! Combined flux in latest and established models = 0.131063 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 112 components and 0.131063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095327Jy sigma=0.000676 ! Fit after self-cal, rms=0.095363Jy sigma=0.000676 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-125.5, 123). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126002 Jy ! Component: 100 - total flux cleaned = 0.00154105 Jy ! Component: 150 - total flux cleaned = 0.001752 Jy ! Component: 200 - total flux cleaned = 0.00184709 Jy ! Total flux subtracted in 200 components = 0.00184709 Jy ! Clean residual min=-0.001483 max=0.001604 Jy/beam ! Clean residual mean=-0.000001 rms=0.000371 Jy/beam ! Combined flux in latest and established models = 0.13291 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 128 components and 0.13291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095335Jy sigma=0.000676 ! Fit after self-cal, rms=0.095332Jy sigma=0.000676 ! Inverting map ! Added new window around map position (-21, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133896 Jy ! Component: 100 - total flux cleaned = 0.00174646 Jy ! Component: 150 - total flux cleaned = 0.0020037 Jy ! Component: 200 - total flux cleaned = 0.00221068 Jy ! Total flux subtracted in 200 components = 0.00221068 Jy ! Clean residual min=-0.001482 max=0.001387 Jy/beam ! Clean residual mean=-0.000002 rms=0.000357 Jy/beam ! Combined flux in latest and established models = 0.13512 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 145 components and 0.13512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095308Jy sigma=0.000676 ! Fit after self-cal, rms=0.095309Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095309Jy sigma=0.000675 ! Fit after self-cal, rms=0.096196Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=7.776 mas, bpa=-1.973 degrees ! Estimated noise=555.694 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000442805 Jy ! Component: 100 - total flux cleaned = 0.000467929 Jy ! Component: 150 - total flux cleaned = 0.000512189 Jy ! Component: 200 - total flux cleaned = 0.000552897 Jy ! Total flux subtracted in 200 components = 0.000552897 Jy ! Clean residual min=-0.001404 max=0.001444 Jy/beam ! Clean residual mean=-0.000001 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.135673 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 156 components and 0.135673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096183Jy sigma=0.000675 ! Fit after self-cal, rms=0.096206Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017663 Jy ! Component: 100 - total flux cleaned = 0.000216282 Jy ! Component: 150 - total flux cleaned = 0.000272768 Jy ! Component: 200 - total flux cleaned = 0.000326366 Jy ! Total flux subtracted in 200 components = 0.000326366 Jy ! Clean residual min=-0.001416 max=0.001433 Jy/beam ! Clean residual mean=-0.000001 rms=0.000342 Jy/beam ! Combined flux in latest and established models = 0.136 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 161 components and 0.136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096198Jy sigma=0.000675 ! Fit after self-cal, rms=0.096199Jy sigma=0.000675 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096199Jy sigma=0.000675 ! Fit after self-cal, rms=0.096577Jy sigma=0.000675 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.457 mas, bmaj=12.69 mas, bpa=2.315 degrees ! Estimated noise=695.717 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00082911 Jy ! Component: 100 - total flux cleaned = 0.0011393 Jy ! Component: 150 - total flux cleaned = 0.00130711 Jy ! Component: 200 - total flux cleaned = 0.00139561 Jy ! Total flux subtracted in 200 components = 0.00139561 Jy ! Clean residual min=-0.001708 max=0.001625 Jy/beam ! Clean residual mean=-0.000001 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.137395 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 173 components and 0.137395 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096574Jy sigma=0.000675 ! Fit after self-cal, rms=0.096580Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000141444 Jy ! Component: 100 - total flux cleaned = 0.000254995 Jy ! Component: 150 - total flux cleaned = 0.000266351 Jy ! Component: 200 - total flux cleaned = 0.000266848 Jy ! Total flux subtracted in 200 components = 0.000266848 Jy ! Clean residual min=-0.001710 max=0.001611 Jy/beam ! Clean residual mean=-0.000001 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.137662 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 179 components and 0.137662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096579Jy sigma=0.000675 ! Fit after self-cal, rms=0.096580Jy sigma=0.000675 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=7.779 mas, bpa=-1.98 degrees ! Estimated noise=556.262 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.256 x 7.779 at -1.98 degrees (North through East) ! Clean map min=-0.0013788 max=0.077859 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.722 mas, bmaj=6.824 mas, bpa=-2.681 degrees ! Estimated noise=809.347 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0584668 Jy ! Component: 100 - total flux cleaned = 0.0810992 Jy ! Component: 150 - total flux cleaned = 0.0951782 Jy ! Component: 200 - total flux cleaned = 0.104245 Jy ! Total flux subtracted in 200 components = 0.104245 Jy ! Clean residual min=-0.002825 max=0.004835 Jy/beam ! Clean residual mean=0.000000 rms=0.000785 Jy/beam ! Combined flux in latest and established models = 0.104245 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.104245 Jy ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=7.779 mas, bpa=-1.98 degrees ! Estimated noise=556.262 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00931799 Jy ! Component: 100 - total flux cleaned = 0.015107 Jy ! Component: 150 - total flux cleaned = 0.0191111 Jy ! Component: 200 - total flux cleaned = 0.0220987 Jy ! Total flux subtracted in 200 components = 0.0220987 Jy ! Clean residual min=-0.001788 max=0.001815 Jy/beam ! Clean residual mean=0.000002 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.126344 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 60 components and 0.126344 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.457 mas, bmaj=12.69 mas, bpa=2.315 degrees ! Estimated noise=695.717 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00353078 Jy ! Component: 100 - total flux cleaned = 0.00574242 Jy ! Component: 150 - total flux cleaned = 0.00733595 Jy ! Component: 200 - total flux cleaned = 0.00851484 Jy ! Total flux subtracted in 200 components = 0.00851484 Jy ! Clean residual min=-0.001606 max=0.001554 Jy/beam ! Clean residual mean=-0.000000 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 0.134859 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000886205 Jy ! Component: 100 - total flux cleaned = 0.00156162 Jy ! Component: 150 - total flux cleaned = 0.00182979 Jy ! Component: 200 - total flux cleaned = 0.00192943 Jy ! Total flux subtracted in 200 components = 0.00192943 Jy ! Clean residual min=-0.001626 max=0.001589 Jy/beam ! Clean residual mean=-0.000001 rms=0.000411 Jy/beam ! Combined flux in latest and established models = 0.136788 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 132 components and 0.136788 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=7.779 mas, bpa=-1.98 degrees ! Estimated noise=556.262 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153746 Jy ! Component: 100 - total flux cleaned = 0.000155684 Jy ! Component: 150 - total flux cleaned = 0.00011853 Jy ! Component: 200 - total flux cleaned = 0.000184641 Jy ! Total flux subtracted in 200 components = 0.000184641 Jy ! Clean residual min=-0.001402 max=0.001549 Jy/beam ! Clean residual mean=-0.000001 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.136973 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 156 components and 0.136973 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096629Jy sigma=0.000675 ! Fit after self-cal, rms=0.096613Jy sigma=0.000675 wmodel J0915-0429_S_2017_03_27_pus_map.mod ! Writing 156 model components to file: J0915-0429_S_2017_03_27_pus_map.mod wobs J0915-0429_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0915-0429_S_2017_03_27_pus_uvs.fits wwins J0915-0429_S_2017_03_27_pus_map.win ! wwins: Wrote 5 windows to J0915-0429_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -5.26397e-05 Jy ! Component: 100 - total flux cleaned = -2.81401e-05 Jy ! Component: 150 - total flux cleaned = 8.95302e-05 Jy ! Component: 200 - total flux cleaned = 0.000247983 Jy ! Component: 250 - total flux cleaned = 0.000270386 Jy ! Component: 300 - total flux cleaned = 0.000376526 Jy ! Component: 350 - total flux cleaned = 0.000500374 Jy ! Component: 400 - total flux cleaned = 0.000601571 Jy ! Component: 450 - total flux cleaned = 0.000700456 Jy ! Component: 500 - total flux cleaned = 0.000739434 Jy ! Component: 550 - total flux cleaned = 0.000853466 Jy ! Component: 600 - total flux cleaned = 0.000815859 Jy ! Component: 650 - total flux cleaned = 0.000852895 Jy ! Component: 700 - total flux cleaned = 0.000871002 Jy ! Component: 750 - total flux cleaned = 0.000853094 Jy ! Component: 800 - total flux cleaned = 0.000765239 Jy ! Component: 850 - total flux cleaned = 0.000800282 Jy ! Component: 900 - total flux cleaned = 0.000817467 Jy ! Component: 950 - total flux cleaned = 0.000749556 Jy ! Component: 1000 - total flux cleaned = 0.000766182 Jy ! Component: 1050 - total flux cleaned = 0.000799218 Jy ! Component: 1100 - total flux cleaned = 0.000815831 Jy ! Component: 1150 - total flux cleaned = 0.000815783 Jy ! Component: 1200 - total flux cleaned = 0.00081589 Jy ! Component: 1250 - total flux cleaned = 0.000784398 Jy ! Component: 1300 - total flux cleaned = 0.000784603 Jy ! Component: 1350 - total flux cleaned = 0.000737892 Jy ! Component: 1400 - total flux cleaned = 0.000691741 Jy ! Component: 1450 - total flux cleaned = 0.000661522 Jy ! Component: 1500 - total flux cleaned = 0.000661645 Jy ! Component: 1550 - total flux cleaned = 0.000617113 Jy ! Component: 1600 - total flux cleaned = 0.000602486 Jy ! Component: 1650 - total flux cleaned = 0.000646508 Jy ! Component: 1700 - total flux cleaned = 0.000718903 Jy ! Component: 1750 - total flux cleaned = 0.000675561 Jy ! Component: 1800 - total flux cleaned = 0.000661496 Jy ! Component: 1850 - total flux cleaned = 0.000689616 Jy ! Component: 1900 - total flux cleaned = 0.000648009 Jy ! Component: 1950 - total flux cleaned = 0.000786905 Jy ! Component: 2000 - total flux cleaned = 0.000745271 Jy ! Component: 2050 - total flux cleaned = 0.000758806 Jy ! Component: 2100 - total flux cleaned = 0.000758617 Jy ! Component: 2150 - total flux cleaned = 0.000825727 Jy ! Component: 2200 - total flux cleaned = 0.000812091 Jy ! Component: 2250 - total flux cleaned = 0.000798798 Jy ! Component: 2300 - total flux cleaned = 0.000811861 Jy ! Component: 2350 - total flux cleaned = 0.000798908 Jy ! Component: 2400 - total flux cleaned = 0.000876833 Jy ! Component: 2450 - total flux cleaned = 0.000876743 Jy ! Component: 2500 - total flux cleaned = 0.000889601 Jy ! Component: 2550 - total flux cleaned = 0.000889701 Jy ! Component: 2600 - total flux cleaned = 0.000978012 Jy ! Component: 2650 - total flux cleaned = 0.00104073 Jy ! Component: 2700 - total flux cleaned = 0.00105319 Jy ! Component: 2750 - total flux cleaned = 0.00105323 Jy ! Component: 2800 - total flux cleaned = 0.00110232 Jy ! Component: 2850 - total flux cleaned = 0.00113885 Jy ! Component: 2900 - total flux cleaned = 0.00119954 Jy ! Component: 2950 - total flux cleaned = 0.00118759 Jy ! Component: 3000 - total flux cleaned = 0.00125941 Jy ! Component: 3050 - total flux cleaned = 0.00128317 Jy ! Component: 3100 - total flux cleaned = 0.00130686 Jy ! Component: 3150 - total flux cleaned = 0.0013537 Jy ! Component: 3200 - total flux cleaned = 0.00141205 Jy ! Component: 3250 - total flux cleaned = 0.00145845 Jy ! Component: 3300 - total flux cleaned = 0.00144697 Jy ! Component: 3350 - total flux cleaned = 0.00152717 Jy ! Component: 3400 - total flux cleaned = 0.0015158 Jy ! Component: 3450 - total flux cleaned = 0.00159511 Jy ! Component: 3500 - total flux cleaned = 0.00160631 Jy ! Component: 3550 - total flux cleaned = 0.00166224 Jy ! Component: 3600 - total flux cleaned = 0.00168457 Jy ! Component: 3650 - total flux cleaned = 0.00169573 Jy ! Component: 3700 - total flux cleaned = 0.00170684 Jy ! Component: 3750 - total flux cleaned = 0.00170691 Jy ! Component: 3800 - total flux cleaned = 0.00170692 Jy ! Component: 3850 - total flux cleaned = 0.0017826 Jy ! Component: 3900 - total flux cleaned = 0.00175031 Jy ! Component: 3950 - total flux cleaned = 0.00177168 Jy ! Component: 4000 - total flux cleaned = 0.00181419 Jy ! Component: 4050 - total flux cleaned = 0.00182477 Jy ! Total flux subtracted in 4096 components = 0.00182476 Jy ! Clean residual min=-0.000604 max=0.000604 Jy/beam ! Clean residual mean=-0.000000 rms=0.000198 Jy/beam ! Combined flux in latest and established models = 0.138798 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 445 components and 0.138797 Jy ![Exited script file: muppet] wmap "J0915-0429_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.256 x 7.779 at -1.98 degrees (North through East) ! Clean map min=-0.0013081 max=0.078151 Jy/beam ! Writing clean map to FITS file: J0915-0429_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0781512 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000198599 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.762365 0.762365 1.52473 3.04946 6.09892 12.1978 24.3957 48.7913 97.5827 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.078 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.256 x 7.779 at -1.98 degrees (North through East) ! Clean map min=-0.0013081 max=0.078151 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0915-0429_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:38:09 2019