! Started logfile: J0915+0745_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:44:25 2019 obs J0915+0745_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0915+0745_S_2017_05_31_pus_uva.fits ! AN table 1: 305 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.698798 visibilities/baseline/integration-bin. ! Found source: J0915+0745 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 38364 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0915+0745_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 907 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1007 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 951 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1940 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.985631Jy sigma=0.008136 ! Fit after self-cal, rms=0.951645Jy sigma=0.007937 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.846 mas, bmaj=6.835 mas, bpa=-1.629 degrees ! Estimated noise=902.535 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.040533 Jy ! Component: 100 - total flux cleaned = 0.0500308 Jy ! Total flux subtracted in 100 components = 0.0500308 Jy ! Clean residual min=-0.003318 max=0.003457 Jy/beam ! Clean residual mean=-0.000008 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.0500309 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0500309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103445Jy sigma=0.000671 ! Fit after self-cal, rms=0.102944Jy sigma=0.000667 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.42 mas, bmaj=7.98 mas, bpa=-1.683 degrees ! Estimated noise=511.286 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158165 Jy ! Component: 100 - total flux cleaned = 0.00145417 Jy ! Component: 150 - total flux cleaned = 0.00127103 Jy ! Component: 200 - total flux cleaned = 0.0012065 Jy ! Total flux subtracted in 200 components = 0.0012065 Jy ! Clean residual min=-0.002744 max=0.002363 Jy/beam ! Clean residual mean=-0.000008 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.0512374 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 18 components and 0.0512374 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102808Jy sigma=0.000667 ! Fit after self-cal, rms=0.102779Jy sigma=0.000666 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.98 HN 1.03 KP 1.01 ! LA 0.98 MK 0.96 NL 1.01 OV 1.05 ! PT 1.04 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.19 HN 1.00 KP 0.99 ! LA 0.96 MK 0.95 NL 1.02 OV 1.11 ! PT 1.06 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 1.23 HN 1.16 KP 1.02 ! LA 0.99 MK 1.02 NL 1.00 OV 0.98 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.84 KP 0.63 ! LA 0.79 MK 0.88 NL 1.00* OV 1.00* ! PT 0.86 SC 1.00* ! ! ! Fit before self-cal, rms=0.102779Jy sigma=0.000666 ! Fit after self-cal, rms=0.097259Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.395 mas, bmaj=7.915 mas, bpa=-2.152 degrees ! Estimated noise=516.982 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000754087 Jy ! Component: 100 - total flux cleaned = 0.000918965 Jy ! Component: 150 - total flux cleaned = 0.000965692 Jy ! Component: 200 - total flux cleaned = 0.000987392 Jy ! Total flux subtracted in 200 components = 0.000987392 Jy ! Clean residual min=-0.001967 max=0.002099 Jy/beam ! Clean residual mean=-0.000006 rms=0.000464 Jy/beam ! Combined flux in latest and established models = 0.0522247 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 32 components and 0.0522247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097230Jy sigma=0.000664 ! Fit after self-cal, rms=0.097123Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097123Jy sigma=0.000663 ! Fit after self-cal, rms=0.096303Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.392 mas, bmaj=7.849 mas, bpa=-2.652 degrees ! Estimated noise=524.334 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000943473 Jy ! Component: 100 - total flux cleaned = 0.00103453 Jy ! Component: 150 - total flux cleaned = 0.00102274 Jy ! Component: 200 - total flux cleaned = 0.00101128 Jy ! Total flux subtracted in 200 components = 0.00101128 Jy ! Clean residual min=-0.001610 max=0.001832 Jy/beam ! Clean residual mean=0.000001 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.053236 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.053236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096279Jy sigma=0.000662 ! Fit after self-cal, rms=0.096288Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164712 Jy ! Component: 100 - total flux cleaned = 0.00215356 Jy ! Component: 150 - total flux cleaned = 0.00252935 Jy ! Component: 200 - total flux cleaned = 0.0028234 Jy ! Total flux subtracted in 200 components = 0.0028234 Jy ! Clean residual min=-0.001454 max=0.001448 Jy/beam ! Clean residual mean=0.000002 rms=0.000361 Jy/beam ! Combined flux in latest and established models = 0.0560594 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 63 components and 0.0560594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096246Jy sigma=0.000661 ! Fit after self-cal, rms=0.096238Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096238Jy sigma=0.000661 ! Fit after self-cal, rms=0.096158Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.39 mas, bmaj=7.831 mas, bpa=-2.712 degrees ! Estimated noise=527.866 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000859041 Jy ! Component: 100 - total flux cleaned = 0.00128077 Jy ! Component: 150 - total flux cleaned = 0.00161803 Jy ! Component: 200 - total flux cleaned = 0.00176172 Jy ! Total flux subtracted in 200 components = 0.00176172 Jy ! Clean residual min=-0.001316 max=0.001247 Jy/beam ! Clean residual mean=0.000000 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.0578211 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 75 components and 0.0578212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096130Jy sigma=0.000660 ! Fit after self-cal, rms=0.096137Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000542021 Jy ! Component: 100 - total flux cleaned = 0.000746338 Jy ! Component: 150 - total flux cleaned = 0.000845478 Jy ! Component: 200 - total flux cleaned = 0.000900842 Jy ! Total flux subtracted in 200 components = 0.000900842 Jy ! Clean residual min=-0.001266 max=0.001285 Jy/beam ! Clean residual mean=0.000001 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.058722 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 83 components and 0.058722 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096123Jy sigma=0.000660 ! Fit after self-cal, rms=0.096120Jy sigma=0.000660 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096120Jy sigma=0.000660 ! Fit after self-cal, rms=0.097273Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.346 mas, bmaj=11.92 mas, bpa=-7.424 degrees ! Estimated noise=660.736 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00092463 Jy ! Component: 100 - total flux cleaned = 0.00149771 Jy ! Component: 150 - total flux cleaned = 0.00163574 Jy ! Component: 200 - total flux cleaned = 0.00170873 Jy ! Total flux subtracted in 200 components = 0.00170873 Jy ! Clean residual min=-0.001593 max=0.001556 Jy/beam ! Clean residual mean=0.000002 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.0604307 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 94 components and 0.0604307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097272Jy sigma=0.000660 ! Fit after self-cal, rms=0.097289Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000405453 Jy ! Component: 100 - total flux cleaned = 0.000530926 Jy ! Component: 150 - total flux cleaned = 0.000583382 Jy ! Component: 200 - total flux cleaned = 0.000640475 Jy ! Total flux subtracted in 200 components = 0.000640475 Jy ! Clean residual min=-0.001592 max=0.001532 Jy/beam ! Clean residual mean=0.000002 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.0610712 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 100 components and 0.0610712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097288Jy sigma=0.000660 ! Fit after self-cal, rms=0.097287Jy sigma=0.000660 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=7.835 mas, bpa=-2.786 degrees ! Estimated noise=530.974 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.389 x 7.835 at -2.786 degrees (North through East) ! Clean map min=-0.0018692 max=0.054145 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.85 mas, bmaj=6.754 mas, bpa=-2.761 degrees ! Estimated noise=902.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0417777 Jy ! Component: 100 - total flux cleaned = 0.0512185 Jy ! Component: 150 - total flux cleaned = 0.055108 Jy ! Component: 200 - total flux cleaned = 0.0570092 Jy ! Total flux subtracted in 200 components = 0.0570092 Jy ! Clean residual min=-0.002480 max=0.002527 Jy/beam ! Clean residual mean=-0.000001 rms=0.000597 Jy/beam ! Combined flux in latest and established models = 0.0570092 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0570092 Jy ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=7.835 mas, bpa=-2.786 degrees ! Estimated noise=530.974 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195553 Jy ! Component: 100 - total flux cleaned = 0.00265651 Jy ! Component: 150 - total flux cleaned = 0.00293287 Jy ! Component: 200 - total flux cleaned = 0.00313509 Jy ! Total flux subtracted in 200 components = 0.00313509 Jy ! Clean residual min=-0.001390 max=0.001302 Jy/beam ! Clean residual mean=0.000001 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.0601443 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 28 components and 0.0601443 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.346 mas, bmaj=11.92 mas, bpa=-7.424 degrees ! Estimated noise=660.736 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000613487 Jy ! Component: 100 - total flux cleaned = 0.000910393 Jy ! Component: 150 - total flux cleaned = 0.00114479 Jy ! Component: 200 - total flux cleaned = 0.00128186 Jy ! Total flux subtracted in 200 components = 0.00128186 Jy ! Clean residual min=-0.001633 max=0.001518 Jy/beam ! Clean residual mean=0.000003 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.0614261 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.42495e-05 Jy ! Component: 100 - total flux cleaned = 8.38152e-05 Jy ! Component: 150 - total flux cleaned = 9.78757e-05 Jy ! Component: 200 - total flux cleaned = 9.79142e-05 Jy ! Total flux subtracted in 200 components = 9.79142e-05 Jy ! Clean residual min=-0.001607 max=0.001490 Jy/beam ! Clean residual mean=0.000003 rms=0.000379 Jy/beam ! Combined flux in latest and established models = 0.0615241 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 50 components and 0.061524 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=7.835 mas, bpa=-2.786 degrees ! Estimated noise=530.974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000285738 Jy ! Component: 100 - total flux cleaned = -0.000371485 Jy ! Component: 150 - total flux cleaned = -0.000371786 Jy ! Component: 200 - total flux cleaned = -0.000394164 Jy ! Total flux subtracted in 200 components = -0.000394164 Jy ! Clean residual min=-0.001261 max=0.001272 Jy/beam ! Clean residual mean=0.000001 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.0611299 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 62 components and 0.0611299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097291Jy sigma=0.000660 ! Fit after self-cal, rms=0.097294Jy sigma=0.000660 wmodel J0915+0745_S_2017_05_31_pus_map.mod ! Writing 62 model components to file: J0915+0745_S_2017_05_31_pus_map.mod wobs J0915+0745_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0915+0745_S_2017_05_31_pus_uvs.fits wwins J0915+0745_S_2017_05_31_pus_map.win ! wwins: Wrote 2 windows to J0915+0745_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.02815e-05 Jy ! Component: 100 - total flux cleaned = -0.000137879 Jy ! Component: 150 - total flux cleaned = -0.000330674 Jy ! Component: 200 - total flux cleaned = -0.000518109 Jy ! Component: 250 - total flux cleaned = -0.000701067 Jy ! Component: 300 - total flux cleaned = -0.000899115 Jy ! Component: 350 - total flux cleaned = -0.00109277 Jy ! Component: 400 - total flux cleaned = -0.00126325 Jy ! Component: 450 - total flux cleaned = -0.0013931 Jy ! Component: 500 - total flux cleaned = -0.00155656 Jy ! Component: 550 - total flux cleaned = -0.00164537 Jy ! Component: 600 - total flux cleaned = -0.00171568 Jy ! Component: 650 - total flux cleaned = -0.00185345 Jy ! Component: 700 - total flux cleaned = -0.00193808 Jy ! Component: 750 - total flux cleaned = -0.00203838 Jy ! Component: 800 - total flux cleaned = -0.00215364 Jy ! Component: 850 - total flux cleaned = -0.00225106 Jy ! Component: 900 - total flux cleaned = -0.00228316 Jy ! Component: 950 - total flux cleaned = -0.00244144 Jy ! Component: 1000 - total flux cleaned = -0.00245711 Jy ! Component: 1050 - total flux cleaned = -0.00253454 Jy ! Component: 1100 - total flux cleaned = -0.0027029 Jy ! Component: 1150 - total flux cleaned = -0.00270285 Jy ! Component: 1200 - total flux cleaned = -0.00277793 Jy ! Component: 1250 - total flux cleaned = -0.00285204 Jy ! Component: 1300 - total flux cleaned = -0.00289582 Jy ! Component: 1350 - total flux cleaned = -0.00298277 Jy ! Component: 1400 - total flux cleaned = -0.00305454 Jy ! Component: 1450 - total flux cleaned = -0.00311139 Jy ! Component: 1500 - total flux cleaned = -0.0031254 Jy ! Component: 1550 - total flux cleaned = -0.00320936 Jy ! Component: 1600 - total flux cleaned = -0.0032509 Jy ! Component: 1650 - total flux cleaned = -0.00327855 Jy ! Component: 1700 - total flux cleaned = -0.00337349 Jy ! Component: 1750 - total flux cleaned = -0.00342743 Jy ! Component: 1800 - total flux cleaned = -0.00346736 Jy ! Component: 1850 - total flux cleaned = -0.00350703 Jy ! Component: 1900 - total flux cleaned = -0.00352025 Jy ! Component: 1950 - total flux cleaned = -0.00359839 Jy ! Component: 2000 - total flux cleaned = -0.00361119 Jy ! Component: 2050 - total flux cleaned = -0.00363679 Jy ! Component: 2100 - total flux cleaned = -0.00366221 Jy ! Component: 2150 - total flux cleaned = -0.00366213 Jy ! Component: 2200 - total flux cleaned = -0.00369994 Jy ! Component: 2250 - total flux cleaned = -0.00377455 Jy ! Component: 2300 - total flux cleaned = -0.00379924 Jy ! Component: 2350 - total flux cleaned = -0.00379935 Jy ! Component: 2400 - total flux cleaned = -0.00389664 Jy ! Component: 2450 - total flux cleaned = -0.00384842 Jy ! Component: 2500 - total flux cleaned = -0.00387249 Jy ! Component: 2550 - total flux cleaned = -0.00393197 Jy ! Component: 2600 - total flux cleaned = -0.00395554 Jy ! Component: 2650 - total flux cleaned = -0.00401418 Jy ! Component: 2700 - total flux cleaned = -0.00396751 Jy ! Component: 2750 - total flux cleaned = -0.00394434 Jy ! Component: 2800 - total flux cleaned = -0.00394439 Jy ! Component: 2850 - total flux cleaned = -0.00395584 Jy ! Component: 2900 - total flux cleaned = -0.00398996 Jy ! Component: 2950 - total flux cleaned = -0.00394491 Jy ! Component: 3000 - total flux cleaned = -0.00395609 Jy ! Component: 3050 - total flux cleaned = -0.00400048 Jy ! Component: 3100 - total flux cleaned = -0.00394533 Jy ! Component: 3150 - total flux cleaned = -0.0039673 Jy ! Component: 3200 - total flux cleaned = -0.00400008 Jy ! Component: 3250 - total flux cleaned = -0.00394588 Jy ! Component: 3300 - total flux cleaned = -0.00396745 Jy ! Component: 3350 - total flux cleaned = -0.00397812 Jy ! Component: 3400 - total flux cleaned = -0.00399939 Jy ! Component: 3450 - total flux cleaned = -0.00399949 Jy ! Component: 3500 - total flux cleaned = -0.00398891 Jy ! Component: 3550 - total flux cleaned = -0.00400988 Jy ! Component: 3600 - total flux cleaned = -0.00403068 Jy ! Component: 3650 - total flux cleaned = -0.00396883 Jy ! Component: 3700 - total flux cleaned = -0.00402008 Jy ! Component: 3750 - total flux cleaned = -0.00399972 Jy ! Component: 3800 - total flux cleaned = -0.00396938 Jy ! Component: 3850 - total flux cleaned = -0.0039995 Jy ! Component: 3900 - total flux cleaned = -0.00395941 Jy ! Component: 3950 - total flux cleaned = -0.00393953 Jy ! Component: 4000 - total flux cleaned = -0.00389988 Jy ! Component: 4050 - total flux cleaned = -0.00389986 Jy ! Total flux subtracted in 4096 components = -0.00392923 Jy ! Clean residual min=-0.000582 max=0.000500 Jy/beam ! Clean residual mean=0.000001 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.0572007 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 361 components and 0.0572007 Jy ![Exited script file: muppet] wmap "J0915+0745_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.389 x 7.835 at -2.786 degrees (North through East) ! Clean map min=-0.0018243 max=0.054156 Jy/beam ! Writing clean map to FITS file: J0915+0745_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0541559 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000180906 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00214 1.00214 2.00429 4.00857 8.01714 16.0343 32.0686 64.1371 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.054 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.389 x 7.835 at -2.786 degrees (North through East) ! Clean map min=-0.0018243 max=0.054156 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0915+0745_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:44:32 2019