! Started logfile: J0914-3314_S_2017_09_26_pus_uvs.log on Sat May 11 12:59:21 2019 obs J0914-3314_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0914-3314_S_2017_09_26_pus_uva.fits ! AN table 1: 294 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.663549 visibilities/baseline/integration-bin. ! Found source: J0914-3314 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 28092 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0914-3314_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 916 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 597 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 742 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 2026 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.900794Jy sigma=0.005362 ! Fit after self-cal, rms=0.846515Jy sigma=0.005041 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=13.38 mas, bpa=-22.57 degrees ! Estimated noise=2665.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114717 Jy ! Component: 100 - total flux cleaned = 0.165412 Jy ! Total flux subtracted in 100 components = 0.165412 Jy ! Clean residual min=-0.017977 max=0.033717 Jy/beam ! Clean residual mean=-0.000582 rms=0.006666 Jy/beam ! Combined flux in latest and established models = 0.165412 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.165412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154348Jy sigma=0.000915 ! Fit after self-cal, rms=0.154045Jy sigma=0.000912 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.365 mas, bmaj=15.77 mas, bpa=-22.19 degrees ! Estimated noise=929.687 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0518873 Jy ! Component: 100 - total flux cleaned = 0.0804637 Jy ! Component: 150 - total flux cleaned = 0.0976148 Jy ! Component: 200 - total flux cleaned = 0.108256 Jy ! Total flux subtracted in 200 components = 0.108256 Jy ! Clean residual min=-0.018462 max=0.046349 Jy/beam ! Clean residual mean=-0.000725 rms=0.008770 Jy/beam ! Combined flux in latest and established models = 0.273667 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 118 components and 0.273667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137632Jy sigma=0.000788 ! Fit after self-cal, rms=0.137499Jy sigma=0.000786 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.35 KP 1.19 ! LA 0.88 MK 1.06 NL 1.00* OV 1.22 ! PT 0.84 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.00* HN 1.10 KP 1.10 ! LA 0.86 MK 1.01 NL 1.05 OV 1.26 ! PT 0.83 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.09 KP 1.14 ! LA 0.84 MK 0.96 NL 0.97 OV 1.13 ! PT 0.81 ! ! ! Correcting IF 4. ! A total of 396 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.93 KP 1.00* ! LA 0.86 MK 0.69 NL 1.00* OV 1.34 ! PT 0.92 ! ! ! Fit before self-cal, rms=0.137499Jy sigma=0.000786 ! Fit after self-cal, rms=0.145110Jy sigma=0.000748 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.377 mas, bmaj=15.96 mas, bpa=-22.42 degrees ! Estimated noise=929.953 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (20, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0351265 Jy ! Component: 100 - total flux cleaned = 0.0509875 Jy ! Component: 150 - total flux cleaned = 0.0606323 Jy ! Component: 200 - total flux cleaned = 0.0669532 Jy ! Total flux subtracted in 200 components = 0.0669532 Jy ! Clean residual min=-0.010913 max=0.015077 Jy/beam ! Clean residual mean=0.000246 rms=0.004175 Jy/beam ! Combined flux in latest and established models = 0.340621 Jy ! Performing phase self-cal ! Adding 79 model components to the UV plane model. ! The established model now contains 196 components and 0.34062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136515Jy sigma=0.000690 ! Fit after self-cal, rms=0.135671Jy sigma=0.000681 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135671Jy sigma=0.000681 ! Fit after self-cal, rms=0.128854Jy sigma=0.000662 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.44 mas, bmaj=16.07 mas, bpa=-22.27 degrees ! Estimated noise=922.683 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139467 Jy ! Component: 100 - total flux cleaned = 0.0189654 Jy ! Component: 150 - total flux cleaned = 0.0199364 Jy ! Component: 200 - total flux cleaned = 0.020533 Jy ! Total flux subtracted in 200 components = 0.020533 Jy ! Clean residual min=-0.006248 max=0.007628 Jy/beam ! Clean residual mean=0.000156 rms=0.001919 Jy/beam ! Combined flux in latest and established models = 0.361154 Jy selfcal ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 254 components and 0.361153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127549Jy sigma=0.000651 ! Fit after self-cal, rms=0.127231Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429855 Jy ! Component: 100 - total flux cleaned = 0.00503435 Jy ! Component: 150 - total flux cleaned = 0.00486806 Jy ! Component: 200 - total flux cleaned = 0.00466391 Jy ! Total flux subtracted in 200 components = 0.00466391 Jy ! Clean residual min=-0.004703 max=0.006702 Jy/beam ! Clean residual mean=0.000189 rms=0.001653 Jy/beam ! Combined flux in latest and established models = 0.365817 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 288 components and 0.365817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127053Jy sigma=0.000647 ! Fit after self-cal, rms=0.127019Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127019Jy sigma=0.000647 ! Fit after self-cal, rms=0.129845Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=16.15 mas, bpa=-22.29 degrees ! Estimated noise=925.412 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00464173 Jy ! Component: 100 - total flux cleaned = 0.00466093 Jy ! Component: 150 - total flux cleaned = 0.00472478 Jy ! Component: 200 - total flux cleaned = 0.00482973 Jy ! Total flux subtracted in 200 components = 0.00482973 Jy ! Clean residual min=-0.002813 max=0.004921 Jy/beam ! Clean residual mean=0.000052 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.370647 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 316 components and 0.370647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129669Jy sigma=0.000642 ! Fit after self-cal, rms=0.129691Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-85.5, -75). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00435686 Jy ! Component: 100 - total flux cleaned = 0.00664063 Jy ! Component: 150 - total flux cleaned = 0.00721003 Jy ! Component: 200 - total flux cleaned = 0.00746197 Jy ! Total flux subtracted in 200 components = 0.00746197 Jy ! Clean residual min=-0.002460 max=0.003884 Jy/beam ! Clean residual mean=0.000011 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.378109 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 347 components and 0.378109 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129539Jy sigma=0.000641 ! Fit after self-cal, rms=0.129519Jy sigma=0.000640 ! Inverting map ! Added new window around map position (90, 84.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301651 Jy ! Component: 100 - total flux cleaned = 0.00482365 Jy ! Component: 150 - total flux cleaned = 0.00598577 Jy ! Component: 200 - total flux cleaned = 0.00659848 Jy ! Total flux subtracted in 200 components = 0.00659848 Jy ! Clean residual min=-0.002301 max=0.002111 Jy/beam ! Clean residual mean=-0.000008 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.384707 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 381 components and 0.384707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129424Jy sigma=0.000640 ! Fit after self-cal, rms=0.129390Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129390Jy sigma=0.000640 ! Fit after self-cal, rms=0.130836Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.053 mas, bmaj=30.26 mas, bpa=-9.853 degrees ! Estimated noise=1071.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124543 Jy ! Component: 100 - total flux cleaned = 0.00186095 Jy ! Component: 150 - total flux cleaned = 0.00214351 Jy ! Component: 200 - total flux cleaned = 0.00226951 Jy ! Total flux subtracted in 200 components = 0.00226951 Jy ! Clean residual min=-0.001643 max=0.001853 Jy/beam ! Clean residual mean=-0.000006 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.386977 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 410 components and 0.386977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130811Jy sigma=0.000639 ! Fit after self-cal, rms=0.130807Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196431 Jy ! Component: 100 - total flux cleaned = 0.000270592 Jy ! Component: 150 - total flux cleaned = 0.000336848 Jy ! Component: 200 - total flux cleaned = 0.000428692 Jy ! Total flux subtracted in 200 components = 0.000428692 Jy ! Clean residual min=-0.001487 max=0.001697 Jy/beam ! Clean residual mean=-0.000016 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.387406 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 440 components and 0.387406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130799Jy sigma=0.000639 ! Fit after self-cal, rms=0.130799Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=16.18 mas, bpa=-22.31 degrees ! Estimated noise=930.245 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.495 x 16.18 at -22.31 degrees (North through East) ! Clean map min=-0.0018536 max=0.15198 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.792 mas, bmaj=13.51 mas, bpa=-22.47 degrees ! Estimated noise=2800.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11712 Jy ! Component: 100 - total flux cleaned = 0.173939 Jy ! Component: 150 - total flux cleaned = 0.211492 Jy ! Component: 200 - total flux cleaned = 0.239467 Jy ! Total flux subtracted in 200 components = 0.239467 Jy ! Clean residual min=-0.011740 max=0.017112 Jy/beam ! Clean residual mean=-0.000328 rms=0.004158 Jy/beam ! Combined flux in latest and established models = 0.239467 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 65 model components to the UV plane model. ! The established model now contains 65 components and 0.239467 Jy ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=16.18 mas, bpa=-22.31 degrees ! Estimated noise=930.245 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0332239 Jy ! Component: 100 - total flux cleaned = 0.056738 Jy ! Component: 150 - total flux cleaned = 0.0740725 Jy ! Component: 200 - total flux cleaned = 0.0870482 Jy ! Total flux subtracted in 200 components = 0.0870482 Jy ! Clean residual min=-0.005700 max=0.008556 Jy/beam ! Clean residual mean=-0.000178 rms=0.002692 Jy/beam ! Combined flux in latest and established models = 0.326516 Jy ! Adding 131 model components to the UV plane model. ! The established model now contains 190 components and 0.326515 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.053 mas, bmaj=30.26 mas, bpa=-9.853 degrees ! Estimated noise=1071.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148471 Jy ! Component: 100 - total flux cleaned = 0.0247235 Jy ! Component: 150 - total flux cleaned = 0.0320645 Jy ! Component: 200 - total flux cleaned = 0.0377184 Jy ! Total flux subtracted in 200 components = 0.0377184 Jy ! Clean residual min=-0.003782 max=0.005189 Jy/beam ! Clean residual mean=-0.000063 rms=0.001584 Jy/beam ! Combined flux in latest and established models = 0.364234 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00446305 Jy ! Component: 100 - total flux cleaned = 0.00802221 Jy ! Component: 150 - total flux cleaned = 0.0108824 Jy ! Component: 200 - total flux cleaned = 0.0132159 Jy ! Total flux subtracted in 200 components = 0.0132159 Jy ! Clean residual min=-0.002225 max=0.003104 Jy/beam ! Clean residual mean=-0.000046 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.37745 Jy ! Adding 159 model components to the UV plane model. ! The established model now contains 344 components and 0.37745 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.495 mas, bmaj=16.18 mas, bpa=-22.31 degrees ! Estimated noise=930.245 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203202 Jy ! Component: 100 - total flux cleaned = 0.00292526 Jy ! Component: 150 - total flux cleaned = 0.00354304 Jy ! Component: 200 - total flux cleaned = 0.00402849 Jy ! Total flux subtracted in 200 components = 0.00402849 Jy ! Clean residual min=-0.002129 max=0.002531 Jy/beam ! Clean residual mean=-0.000031 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.381478 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 376 components and 0.381478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130893Jy sigma=0.000640 ! Fit after self-cal, rms=0.130796Jy sigma=0.000640 wmodel J0914-3314_S_2017_09_26_pus_map.mod ! Writing 376 model components to file: J0914-3314_S_2017_09_26_pus_map.mod wobs J0914-3314_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0914-3314_S_2017_09_26_pus_uvs.fits wwins J0914-3314_S_2017_09_26_pus_map.win ! wwins: Wrote 4 windows to J0914-3314_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000732798 Jy ! Component: 100 - total flux cleaned = 0.00107802 Jy ! Component: 150 - total flux cleaned = 0.00104735 Jy ! Component: 200 - total flux cleaned = 0.00098916 Jy ! Component: 250 - total flux cleaned = 0.00104193 Jy ! Component: 300 - total flux cleaned = 0.000964449 Jy ! Component: 350 - total flux cleaned = 0.00103697 Jy ! Component: 400 - total flux cleaned = 0.0011997 Jy ! Component: 450 - total flux cleaned = 0.00147117 Jy ! Component: 500 - total flux cleaned = 0.0016681 Jy ! Component: 550 - total flux cleaned = 0.00190277 Jy ! Component: 600 - total flux cleaned = 0.00208991 Jy ! Component: 650 - total flux cleaned = 0.00227307 Jy ! Component: 700 - total flux cleaned = 0.00243287 Jy ! Component: 750 - total flux cleaned = 0.00262829 Jy ! Component: 800 - total flux cleaned = 0.00280015 Jy ! Component: 850 - total flux cleaned = 0.0029496 Jy ! Component: 900 - total flux cleaned = 0.00309619 Jy ! Component: 950 - total flux cleaned = 0.00322191 Jy ! Component: 1000 - total flux cleaned = 0.00331034 Jy ! Component: 1050 - total flux cleaned = 0.00334535 Jy ! Component: 1100 - total flux cleaned = 0.00344772 Jy ! Component: 1150 - total flux cleaned = 0.00349794 Jy ! Component: 1200 - total flux cleaned = 0.00354782 Jy ! Component: 1250 - total flux cleaned = 0.00362989 Jy ! Component: 1300 - total flux cleaned = 0.00371078 Jy ! Component: 1350 - total flux cleaned = 0.00375846 Jy ! Component: 1400 - total flux cleaned = 0.00375836 Jy ! Component: 1450 - total flux cleaned = 0.00382069 Jy ! Component: 1500 - total flux cleaned = 0.00380519 Jy ! Component: 1550 - total flux cleaned = 0.00389644 Jy ! Component: 1600 - total flux cleaned = 0.00397144 Jy ! Component: 1650 - total flux cleaned = 0.004016 Jy ! Component: 1700 - total flux cleaned = 0.0040601 Jy ! Component: 1750 - total flux cleaned = 0.00413278 Jy ! Component: 1800 - total flux cleaned = 0.00416145 Jy ! Component: 1850 - total flux cleaned = 0.00416147 Jy ! Component: 1900 - total flux cleaned = 0.00420377 Jy ! Component: 1950 - total flux cleaned = 0.00423159 Jy ! Component: 2000 - total flux cleaned = 0.00428699 Jy ! Component: 2050 - total flux cleaned = 0.00438286 Jy ! Component: 2100 - total flux cleaned = 0.00435582 Jy ! Component: 2150 - total flux cleaned = 0.00436916 Jy ! Component: 2200 - total flux cleaned = 0.00432931 Jy ! Component: 2250 - total flux cleaned = 0.00431616 Jy ! Component: 2300 - total flux cleaned = 0.00439498 Jy ! Component: 2350 - total flux cleaned = 0.00440784 Jy ! Component: 2400 - total flux cleaned = 0.00445922 Jy ! Component: 2450 - total flux cleaned = 0.00442088 Jy ! Component: 2500 - total flux cleaned = 0.00440822 Jy ! Component: 2550 - total flux cleaned = 0.00443347 Jy ! Component: 2600 - total flux cleaned = 0.0044836 Jy ! Component: 2650 - total flux cleaned = 0.00443372 Jy ! Component: 2700 - total flux cleaned = 0.00448318 Jy ! Component: 2750 - total flux cleaned = 0.00445852 Jy ! Component: 2800 - total flux cleaned = 0.00449522 Jy ! Component: 2850 - total flux cleaned = 0.00449534 Jy ! Component: 2900 - total flux cleaned = 0.00450746 Jy ! Component: 2950 - total flux cleaned = 0.00455563 Jy ! Component: 3000 - total flux cleaned = 0.00454375 Jy ! Component: 3050 - total flux cleaned = 0.00456757 Jy ! Component: 3100 - total flux cleaned = 0.00456752 Jy ! Component: 3150 - total flux cleaned = 0.00459113 Jy ! Component: 3200 - total flux cleaned = 0.00459114 Jy ! Component: 3250 - total flux cleaned = 0.00459106 Jy ! Component: 3300 - total flux cleaned = 0.00463787 Jy ! Component: 3350 - total flux cleaned = 0.00470786 Jy ! Component: 3400 - total flux cleaned = 0.00470785 Jy ! Component: 3450 - total flux cleaned = 0.00473104 Jy ! Component: 3500 - total flux cleaned = 0.00476579 Jy ! Component: 3550 - total flux cleaned = 0.00481211 Jy ! Component: 3600 - total flux cleaned = 0.00482371 Jy ! Component: 3650 - total flux cleaned = 0.00484681 Jy ! Component: 3700 - total flux cleaned = 0.00486994 Jy ! Component: 3750 - total flux cleaned = 0.00489306 Jy ! Component: 3800 - total flux cleaned = 0.00491617 Jy ! Component: 3850 - total flux cleaned = 0.00493927 Jy ! Component: 3900 - total flux cleaned = 0.00496242 Jy ! Component: 3950 - total flux cleaned = 0.00495089 Jy ! Component: 4000 - total flux cleaned = 0.00496246 Jy ! Component: 4050 - total flux cleaned = 0.00496247 Jy ! Total flux subtracted in 4096 components = 0.00497405 Jy ! Clean residual min=-0.000695 max=0.000679 Jy/beam ! Clean residual mean=0.000002 rms=0.000209 Jy/beam ! Combined flux in latest and established models = 0.386452 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 627 components and 0.386452 Jy ![Exited script file: muppet] wmap "J0914-3314_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.495 x 16.18 at -22.31 degrees (North through East) ! Clean map min=-0.001546 max=0.15969 Jy/beam ! Writing clean map to FITS file: J0914-3314_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.159688 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000208432 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.391573 0.391573 0.783147 1.56629 3.13259 6.26517 12.5303 25.0607 50.1214 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.159 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.495 x 16.18 at -22.31 degrees (North through East) ! Clean map min=-0.001546 max=0.15969 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0914-3314_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:59:27 2019