! Started logfile: J0914-2038_S_2017_06_10_pus_uvs.log on Mon May 6 14:49:36 2019 obs J0914-2038_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0914-2038_S_2017_06_10_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.882749 visibilities/baseline/integration-bin. ! Found source: J0914-2038 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 12076 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0914-2038_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 148 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 438 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.963884Jy sigma=0.007375 ! Fit after self-cal, rms=0.939384Jy sigma=0.007198 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.408 mas, bmaj=7.059 mas, bpa=-7.465 degrees ! Estimated noise=1561.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0465077 Jy ! Component: 100 - total flux cleaned = 0.0585623 Jy ! Total flux subtracted in 100 components = 0.0585623 Jy ! Clean residual min=-0.004509 max=0.005884 Jy/beam ! Clean residual mean=0.000005 rms=0.001306 Jy/beam ! Combined flux in latest and established models = 0.0585623 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0585623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091905Jy sigma=0.000674 ! Fit after self-cal, rms=0.091667Jy sigma=0.000672 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=8.523 mas, bpa=-6.121 degrees ! Estimated noise=1007.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00848698 Jy ! Component: 100 - total flux cleaned = 0.0124066 Jy ! Component: 150 - total flux cleaned = 0.0144607 Jy ! Component: 200 - total flux cleaned = 0.0155675 Jy ! Total flux subtracted in 200 components = 0.0155675 Jy ! Clean residual min=-0.002707 max=0.003453 Jy/beam ! Clean residual mean=-0.000001 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.0741298 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 32 components and 0.0741298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090943Jy sigma=0.000666 ! Fit after self-cal, rms=0.090929Jy sigma=0.000666 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.93 HN 1.00 KP 1.00 ! LA 1.02 MK 0.99 NL 0.95 OV 1.13 ! PT 1.06 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.05 KP 0.95 ! LA 0.94 MK 1.08 NL 0.99 OV 1.11 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.92 HN 1.05 KP 0.97 ! LA 0.98 MK 1.00 NL 1.01 OV 1.01 ! PT 1.03 SC 1.06 ! ! ! Correcting IF 4. ! A total of 72 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 0.91 KP 1.00* ! LA 0.80 MK 0.94 NL 1.00* OV 1.00* ! PT 0.93 SC 1.00* ! ! ! Fit before self-cal, rms=0.090929Jy sigma=0.000666 ! Fit after self-cal, rms=0.090846Jy sigma=0.000666 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.228 mas, bmaj=8.519 mas, bpa=-6.285 degrees ! Estimated noise=1011.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000255407 Jy ! Component: 100 - total flux cleaned = 0.000346427 Jy ! Component: 150 - total flux cleaned = 0.000345581 Jy ! Component: 200 - total flux cleaned = 0.000371162 Jy ! Total flux subtracted in 200 components = 0.000371162 Jy ! Clean residual min=-0.002595 max=0.003072 Jy/beam ! Clean residual mean=0.000006 rms=0.000699 Jy/beam ! Combined flux in latest and established models = 0.074501 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 35 components and 0.074501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090828Jy sigma=0.000665 ! Fit after self-cal, rms=0.090837Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090837Jy sigma=0.000665 ! Fit after self-cal, rms=0.091504Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.232 mas, bmaj=8.501 mas, bpa=-6.531 degrees ! Estimated noise=1014.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000399064 Jy ! Component: 100 - total flux cleaned = 0.000395762 Jy ! Component: 150 - total flux cleaned = 0.000395357 Jy ! Component: 200 - total flux cleaned = 0.000432879 Jy ! Total flux subtracted in 200 components = 0.000432879 Jy ! Clean residual min=-0.002414 max=0.002819 Jy/beam ! Clean residual mean=0.000007 rms=0.000665 Jy/beam ! Combined flux in latest and established models = 0.0749338 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 0.0749338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091493Jy sigma=0.000664 ! Fit after self-cal, rms=0.091514Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-126.5, -98). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203661 Jy ! Component: 100 - total flux cleaned = 0.00219826 Jy ! Component: 150 - total flux cleaned = 0.00230298 Jy ! Component: 200 - total flux cleaned = 0.00233185 Jy ! Total flux subtracted in 200 components = 0.00233185 Jy ! Clean residual min=-0.002406 max=0.002484 Jy/beam ! Clean residual mean=0.000006 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0772657 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.0772657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091438Jy sigma=0.000664 ! Fit after self-cal, rms=0.091411Jy sigma=0.000664 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091411Jy sigma=0.000664 ! Fit after self-cal, rms=0.091663Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.225 mas, bmaj=8.455 mas, bpa=-6.747 degrees ! Estimated noise=1011.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000853533 Jy ! Component: 100 - total flux cleaned = 0.0010307 Jy ! Component: 150 - total flux cleaned = 0.00102991 Jy ! Component: 200 - total flux cleaned = 0.00105554 Jy ! Total flux subtracted in 200 components = 0.00105554 Jy ! Clean residual min=-0.002302 max=0.002463 Jy/beam ! Clean residual mean=0.000006 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.0783212 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 63 components and 0.0783212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091634Jy sigma=0.000663 ! Fit after self-cal, rms=0.091647Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000224747 Jy ! Component: 100 - total flux cleaned = 0.000198134 Jy ! Component: 150 - total flux cleaned = 0.000173857 Jy ! Component: 200 - total flux cleaned = 0.000128605 Jy ! Total flux subtracted in 200 components = 0.000128605 Jy ! Clean residual min=-0.002284 max=0.002483 Jy/beam ! Clean residual mean=0.000006 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.0784498 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 0.0784498 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091632Jy sigma=0.000663 ! Fit after self-cal, rms=0.091630Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091630Jy sigma=0.000663 ! Fit after self-cal, rms=0.091665Jy sigma=0.000663 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.795 mas, bmaj=17.87 mas, bpa=-4.367 degrees ! Estimated noise=1268.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000271167 Jy ! Component: 100 - total flux cleaned = 0.000310722 Jy ! Component: 150 - total flux cleaned = 0.000344494 Jy ! Component: 200 - total flux cleaned = 0.000373787 Jy ! Total flux subtracted in 200 components = 0.000373787 Jy ! Clean residual min=-0.002294 max=0.002320 Jy/beam ! Clean residual mean=0.000009 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.0788236 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 74 components and 0.0788236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091659Jy sigma=0.000663 ! Fit after self-cal, rms=0.091663Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.99978e-05 Jy ! Component: 100 - total flux cleaned = 6.14424e-06 Jy ! Component: 150 - total flux cleaned = -6.98479e-06 Jy ! Component: 200 - total flux cleaned = -1.99384e-05 Jy ! Total flux subtracted in 200 components = -1.99384e-05 Jy ! Clean residual min=-0.002308 max=0.002287 Jy/beam ! Clean residual mean=0.000009 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.0788037 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 83 components and 0.0788037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091661Jy sigma=0.000663 ! Fit after self-cal, rms=0.091657Jy sigma=0.000663 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=8.427 mas, bpa=-6.853 degrees ! Estimated noise=1011.75 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.217 x 8.427 at -6.853 degrees (North through East) ! Clean map min=-0.0024501 max=0.061879 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.409 mas, bmaj=7.004 mas, bpa=-8.384 degrees ! Estimated noise=1559.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0467609 Jy ! Component: 100 - total flux cleaned = 0.0597003 Jy ! Component: 150 - total flux cleaned = 0.0666975 Jy ! Component: 200 - total flux cleaned = 0.0716708 Jy ! Total flux subtracted in 200 components = 0.0716708 Jy ! Clean residual min=-0.004115 max=0.004559 Jy/beam ! Clean residual mean=0.000008 rms=0.001135 Jy/beam ! Combined flux in latest and established models = 0.0716708 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0716708 Jy ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=8.427 mas, bpa=-6.853 degrees ! Estimated noise=1011.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00346754 Jy ! Component: 100 - total flux cleaned = 0.00489452 Jy ! Component: 150 - total flux cleaned = 0.00565566 Jy ! Component: 200 - total flux cleaned = 0.00607253 Jy ! Total flux subtracted in 200 components = 0.00607253 Jy ! Clean residual min=-0.002519 max=0.002424 Jy/beam ! Clean residual mean=0.000005 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.0777434 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 41 components and 0.0777434 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.795 mas, bmaj=17.87 mas, bpa=-4.367 degrees ! Estimated noise=1268.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000876101 Jy ! Component: 100 - total flux cleaned = 0.000944659 Jy ! Component: 150 - total flux cleaned = 0.00100168 Jy ! Component: 200 - total flux cleaned = 0.00107205 Jy ! Total flux subtracted in 200 components = 0.00107205 Jy ! Clean residual min=-0.002310 max=0.002295 Jy/beam ! Clean residual mean=0.000009 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.0788154 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.04865e-05 Jy ! Component: 100 - total flux cleaned = 5.84304e-05 Jy ! Component: 150 - total flux cleaned = 7.39985e-05 Jy ! Component: 200 - total flux cleaned = 5.88852e-05 Jy ! Total flux subtracted in 200 components = 5.88852e-05 Jy ! Clean residual min=-0.002288 max=0.002279 Jy/beam ! Clean residual mean=0.000009 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 0.0788743 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 67 components and 0.0788743 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.217 mas, bmaj=8.427 mas, bpa=-6.853 degrees ! Estimated noise=1011.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.76213e-05 Jy ! Component: 100 - total flux cleaned = 0.000117332 Jy ! Component: 150 - total flux cleaned = 0.000116945 Jy ! Component: 200 - total flux cleaned = 2.86227e-05 Jy ! Total flux subtracted in 200 components = 2.86227e-05 Jy ! Clean residual min=-0.002289 max=0.002397 Jy/beam ! Clean residual mean=0.000006 rms=0.000633 Jy/beam ! Combined flux in latest and established models = 0.0789029 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 79 components and 0.0789029 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091665Jy sigma=0.000663 ! Fit after self-cal, rms=0.091665Jy sigma=0.000663 wmodel J0914-2038_S_2017_06_10_pus_map.mod ! Writing 79 model components to file: J0914-2038_S_2017_06_10_pus_map.mod wobs J0914-2038_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0914-2038_S_2017_06_10_pus_uvs.fits wwins J0914-2038_S_2017_06_10_pus_map.win ! wwins: Wrote 2 windows to J0914-2038_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000407282 Jy ! Component: 100 - total flux cleaned = 0.000780615 Jy ! Component: 150 - total flux cleaned = 0.0010212 Jy ! Component: 200 - total flux cleaned = 0.00129122 Jy ! Component: 250 - total flux cleaned = 0.00151599 Jy ! Component: 300 - total flux cleaned = 0.00173324 Jy ! Component: 350 - total flux cleaned = 0.00180354 Jy ! Component: 400 - total flux cleaned = 0.00194149 Jy ! Component: 450 - total flux cleaned = 0.00211035 Jy ! Component: 500 - total flux cleaned = 0.00214375 Jy ! Component: 550 - total flux cleaned = 0.00224137 Jy ! Component: 600 - total flux cleaned = 0.00227301 Jy ! Component: 650 - total flux cleaned = 0.00224278 Jy ! Component: 700 - total flux cleaned = 0.00236477 Jy ! Component: 750 - total flux cleaned = 0.00236427 Jy ! Component: 800 - total flux cleaned = 0.0023645 Jy ! Component: 850 - total flux cleaned = 0.00242249 Jy ! Component: 900 - total flux cleaned = 0.00239392 Jy ! Component: 950 - total flux cleaned = 0.00245069 Jy ! Component: 1000 - total flux cleaned = 0.00253414 Jy ! Component: 1050 - total flux cleaned = 0.00258909 Jy ! Component: 1100 - total flux cleaned = 0.00258904 Jy ! Component: 1150 - total flux cleaned = 0.00256243 Jy ! Component: 1200 - total flux cleaned = 0.00264176 Jy ! Component: 1250 - total flux cleaned = 0.00264142 Jy ! Component: 1300 - total flux cleaned = 0.00266708 Jy ! Component: 1350 - total flux cleaned = 0.00261624 Jy ! Component: 1400 - total flux cleaned = 0.00269173 Jy ! Component: 1450 - total flux cleaned = 0.00269163 Jy ! Component: 1500 - total flux cleaned = 0.00269146 Jy ! Component: 1550 - total flux cleaned = 0.00269159 Jy ! Component: 1600 - total flux cleaned = 0.00271593 Jy ! Component: 1650 - total flux cleaned = 0.00271572 Jy ! Component: 1700 - total flux cleaned = 0.00278638 Jy ! Component: 1750 - total flux cleaned = 0.00292657 Jy ! Component: 1800 - total flux cleaned = 0.00308832 Jy ! Component: 1850 - total flux cleaned = 0.00311072 Jy ! Component: 1900 - total flux cleaned = 0.00324667 Jy ! Component: 1950 - total flux cleaned = 0.00338155 Jy ! Component: 2000 - total flux cleaned = 0.00340377 Jy ! Component: 2050 - total flux cleaned = 0.00349209 Jy ! Component: 2100 - total flux cleaned = 0.00360185 Jy ! Component: 2150 - total flux cleaned = 0.00371017 Jy ! Component: 2200 - total flux cleaned = 0.00385999 Jy ! Component: 2250 - total flux cleaned = 0.00386004 Jy ! Component: 2300 - total flux cleaned = 0.0039864 Jy ! Component: 2350 - total flux cleaned = 0.00409066 Jy ! Component: 2400 - total flux cleaned = 0.00411139 Jy ! Component: 2450 - total flux cleaned = 0.00415245 Jy ! Component: 2500 - total flux cleaned = 0.00425433 Jy ! Component: 2550 - total flux cleaned = 0.00431462 Jy ! Component: 2600 - total flux cleaned = 0.00429472 Jy ! Component: 2650 - total flux cleaned = 0.00441368 Jy ! Component: 2700 - total flux cleaned = 0.00445306 Jy ! Component: 2750 - total flux cleaned = 0.00449213 Jy ! Component: 2800 - total flux cleaned = 0.00456987 Jy ! Component: 2850 - total flux cleaned = 0.00458921 Jy ! Component: 2900 - total flux cleaned = 0.00468463 Jy ! Component: 2950 - total flux cleaned = 0.00476048 Jy ! Component: 3000 - total flux cleaned = 0.00479801 Jy ! Component: 3050 - total flux cleaned = 0.00476067 Jy ! Component: 3100 - total flux cleaned = 0.00479807 Jy ! Component: 3150 - total flux cleaned = 0.00483506 Jy ! Component: 3200 - total flux cleaned = 0.00498136 Jy ! Component: 3250 - total flux cleaned = 0.00498136 Jy ! Component: 3300 - total flux cleaned = 0.00508907 Jy ! Component: 3350 - total flux cleaned = 0.00508912 Jy ! Component: 3400 - total flux cleaned = 0.00512459 Jy ! Component: 3450 - total flux cleaned = 0.00517743 Jy ! Component: 3500 - total flux cleaned = 0.00521256 Jy ! Component: 3550 - total flux cleaned = 0.00521251 Jy ! Component: 3600 - total flux cleaned = 0.00531655 Jy ! Component: 3650 - total flux cleaned = 0.00529931 Jy ! Component: 3700 - total flux cleaned = 0.00528235 Jy ! Component: 3750 - total flux cleaned = 0.0053334 Jy ! Component: 3800 - total flux cleaned = 0.0052997 Jy ! Component: 3850 - total flux cleaned = 0.00536675 Jy ! Component: 3900 - total flux cleaned = 0.00533364 Jy ! Component: 3950 - total flux cleaned = 0.00535024 Jy ! Component: 4000 - total flux cleaned = 0.00538309 Jy ! Component: 4050 - total flux cleaned = 0.00539949 Jy ! Total flux subtracted in 4096 components = 0.00538335 Jy ! Clean residual min=-0.001039 max=0.001042 Jy/beam ! Clean residual mean=0.000004 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.0842863 Jy keep ! Adding 259 model components to the UV plane model. ! The established model now contains 338 components and 0.0842863 Jy ![Exited script file: muppet] wmap "J0914-2038_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.217 x 8.427 at -6.853 degrees (North through East) ! Clean map min=-0.0021458 max=0.061335 Jy/beam ! Writing clean map to FITS file: J0914-2038_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.061335 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000289794 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.41743 1.41743 2.83487 5.66974 11.3395 22.6789 45.3579 90.7158 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.061 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.217 x 8.427 at -6.853 degrees (North through East) ! Clean map min=-0.0021458 max=0.061335 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0914-2038_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:49:41 2019