! Started logfile: J0914+0245_S_2017_08_05_pus_uvs.log on Thu May 9 19:25:22 2019 obs J0914+0245_S_2017_08_05_pus_uva.fits ! Reading UV FITS file: J0914+0245_S_2017_08_05_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.716239 visibilities/baseline/integration-bin. ! Found source: J0914+0245 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 513 lines of history. ! ! Reading 1676 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0914+0245_S_2017_08_05_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 87 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.616875Jy sigma=0.005809 ! Fit after self-cal, rms=0.590570Jy sigma=0.005565 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.505 mas, bmaj=7.549 mas, bpa=-4.779 degrees ! Estimated noise=2418.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.315004 Jy ! Component: 100 - total flux cleaned = 0.398036 Jy ! Total flux subtracted in 100 components = 0.398036 Jy ! Clean residual min=-0.019529 max=0.034540 Jy/beam ! Clean residual mean=0.000076 rms=0.006396 Jy/beam ! Combined flux in latest and established models = 0.398036 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.398036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110533Jy sigma=0.000948 ! Fit after self-cal, rms=0.110508Jy sigma=0.000947 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.823 mas, bmaj=8.391 mas, bpa=-4.968 degrees ! Estimated noise=2107.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0423092 Jy ! Component: 100 - total flux cleaned = 0.0626048 Jy ! Component: 150 - total flux cleaned = 0.0743256 Jy ! Component: 200 - total flux cleaned = 0.0814444 Jy ! Total flux subtracted in 200 components = 0.0814444 Jy ! Clean residual min=-0.012872 max=0.018657 Jy/beam ! Clean residual mean=0.000061 rms=0.003841 Jy/beam ! Combined flux in latest and established models = 0.47948 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 43 components and 0.47948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091815Jy sigma=0.000803 ! Fit after self-cal, rms=0.091785Jy sigma=0.000803 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 0.94 KP 1.06 ! LA 1.01 MK 0.95 NL 0.95 OV 1.01 ! PT 0.99 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 0.97 KP 1.03 ! LA 0.98 MK 0.98 NL 1.19 OV 1.04 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 0.98 KP 0.90 ! LA 0.79 MK 0.98 NL 1.25 OV 0.96 ! PT 0.97 SC 1.04 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.94 KP 1.00* ! LA 1.00* MK 1.42 NL 1.00* OV 1.00* ! PT 1.02 SC 1.00* ! ! ! Fit before self-cal, rms=0.091785Jy sigma=0.000803 ! Fit after self-cal, rms=0.074196Jy sigma=0.000669 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.833 mas, bmaj=8.466 mas, bpa=-4.904 degrees ! Estimated noise=2101.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (57.5, 90.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0079945 Jy ! Component: 100 - total flux cleaned = 0.0116114 Jy ! Component: 150 - total flux cleaned = 0.0121735 Jy ! Component: 200 - total flux cleaned = 0.0123181 Jy ! Total flux subtracted in 200 components = 0.0123181 Jy ! Clean residual min=-0.005107 max=0.005091 Jy/beam ! Clean residual mean=-0.000008 rms=0.001244 Jy/beam ! Combined flux in latest and established models = 0.491798 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 66 components and 0.491798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073349Jy sigma=0.000662 ! Fit after self-cal, rms=0.073312Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073312Jy sigma=0.000661 ! Fit after self-cal, rms=0.073172Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.833 mas, bmaj=8.461 mas, bpa=-4.867 degrees ! Estimated noise=2098.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135223 Jy ! Component: 100 - total flux cleaned = 0.00136267 Jy ! Component: 150 - total flux cleaned = 0.00115882 Jy ! Component: 200 - total flux cleaned = 0.00106392 Jy ! Total flux subtracted in 200 components = 0.00106392 Jy ! Clean residual min=-0.004858 max=0.005020 Jy/beam ! Clean residual mean=-0.000005 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.492862 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 85 components and 0.492862 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073084Jy sigma=0.000660 ! Fit after self-cal, rms=0.073083Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-64.5, 104.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394244 Jy ! Component: 100 - total flux cleaned = 0.00443938 Jy ! Component: 150 - total flux cleaned = 0.00484834 Jy ! Component: 200 - total flux cleaned = 0.0049023 Jy ! Total flux subtracted in 200 components = 0.0049023 Jy ! Clean residual min=-0.004247 max=0.004159 Jy/beam ! Clean residual mean=-0.000006 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.497764 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 101 components and 0.497764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072841Jy sigma=0.000658 ! Fit after self-cal, rms=0.072836Jy sigma=0.000658 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072836Jy sigma=0.000658 ! Fit after self-cal, rms=0.072857Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.835 mas, bmaj=8.462 mas, bpa=-4.865 degrees ! Estimated noise=2098.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107085 Jy ! Component: 100 - total flux cleaned = 0.00112547 Jy ! Component: 150 - total flux cleaned = 0.000988272 Jy ! Component: 200 - total flux cleaned = 0.000816568 Jy ! Total flux subtracted in 200 components = 0.000816568 Jy ! Clean residual min=-0.004216 max=0.004028 Jy/beam ! Clean residual mean=-0.000005 rms=0.001017 Jy/beam ! Combined flux in latest and established models = 0.498581 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 114 components and 0.498581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072794Jy sigma=0.000657 ! Fit after self-cal, rms=0.072796Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000631782 Jy ! Component: 100 - total flux cleaned = 0.000509629 Jy ! Component: 150 - total flux cleaned = 0.00035429 Jy ! Component: 200 - total flux cleaned = 0.000242501 Jy ! Total flux subtracted in 200 components = 0.000242501 Jy ! Clean residual min=-0.004143 max=0.003945 Jy/beam ! Clean residual mean=-0.000005 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.498823 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 126 components and 0.498823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072754Jy sigma=0.000657 ! Fit after self-cal, rms=0.072756Jy sigma=0.000657 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072756Jy sigma=0.000657 ! Fit after self-cal, rms=0.072789Jy sigma=0.000657 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.071 mas, bmaj=15.26 mas, bpa=-8.816 degrees ! Estimated noise=2772.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.82519e-05 Jy ! Component: 100 - total flux cleaned = -3.97714e-05 Jy ! Component: 150 - total flux cleaned = -0.000276366 Jy ! Component: 200 - total flux cleaned = -0.000454313 Jy ! Total flux subtracted in 200 components = -0.000454313 Jy ! Clean residual min=-0.003786 max=0.004840 Jy/beam ! Clean residual mean=-0.000009 rms=0.001288 Jy/beam ! Combined flux in latest and established models = 0.498369 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 140 components and 0.498369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072765Jy sigma=0.000657 ! Fit after self-cal, rms=0.072766Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000182288 Jy ! Component: 100 - total flux cleaned = 2.08781e-05 Jy ! Component: 150 - total flux cleaned = -0.000126794 Jy ! Component: 200 - total flux cleaned = -0.000289347 Jy ! Total flux subtracted in 200 components = -0.000289347 Jy ! Clean residual min=-0.003767 max=0.004695 Jy/beam ! Clean residual mean=-0.000007 rms=0.001254 Jy/beam ! Combined flux in latest and established models = 0.49808 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 147 components and 0.49808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072759Jy sigma=0.000657 ! Fit after self-cal, rms=0.072761Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.836 mas, bmaj=8.462 mas, bpa=-4.86 degrees ! Estimated noise=2099.27 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.836 x 8.462 at -4.86 degrees (North through East) ! Clean map min=-0.0038918 max=0.40838 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.516 mas, bmaj=7.626 mas, bpa=-4.688 degrees ! Estimated noise=2415.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.314256 Jy ! Component: 100 - total flux cleaned = 0.395566 Jy ! Component: 150 - total flux cleaned = 0.430234 Jy ! Component: 200 - total flux cleaned = 0.447694 Jy ! Total flux subtracted in 200 components = 0.447694 Jy ! Clean residual min=-0.008808 max=0.010962 Jy/beam ! Clean residual mean=0.000026 rms=0.002444 Jy/beam ! Combined flux in latest and established models = 0.447694 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.447694 Jy ! Inverting map and beam ! Estimated beam: bmin=2.836 mas, bmaj=8.462 mas, bpa=-4.86 degrees ! Estimated noise=2099.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138778 Jy ! Component: 100 - total flux cleaned = 0.023023 Jy ! Component: 150 - total flux cleaned = 0.0297568 Jy ! Component: 200 - total flux cleaned = 0.0348914 Jy ! Total flux subtracted in 200 components = 0.0348914 Jy ! Clean residual min=-0.005034 max=0.005032 Jy/beam ! Clean residual mean=0.000010 rms=0.001292 Jy/beam ! Combined flux in latest and established models = 0.482585 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 58 components and 0.482585 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.071 mas, bmaj=15.26 mas, bpa=-8.816 degrees ! Estimated noise=2772.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00598391 Jy ! Component: 100 - total flux cleaned = 0.00956357 Jy ! Component: 150 - total flux cleaned = 0.0118918 Jy ! Component: 200 - total flux cleaned = 0.0135805 Jy ! Total flux subtracted in 200 components = 0.0135805 Jy ! Clean residual min=-0.004191 max=0.004402 Jy/beam ! Clean residual mean=-0.000001 rms=0.001320 Jy/beam ! Combined flux in latest and established models = 0.496166 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000395972 Jy ! Component: 100 - total flux cleaned = 0.000498218 Jy ! Component: 150 - total flux cleaned = 0.000547151 Jy ! Component: 200 - total flux cleaned = 0.00063753 Jy ! Total flux subtracted in 200 components = 0.00063753 Jy ! Clean residual min=-0.004073 max=0.004363 Jy/beam ! Clean residual mean=-0.000002 rms=0.001267 Jy/beam ! Combined flux in latest and established models = 0.496803 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 107 components and 0.496803 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.836 mas, bmaj=8.462 mas, bpa=-4.86 degrees ! Estimated noise=2099.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000973129 Jy ! Component: 100 - total flux cleaned = 0.00120908 Jy ! Component: 150 - total flux cleaned = 0.00127948 Jy ! Component: 200 - total flux cleaned = 0.00133623 Jy ! Total flux subtracted in 200 components = 0.00133623 Jy ! Clean residual min=-0.003907 max=0.004081 Jy/beam ! Clean residual mean=-0.000002 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.498139 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 119 components and 0.498139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072921Jy sigma=0.000658 ! Fit after self-cal, rms=0.072894Jy sigma=0.000657 wmodel J0914+0245_S_2017_08_05_pus_map.mod ! Writing 119 model components to file: J0914+0245_S_2017_08_05_pus_map.mod wobs J0914+0245_S_2017_08_05_pus_uvs.fits ! Writing UV FITS file: J0914+0245_S_2017_08_05_pus_uvs.fits wwins J0914+0245_S_2017_08_05_pus_map.win ! wwins: Wrote 3 windows to J0914+0245_S_2017_08_05_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.42732e-06 Jy ! Component: 100 - total flux cleaned = -0.000313016 Jy ! Component: 150 - total flux cleaned = -0.00091404 Jy ! Component: 200 - total flux cleaned = -0.00142774 Jy ! Component: 250 - total flux cleaned = -0.00196815 Jy ! Component: 300 - total flux cleaned = -0.0022757 Jy ! Component: 350 - total flux cleaned = -0.00247431 Jy ! Component: 400 - total flux cleaned = -0.00256956 Jy ! Component: 450 - total flux cleaned = -0.00266183 Jy ! Component: 500 - total flux cleaned = -0.00279543 Jy ! Component: 550 - total flux cleaned = -0.00283897 Jy ! Component: 600 - total flux cleaned = -0.00304948 Jy ! Component: 650 - total flux cleaned = -0.00313139 Jy ! Component: 700 - total flux cleaned = -0.00345029 Jy ! Component: 750 - total flux cleaned = -0.00356661 Jy ! Component: 800 - total flux cleaned = -0.00375736 Jy ! Component: 850 - total flux cleaned = -0.00383284 Jy ! Component: 900 - total flux cleaned = -0.00408853 Jy ! Component: 950 - total flux cleaned = -0.0041606 Jy ! Component: 1000 - total flux cleaned = -0.00430024 Jy ! Component: 1050 - total flux cleaned = -0.00443672 Jy ! Component: 1100 - total flux cleaned = -0.0046036 Jy ! Component: 1150 - total flux cleaned = -0.00479948 Jy ! Component: 1200 - total flux cleaned = -0.00489564 Jy ! Component: 1250 - total flux cleaned = -0.00511654 Jy ! Component: 1300 - total flux cleaned = -0.00527159 Jy ! Component: 1350 - total flux cleaned = -0.00554516 Jy ! Component: 1400 - total flux cleaned = -0.0056648 Jy ! Component: 1450 - total flux cleaned = -0.00595908 Jy ! Component: 1500 - total flux cleaned = -0.0061034 Jy ! Component: 1550 - total flux cleaned = -0.00630273 Jy ! Component: 1600 - total flux cleaned = -0.00647098 Jy ! Component: 1650 - total flux cleaned = -0.0067477 Jy ! Component: 1700 - total flux cleaned = -0.0068839 Jy ! Component: 1750 - total flux cleaned = -0.00704556 Jy ! Component: 1800 - total flux cleaned = -0.00723145 Jy ! Component: 1850 - total flux cleaned = -0.00738819 Jy ! Component: 1900 - total flux cleaned = -0.00751695 Jy ! Component: 1950 - total flux cleaned = -0.0076695 Jy ! Component: 2000 - total flux cleaned = -0.0077702 Jy ! Component: 2050 - total flux cleaned = -0.00789475 Jy ! Component: 2100 - total flux cleaned = -0.00804264 Jy ! Component: 2150 - total flux cleaned = -0.00818854 Jy ! Component: 2200 - total flux cleaned = -0.00826052 Jy ! Component: 2250 - total flux cleaned = -0.00837951 Jy ! Component: 2300 - total flux cleaned = -0.00852101 Jy ! Component: 2350 - total flux cleaned = -0.00859097 Jy ! Component: 2400 - total flux cleaned = -0.00868336 Jy ! Component: 2450 - total flux cleaned = -0.00886622 Jy ! Component: 2500 - total flux cleaned = -0.00891137 Jy ! Component: 2550 - total flux cleaned = -0.00897874 Jy ! Component: 2600 - total flux cleaned = -0.00904526 Jy ! Component: 2650 - total flux cleaned = -0.00917748 Jy ! Component: 2700 - total flux cleaned = -0.00928654 Jy ! Component: 2750 - total flux cleaned = -0.00937329 Jy ! Component: 2800 - total flux cleaned = -0.00941612 Jy ! Component: 2850 - total flux cleaned = -0.00945882 Jy ! Component: 2900 - total flux cleaned = -0.00948005 Jy ! Component: 2950 - total flux cleaned = -0.00947996 Jy ! Component: 3000 - total flux cleaned = -0.0094378 Jy ! Component: 3050 - total flux cleaned = -0.00945883 Jy ! Component: 3100 - total flux cleaned = -0.00947965 Jy ! Component: 3150 - total flux cleaned = -0.00945881 Jy ! Component: 3200 - total flux cleaned = -0.00939653 Jy ! Component: 3250 - total flux cleaned = -0.00939652 Jy ! Component: 3300 - total flux cleaned = -0.00935534 Jy ! Component: 3350 - total flux cleaned = -0.00933476 Jy ! Component: 3400 - total flux cleaned = -0.00929371 Jy ! Component: 3450 - total flux cleaned = -0.0092326 Jy ! Component: 3500 - total flux cleaned = -0.00921224 Jy ! Component: 3550 - total flux cleaned = -0.00915125 Jy ! Component: 3600 - total flux cleaned = -0.00911062 Jy ! Component: 3650 - total flux cleaned = -0.00909047 Jy ! Component: 3700 - total flux cleaned = -0.00905001 Jy ! Component: 3750 - total flux cleaned = -0.00905008 Jy ! Component: 3800 - total flux cleaned = -0.00900973 Jy ! Component: 3850 - total flux cleaned = -0.00894938 Jy ! Component: 3900 - total flux cleaned = -0.00886897 Jy ! Component: 3950 - total flux cleaned = -0.00880871 Jy ! Component: 4000 - total flux cleaned = -0.00878866 Jy ! Component: 4050 - total flux cleaned = -0.00872849 Jy ! Total flux subtracted in 4096 components = -0.00870862 Jy ! Clean residual min=-0.001524 max=0.001108 Jy/beam ! Clean residual mean=0.000002 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 0.489431 Jy keep ! Adding 222 model components to the UV plane model. ! The established model now contains 341 components and 0.48943 Jy ![Exited script file: muppet] wmap "J0914+0245_S_2017_08_05_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.836 x 8.462 at -4.86 degrees (North through East) ! Clean map min=-0.0024313 max=0.40741 Jy/beam ! Writing clean map to FITS file: J0914+0245_S_2017_08_05_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.407412 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000311419 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.229315 0.229315 0.45863 0.91726 1.83452 3.66904 7.33808 14.6762 29.3523 58.7047 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.407 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.836 x 8.462 at -4.86 degrees (North through East) ! Clean map min=-0.0024313 max=0.40741 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0914+0245_S_2017_08_05_pus_uvs.log closed on Thu May 9 19:25:28 2019