! Started logfile: J0914+0245_S_2017_05_27_pus_uvs.log on Fri May 3 11:03:36 2019 obs J0914+0245_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0914+0245_S_2017_05_27_pus_uva.fits ! AN table 1: 22 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.816162 visibilities/baseline/integration-bin. ! Found source: J0914+0245 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 3232 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0914+0245_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 136 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.500453Jy sigma=0.004160 ! Fit after self-cal, rms=0.489264Jy sigma=0.004078 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.845 mas, bmaj=7.132 mas, bpa=1.635 degrees ! Estimated noise=2194.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.410665 Jy ! Component: 100 - total flux cleaned = 0.510878 Jy ! Total flux subtracted in 100 components = 0.510878 Jy ! Clean residual min=-0.031038 max=0.038225 Jy/beam ! Clean residual mean=0.000001 rms=0.006743 Jy/beam ! Combined flux in latest and established models = 0.510878 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.510878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241193Jy sigma=0.000982 ! Fit after self-cal, rms=0.241188Jy sigma=0.000982 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.39 mas, bmaj=8.263 mas, bpa=1.017 degrees ! Estimated noise=1818.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.037937 Jy ! Component: 100 - total flux cleaned = 0.0527908 Jy ! Component: 150 - total flux cleaned = 0.0539402 Jy ! Component: 200 - total flux cleaned = 0.0544452 Jy ! Total flux subtracted in 200 components = 0.0544452 Jy ! Clean residual min=-0.028392 max=0.018904 Jy/beam ! Clean residual mean=-0.000054 rms=0.004695 Jy/beam ! Combined flux in latest and established models = 0.565324 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 33 components and 0.565323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227143Jy sigma=0.000931 ! Fit after self-cal, rms=0.227112Jy sigma=0.000931 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.95 HN 1.01 KP 1.01 ! LA 1.00 MK 0.96 NL 0.92 OV 1.02 ! PT 1.07 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.07 KP 0.98 ! LA 0.97 MK 0.94 NL 1.08 OV 1.05 ! PT 1.03 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.44 FD 1.02 HN 1.03 KP 1.02 ! LA 1.00 MK 0.99 NL 1.00 OV 0.95 ! PT 1.02 SC 1.10 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.03 KP 1.00* ! LA 1.03 MK 1.19 NL 1.00* OV 1.00* ! PT 1.05 SC 1.00* ! ! ! Fit before self-cal, rms=0.227112Jy sigma=0.000931 ! Fit after self-cal, rms=0.094888Jy sigma=0.000712 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.429 mas, bmaj=8.187 mas, bpa=0.997 degrees ! Estimated noise=1799.07 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0089711 Jy ! Component: 100 - total flux cleaned = 0.00979245 Jy ! Component: 150 - total flux cleaned = 0.0100355 Jy ! Component: 200 - total flux cleaned = 0.0102289 Jy ! Total flux subtracted in 200 components = 0.0102289 Jy ! Clean residual min=-0.007682 max=0.008761 Jy/beam ! Clean residual mean=-0.000041 rms=0.002060 Jy/beam ! Combined flux in latest and established models = 0.575552 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 51 components and 0.575552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093158Jy sigma=0.000699 ! Fit after self-cal, rms=0.092954Jy sigma=0.000698 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092954Jy sigma=0.000698 ! Fit after self-cal, rms=0.087984Jy sigma=0.000673 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.428 mas, bmaj=8.18 mas, bpa=1.085 degrees ! Estimated noise=1799.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241804 Jy ! Component: 100 - total flux cleaned = 0.00293989 Jy ! Component: 150 - total flux cleaned = 0.00308318 Jy ! Component: 200 - total flux cleaned = 0.00321776 Jy ! Total flux subtracted in 200 components = 0.00321776 Jy ! Clean residual min=-0.005302 max=0.005898 Jy/beam ! Clean residual mean=-0.000009 rms=0.001320 Jy/beam ! Combined flux in latest and established models = 0.57877 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 59 components and 0.57877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087364Jy sigma=0.000668 ! Fit after self-cal, rms=0.087335Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (76.5, 78.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00478419 Jy ! Component: 100 - total flux cleaned = 0.0056185 Jy ! Component: 150 - total flux cleaned = 0.00585685 Jy ! Component: 200 - total flux cleaned = 0.00597119 Jy ! Total flux subtracted in 200 components = 0.00597119 Jy ! Clean residual min=-0.005041 max=0.005184 Jy/beam ! Clean residual mean=-0.000007 rms=0.001186 Jy/beam ! Combined flux in latest and established models = 0.584741 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 74 components and 0.584741 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086877Jy sigma=0.000664 ! Fit after self-cal, rms=0.086880Jy sigma=0.000664 ! Inverting map ! Added new window around map position (-5.5, 25). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00361533 Jy ! Component: 100 - total flux cleaned = 0.00454054 Jy ! Component: 150 - total flux cleaned = 0.00484699 Jy ! Component: 200 - total flux cleaned = 0.00484859 Jy ! Total flux subtracted in 200 components = 0.00484859 Jy ! Clean residual min=-0.004610 max=0.004572 Jy/beam ! Clean residual mean=-0.000007 rms=0.001069 Jy/beam ! Combined flux in latest and established models = 0.58959 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 94 components and 0.58959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086552Jy sigma=0.000662 ! Fit after self-cal, rms=0.086549Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086549Jy sigma=0.000662 ! Fit after self-cal, rms=0.086331Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.429 mas, bmaj=8.171 mas, bpa=1.124 degrees ! Estimated noise=1797.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173123 Jy ! Component: 100 - total flux cleaned = 0.00234509 Jy ! Component: 150 - total flux cleaned = 0.00242478 Jy ! Component: 200 - total flux cleaned = 0.00258453 Jy ! Total flux subtracted in 200 components = 0.00258453 Jy ! Clean residual min=-0.004276 max=0.004544 Jy/beam ! Clean residual mean=-0.000006 rms=0.000998 Jy/beam ! Combined flux in latest and established models = 0.592174 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 112 components and 0.592174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086166Jy sigma=0.000660 ! Fit after self-cal, rms=0.086164Jy sigma=0.000660 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-45.5, 11). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236005 Jy ! Component: 100 - total flux cleaned = 0.00236122 Jy ! Component: 150 - total flux cleaned = 0.0027846 Jy ! Component: 200 - total flux cleaned = 0.00309307 Jy ! Total flux subtracted in 200 components = 0.00309307 Jy ! Clean residual min=-0.003805 max=0.003788 Jy/beam ! Clean residual mean=-0.000007 rms=0.000912 Jy/beam ! Combined flux in latest and established models = 0.595267 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 132 components and 0.595268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085910Jy sigma=0.000658 ! Fit after self-cal, rms=0.085904Jy sigma=0.000658 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085904Jy sigma=0.000658 ! Fit after self-cal, rms=0.085799Jy sigma=0.000658 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.552 mas, bmaj=12.91 mas, bpa=-5.621 degrees ! Estimated noise=2251.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000868091 Jy ! Component: 100 - total flux cleaned = 0.00113319 Jy ! Component: 150 - total flux cleaned = 0.00118974 Jy ! Component: 200 - total flux cleaned = 0.00135886 Jy ! Total flux subtracted in 200 components = 0.00135886 Jy ! Clean residual min=-0.003529 max=0.003455 Jy/beam ! Clean residual mean=-0.000011 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.596626 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 153 components and 0.596626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085743Jy sigma=0.000657 ! Fit after self-cal, rms=0.085742Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000421066 Jy ! Component: 100 - total flux cleaned = 0.00067598 Jy ! Component: 150 - total flux cleaned = 0.000771429 Jy ! Component: 200 - total flux cleaned = 0.000904021 Jy ! Total flux subtracted in 200 components = 0.000904021 Jy ! Clean residual min=-0.003341 max=0.003300 Jy/beam ! Clean residual mean=-0.000011 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.59753 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 166 components and 0.59753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085705Jy sigma=0.000657 ! Fit after self-cal, rms=0.085704Jy sigma=0.000657 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.431 mas, bmaj=8.169 mas, bpa=1.15 degrees ! Estimated noise=1795.79 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.431 x 8.169 at 1.15 degrees (North through East) ! Clean map min=-0.0060441 max=0.52763 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085704Jy sigma=0.000657 ! Fit after self-cal, rms=0.079230Jy sigma=0.000602 ! Inverting map and beam ! Estimated beam: bmin=3.432 mas, bmaj=8.172 mas, bpa=1.163 degrees ! Estimated noise=1796.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000991259 Jy ! Component: 100 - total flux cleaned = 0.0012681 Jy ! Component: 150 - total flux cleaned = 0.00165027 Jy ! Component: 200 - total flux cleaned = 0.00188602 Jy ! Total flux subtracted in 200 components = 0.00188602 Jy ! Clean residual min=-0.003370 max=0.003473 Jy/beam ! Clean residual mean=-0.000006 rms=0.000842 Jy/beam ! Combined flux in latest and established models = 0.599416 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 179 components and 0.599416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079119Jy sigma=0.000601 ! Fit after self-cal, rms=0.079119Jy sigma=0.000601 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000259712 Jy ! Component: 100 - total flux cleaned = 0.000312959 Jy ! Component: 150 - total flux cleaned = 0.000364327 Jy ! Component: 200 - total flux cleaned = 0.000364565 Jy ! Total flux subtracted in 200 components = 0.000364565 Jy ! Clean residual min=-0.003343 max=0.003430 Jy/beam ! Clean residual mean=-0.000006 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.599781 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 193 components and 0.599781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079050Jy sigma=0.000601 ! Fit after self-cal, rms=0.079052Jy sigma=0.000601 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079052Jy sigma=0.000601 ! Fit after self-cal, rms=0.079030Jy sigma=0.000601 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.898 mas, bmaj=7.076 mas, bpa=1.904 degrees ! Estimated noise=2144.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.400853 Jy ! Component: 100 - total flux cleaned = 0.496396 Jy ! Component: 150 - total flux cleaned = 0.533983 Jy ! Component: 200 - total flux cleaned = 0.553589 Jy ! Total flux subtracted in 200 components = 0.553589 Jy ! Clean residual min=-0.008347 max=0.009881 Jy/beam ! Clean residual mean=0.000003 rms=0.001967 Jy/beam ! Combined flux in latest and established models = 0.553589 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.553589 Jy ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=8.17 mas, bpa=1.188 degrees ! Estimated noise=1795.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132131 Jy ! Component: 100 - total flux cleaned = 0.0210979 Jy ! Component: 150 - total flux cleaned = 0.027277 Jy ! Component: 200 - total flux cleaned = 0.0318012 Jy ! Total flux subtracted in 200 components = 0.0318012 Jy ! Clean residual min=-0.004820 max=0.005774 Jy/beam ! Clean residual mean=-0.000001 rms=0.001254 Jy/beam ! Combined flux in latest and established models = 0.58539 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 54 components and 0.58539 Jy ! Inverting map ! Added new window around map position (88, -116.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00454013 Jy ! Component: 100 - total flux cleaned = 0.00631951 Jy ! Component: 150 - total flux cleaned = 0.00748204 Jy ! Component: 200 - total flux cleaned = 0.00855786 Jy ! Total flux subtracted in 200 components = 0.00855786 Jy ! Clean residual min=-0.004029 max=0.004611 Jy/beam ! Clean residual mean=-0.000009 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.593948 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 81 components and 0.593948 Jy ! Inverting map ! Added new window around map position (-91, -68). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0027523 Jy ! Component: 100 - total flux cleaned = 0.00262874 Jy ! Component: 150 - total flux cleaned = 0.00252051 Jy ! Component: 200 - total flux cleaned = 0.00293832 Jy ! Total flux subtracted in 200 components = 0.00293832 Jy ! Clean residual min=-0.003536 max=0.003529 Jy/beam ! Clean residual mean=-0.000008 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.596886 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 104 components and 0.596886 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.553 mas, bmaj=12.92 mas, bpa=-5.612 degrees ! Estimated noise=2249.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000991558 Jy ! Component: 100 - total flux cleaned = 0.00179916 Jy ! Component: 150 - total flux cleaned = 0.00258965 Jy ! Component: 200 - total flux cleaned = 0.00321768 Jy ! Total flux subtracted in 200 components = 0.00321768 Jy ! Clean residual min=-0.003667 max=0.003329 Jy/beam ! Clean residual mean=-0.000017 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.600104 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000215084 Jy ! Component: 100 - total flux cleaned = 0.000479239 Jy ! Component: 150 - total flux cleaned = 0.000600709 Jy ! Component: 200 - total flux cleaned = 0.000656538 Jy ! Total flux subtracted in 200 components = 0.000656538 Jy ! Clean residual min=-0.003521 max=0.003060 Jy/beam ! Clean residual mean=-0.000018 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.60076 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 143 components and 0.60076 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.433 mas, bmaj=8.17 mas, bpa=1.188 degrees ! Estimated noise=1795.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000657494 Jy ! Component: 100 - total flux cleaned = -0.000844916 Jy ! Component: 150 - total flux cleaned = -0.00092792 Jy ! Component: 200 - total flux cleaned = -0.000763886 Jy ! Total flux subtracted in 200 components = -0.000763886 Jy ! Clean residual min=-0.003215 max=0.003174 Jy/beam ! Clean residual mean=-0.000008 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.599996 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 165 components and 0.599996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078914Jy sigma=0.000600 ! Fit after self-cal, rms=0.078859Jy sigma=0.000599 wmodel J0914+0245_S_2017_05_27_pus_map.mod ! Writing 165 model components to file: J0914+0245_S_2017_05_27_pus_map.mod wobs J0914+0245_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0914+0245_S_2017_05_27_pus_uvs.fits wwins J0914+0245_S_2017_05_27_pus_map.win ! wwins: Wrote 7 windows to J0914+0245_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00134236 Jy ! Component: 100 - total flux cleaned = -0.0023375 Jy ! Component: 150 - total flux cleaned = -0.00281225 Jy ! Component: 200 - total flux cleaned = -0.00291376 Jy ! Component: 250 - total flux cleaned = -0.00301067 Jy ! Component: 300 - total flux cleaned = -0.00296309 Jy ! Component: 350 - total flux cleaned = -0.00296268 Jy ! Component: 400 - total flux cleaned = -0.00300803 Jy ! Component: 450 - total flux cleaned = -0.00309708 Jy ! Component: 500 - total flux cleaned = -0.00314072 Jy ! Component: 550 - total flux cleaned = -0.00314002 Jy ! Component: 600 - total flux cleaned = -0.00305652 Jy ! Component: 650 - total flux cleaned = -0.00297408 Jy ! Component: 700 - total flux cleaned = -0.00289313 Jy ! Component: 750 - total flux cleaned = -0.00273515 Jy ! Component: 800 - total flux cleaned = -0.00261873 Jy ! Component: 850 - total flux cleaned = -0.00250412 Jy ! Component: 900 - total flux cleaned = -0.00242977 Jy ! Component: 950 - total flux cleaned = -0.00246658 Jy ! Component: 1000 - total flux cleaned = -0.00235722 Jy ! Component: 1050 - total flux cleaned = -0.0023572 Jy ! Component: 1100 - total flux cleaned = -0.00225096 Jy ! Component: 1150 - total flux cleaned = -0.00225157 Jy ! Component: 1200 - total flux cleaned = -0.00218286 Jy ! Component: 1250 - total flux cleaned = -0.00214943 Jy ! Component: 1300 - total flux cleaned = -0.00215004 Jy ! Component: 1350 - total flux cleaned = -0.00215044 Jy ! Component: 1400 - total flux cleaned = -0.00208496 Jy ! Component: 1450 - total flux cleaned = -0.0020849 Jy ! Component: 1500 - total flux cleaned = -0.00205293 Jy ! Component: 1550 - total flux cleaned = -0.00208509 Jy ! Component: 1600 - total flux cleaned = -0.00208523 Jy ! Component: 1650 - total flux cleaned = -0.00199211 Jy ! Component: 1700 - total flux cleaned = -0.00202298 Jy ! Component: 1750 - total flux cleaned = -0.00193138 Jy ! Component: 1800 - total flux cleaned = -0.00193143 Jy ! Component: 1850 - total flux cleaned = -0.00193144 Jy ! Component: 1900 - total flux cleaned = -0.00187176 Jy ! Component: 1950 - total flux cleaned = -0.00184234 Jy ! Component: 2000 - total flux cleaned = -0.00175509 Jy ! Component: 2050 - total flux cleaned = -0.00181305 Jy ! Component: 2100 - total flux cleaned = -0.0018414 Jy ! Component: 2150 - total flux cleaned = -0.00184103 Jy ! Component: 2200 - total flux cleaned = -0.0018409 Jy ! Component: 2250 - total flux cleaned = -0.00184073 Jy ! Component: 2300 - total flux cleaned = -0.00184067 Jy ! Component: 2350 - total flux cleaned = -0.00181332 Jy ! Component: 2400 - total flux cleaned = -0.00186706 Jy ! Component: 2450 - total flux cleaned = -0.00181302 Jy ! Component: 2500 - total flux cleaned = -0.00178648 Jy ! Component: 2550 - total flux cleaned = -0.00178644 Jy ! Component: 2600 - total flux cleaned = -0.00178632 Jy ! Component: 2650 - total flux cleaned = -0.00176029 Jy ! Component: 2700 - total flux cleaned = -0.00183773 Jy ! Component: 2750 - total flux cleaned = -0.00181244 Jy ! Component: 2800 - total flux cleaned = -0.00199036 Jy ! Component: 2850 - total flux cleaned = -0.00193975 Jy ! Component: 2900 - total flux cleaned = -0.00193986 Jy ! Component: 2950 - total flux cleaned = -0.00201446 Jy ! Component: 3000 - total flux cleaned = -0.00203943 Jy ! Component: 3050 - total flux cleaned = -0.00208824 Jy ! Component: 3100 - total flux cleaned = -0.00216091 Jy ! Component: 3150 - total flux cleaned = -0.0020886 Jy ! Component: 3200 - total flux cleaned = -0.00230361 Jy ! Component: 3250 - total flux cleaned = -0.00230351 Jy ! Component: 3300 - total flux cleaned = -0.0022799 Jy ! Component: 3350 - total flux cleaned = -0.00242019 Jy ! Component: 3400 - total flux cleaned = -0.00242019 Jy ! Component: 3450 - total flux cleaned = -0.00255883 Jy ! Component: 3500 - total flux cleaned = -0.00255903 Jy ! Component: 3550 - total flux cleaned = -0.00267304 Jy ! Component: 3600 - total flux cleaned = -0.00274111 Jy ! Component: 3650 - total flux cleaned = -0.00285345 Jy ! Component: 3700 - total flux cleaned = -0.00296519 Jy ! Component: 3750 - total flux cleaned = -0.00305407 Jy ! Component: 3800 - total flux cleaned = -0.00312018 Jy ! Component: 3850 - total flux cleaned = -0.00322963 Jy ! Component: 3900 - total flux cleaned = -0.00329514 Jy ! Component: 3950 - total flux cleaned = -0.00333863 Jy ! Component: 4000 - total flux cleaned = -0.00342486 Jy ! Component: 4050 - total flux cleaned = -0.00342502 Jy ! Total flux subtracted in 4096 components = -0.00351034 Jy ! Clean residual min=-0.001352 max=0.001172 Jy/beam ! Clean residual mean=-0.000002 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.596486 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 443 components and 0.596485 Jy ![Exited script file: muppet] wmap "J0914+0245_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.433 x 8.17 at 1.188 degrees (North through East) ! Clean map min=-0.0033478 max=0.52186 Jy/beam ! Writing clean map to FITS file: J0914+0245_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.521861 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000388534 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.223355 0.223355 0.44671 0.893419 1.78684 3.57368 7.14736 14.2947 28.5894 57.1788 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.521 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.433 x 8.17 at 1.188 degrees (North through East) ! Clean map min=-0.0033478 max=0.52186 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0914+0245_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:03:41 2019