! Started logfile: J0912-4137_S_2017_10_09_pus_uvs.log on Sun May 12 13:08:51 2019
obs J0912-4137_S_2017_10_09_pus_uva.fits
! Reading UV FITS file: J0912-4137_S_2017_10_09_pus_uva.fits
! AN table 1: 71 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.320814 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0912-4137
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 496 lines of history.
! 
! Reading 3280 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J0912-4137_S_2017_10_09_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 347 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 356 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 373 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 606 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.868703Jy  sigma=0.004709
! Fit after  self-cal, rms=0.837653Jy  sigma=0.004513
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.257 mas, bmaj=67.7 mas, bpa=-7.355 degrees
! Estimated noise=4319.15 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.110768 Jy
! Component: 100  -  total flux cleaned = 0.155575 Jy
! Total flux subtracted in 100 components = 0.155575 Jy
! Clean residual min=-0.014089 max=0.020579 Jy/beam
! Clean residual mean=0.000163 rms=0.006613 Jy/beam
! Combined flux in latest and established models = 0.155575 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.155575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.151269Jy  sigma=0.000741
! Fit after  self-cal, rms=0.150826Jy  sigma=0.000739
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=5.983 mas, bmaj=69.56 mas, bpa=-8.047 degrees
! Estimated noise=3183.82 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0425669 Jy
! Component: 100  -  total flux cleaned = 0.0631461 Jy
! Component: 150  -  total flux cleaned = 0.0678233 Jy
! Component: 200  -  total flux cleaned = 0.0682215 Jy
! Total flux subtracted in 200 components = 0.0682215 Jy
! Clean residual min=-0.005496 max=0.005561 Jy/beam
! Clean residual mean=0.000040 rms=0.002192 Jy/beam
! Combined flux in latest and established models = 0.223797 Jy
! Performing phase self-cal
! Adding 131 model components to the UV plane model.
! The established model now contains 162 components and 0.223797 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.139448Jy  sigma=0.000671
! Fit after  self-cal, rms=0.139510Jy  sigma=0.000670
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.91     HN        0.90     KP        1.03     
!   LA        1.01     MK        1.00*    NL        1.06     OV        1.00*    
!   PT        1.06     
! 
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.07     HN        1.11     KP        1.07     
!   LA        1.10     MK        1.00*    NL        0.99     OV        1.00*    
!   PT        1.00     
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        1.01     HN        1.07     KP        0.91     
!   LA        0.76     MK        1.00*    NL        1.06     OV        1.00*    
!   PT        0.96     
! 
! 
! Correcting IF 4.
!  A total of 33 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    
! 
! 
! Fit before self-cal, rms=0.139510Jy  sigma=0.000670
! Fit after  self-cal, rms=0.137920Jy  sigma=0.000656
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=6.15 mas, bmaj=69.24 mas, bpa=-8.176 degrees
! Estimated noise=3292.96 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000972311 Jy
! Component: 100  -  total flux cleaned = 0.00148462 Jy
! Component: 150  -  total flux cleaned = 0.00185631 Jy
! Component: 200  -  total flux cleaned = 0.00287127 Jy
! Total flux subtracted in 200 components = 0.00287127 Jy
! Clean residual min=-0.001549 max=0.001586 Jy/beam
! Clean residual mean=0.000014 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.226668 Jy
! Performing phase self-cal
! Adding 63 model components to the UV plane model.
! The established model now contains 225 components and 0.226668 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137585Jy  sigma=0.000654
! Fit after  self-cal, rms=0.137471Jy  sigma=0.000654
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137471Jy  sigma=0.000654
! Fit after  self-cal, rms=0.137236Jy  sigma=0.000654
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.13 mas, bmaj=69.22 mas, bpa=-8.158 degrees
! Estimated noise=3284.96 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000565971 Jy
! Component: 100  -  total flux cleaned = 0.000653729 Jy
! Component: 150  -  total flux cleaned = 0.000807059 Jy
! Component: 200  -  total flux cleaned = 0.000725149 Jy
! Total flux subtracted in 200 components = 0.000725149 Jy
! Clean residual min=-0.001161 max=0.001172 Jy/beam
! Clean residual mean=0.000011 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.227393 Jy
selfcal
! Performing phase self-cal
! Adding 73 model components to the UV plane model.
! The established model now contains 282 components and 0.227393 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137135Jy  sigma=0.000653
! Fit after  self-cal, rms=0.137098Jy  sigma=0.000653
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000597792 Jy
! Component: 100  -  total flux cleaned = -0.00082313 Jy
! Component: 150  -  total flux cleaned = -0.00117903 Jy
! Component: 200  -  total flux cleaned = -0.000972953 Jy
! Total flux subtracted in 200 components = -0.000972953 Jy
! Clean residual min=-0.001126 max=0.001126 Jy/beam
! Clean residual mean=0.000008 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.22642 Jy
! Performing phase self-cal
! Adding 51 model components to the UV plane model.
! The established model now contains 324 components and 0.22642 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137034Jy  sigma=0.000653
! Fit after  self-cal, rms=0.137026Jy  sigma=0.000653
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.137026Jy  sigma=0.000653
! Fit after  self-cal, rms=0.136314Jy  sigma=0.000653
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.089 mas, bmaj=69.13 mas, bpa=-8.123 degrees
! Estimated noise=3267.66 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000447603 Jy
! Component: 100  -  total flux cleaned = 0.000243321 Jy
! Component: 150  -  total flux cleaned = 5.28772e-05 Jy
! Component: 200  -  total flux cleaned = 0.000292985 Jy
! Total flux subtracted in 200 components = 0.000292985 Jy
! Clean residual min=-0.000967 max=0.000973 Jy/beam
! Clean residual mean=0.000007 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.226713 Jy
selfcal
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 361 components and 0.226713 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136260Jy  sigma=0.000652
! Fit after  self-cal, rms=0.136246Jy  sigma=0.000652
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000312907 Jy
! Component: 100  -  total flux cleaned = 0.000253074 Jy
! Component: 150  -  total flux cleaned = 0.000430685 Jy
! Component: 200  -  total flux cleaned = 0.000596467 Jy
! Total flux subtracted in 200 components = 0.000596467 Jy
! Clean residual min=-0.000887 max=0.000879 Jy/beam
! Clean residual mean=0.000010 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.22731 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 401 components and 0.22731 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136202Jy  sigma=0.000652
! Fit after  self-cal, rms=0.136187Jy  sigma=0.000652
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.136187Jy  sigma=0.000652
! Fit after  self-cal, rms=0.135350Jy  sigma=0.000652
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.383 mas, bmaj=76.09 mas, bpa=-10.3 degrees
! Estimated noise=3449.21 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000136834 Jy
! Component: 100  -  total flux cleaned = 6.49274e-05 Jy
! Component: 150  -  total flux cleaned = -3.75585e-06 Jy
! Component: 200  -  total flux cleaned = 2.95756e-05 Jy
! Total flux subtracted in 200 components = 2.95756e-05 Jy
! Clean residual min=-0.000557 max=0.000554 Jy/beam
! Clean residual mean=0.000006 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.227339 Jy
selfcal
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 451 components and 0.227339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135329Jy  sigma=0.000652
! Fit after  self-cal, rms=0.135327Jy  sigma=0.000652
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000145112 Jy
! Component: 100  -  total flux cleaned = 0.000242586 Jy
! Component: 150  -  total flux cleaned = 0.000337255 Jy
! Component: 200  -  total flux cleaned = 0.000244111 Jy
! Total flux subtracted in 200 components = 0.000244111 Jy
! Clean residual min=-0.000511 max=0.000505 Jy/beam
! Clean residual mean=0.000006 rms=0.000199 Jy/beam
! Combined flux in latest and established models = 0.227584 Jy
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 486 components and 0.227584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135308Jy  sigma=0.000652
! Fit after  self-cal, rms=0.135306Jy  sigma=0.000652
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=6.047 mas, bmaj=69.07 mas, bpa=-8.083 degrees
! Estimated noise=3246.63 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.047 x 69.07 at -8.083 degrees (North through East)
! Clean map  min=-0.0057311  max=0.14764 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.301 mas, bmaj=66.87 mas, bpa=-7.35 degrees
! Estimated noise=4247.53 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.110435 Jy
! Component: 100  -  total flux cleaned = 0.156934 Jy
! Component: 150  -  total flux cleaned = 0.182983 Jy
! Component: 200  -  total flux cleaned = 0.193971 Jy
! Total flux subtracted in 200 components = 0.193971 Jy
! Clean residual min=-0.010220 max=0.010161 Jy/beam
! Clean residual mean=0.000091 rms=0.004143 Jy/beam
! Combined flux in latest and established models = 0.193971 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 97 model components to the UV plane model.
! The established model now contains 97 components and 0.193971 Jy
! Inverting map and beam 
! Estimated beam: bmin=6.047 mas, bmaj=69.07 mas, bpa=-8.083 degrees
! Estimated noise=3246.63 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0189524 Jy
! Component: 100  -  total flux cleaned = 0.0229284 Jy
! Component: 150  -  total flux cleaned = 0.0229917 Jy
! Component: 200  -  total flux cleaned = 0.0222117 Jy
! Total flux subtracted in 200 components = 0.0222117 Jy
! Clean residual min=-0.004316 max=0.004306 Jy/beam
! Clean residual mean=0.000049 rms=0.001675 Jy/beam
! Combined flux in latest and established models = 0.216183 Jy
! Adding 95 model components to the UV plane model.
! The established model now contains 188 components and 0.216183 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.383 mas, bmaj=76.09 mas, bpa=-10.3 degrees
! Estimated noise=3449.21 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000427184 Jy
! Component: 100  -  total flux cleaned = 0.000491177 Jy
! Component: 150  -  total flux cleaned = 0.000596426 Jy
! Component: 200  -  total flux cleaned = 0.00076698 Jy
! Total flux subtracted in 200 components = 0.00076698 Jy
! Clean residual min=-0.001265 max=0.001268 Jy/beam
! Clean residual mean=0.000019 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.21695 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144259 Jy
! Component: 100  -  total flux cleaned = 7.80261e-05 Jy
! Component: 150  -  total flux cleaned = 1.56939e-05 Jy
! Component: 200  -  total flux cleaned = 1.2857e-05 Jy
! Total flux subtracted in 200 components = 1.2857e-05 Jy
! Clean residual min=-0.001067 max=0.001096 Jy/beam
! Clean residual mean=0.000007 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.216963 Jy
! Adding 171 model components to the UV plane model.
! The established model now contains 358 components and 0.216963 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=6.047 mas, bmaj=69.07 mas, bpa=-8.083 degrees
! Estimated noise=3246.63 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000206134 Jy
! Component: 100  -  total flux cleaned = 0.000494008 Jy
! Component: 150  -  total flux cleaned = 0.00139576 Jy
! Component: 200  -  total flux cleaned = 0.00133815 Jy
! Total flux subtracted in 200 components = 0.00133815 Jy
! Clean residual min=-0.001014 max=0.001025 Jy/beam
! Clean residual mean=0.000005 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.218301 Jy
selfcal
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 407 components and 0.218301 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.135391Jy  sigma=0.000652
! Fit after  self-cal, rms=0.135350Jy  sigma=0.000652
wmodel J0912-4137_S_2017_10_09_pus_map.mod
! Writing 407 model components to file: J0912-4137_S_2017_10_09_pus_map.mod
wobs J0912-4137_S_2017_10_09_pus_uvs.fits
! Writing UV FITS file: J0912-4137_S_2017_10_09_pus_uvs.fits
wwins J0912-4137_S_2017_10_09_pus_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: muppet]
! 
wmap "J0912-4137_S_2017_10_09_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.047 x 69.07 at -8.083 degrees (North through East)
! Clean map  min=-0.0067671  max=0.14122 Jy/beam
! Writing clean map to FITS file: J0912-4137_S_2017_10_09_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.141216 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00040773 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.866184 0.866184 1.73237 3.46473 6.92947 13.8589 27.7179 55.4358
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0012 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.141 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 6.047 x 69.07 at -8.083 degrees (North through East)
! Clean map  min=-0.0067671  max=0.14122 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J0912-4137_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:08:58 2019