! Started logfile: J0911+8607_S_2017_10_09_pus_uvs.log on Sun May 12 13:08:45 2019 obs J0911+8607_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0911+8607_S_2017_10_09_pus_uva.fits ! AN table 1: 217 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.726831 visibilities/baseline/integration-bin. ! Found source: J0911+8607 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 22712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0911+8607_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 292 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 512 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 277 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 951 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.976870Jy sigma=0.008558 ! Fit after self-cal, rms=0.948114Jy sigma=0.008312 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.785 mas, bmaj=4.267 mas, bpa=-51.66 degrees ! Estimated noise=1095.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0397451 Jy ! Component: 100 - total flux cleaned = 0.0498024 Jy ! Total flux subtracted in 100 components = 0.0498024 Jy ! Clean residual min=-0.004048 max=0.005043 Jy/beam ! Clean residual mean=0.000027 rms=0.001163 Jy/beam ! Combined flux in latest and established models = 0.0498024 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0498024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080458Jy sigma=0.000667 ! Fit after self-cal, rms=0.079971Jy sigma=0.000663 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.589 mas, bmaj=5.28 mas, bpa=-50.17 degrees ! Estimated noise=621.999 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00741879 Jy ! Component: 100 - total flux cleaned = 0.0109934 Jy ! Component: 150 - total flux cleaned = 0.0128564 Jy ! Component: 200 - total flux cleaned = 0.0138444 Jy ! Total flux subtracted in 200 components = 0.0138444 Jy ! Clean residual min=-0.003781 max=0.004813 Jy/beam ! Clean residual mean=0.000050 rms=0.001165 Jy/beam ! Combined flux in latest and established models = 0.0636467 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 24 components and 0.0636467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079248Jy sigma=0.000658 ! Fit after self-cal, rms=0.079165Jy sigma=0.000657 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.94 HN 1.06 KP 1.06 ! LA 0.95 MK 1.04 NL 1.14 OV 1.00* ! PT 1.00 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00 HN 1.00 KP 1.01 ! LA 0.90 MK 0.98 NL 0.63 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.13 HN 1.10 KP 0.90 ! LA 0.78 MK 1.00 NL 1.27 OV 1.00* ! PT 0.91 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.01 HN 0.92 KP 1.00* ! LA 0.77 MK 0.97 NL 1.00* OV 1.00* ! PT 0.95 ! ! ! Fit before self-cal, rms=0.079165Jy sigma=0.000657 ! Fit after self-cal, rms=0.077195Jy sigma=0.000654 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.618 mas, bmaj=5.318 mas, bpa=-49.96 degrees ! Estimated noise=617.938 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000298272 Jy ! Component: 100 - total flux cleaned = 0.00020619 Jy ! Component: 150 - total flux cleaned = 0.000181257 Jy ! Component: 200 - total flux cleaned = 0.000180782 Jy ! Total flux subtracted in 200 components = 0.000180782 Jy ! Clean residual min=-0.003192 max=0.004539 Jy/beam ! Clean residual mean=0.000061 rms=0.001040 Jy/beam ! Combined flux in latest and established models = 0.0638275 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 35 components and 0.0638275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077175Jy sigma=0.000654 ! Fit after self-cal, rms=0.077171Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077171Jy sigma=0.000653 ! Fit after self-cal, rms=0.079996Jy sigma=0.000649 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=5.358 mas, bpa=-49.63 degrees ! Estimated noise=618.743 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00013063 Jy ! Component: 100 - total flux cleaned = 0.000176425 Jy ! Component: 150 - total flux cleaned = 0.000196409 Jy ! Component: 200 - total flux cleaned = 0.000196112 Jy ! Total flux subtracted in 200 components = 0.000196112 Jy ! Clean residual min=-0.002510 max=0.004098 Jy/beam ! Clean residual mean=0.000017 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.0640236 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.0640236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079983Jy sigma=0.000649 ! Fit after self-cal, rms=0.080321Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-118.5, 76.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00373109 Jy ! Component: 100 - total flux cleaned = 0.00553548 Jy ! Component: 150 - total flux cleaned = 0.00630647 Jy ! Component: 200 - total flux cleaned = 0.00662404 Jy ! Total flux subtracted in 200 components = 0.00662404 Jy ! Clean residual min=-0.002149 max=0.003111 Jy/beam ! Clean residual mean=0.000002 rms=0.000682 Jy/beam ! Combined flux in latest and established models = 0.0706477 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 76 components and 0.0706477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080162Jy sigma=0.000646 ! Fit after self-cal, rms=0.080093Jy sigma=0.000646 ! Inverting map ! Added new window around map position (-24.5, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00313855 Jy ! Component: 100 - total flux cleaned = 0.00417709 Jy ! Component: 150 - total flux cleaned = 0.00470022 Jy ! Component: 200 - total flux cleaned = 0.00489459 Jy ! Total flux subtracted in 200 components = 0.00489459 Jy ! Clean residual min=-0.001980 max=0.002753 Jy/beam ! Clean residual mean=0.000001 rms=0.000618 Jy/beam ! Combined flux in latest and established models = 0.0755422 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 109 components and 0.0755423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079956Jy sigma=0.000644 ! Fit after self-cal, rms=0.079859Jy sigma=0.000644 ! Inverting map ! Added new window around map position (49.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276838 Jy ! Component: 100 - total flux cleaned = 0.00403994 Jy ! Component: 150 - total flux cleaned = 0.00448398 Jy ! Component: 200 - total flux cleaned = 0.00500911 Jy ! Total flux subtracted in 200 components = 0.00500911 Jy ! Clean residual min=-0.001986 max=0.002065 Jy/beam ! Clean residual mean=-0.000000 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0805514 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 122 components and 0.0805514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079750Jy sigma=0.000643 ! Fit after self-cal, rms=0.079683Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079683Jy sigma=0.000642 ! Fit after self-cal, rms=0.079984Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.595 mas, bmaj=5.33 mas, bpa=-50.71 degrees ! Estimated noise=609.696 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199381 Jy ! Component: 100 - total flux cleaned = 0.0030127 Jy ! Component: 150 - total flux cleaned = 0.00357286 Jy ! Component: 200 - total flux cleaned = 0.00385518 Jy ! Total flux subtracted in 200 components = 0.00385518 Jy ! Clean residual min=-0.001831 max=0.002064 Jy/beam ! Clean residual mean=0.000002 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.0844066 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 141 components and 0.0844066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079918Jy sigma=0.000641 ! Fit after self-cal, rms=0.079958Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00122047 Jy ! Component: 100 - total flux cleaned = 0.00160919 Jy ! Component: 150 - total flux cleaned = 0.00172217 Jy ! Component: 200 - total flux cleaned = 0.00175689 Jy ! Total flux subtracted in 200 components = 0.00175689 Jy ! Clean residual min=-0.001817 max=0.001910 Jy/beam ! Clean residual mean=0.000002 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0861635 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 151 components and 0.0861635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079921Jy sigma=0.000640 ! Fit after self-cal, rms=0.079896Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079896Jy sigma=0.000640 ! Fit after self-cal, rms=0.080161Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.51 mas, bmaj=10.52 mas, bpa=-66.66 degrees ! Estimated noise=782.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124499 Jy ! Component: 100 - total flux cleaned = 0.002 Jy ! Component: 150 - total flux cleaned = 0.00213891 Jy ! Component: 200 - total flux cleaned = 0.0022363 Jy ! Total flux subtracted in 200 components = 0.0022363 Jy ! Clean residual min=-0.002327 max=0.002331 Jy/beam ! Clean residual mean=0.000005 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.0883998 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 163 components and 0.0883998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080141Jy sigma=0.000640 ! Fit after self-cal, rms=0.080154Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000795737 Jy ! Component: 100 - total flux cleaned = 0.00102721 Jy ! Component: 150 - total flux cleaned = 0.00109305 Jy ! Component: 200 - total flux cleaned = 0.00117233 Jy ! Total flux subtracted in 200 components = 0.00117233 Jy ! Clean residual min=-0.002286 max=0.002319 Jy/beam ! Clean residual mean=0.000006 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.0895721 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 170 components and 0.0895721 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080143Jy sigma=0.000640 ! Fit after self-cal, rms=0.080131Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.586 mas, bmaj=5.314 mas, bpa=-51.45 degrees ! Estimated noise=607.551 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.586 x 5.314 at -51.45 degrees (North through East) ! Clean map min=-0.0022896 max=0.05273 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.792 mas, bmaj=4.301 mas, bpa=-52.09 degrees ! Estimated noise=1068.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0376683 Jy ! Component: 100 - total flux cleaned = 0.0488972 Jy ! Component: 150 - total flux cleaned = 0.0562471 Jy ! Component: 200 - total flux cleaned = 0.0616239 Jy ! Total flux subtracted in 200 components = 0.0616239 Jy ! Clean residual min=-0.004381 max=0.005052 Jy/beam ! Clean residual mean=0.000017 rms=0.001096 Jy/beam ! Combined flux in latest and established models = 0.0616239 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0616239 Jy ! Inverting map and beam ! Estimated beam: bmin=3.586 mas, bmaj=5.314 mas, bpa=-51.45 degrees ! Estimated noise=607.551 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0063288 Jy ! Component: 100 - total flux cleaned = 0.0108905 Jy ! Component: 150 - total flux cleaned = 0.0143574 Jy ! Component: 200 - total flux cleaned = 0.016504 Jy ! Total flux subtracted in 200 components = 0.016504 Jy ! Clean residual min=-0.002565 max=0.002916 Jy/beam ! Clean residual mean=0.000006 rms=0.000662 Jy/beam ! Combined flux in latest and established models = 0.0781279 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 57 components and 0.0781279 Jy ! Inverting map ! Added new window around map position (-8.5, -10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0023432 Jy ! Component: 100 - total flux cleaned = 0.00391216 Jy ! Component: 150 - total flux cleaned = 0.00512298 Jy ! Component: 200 - total flux cleaned = 0.0059988 Jy ! Total flux subtracted in 200 components = 0.0059988 Jy ! Clean residual min=-0.002082 max=0.002207 Jy/beam ! Clean residual mean=0.000004 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.0841267 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 82 components and 0.0841267 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.51 mas, bmaj=10.52 mas, bpa=-66.66 degrees ! Estimated noise=782.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183224 Jy ! Component: 100 - total flux cleaned = 0.00321813 Jy ! Component: 150 - total flux cleaned = 0.00380694 Jy ! Component: 200 - total flux cleaned = 0.00419717 Jy ! Total flux subtracted in 200 components = 0.00419717 Jy ! Clean residual min=-0.002321 max=0.002425 Jy/beam ! Clean residual mean=0.000009 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.0883239 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000311963 Jy ! Component: 100 - total flux cleaned = 0.000532892 Jy ! Component: 150 - total flux cleaned = 0.000706996 Jy ! Component: 200 - total flux cleaned = 0.000842413 Jy ! Total flux subtracted in 200 components = 0.000842413 Jy ! Clean residual min=-0.002262 max=0.002341 Jy/beam ! Clean residual mean=0.000011 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.0891663 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 119 components and 0.0891663 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.586 mas, bmaj=5.314 mas, bpa=-51.45 degrees ! Estimated noise=607.551 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00059915 Jy ! Component: 100 - total flux cleaned = -0.000503224 Jy ! Component: 150 - total flux cleaned = -0.000464101 Jy ! Component: 200 - total flux cleaned = -0.00038891 Jy ! Total flux subtracted in 200 components = -0.00038891 Jy ! Clean residual min=-0.001770 max=0.001817 Jy/beam ! Clean residual mean=0.000005 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.0887774 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 136 components and 0.0887774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080146Jy sigma=0.000640 ! Fit after self-cal, rms=0.080144Jy sigma=0.000639 wmodel J0911+8607_S_2017_10_09_pus_map.mod ! Writing 136 model components to file: J0911+8607_S_2017_10_09_pus_map.mod wobs J0911+8607_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0911+8607_S_2017_10_09_pus_uvs.fits wwins J0911+8607_S_2017_10_09_pus_map.win ! wwins: Wrote 5 windows to J0911+8607_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 6.70307e-06 Jy ! Component: 100 - total flux cleaned = 6.57014e-05 Jy ! Component: 150 - total flux cleaned = 9.34748e-05 Jy ! Component: 200 - total flux cleaned = 0.000256851 Jy ! Component: 250 - total flux cleaned = 0.000414877 Jy ! Component: 300 - total flux cleaned = 0.000542483 Jy ! Component: 350 - total flux cleaned = 0.000567344 Jy ! Component: 400 - total flux cleaned = 0.000664074 Jy ! Component: 450 - total flux cleaned = 0.000617373 Jy ! Component: 500 - total flux cleaned = 0.000663693 Jy ! Component: 550 - total flux cleaned = 0.000708931 Jy ! Component: 600 - total flux cleaned = 0.00075274 Jy ! Component: 650 - total flux cleaned = 0.000795589 Jy ! Component: 700 - total flux cleaned = 0.000838064 Jy ! Component: 750 - total flux cleaned = 0.000796682 Jy ! Component: 800 - total flux cleaned = 0.000696916 Jy ! Component: 850 - total flux cleaned = 0.000815512 Jy ! Component: 900 - total flux cleaned = 0.000737687 Jy ! Component: 950 - total flux cleaned = 0.000813221 Jy ! Component: 1000 - total flux cleaned = 0.000775349 Jy ! Component: 1050 - total flux cleaned = 0.000793715 Jy ! Component: 1100 - total flux cleaned = 0.00079323 Jy ! Component: 1150 - total flux cleaned = 0.000811016 Jy ! Component: 1200 - total flux cleaned = 0.000793322 Jy ! Component: 1250 - total flux cleaned = 0.000827609 Jy ! Component: 1300 - total flux cleaned = 0.000827349 Jy ! Component: 1350 - total flux cleaned = 0.00081098 Jy ! Component: 1400 - total flux cleaned = 0.00077777 Jy ! Component: 1450 - total flux cleaned = 0.000842399 Jy ! Component: 1500 - total flux cleaned = 0.000858107 Jy ! Component: 1550 - total flux cleaned = 0.00077911 Jy ! Component: 1600 - total flux cleaned = 0.000794606 Jy ! Component: 1650 - total flux cleaned = 0.000763971 Jy ! Component: 1700 - total flux cleaned = 0.000809461 Jy ! Component: 1750 - total flux cleaned = 0.000749311 Jy ! Component: 1800 - total flux cleaned = 0.000690432 Jy ! Component: 1850 - total flux cleaned = 0.000632468 Jy ! Component: 1900 - total flux cleaned = 0.000632425 Jy ! Component: 1950 - total flux cleaned = 0.000604204 Jy ! Component: 2000 - total flux cleaned = 0.000604047 Jy ! Component: 2050 - total flux cleaned = 0.000562471 Jy ! Component: 2100 - total flux cleaned = 0.000439941 Jy ! Component: 2150 - total flux cleaned = 0.000467228 Jy ! Component: 2200 - total flux cleaned = 0.000413772 Jy ! Component: 2250 - total flux cleaned = 0.000334782 Jy ! Component: 2300 - total flux cleaned = 0.00030875 Jy ! Component: 2350 - total flux cleaned = 0.000270034 Jy ! Component: 2400 - total flux cleaned = 0.000206494 Jy ! Component: 2450 - total flux cleaned = 0.000193957 Jy ! Component: 2500 - total flux cleaned = 0.000168885 Jy ! Component: 2550 - total flux cleaned = 0.000107115 Jy ! Component: 2600 - total flux cleaned = 8.28441e-05 Jy ! Component: 2650 - total flux cleaned = 7.05598e-05 Jy ! Component: 2700 - total flux cleaned = 3.43725e-05 Jy ! Component: 2750 - total flux cleaned = -2.52117e-05 Jy ! Component: 2800 - total flux cleaned = -8.41386e-05 Jy ! Component: 2850 - total flux cleaned = -0.000119392 Jy ! Component: 2900 - total flux cleaned = -0.000165656 Jy ! Component: 2950 - total flux cleaned = -0.000211587 Jy ! Component: 3000 - total flux cleaned = -0.000234417 Jy ! Component: 3050 - total flux cleaned = -0.000268203 Jy ! Component: 3100 - total flux cleaned = -0.000268298 Jy ! Component: 3150 - total flux cleaned = -0.000290771 Jy ! Component: 3200 - total flux cleaned = -0.000323747 Jy ! Component: 3250 - total flux cleaned = -0.000269126 Jy ! Component: 3300 - total flux cleaned = -0.000312567 Jy ! Component: 3350 - total flux cleaned = -0.000333994 Jy ! Component: 3400 - total flux cleaned = -0.000344735 Jy ! Component: 3450 - total flux cleaned = -0.000365883 Jy ! Component: 3500 - total flux cleaned = -0.000376247 Jy ! Component: 3550 - total flux cleaned = -0.000386696 Jy ! Component: 3600 - total flux cleaned = -0.00037639 Jy ! Component: 3650 - total flux cleaned = -0.000397 Jy ! Component: 3700 - total flux cleaned = -0.000396998 Jy ! Component: 3750 - total flux cleaned = -0.000386868 Jy ! Component: 3800 - total flux cleaned = -0.000396894 Jy ! Component: 3850 - total flux cleaned = -0.000386908 Jy ! Component: 3900 - total flux cleaned = -0.000416751 Jy ! Component: 3950 - total flux cleaned = -0.000426718 Jy ! Component: 4000 - total flux cleaned = -0.00044641 Jy ! Component: 4050 - total flux cleaned = -0.000456216 Jy ! Total flux subtracted in 4096 components = -0.000436857 Jy ! Clean residual min=-0.000573 max=0.000554 Jy/beam ! Clean residual mean=-0.000000 rms=0.000178 Jy/beam ! Combined flux in latest and established models = 0.0883405 Jy keep ! Adding 315 model components to the UV plane model. ! The established model now contains 451 components and 0.0883406 Jy ![Exited script file: muppet] wmap "J0911+8607_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.586 x 5.314 at -51.45 degrees (North through East) ! Clean map min=-0.0015098 max=0.052042 Jy/beam ! Writing clean map to FITS file: J0911+8607_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0520419 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000176578 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.0179 1.0179 2.0358 4.07159 8.14319 16.2864 32.5727 65.1455 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.052 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.586 x 5.314 at -51.45 degrees (North through East) ! Clean map min=-0.0015098 max=0.052042 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0911+8607_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:08:51 2019