! Started logfile: J0910+2248_S_2017_09_26_pus_uvs.log on Sat May 11 12:59:16 2019 obs J0910+2248_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0910+2248_S_2017_09_26_pus_uva.fits ! AN table 1: 174 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.761335 visibilities/baseline/integration-bin. ! Found source: J0910+2248 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 19076 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0910+2248_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 190 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 262 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 248 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 856 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.906753Jy sigma=0.008205 ! Fit after self-cal, rms=0.887057Jy sigma=0.008046 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.291 mas, bmaj=7.926 mas, bpa=-24.62 degrees ! Estimated noise=1205.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0859612 Jy ! Component: 100 - total flux cleaned = 0.108108 Jy ! Total flux subtracted in 100 components = 0.108108 Jy ! Clean residual min=-0.006463 max=0.008973 Jy/beam ! Clean residual mean=-0.000004 rms=0.001833 Jy/beam ! Combined flux in latest and established models = 0.108108 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.108108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082335Jy sigma=0.000700 ! Fit after self-cal, rms=0.082324Jy sigma=0.000700 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.041 mas, bmaj=8.672 mas, bpa=-22.17 degrees ! Estimated noise=654.684 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0118224 Jy ! Component: 100 - total flux cleaned = 0.0166967 Jy ! Component: 150 - total flux cleaned = 0.0171614 Jy ! Component: 200 - total flux cleaned = 0.0173217 Jy ! Total flux subtracted in 200 components = 0.0173217 Jy ! Clean residual min=-0.004130 max=0.005455 Jy/beam ! Clean residual mean=-0.000001 rms=0.001136 Jy/beam ! Combined flux in latest and established models = 0.12543 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 32 components and 0.12543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080715Jy sigma=0.000687 ! Fit after self-cal, rms=0.080697Jy sigma=0.000687 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.95 KP 1.01 ! LA 0.99 MK 1.02 NL 0.89 OV 1.15 ! PT 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.00* HN 1.01 KP 0.99 ! LA 0.93 MK 1.06 NL 1.01 OV 1.11 ! PT 0.95 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.00* HN 0.97 KP 0.97 ! LA 0.96 MK 1.05 NL 0.96 OV 1.03 ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.96 KP 1.00* ! LA 0.93 MK 1.04 NL 1.00* OV 1.52 ! PT 0.96 ! ! ! Fit before self-cal, rms=0.080697Jy sigma=0.000687 ! Fit after self-cal, rms=0.080772Jy sigma=0.000678 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.07 mas, bmaj=8.727 mas, bpa=-22.07 degrees ! Estimated noise=651.094 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000304112 Jy ! Component: 100 - total flux cleaned = -0.000407087 Jy ! Component: 150 - total flux cleaned = -0.000478035 Jy ! Component: 200 - total flux cleaned = -0.000521196 Jy ! Total flux subtracted in 200 components = -0.000521196 Jy ! Clean residual min=-0.003455 max=0.003713 Jy/beam ! Clean residual mean=0.000006 rms=0.000922 Jy/beam ! Combined flux in latest and established models = 0.124909 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 43 components and 0.124909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080756Jy sigma=0.000678 ! Fit after self-cal, rms=0.080824Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080824Jy sigma=0.000678 ! Fit after self-cal, rms=0.082279Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.059 mas, bmaj=8.724 mas, bpa=-21.94 degrees ! Estimated noise=649.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000680324 Jy ! Component: 100 - total flux cleaned = 0.000801273 Jy ! Component: 150 - total flux cleaned = 0.000919186 Jy ! Component: 200 - total flux cleaned = 0.00100944 Jy ! Total flux subtracted in 200 components = 0.00100944 Jy ! Clean residual min=-0.001839 max=0.001633 Jy/beam ! Clean residual mean=0.000006 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.125918 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 51 components and 0.125918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082272Jy sigma=0.000668 ! Fit after self-cal, rms=0.082352Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.65359e-08 Jy ! Component: 100 - total flux cleaned = 2.36141e-05 Jy ! Component: 150 - total flux cleaned = 4.55085e-05 Jy ! Component: 200 - total flux cleaned = 6.57241e-05 Jy ! Total flux subtracted in 200 components = 6.57241e-05 Jy ! Clean residual min=-0.001821 max=0.001675 Jy/beam ! Clean residual mean=0.000006 rms=0.000406 Jy/beam ! Combined flux in latest and established models = 0.125984 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 54 components and 0.125984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082349Jy sigma=0.000667 ! Fit after self-cal, rms=0.082349Jy sigma=0.000667 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082349Jy sigma=0.000667 ! Fit after self-cal, rms=0.082603Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.055 mas, bmaj=8.718 mas, bpa=-21.9 degrees ! Estimated noise=650.352 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000394057 Jy ! Component: 100 - total flux cleaned = 0.000481839 Jy ! Component: 150 - total flux cleaned = 0.000530829 Jy ! Component: 200 - total flux cleaned = 0.000557846 Jy ! Total flux subtracted in 200 components = 0.000557846 Jy ! Clean residual min=-0.001852 max=0.001620 Jy/beam ! Clean residual mean=0.000006 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.126542 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 58 components and 0.126542 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082600Jy sigma=0.000667 ! Fit after self-cal, rms=0.082605Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.80638e-07 Jy ! Component: 100 - total flux cleaned = 1.63866e-05 Jy ! Component: 150 - total flux cleaned = 2.44033e-05 Jy ! Component: 200 - total flux cleaned = 3.20124e-05 Jy ! Total flux subtracted in 200 components = 3.20124e-05 Jy ! Clean residual min=-0.001844 max=0.001627 Jy/beam ! Clean residual mean=0.000006 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.126574 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 63 components and 0.126574 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082604Jy sigma=0.000667 ! Fit after self-cal, rms=0.082604Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082604Jy sigma=0.000667 ! Fit after self-cal, rms=0.082688Jy sigma=0.000667 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.633 mas, bmaj=10.95 mas, bpa=-13.93 degrees ! Estimated noise=756.301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000579924 Jy ! Component: 100 - total flux cleaned = 0.000868396 Jy ! Component: 150 - total flux cleaned = 0.000906178 Jy ! Component: 200 - total flux cleaned = 0.000926165 Jy ! Total flux subtracted in 200 components = 0.000926165 Jy ! Clean residual min=-0.001762 max=0.001941 Jy/beam ! Clean residual mean=0.000011 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.1275 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 68 components and 0.1275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082689Jy sigma=0.000667 ! Fit after self-cal, rms=0.082691Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (84, 53.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00077534 Jy ! Component: 100 - total flux cleaned = 0.000944676 Jy ! Component: 150 - total flux cleaned = 0.00115077 Jy ! Component: 200 - total flux cleaned = 0.0014232 Jy ! Total flux subtracted in 200 components = 0.0014232 Jy ! Clean residual min=-0.001395 max=0.001315 Jy/beam ! Clean residual mean=0.000008 rms=0.000349 Jy/beam ! Combined flux in latest and established models = 0.128923 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 100 components and 0.128923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082651Jy sigma=0.000667 ! Fit after self-cal, rms=0.082649Jy sigma=0.000667 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.053 mas, bmaj=8.714 mas, bpa=-21.87 degrees ! Estimated noise=650.923 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.053 x 8.714 at -21.87 degrees (North through East) ! Clean map min=-0.001756 max=0.11451 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.28 mas, bmaj=7.878 mas, bpa=-24.28 degrees ! Estimated noise=1222.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0867388 Jy ! Component: 100 - total flux cleaned = 0.109378 Jy ! Component: 150 - total flux cleaned = 0.119048 Jy ! Component: 200 - total flux cleaned = 0.12394 Jy ! Total flux subtracted in 200 components = 0.12394 Jy ! Clean residual min=-0.002846 max=0.002902 Jy/beam ! Clean residual mean=0.000001 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.12394 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.12394 Jy ! Inverting map and beam ! Estimated beam: bmin=4.053 mas, bmaj=8.714 mas, bpa=-21.87 degrees ! Estimated noise=650.923 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178222 Jy ! Component: 100 - total flux cleaned = 0.00274275 Jy ! Component: 150 - total flux cleaned = 0.00335775 Jy ! Component: 200 - total flux cleaned = 0.00378719 Jy ! Total flux subtracted in 200 components = 0.00378719 Jy ! Clean residual min=-0.001617 max=0.001448 Jy/beam ! Clean residual mean=0.000004 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.127727 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 45 components and 0.127727 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.633 mas, bmaj=10.95 mas, bpa=-13.93 degrees ! Estimated noise=756.301 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000886328 Jy ! Component: 100 - total flux cleaned = 0.00123879 Jy ! Component: 150 - total flux cleaned = 0.001428 Jy ! Component: 200 - total flux cleaned = 0.0016447 Jy ! Total flux subtracted in 200 components = 0.0016447 Jy ! Clean residual min=-0.001313 max=0.001345 Jy/beam ! Clean residual mean=0.000008 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.129372 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000171485 Jy ! Component: 100 - total flux cleaned = 0.000346657 Jy ! Component: 150 - total flux cleaned = 0.000489795 Jy ! Component: 200 - total flux cleaned = 0.000589736 Jy ! Total flux subtracted in 200 components = 0.000589736 Jy ! Clean residual min=-0.001187 max=0.001346 Jy/beam ! Clean residual mean=0.000008 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.129962 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 94 components and 0.129961 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.053 mas, bmaj=8.714 mas, bpa=-21.87 degrees ! Estimated noise=650.923 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.56167e-05 Jy ! Component: 100 - total flux cleaned = 4.202e-05 Jy ! Component: 150 - total flux cleaned = 1.7201e-05 Jy ! Component: 200 - total flux cleaned = 1.65733e-05 Jy ! Total flux subtracted in 200 components = 1.65733e-05 Jy ! Clean residual min=-0.001293 max=0.001429 Jy/beam ! Clean residual mean=0.000004 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.129978 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 111 components and 0.129978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082624Jy sigma=0.000667 ! Fit after self-cal, rms=0.082617Jy sigma=0.000667 wmodel J0910+2248_S_2017_09_26_pus_map.mod ! Writing 111 model components to file: J0910+2248_S_2017_09_26_pus_map.mod wobs J0910+2248_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0910+2248_S_2017_09_26_pus_uvs.fits wwins J0910+2248_S_2017_09_26_pus_map.win ! wwins: Wrote 2 windows to J0910+2248_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 8.65998e-05 Jy ! Component: 100 - total flux cleaned = 0.000180025 Jy ! Component: 150 - total flux cleaned = 0.00020265 Jy ! Component: 200 - total flux cleaned = 0.000120849 Jy ! Component: 250 - total flux cleaned = -1.59052e-05 Jy ! Component: 300 - total flux cleaned = -0.000109595 Jy ! Component: 350 - total flux cleaned = -0.000200067 Jy ! Component: 400 - total flux cleaned = -0.000235159 Jy ! Component: 450 - total flux cleaned = -0.00033669 Jy ! Component: 500 - total flux cleaned = -0.000451084 Jy ! Component: 550 - total flux cleaned = -0.000514275 Jy ! Component: 600 - total flux cleaned = -0.000560804 Jy ! Component: 650 - total flux cleaned = -0.000591121 Jy ! Component: 700 - total flux cleaned = -0.000620405 Jy ! Component: 750 - total flux cleaned = -0.00054927 Jy ! Component: 800 - total flux cleaned = -0.000549616 Jy ! Component: 850 - total flux cleaned = -0.00050875 Jy ! Component: 900 - total flux cleaned = -0.000482172 Jy ! Component: 950 - total flux cleaned = -0.000469194 Jy ! Component: 1000 - total flux cleaned = -0.00046925 Jy ! Component: 1050 - total flux cleaned = -0.000431787 Jy ! Component: 1100 - total flux cleaned = -0.000432051 Jy ! Component: 1150 - total flux cleaned = -0.000432272 Jy ! Component: 1200 - total flux cleaned = -0.000456046 Jy ! Component: 1250 - total flux cleaned = -0.000479225 Jy ! Component: 1300 - total flux cleaned = -0.000479112 Jy ! Component: 1350 - total flux cleaned = -0.000490527 Jy ! Component: 1400 - total flux cleaned = -0.000467966 Jy ! Component: 1450 - total flux cleaned = -0.000478968 Jy ! Component: 1500 - total flux cleaned = -0.000478986 Jy ! Component: 1550 - total flux cleaned = -0.000521906 Jy ! Component: 1600 - total flux cleaned = -0.000511253 Jy ! Component: 1650 - total flux cleaned = -0.0005217 Jy ! Component: 1700 - total flux cleaned = -0.000511459 Jy ! Component: 1750 - total flux cleaned = -0.000511529 Jy ! Component: 1800 - total flux cleaned = -0.000521583 Jy ! Component: 1850 - total flux cleaned = -0.000511696 Jy ! Component: 1900 - total flux cleaned = -0.000511728 Jy ! Component: 1950 - total flux cleaned = -0.000521434 Jy ! Component: 2000 - total flux cleaned = -0.000511798 Jy ! Component: 2050 - total flux cleaned = -0.000511801 Jy ! Component: 2100 - total flux cleaned = -0.000511978 Jy ! Component: 2150 - total flux cleaned = -0.000530696 Jy ! Component: 2200 - total flux cleaned = -0.000539919 Jy ! Component: 2250 - total flux cleaned = -0.000530714 Jy ! Component: 2300 - total flux cleaned = -0.000485448 Jy ! Component: 2350 - total flux cleaned = -0.000431647 Jy ! Component: 2400 - total flux cleaned = -0.000458373 Jy ! Component: 2450 - total flux cleaned = -0.000431763 Jy ! Component: 2500 - total flux cleaned = -0.000414179 Jy ! Component: 2550 - total flux cleaned = -0.000414119 Jy ! Component: 2600 - total flux cleaned = -0.000388121 Jy ! Component: 2650 - total flux cleaned = -0.000353779 Jy ! Component: 2700 - total flux cleaned = -0.000345269 Jy ! Component: 2750 - total flux cleaned = -0.000336746 Jy ! Component: 2800 - total flux cleaned = -0.000336685 Jy ! Component: 2850 - total flux cleaned = -0.000269887 Jy ! Component: 2900 - total flux cleaned = -0.000278233 Jy ! Component: 2950 - total flux cleaned = -0.000261789 Jy ! Component: 3000 - total flux cleaned = -0.000229006 Jy ! Component: 3050 - total flux cleaned = -0.000212742 Jy ! Component: 3100 - total flux cleaned = -0.000196653 Jy ! Component: 3150 - total flux cleaned = -0.000188523 Jy ! Component: 3200 - total flux cleaned = -0.000148603 Jy ! Component: 3250 - total flux cleaned = -0.000132788 Jy ! Component: 3300 - total flux cleaned = -0.000148615 Jy ! Component: 3350 - total flux cleaned = -0.000132961 Jy ! Component: 3400 - total flux cleaned = -0.000140814 Jy ! Component: 3450 - total flux cleaned = -0.000148621 Jy ! Component: 3500 - total flux cleaned = -0.000125515 Jy ! Component: 3550 - total flux cleaned = -9.48558e-05 Jy ! Component: 3600 - total flux cleaned = -0.000110201 Jy ! Component: 3650 - total flux cleaned = -0.00013298 Jy ! Component: 3700 - total flux cleaned = -0.000102742 Jy ! Component: 3750 - total flux cleaned = -0.000110275 Jy ! Component: 3800 - total flux cleaned = -0.000117758 Jy ! Component: 3850 - total flux cleaned = -0.00013267 Jy ! Component: 3900 - total flux cleaned = -0.000132671 Jy ! Component: 3950 - total flux cleaned = -0.000117833 Jy ! Component: 4000 - total flux cleaned = -0.000125158 Jy ! Component: 4050 - total flux cleaned = -0.000139833 Jy ! Total flux subtracted in 4096 components = -0.000132466 Jy ! Clean residual min=-0.000458 max=0.000505 Jy/beam ! Clean residual mean=0.000001 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.129846 Jy keep ! Adding 244 model components to the UV plane model. ! The established model now contains 355 components and 0.129846 Jy ![Exited script file: muppet] wmap "J0910+2248_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.053 x 8.714 at -21.87 degrees (North through East) ! Clean map min=-0.0018555 max=0.11413 Jy/beam ! Writing clean map to FITS file: J0910+2248_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.11413 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000125851 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.33081 0.33081 0.66162 1.32324 2.64648 5.29296 10.5859 21.1719 42.3437 84.6874 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.114 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.053 x 8.714 at -21.87 degrees (North through East) ! Clean map min=-0.0018555 max=0.11413 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0910+2248_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:59:21 2019