! Started logfile: J0905-3927_S_2017_06_10_pus_uvs.log on Mon May 6 14:49:26 2019 obs J0905-3927_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0905-3927_S_2017_06_10_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.583179 visibilities/baseline/integration-bin. ! Found source: J0905-3927 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 15116 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0905-3927_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 526 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 469 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 325 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 964 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006730Jy sigma=0.006015 ! Fit after self-cal, rms=0.940243Jy sigma=0.005630 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.364 mas, bmaj=6.597 mas, bpa=-6.181 degrees ! Estimated noise=2216.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0516672 Jy ! Component: 100 - total flux cleaned = 0.0633705 Jy ! Total flux subtracted in 100 components = 0.0633705 Jy ! Clean residual min=-0.005831 max=0.005952 Jy/beam ! Clean residual mean=0.000050 rms=0.001500 Jy/beam ! Combined flux in latest and established models = 0.0633705 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0633705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108780Jy sigma=0.000607 ! Fit after self-cal, rms=0.107431Jy sigma=0.000599 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.987 mas, bmaj=8.046 mas, bpa=-7.564 degrees ! Estimated noise=1219.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00270517 Jy ! Component: 100 - total flux cleaned = 0.00270483 Jy ! Component: 150 - total flux cleaned = 0.0026303 Jy ! Component: 200 - total flux cleaned = 0.00263594 Jy ! Total flux subtracted in 200 components = 0.00263594 Jy ! Clean residual min=-0.004198 max=0.004144 Jy/beam ! Clean residual mean=0.000053 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.0660064 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 0.0660064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107189Jy sigma=0.000598 ! Fit after self-cal, rms=0.107042Jy sigma=0.000597 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.96 ! LA 1.02 MK 0.98 NL 1.00* OV 1.15 ! PT 1.10 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.94 HN 1.00* KP 1.03 ! LA 0.97 MK 0.94 NL 1.00* OV 1.02 ! PT 1.13 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.04 ! LA 1.04 MK 0.96 NL 0.85 OV 0.95 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 4. ! A total of 264 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 1.00* ! LA 0.89 MK 0.74 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.107042Jy sigma=0.000597 ! Fit after self-cal, rms=0.104148Jy sigma=0.000599 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.946 mas, bmaj=7.89 mas, bpa=-8.06 degrees ! Estimated noise=1233.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00016863 Jy ! Component: 100 - total flux cleaned = 0.000151257 Jy ! Component: 150 - total flux cleaned = 0.000135903 Jy ! Component: 200 - total flux cleaned = 0.000135146 Jy ! Total flux subtracted in 200 components = 0.000135146 Jy ! Clean residual min=-0.003020 max=0.003273 Jy/beam ! Clean residual mean=0.000036 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.0661415 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 20 components and 0.0661415 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104142Jy sigma=0.000599 ! Fit after self-cal, rms=0.104016Jy sigma=0.000599 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104016Jy sigma=0.000599 ! Fit after self-cal, rms=0.103986Jy sigma=0.000598 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.932 mas, bmaj=7.873 mas, bpa=-8.146 degrees ! Estimated noise=1236.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.31947e-05 Jy ! Component: 100 - total flux cleaned = 0.000123018 Jy ! Component: 150 - total flux cleaned = 0.000179068 Jy ! Component: 200 - total flux cleaned = 0.000215026 Jy ! Total flux subtracted in 200 components = 0.000215026 Jy ! Clean residual min=-0.002697 max=0.003475 Jy/beam ! Clean residual mean=0.000024 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.0663566 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 24 components and 0.0663566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103981Jy sigma=0.000598 ! Fit after self-cal, rms=0.103951Jy sigma=0.000598 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (64, -55). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00302232 Jy ! Component: 100 - total flux cleaned = 0.00431243 Jy ! Component: 150 - total flux cleaned = 0.00493545 Jy ! Component: 200 - total flux cleaned = 0.00513669 Jy ! Total flux subtracted in 200 components = 0.00513669 Jy ! Clean residual min=-0.002421 max=0.002872 Jy/beam ! Clean residual mean=0.000028 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.0714933 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 47 components and 0.0714933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103869Jy sigma=0.000598 ! Fit after self-cal, rms=0.103834Jy sigma=0.000597 ! Inverting map ! Added new window around map position (-83.5, -58.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254593 Jy ! Component: 100 - total flux cleaned = 0.00309112 Jy ! Component: 150 - total flux cleaned = 0.00340806 Jy ! Component: 200 - total flux cleaned = 0.0037643 Jy ! Total flux subtracted in 200 components = 0.0037643 Jy ! Clean residual min=-0.002435 max=0.002371 Jy/beam ! Clean residual mean=0.000021 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.0752576 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 61 components and 0.0752576 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103739Jy sigma=0.000597 ! Fit after self-cal, rms=0.103711Jy sigma=0.000597 ! Inverting map ! Added new window around map position (-6.5, -122). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00253777 Jy ! Component: 100 - total flux cleaned = 0.00327969 Jy ! Component: 150 - total flux cleaned = 0.00375874 Jy ! Component: 200 - total flux cleaned = 0.00417298 Jy ! Total flux subtracted in 200 components = 0.00417298 Jy ! Clean residual min=-0.002524 max=0.002449 Jy/beam ! Clean residual mean=0.000022 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.0794306 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 73 components and 0.0794306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103634Jy sigma=0.000596 ! Fit after self-cal, rms=0.103559Jy sigma=0.000596 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103559Jy sigma=0.000596 ! Fit after self-cal, rms=0.102773Jy sigma=0.000596 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.938 mas, bmaj=7.877 mas, bpa=-7.876 degrees ! Estimated noise=1223.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192355 Jy ! Component: 100 - total flux cleaned = 0.00243817 Jy ! Component: 150 - total flux cleaned = 0.0028602 Jy ! Component: 200 - total flux cleaned = 0.00318462 Jy ! Total flux subtracted in 200 components = 0.00318462 Jy ! Clean residual min=-0.002167 max=0.002134 Jy/beam ! Clean residual mean=0.000014 rms=0.000527 Jy/beam ! Combined flux in latest and established models = 0.0826152 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 78 components and 0.0826152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102723Jy sigma=0.000595 ! Fit after self-cal, rms=0.102754Jy sigma=0.000595 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00126653 Jy ! Component: 100 - total flux cleaned = 0.00160364 Jy ! Component: 150 - total flux cleaned = 0.00191878 Jy ! Component: 200 - total flux cleaned = 0.00210838 Jy ! Total flux subtracted in 200 components = 0.00210838 Jy ! Clean residual min=-0.002223 max=0.002191 Jy/beam ! Clean residual mean=0.000015 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.0847235 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 89 components and 0.0847236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102720Jy sigma=0.000595 ! Fit after self-cal, rms=0.102706Jy sigma=0.000595 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102706Jy sigma=0.000595 ! Fit after self-cal, rms=0.102876Jy sigma=0.000595 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.652 mas, bmaj=28.57 mas, bpa=-2.85 degrees ! Estimated noise=1608.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109257 Jy ! Component: 100 - total flux cleaned = 0.00173725 Jy ! Component: 150 - total flux cleaned = 0.00204239 Jy ! Component: 200 - total flux cleaned = 0.00215829 Jy ! Total flux subtracted in 200 components = 0.00215829 Jy ! Clean residual min=-0.001762 max=0.001983 Jy/beam ! Clean residual mean=0.000024 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.0868818 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 102 components and 0.0868819 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102869Jy sigma=0.000595 ! Fit after self-cal, rms=0.102889Jy sigma=0.000595 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000779356 Jy ! Component: 100 - total flux cleaned = 0.00126572 Jy ! Component: 150 - total flux cleaned = 0.00153633 Jy ! Component: 200 - total flux cleaned = 0.00161526 Jy ! Total flux subtracted in 200 components = 0.00161526 Jy ! Clean residual min=-0.001891 max=0.002142 Jy/beam ! Clean residual mean=0.000024 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.0884971 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 107 components and 0.0884971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102886Jy sigma=0.000595 ! Fit after self-cal, rms=0.102882Jy sigma=0.000595 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.942 mas, bmaj=7.874 mas, bpa=-7.65 degrees ! Estimated noise=1222.45 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.942 x 7.874 at -7.65 degrees (North through East) ! Clean map min=-0.0022861 max=0.066758 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.326 mas, bmaj=6.543 mas, bpa=-6.985 degrees ! Estimated noise=2168.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0513503 Jy ! Component: 100 - total flux cleaned = 0.0639221 Jy ! Component: 150 - total flux cleaned = 0.0715632 Jy ! Component: 200 - total flux cleaned = 0.0755793 Jy ! Total flux subtracted in 200 components = 0.0755793 Jy ! Clean residual min=-0.004849 max=0.004641 Jy/beam ! Clean residual mean=-0.000002 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.0755793 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.0755793 Jy ! Inverting map and beam ! Estimated beam: bmin=2.942 mas, bmaj=7.874 mas, bpa=-7.65 degrees ! Estimated noise=1222.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00503744 Jy ! Component: 100 - total flux cleaned = 0.00771583 Jy ! Component: 150 - total flux cleaned = 0.00889502 Jy ! Component: 200 - total flux cleaned = 0.00961534 Jy ! Total flux subtracted in 200 components = 0.00961534 Jy ! Clean residual min=-0.002528 max=0.002519 Jy/beam ! Clean residual mean=0.000008 rms=0.000649 Jy/beam ! Combined flux in latest and established models = 0.0851946 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 41 components and 0.0851946 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.652 mas, bmaj=28.57 mas, bpa=-2.85 degrees ! Estimated noise=1608.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00183746 Jy ! Component: 100 - total flux cleaned = 0.00283951 Jy ! Component: 150 - total flux cleaned = 0.00326701 Jy ! Component: 200 - total flux cleaned = 0.00341465 Jy ! Total flux subtracted in 200 components = 0.00341465 Jy ! Clean residual min=-0.001968 max=0.002271 Jy/beam ! Clean residual mean=0.000024 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.0886092 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111104 Jy ! Component: 100 - total flux cleaned = 0.00019642 Jy ! Component: 150 - total flux cleaned = 0.000245201 Jy ! Component: 200 - total flux cleaned = 0.000288587 Jy ! Total flux subtracted in 200 components = 0.000288587 Jy ! Clean residual min=-0.001916 max=0.002194 Jy/beam ! Clean residual mean=0.000025 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.0888978 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 73 components and 0.0888978 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.942 mas, bmaj=7.874 mas, bpa=-7.65 degrees ! Estimated noise=1222.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000268773 Jy ! Component: 100 - total flux cleaned = -0.000328616 Jy ! Component: 150 - total flux cleaned = -0.000175887 Jy ! Component: 200 - total flux cleaned = 5.22299e-05 Jy ! Total flux subtracted in 200 components = 5.22299e-05 Jy ! Clean residual min=-0.002275 max=0.002397 Jy/beam ! Clean residual mean=0.000018 rms=0.000575 Jy/beam ! Combined flux in latest and established models = 0.0889501 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 0.0889501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102904Jy sigma=0.000595 ! Fit after self-cal, rms=0.102911Jy sigma=0.000595 wmodel J0905-3927_S_2017_06_10_pus_map.mod ! Writing 85 model components to file: J0905-3927_S_2017_06_10_pus_map.mod wobs J0905-3927_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0905-3927_S_2017_06_10_pus_uvs.fits wwins J0905-3927_S_2017_06_10_pus_map.win ! wwins: Wrote 4 windows to J0905-3927_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000447576 Jy ! Component: 100 - total flux cleaned = 6.66001e-05 Jy ! Component: 150 - total flux cleaned = -0.000112901 Jy ! Component: 200 - total flux cleaned = -0.000284012 Jy ! Component: 250 - total flux cleaned = -0.000316924 Jy ! Component: 300 - total flux cleaned = -0.000411169 Jy ! Component: 350 - total flux cleaned = -0.000380695 Jy ! Component: 400 - total flux cleaned = -0.000526669 Jy ! Component: 450 - total flux cleaned = -0.000611683 Jy ! Component: 500 - total flux cleaned = -0.00063887 Jy ! Component: 550 - total flux cleaned = -0.000718719 Jy ! Component: 600 - total flux cleaned = -0.000717756 Jy ! Component: 650 - total flux cleaned = -0.000794106 Jy ! Component: 700 - total flux cleaned = -0.000843393 Jy ! Component: 750 - total flux cleaned = -0.000795698 Jy ! Component: 800 - total flux cleaned = -0.000819339 Jy ! Component: 850 - total flux cleaned = -0.000726655 Jy ! Component: 900 - total flux cleaned = -0.000704418 Jy ! Component: 950 - total flux cleaned = -0.000704075 Jy ! Component: 1000 - total flux cleaned = -0.000703917 Jy ! Component: 1050 - total flux cleaned = -0.000682542 Jy ! Component: 1100 - total flux cleaned = -0.000599521 Jy ! Component: 1150 - total flux cleaned = -0.000579163 Jy ! Component: 1200 - total flux cleaned = -0.000519121 Jy ! Component: 1250 - total flux cleaned = -0.000421565 Jy ! Component: 1300 - total flux cleaned = -0.000441438 Jy ! Component: 1350 - total flux cleaned = -0.000384782 Jy ! Component: 1400 - total flux cleaned = -0.00031047 Jy ! Component: 1450 - total flux cleaned = -0.000328781 Jy ! Component: 1500 - total flux cleaned = -0.000292485 Jy ! Component: 1550 - total flux cleaned = -0.000221368 Jy ! Component: 1600 - total flux cleaned = -0.000151365 Jy ! Component: 1650 - total flux cleaned = -9.92864e-05 Jy ! Component: 1700 - total flux cleaned = -3.07901e-05 Jy ! Component: 1750 - total flux cleaned = 2.82302e-06 Jy ! Component: 1800 - total flux cleaned = 5.29849e-05 Jy ! Component: 1850 - total flux cleaned = 0.000135894 Jy ! Component: 1900 - total flux cleaned = 0.000234137 Jy ! Component: 1950 - total flux cleaned = 0.00026653 Jy ! Component: 2000 - total flux cleaned = 0.00036263 Jy ! Component: 2050 - total flux cleaned = 0.0003943 Jy ! Component: 2100 - total flux cleaned = 0.000441665 Jy ! Component: 2150 - total flux cleaned = 0.000534948 Jy ! Component: 2200 - total flux cleaned = 0.000611769 Jy ! Component: 2250 - total flux cleaned = 0.000718335 Jy ! Component: 2300 - total flux cleaned = 0.000703228 Jy ! Component: 2350 - total flux cleaned = 0.000793053 Jy ! Component: 2400 - total flux cleaned = 0.000837446 Jy ! Component: 2450 - total flux cleaned = 0.000867013 Jy ! Component: 2500 - total flux cleaned = 0.00093983 Jy ! Component: 2550 - total flux cleaned = 0.00102624 Jy ! Component: 2600 - total flux cleaned = 0.00104044 Jy ! Component: 2650 - total flux cleaned = 0.0010971 Jy ! Component: 2700 - total flux cleaned = 0.00113918 Jy ! Component: 2750 - total flux cleaned = 0.001153 Jy ! Component: 2800 - total flux cleaned = 0.00119451 Jy ! Component: 2850 - total flux cleaned = 0.00122204 Jy ! Component: 2900 - total flux cleaned = 0.00122198 Jy ! Component: 2950 - total flux cleaned = 0.00124903 Jy ! Component: 3000 - total flux cleaned = 0.00123544 Jy ! Component: 3050 - total flux cleaned = 0.0012752 Jy ! Component: 3100 - total flux cleaned = 0.00126185 Jy ! Component: 3150 - total flux cleaned = 0.00124869 Jy ! Component: 3200 - total flux cleaned = 0.00122265 Jy ! Component: 3250 - total flux cleaned = 0.00122256 Jy ! Component: 3300 - total flux cleaned = 0.00123546 Jy ! Component: 3350 - total flux cleaned = 0.00123557 Jy ! Component: 3400 - total flux cleaned = 0.00124836 Jy ! Component: 3450 - total flux cleaned = 0.00126106 Jy ! Component: 3500 - total flux cleaned = 0.00129875 Jy ! Component: 3550 - total flux cleaned = 0.00131118 Jy ! Component: 3600 - total flux cleaned = 0.00132351 Jy ! Component: 3650 - total flux cleaned = 0.00127404 Jy ! Component: 3700 - total flux cleaned = 0.00133558 Jy ! Component: 3750 - total flux cleaned = 0.00131112 Jy ! Component: 3800 - total flux cleaned = 0.00133556 Jy ! Component: 3850 - total flux cleaned = 0.00131131 Jy ! Component: 3900 - total flux cleaned = 0.00129918 Jy ! Component: 3950 - total flux cleaned = 0.00122703 Jy ! Component: 4000 - total flux cleaned = 0.0012031 Jy ! Component: 4050 - total flux cleaned = 0.0011555 Jy ! Total flux subtracted in 4096 components = 0.00107242 Jy ! Clean residual min=-0.000781 max=0.000666 Jy/beam ! Clean residual mean=0.000004 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.0900225 Jy keep ! Adding 229 model components to the UV plane model. ! The established model now contains 314 components and 0.0900225 Jy ![Exited script file: muppet] wmap "J0905-3927_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.942 x 7.874 at -7.65 degrees (North through East) ! Clean map min=-0.0014996 max=0.065482 Jy/beam ! Writing clean map to FITS file: J0905-3927_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0654819 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000199998 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.916275 0.916275 1.83255 3.6651 7.3302 14.6604 29.3208 58.6416 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.065 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.942 x 7.874 at -7.65 degrees (North through East) ! Clean map min=-0.0014996 max=0.065482 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0905-3927_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:49:31 2019