! Started logfile: J0905+2052_S_2017_09_26_pus_uvs.log on Sat May 11 12:59:05 2019 obs J0905+2052_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0905+2052_S_2017_09_26_pus_uva.fits ! AN table 1: 175 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.765238 visibilities/baseline/integration-bin. ! Found source: J0905+2052 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 19284 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0905+2052_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 218 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 188 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 802 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.900341Jy sigma=0.007994 ! Fit after self-cal, rms=0.882528Jy sigma=0.007852 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.169 mas, bmaj=8.013 mas, bpa=-25.04 degrees ! Estimated noise=1336.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0894683 Jy ! Component: 100 - total flux cleaned = 0.110237 Jy ! Total flux subtracted in 100 components = 0.110237 Jy ! Clean residual min=-0.006743 max=0.008511 Jy/beam ! Clean residual mean=-0.000029 rms=0.001870 Jy/beam ! Combined flux in latest and established models = 0.110237 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.110237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084223Jy sigma=0.000698 ! Fit after self-cal, rms=0.084194Jy sigma=0.000698 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.02 mas, bmaj=9.118 mas, bpa=-23.63 degrees ! Estimated noise=646.014 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0145646 Jy ! Component: 100 - total flux cleaned = 0.0231634 Jy ! Component: 150 - total flux cleaned = 0.0289202 Jy ! Component: 200 - total flux cleaned = 0.0329448 Jy ! Total flux subtracted in 200 components = 0.0329448 Jy ! Clean residual min=-0.003711 max=0.004777 Jy/beam ! Clean residual mean=-0.000047 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.143181 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 58 components and 0.143181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081379Jy sigma=0.000673 ! Fit after self-cal, rms=0.081229Jy sigma=0.000672 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.00* HN 0.94 KP 1.00 ! LA 0.97 MK 1.01 NL 0.91 OV 1.02 ! PT 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 FD 1.00* HN 0.97 KP 0.97 ! LA 0.95 MK 1.02 NL 1.14 OV 1.05 ! PT 0.93 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 1.00* HN 0.97 KP 0.95 ! LA 0.97 MK 1.05 NL 1.19 OV 0.96 ! PT 0.94 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 0.99 KP 1.00* ! LA 0.90 MK 1.15 NL 1.00* OV 1.56 ! PT 0.96 ! ! ! Fit before self-cal, rms=0.081229Jy sigma=0.000672 ! Fit after self-cal, rms=0.081222Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.074 mas, bmaj=9.125 mas, bpa=-23.4 degrees ! Estimated noise=636.958 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317805 Jy ! Component: 100 - total flux cleaned = 0.00367399 Jy ! Component: 150 - total flux cleaned = 0.00376983 Jy ! Component: 200 - total flux cleaned = 0.00388544 Jy ! Total flux subtracted in 200 components = 0.00388544 Jy ! Clean residual min=-0.002384 max=0.002763 Jy/beam ! Clean residual mean=-0.000020 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.147067 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 81 components and 0.147067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081094Jy sigma=0.000659 ! Fit after self-cal, rms=0.081242Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081242Jy sigma=0.000659 ! Fit after self-cal, rms=0.081549Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.07 mas, bmaj=9.105 mas, bpa=-23.43 degrees ! Estimated noise=636.741 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143569 Jy ! Component: 100 - total flux cleaned = 0.00160725 Jy ! Component: 150 - total flux cleaned = 0.00157508 Jy ! Component: 200 - total flux cleaned = 0.00146353 Jy ! Total flux subtracted in 200 components = 0.00146353 Jy ! Clean residual min=-0.001733 max=0.002660 Jy/beam ! Clean residual mean=-0.000009 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.14853 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 94 components and 0.14853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081508Jy sigma=0.000655 ! Fit after self-cal, rms=0.081517Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (50.5, -24). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022875 Jy ! Component: 100 - total flux cleaned = 0.00346447 Jy ! Component: 150 - total flux cleaned = 0.00401698 Jy ! Component: 200 - total flux cleaned = 0.00432922 Jy ! Total flux subtracted in 200 components = 0.00432922 Jy ! Clean residual min=-0.001589 max=0.002379 Jy/beam ! Clean residual mean=-0.000003 rms=0.000485 Jy/beam ! Combined flux in latest and established models = 0.15286 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 124 components and 0.15286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081452Jy sigma=0.000654 ! Fit after self-cal, rms=0.081444Jy sigma=0.000654 ! Inverting map ! Added new window around map position (-88, -111.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207666 Jy ! Component: 100 - total flux cleaned = 0.00277696 Jy ! Component: 150 - total flux cleaned = 0.00306064 Jy ! Component: 200 - total flux cleaned = 0.00328412 Jy ! Total flux subtracted in 200 components = 0.00328412 Jy ! Clean residual min=-0.001516 max=0.001592 Jy/beam ! Clean residual mean=-0.000003 rms=0.000421 Jy/beam ! Combined flux in latest and established models = 0.156144 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 152 components and 0.156144 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081378Jy sigma=0.000653 ! Fit after self-cal, rms=0.081367Jy sigma=0.000653 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081367Jy sigma=0.000653 ! Fit after self-cal, rms=0.081295Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.071 mas, bmaj=9.101 mas, bpa=-23.48 degrees ! Estimated noise=636.565 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000906525 Jy ! Component: 100 - total flux cleaned = 0.00134814 Jy ! Component: 150 - total flux cleaned = 0.00169451 Jy ! Component: 200 - total flux cleaned = 0.00190947 Jy ! Total flux subtracted in 200 components = 0.00190947 Jy ! Clean residual min=-0.001335 max=0.001513 Jy/beam ! Clean residual mean=-0.000003 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.158053 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 170 components and 0.158053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081271Jy sigma=0.000653 ! Fit after self-cal, rms=0.081266Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000299082 Jy ! Component: 100 - total flux cleaned = 0.000498675 Jy ! Component: 150 - total flux cleaned = 0.000711826 Jy ! Component: 200 - total flux cleaned = 0.000913531 Jy ! Total flux subtracted in 200 components = 0.000913531 Jy ! Clean residual min=-0.001275 max=0.001446 Jy/beam ! Clean residual mean=-0.000001 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.158967 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 181 components and 0.158967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081251Jy sigma=0.000653 ! Fit after self-cal, rms=0.081248Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081248Jy sigma=0.000653 ! Fit after self-cal, rms=0.081265Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.752 mas, bmaj=11.19 mas, bpa=-17.29 degrees ! Estimated noise=739.724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000864985 Jy ! Component: 100 - total flux cleaned = 0.00137169 Jy ! Component: 150 - total flux cleaned = 0.00165929 Jy ! Component: 200 - total flux cleaned = 0.00187255 Jy ! Total flux subtracted in 200 components = 0.00187255 Jy ! Clean residual min=-0.001346 max=0.001660 Jy/beam ! Clean residual mean=-0.000001 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.160839 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 202 components and 0.160839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081254Jy sigma=0.000653 ! Fit after self-cal, rms=0.081248Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0003298 Jy ! Component: 100 - total flux cleaned = 0.000437296 Jy ! Component: 150 - total flux cleaned = 0.000537128 Jy ! Component: 200 - total flux cleaned = 0.0005738 Jy ! Total flux subtracted in 200 components = 0.0005738 Jy ! Clean residual min=-0.001277 max=0.001609 Jy/beam ! Clean residual mean=0.000002 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.161413 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 220 components and 0.161413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081244Jy sigma=0.000653 ! Fit after self-cal, rms=0.081241Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.072 mas, bmaj=9.1 mas, bpa=-23.5 degrees ! Estimated noise=637.083 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.072 x 9.1 at -23.5 degrees (North through East) ! Clean map min=-0.0014122 max=0.11666 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.22 mas, bmaj=8.002 mas, bpa=-24.66 degrees ! Estimated noise=1330.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0886601 Jy ! Component: 100 - total flux cleaned = 0.109422 Jy ! Component: 150 - total flux cleaned = 0.119912 Jy ! Component: 200 - total flux cleaned = 0.127484 Jy ! Total flux subtracted in 200 components = 0.127484 Jy ! Clean residual min=-0.005126 max=0.005269 Jy/beam ! Clean residual mean=-0.000017 rms=0.001282 Jy/beam ! Combined flux in latest and established models = 0.127484 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.127484 Jy ! Inverting map and beam ! Estimated beam: bmin=4.072 mas, bmaj=9.1 mas, bpa=-23.5 degrees ! Estimated noise=637.083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00798898 Jy ! Component: 100 - total flux cleaned = 0.0130989 Jy ! Component: 150 - total flux cleaned = 0.0166658 Jy ! Component: 200 - total flux cleaned = 0.0195004 Jy ! Total flux subtracted in 200 components = 0.0195004 Jy ! Clean residual min=-0.002040 max=0.002316 Jy/beam ! Clean residual mean=-0.000020 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.146984 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 59 components and 0.146984 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.752 mas, bmaj=11.19 mas, bpa=-17.29 degrees ! Estimated noise=739.724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0033627 Jy ! Component: 100 - total flux cleaned = 0.00582281 Jy ! Component: 150 - total flux cleaned = 0.00720432 Jy ! Component: 200 - total flux cleaned = 0.00839151 Jy ! Total flux subtracted in 200 components = 0.00839151 Jy ! Clean residual min=-0.001928 max=0.002227 Jy/beam ! Clean residual mean=-0.000015 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.155376 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00103026 Jy ! Component: 100 - total flux cleaned = 0.00188259 Jy ! Component: 150 - total flux cleaned = 0.00254877 Jy ! Component: 200 - total flux cleaned = 0.00302177 Jy ! Total flux subtracted in 200 components = 0.00302177 Jy ! Clean residual min=-0.001629 max=0.001853 Jy/beam ! Clean residual mean=-0.000010 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.158398 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 131 components and 0.158398 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.072 mas, bmaj=9.1 mas, bpa=-23.5 degrees ! Estimated noise=637.083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000232056 Jy ! Component: 100 - total flux cleaned = 0.000435046 Jy ! Component: 150 - total flux cleaned = 0.000616638 Jy ! Component: 200 - total flux cleaned = 0.000684749 Jy ! Total flux subtracted in 200 components = 0.000684749 Jy ! Clean residual min=-0.001449 max=0.001611 Jy/beam ! Clean residual mean=-0.000002 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.159082 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 151 components and 0.159082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081290Jy sigma=0.000653 ! Fit after self-cal, rms=0.081289Jy sigma=0.000653 wmodel J0905+2052_S_2017_09_26_pus_map.mod ! Writing 151 model components to file: J0905+2052_S_2017_09_26_pus_map.mod wobs J0905+2052_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0905+2052_S_2017_09_26_pus_uvs.fits wwins J0905+2052_S_2017_09_26_pus_map.win ! wwins: Wrote 4 windows to J0905+2052_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000529059 Jy ! Component: 100 - total flux cleaned = 0.000778602 Jy ! Component: 150 - total flux cleaned = 0.000967413 Jy ! Component: 200 - total flux cleaned = 0.00101262 Jy ! Component: 250 - total flux cleaned = 0.00109892 Jy ! Component: 300 - total flux cleaned = 0.00120247 Jy ! Component: 350 - total flux cleaned = 0.00128226 Jy ! Component: 400 - total flux cleaned = 0.00126257 Jy ! Component: 450 - total flux cleaned = 0.0012626 Jy ! Component: 500 - total flux cleaned = 0.0012811 Jy ! Component: 550 - total flux cleaned = 0.00135261 Jy ! Component: 600 - total flux cleaned = 0.00143938 Jy ! Component: 650 - total flux cleaned = 0.00143888 Jy ! Component: 700 - total flux cleaned = 0.00148857 Jy ! Component: 750 - total flux cleaned = 0.00156979 Jy ! Component: 800 - total flux cleaned = 0.00164878 Jy ! Component: 850 - total flux cleaned = 0.0016955 Jy ! Component: 900 - total flux cleaned = 0.00177153 Jy ! Component: 950 - total flux cleaned = 0.00186061 Jy ! Component: 1000 - total flux cleaned = 0.00191875 Jy ! Component: 1050 - total flux cleaned = 0.00194714 Jy ! Component: 1100 - total flux cleaned = 0.00196115 Jy ! Component: 1150 - total flux cleaned = 0.00196109 Jy ! Component: 1200 - total flux cleaned = 0.00198841 Jy ! Component: 1250 - total flux cleaned = 0.00197512 Jy ! Component: 1300 - total flux cleaned = 0.00201459 Jy ! Component: 1350 - total flux cleaned = 0.00201458 Jy ! Component: 1400 - total flux cleaned = 0.0020402 Jy ! Component: 1450 - total flux cleaned = 0.0020152 Jy ! Component: 1500 - total flux cleaned = 0.00202788 Jy ! Component: 1550 - total flux cleaned = 0.00205234 Jy ! Component: 1600 - total flux cleaned = 0.00202826 Jy ! Component: 1650 - total flux cleaned = 0.00204003 Jy ! Component: 1700 - total flux cleaned = 0.00205191 Jy ! Component: 1750 - total flux cleaned = 0.00205178 Jy ! Component: 1800 - total flux cleaned = 0.00206318 Jy ! Component: 1850 - total flux cleaned = 0.00208562 Jy ! Component: 1900 - total flux cleaned = 0.00204055 Jy ! Component: 1950 - total flux cleaned = 0.00208479 Jy ! Component: 2000 - total flux cleaned = 0.00204084 Jy ! Component: 2050 - total flux cleaned = 0.0020409 Jy ! Component: 2100 - total flux cleaned = 0.00204094 Jy ! Component: 2150 - total flux cleaned = 0.00204095 Jy ! Component: 2200 - total flux cleaned = 0.00203045 Jy ! Component: 2250 - total flux cleaned = 0.00205134 Jy ! Component: 2300 - total flux cleaned = 0.00205146 Jy ! Component: 2350 - total flux cleaned = 0.00206163 Jy ! Component: 2400 - total flux cleaned = 0.00209186 Jy ! Component: 2450 - total flux cleaned = 0.00211185 Jy ! Component: 2500 - total flux cleaned = 0.00211177 Jy ! Component: 2550 - total flux cleaned = 0.00216079 Jy ! Component: 2600 - total flux cleaned = 0.002151 Jy ! Component: 2650 - total flux cleaned = 0.00220877 Jy ! Component: 2700 - total flux cleaned = 0.00222778 Jy ! Component: 2750 - total flux cleaned = 0.00220885 Jy ! Component: 2800 - total flux cleaned = 0.00225578 Jy ! Component: 2850 - total flux cleaned = 0.00225575 Jy ! Component: 2900 - total flux cleaned = 0.00224651 Jy ! Component: 2950 - total flux cleaned = 0.00230157 Jy ! Component: 3000 - total flux cleaned = 0.00231063 Jy ! Component: 3050 - total flux cleaned = 0.00231069 Jy ! Component: 3100 - total flux cleaned = 0.00231077 Jy ! Component: 3150 - total flux cleaned = 0.00234649 Jy ! Component: 3200 - total flux cleaned = 0.00235536 Jy ! Component: 3250 - total flux cleaned = 0.0023817 Jy ! Component: 3300 - total flux cleaned = 0.00239052 Jy ! Component: 3350 - total flux cleaned = 0.00238183 Jy ! Component: 3400 - total flux cleaned = 0.00238183 Jy ! Component: 3450 - total flux cleaned = 0.00243313 Jy ! Component: 3500 - total flux cleaned = 0.00242465 Jy ! Component: 3550 - total flux cleaned = 0.0024584 Jy ! Component: 3600 - total flux cleaned = 0.00247514 Jy ! Component: 3650 - total flux cleaned = 0.00250013 Jy ! Component: 3700 - total flux cleaned = 0.00251675 Jy ! Component: 3750 - total flux cleaned = 0.00251678 Jy ! Component: 3800 - total flux cleaned = 0.00254129 Jy ! Component: 3850 - total flux cleaned = 0.00254946 Jy ! Component: 3900 - total flux cleaned = 0.00257372 Jy ! Component: 3950 - total flux cleaned = 0.00258174 Jy ! Component: 4000 - total flux cleaned = 0.00257367 Jy ! Component: 4050 - total flux cleaned = 0.00256569 Jy ! Total flux subtracted in 4096 components = 0.00258152 Jy ! Clean residual min=-0.000474 max=0.000427 Jy/beam ! Clean residual mean=-0.000004 rms=0.000147 Jy/beam ! Combined flux in latest and established models = 0.161664 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 413 components and 0.161664 Jy ![Exited script file: muppet] wmap "J0905+2052_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.072 x 9.1 at -23.5 degrees (North through East) ! Clean map min=-0.0010416 max=0.11616 Jy/beam ! Writing clean map to FITS file: J0905+2052_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.11616 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00014681 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.379155 0.379155 0.758311 1.51662 3.03324 6.06649 12.133 24.2659 48.5319 97.0638 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.116 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.072 x 9.1 at -23.5 degrees (North through East) ! Clean map min=-0.0010416 max=0.11616 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0905+2052_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:59:11 2019