! Started logfile: J0904-3514_S_2017_10_21_pus_uvs.log on Sat May 11 20:54:51 2019 obs J0904-3514_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0904-3514_S_2017_10_21_pus_uva.fits ! AN table 1: 115 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.664976 visibilities/baseline/integration-bin. ! Found source: J0904-3514 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 11012 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0904-3514_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 199 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 184 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 184 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 577 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.762424Jy sigma=0.004661 ! Fit after self-cal, rms=0.732096Jy sigma=0.004453 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.728 mas, bmaj=19.42 mas, bpa=-18.36 degrees ! Estimated noise=2179.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.202422 Jy ! Component: 100 - total flux cleaned = 0.280699 Jy ! Total flux subtracted in 100 components = 0.280699 Jy ! Clean residual min=-0.017291 max=0.036928 Jy/beam ! Clean residual mean=0.000075 rms=0.006524 Jy/beam ! Combined flux in latest and established models = 0.280699 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.280699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161903Jy sigma=0.000942 ! Fit after self-cal, rms=0.161688Jy sigma=0.000941 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=21.95 mas, bpa=-18.14 degrees ! Estimated noise=1235.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0640593 Jy ! Component: 100 - total flux cleaned = 0.094606 Jy ! Component: 150 - total flux cleaned = 0.11098 Jy ! Component: 200 - total flux cleaned = 0.120323 Jy ! Total flux subtracted in 200 components = 0.120323 Jy ! Clean residual min=-0.009246 max=0.009123 Jy/beam ! Clean residual mean=-0.000088 rms=0.002905 Jy/beam ! Combined flux in latest and established models = 0.401022 Jy ! Performing phase self-cal ! Adding 80 model components to the UV plane model. ! The established model now contains 113 components and 0.401023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138780Jy sigma=0.000762 ! Fit after self-cal, rms=0.138614Jy sigma=0.000762 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.10 KP 1.10 ! LA 1.03 MK 1.07 NL 0.89 OV 0.92 ! PT 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.25 KP 1.04 ! LA 1.00 MK 1.02 NL 1.06 OV 0.96 ! PT 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.08 KP 1.06 ! LA 0.77 MK 1.04 NL 1.21 OV 0.86 ! PT 0.97 ! ! ! Correcting IF 4. ! A total of 135 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.03 KP 1.00* ! LA 1.20 MK 0.86 NL 1.00* OV 1.00* ! PT 1.01 ! ! ! Fit before self-cal, rms=0.138614Jy sigma=0.000762 ! Fit after self-cal, rms=0.136051Jy sigma=0.000724 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.67 mas, bmaj=22.27 mas, bpa=-18.45 degrees ! Estimated noise=1245.92 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00322355 Jy ! Component: 100 - total flux cleaned = -0.00322199 Jy ! Component: 150 - total flux cleaned = -0.00313031 Jy ! Component: 200 - total flux cleaned = -0.00304849 Jy ! Total flux subtracted in 200 components = -0.00304849 Jy ! Clean residual min=-0.005654 max=0.004603 Jy/beam ! Clean residual mean=-0.000013 rms=0.001511 Jy/beam ! Combined flux in latest and established models = 0.397974 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 129 components and 0.397974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135792Jy sigma=0.000723 ! Fit after self-cal, rms=0.135953Jy sigma=0.000723 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135953Jy sigma=0.000723 ! Fit after self-cal, rms=0.139816Jy sigma=0.000720 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.701 mas, bmaj=22.79 mas, bpa=-18.73 degrees ! Estimated noise=1253.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00237519 Jy ! Component: 100 - total flux cleaned = -0.0027502 Jy ! Component: 150 - total flux cleaned = -0.00290913 Jy ! Component: 200 - total flux cleaned = -0.00283446 Jy ! Total flux subtracted in 200 components = -0.00283446 Jy ! Clean residual min=-0.004826 max=0.004106 Jy/beam ! Clean residual mean=-0.000018 rms=0.001199 Jy/beam ! Combined flux in latest and established models = 0.39514 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 154 components and 0.39514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139650Jy sigma=0.000720 ! Fit after self-cal, rms=0.139705Jy sigma=0.000720 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000133659 Jy ! Component: 100 - total flux cleaned = 0.000200543 Jy ! Component: 150 - total flux cleaned = 0.000326731 Jy ! Component: 200 - total flux cleaned = 0.000386476 Jy ! Total flux subtracted in 200 components = 0.000386476 Jy ! Clean residual min=-0.004700 max=0.004034 Jy/beam ! Clean residual mean=-0.000018 rms=0.001182 Jy/beam ! Combined flux in latest and established models = 0.395526 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 165 components and 0.395526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139617Jy sigma=0.000719 ! Fit after self-cal, rms=0.139629Jy sigma=0.000719 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139629Jy sigma=0.000719 ! Fit after self-cal, rms=0.141854Jy sigma=0.000719 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.712 mas, bmaj=22.95 mas, bpa=-18.83 degrees ! Estimated noise=1255.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00195903 Jy ! Component: 100 - total flux cleaned = -0.00233648 Jy ! Component: 150 - total flux cleaned = -0.00240256 Jy ! Component: 200 - total flux cleaned = -0.00240234 Jy ! Total flux subtracted in 200 components = -0.00240234 Jy ! Clean residual min=-0.004350 max=0.003835 Jy/beam ! Clean residual mean=-0.000017 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.393124 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 171 components and 0.393124 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141743Jy sigma=0.000719 ! Fit after self-cal, rms=0.141786Jy sigma=0.000719 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107234 Jy ! Component: 100 - total flux cleaned = 0.000160393 Jy ! Component: 150 - total flux cleaned = 0.000262553 Jy ! Component: 200 - total flux cleaned = 0.000310912 Jy ! Total flux subtracted in 200 components = 0.000310912 Jy ! Clean residual min=-0.004255 max=0.003773 Jy/beam ! Clean residual mean=-0.000017 rms=0.001111 Jy/beam ! Combined flux in latest and established models = 0.393435 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 174 components and 0.393435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141727Jy sigma=0.000719 ! Fit after self-cal, rms=0.141737Jy sigma=0.000719 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141737Jy sigma=0.000719 ! Fit after self-cal, rms=0.143744Jy sigma=0.000719 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.821 mas, bmaj=40.88 mas, bpa=-10.54 degrees ! Estimated noise=1372.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119252 Jy ! Component: 100 - total flux cleaned = -0.00116089 Jy ! Component: 150 - total flux cleaned = -0.00113237 Jy ! Component: 200 - total flux cleaned = -0.00113244 Jy ! Total flux subtracted in 200 components = -0.00113244 Jy ! Clean residual min=-0.004121 max=0.003796 Jy/beam ! Clean residual mean=-0.000021 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.392302 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 179 components and 0.392302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143698Jy sigma=0.000718 ! Fit after self-cal, rms=0.143728Jy sigma=0.000718 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000187925 Jy ! Component: 100 - total flux cleaned = 0.000213563 Jy ! Component: 150 - total flux cleaned = 0.000238444 Jy ! Component: 200 - total flux cleaned = 0.000284968 Jy ! Total flux subtracted in 200 components = 0.000284968 Jy ! Clean residual min=-0.004132 max=0.003761 Jy/beam ! Clean residual mean=-0.000022 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.392587 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 181 components and 0.392587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143710Jy sigma=0.000718 ! Fit after self-cal, rms=0.143713Jy sigma=0.000718 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.721 mas, bmaj=23.09 mas, bpa=-18.93 degrees ! Estimated noise=1257.96 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.721 x 23.09 at -18.93 degrees (North through East) ! Clean map min=-0.0039487 max=0.28218 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.777 mas, bmaj=20.26 mas, bpa=-18.95 degrees ! Estimated noise=2283.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.207556 Jy ! Component: 100 - total flux cleaned = 0.284364 Jy ! Component: 150 - total flux cleaned = 0.32454 Jy ! Component: 200 - total flux cleaned = 0.347212 Jy ! Total flux subtracted in 200 components = 0.347212 Jy ! Clean residual min=-0.009366 max=0.013021 Jy/beam ! Clean residual mean=0.000034 rms=0.003129 Jy/beam ! Combined flux in latest and established models = 0.347212 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 58 model components to the UV plane model. ! The established model now contains 58 components and 0.347212 Jy ! Inverting map and beam ! Estimated beam: bmin=3.721 mas, bmaj=23.09 mas, bpa=-18.93 degrees ! Estimated noise=1257.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0205768 Jy ! Component: 100 - total flux cleaned = 0.0307368 Jy ! Component: 150 - total flux cleaned = 0.0365481 Jy ! Component: 200 - total flux cleaned = 0.0400681 Jy ! Total flux subtracted in 200 components = 0.0400681 Jy ! Clean residual min=-0.004172 max=0.003439 Jy/beam ! Clean residual mean=-0.000016 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.38728 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 137 components and 0.38728 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.821 mas, bmaj=40.88 mas, bpa=-10.54 degrees ! Estimated noise=1372.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0028753 Jy ! Component: 100 - total flux cleaned = 0.00433908 Jy ! Component: 150 - total flux cleaned = 0.00498153 Jy ! Component: 200 - total flux cleaned = 0.00507776 Jy ! Total flux subtracted in 200 components = 0.00507776 Jy ! Clean residual min=-0.004042 max=0.003741 Jy/beam ! Clean residual mean=-0.000022 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.392358 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.91133e-05 Jy ! Component: 100 - total flux cleaned = 0.000156478 Jy ! Component: 150 - total flux cleaned = 0.000239328 Jy ! Component: 200 - total flux cleaned = 0.000298488 Jy ! Total flux subtracted in 200 components = 0.000298488 Jy ! Clean residual min=-0.004063 max=0.003737 Jy/beam ! Clean residual mean=-0.000021 rms=0.001102 Jy/beam ! Combined flux in latest and established models = 0.392657 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 153 components and 0.392657 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.721 mas, bmaj=23.09 mas, bpa=-18.93 degrees ! Estimated noise=1257.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000202818 Jy ! Component: 100 - total flux cleaned = -0.000163917 Jy ! Component: 150 - total flux cleaned = -0.000129178 Jy ! Component: 200 - total flux cleaned = -9.65298e-05 Jy ! Total flux subtracted in 200 components = -9.65298e-05 Jy ! Clean residual min=-0.003782 max=0.003724 Jy/beam ! Clean residual mean=-0.000014 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.39256 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 168 components and 0.39256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143608Jy sigma=0.000718 ! Fit after self-cal, rms=0.143616Jy sigma=0.000718 wmodel J0904-3514_S_2017_10_21_pus_map.mod ! Writing 168 model components to file: J0904-3514_S_2017_10_21_pus_map.mod wobs J0904-3514_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0904-3514_S_2017_10_21_pus_uvs.fits wwins J0904-3514_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0904-3514_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105679 Jy ! Component: 100 - total flux cleaned = -0.00206985 Jy ! Component: 150 - total flux cleaned = -0.00283733 Jy ! Component: 200 - total flux cleaned = -0.00345411 Jy ! Component: 250 - total flux cleaned = -0.00393281 Jy ! Component: 300 - total flux cleaned = -0.00408343 Jy ! Component: 350 - total flux cleaned = -0.00427734 Jy ! Component: 400 - total flux cleaned = -0.00441888 Jy ! Component: 450 - total flux cleaned = -0.00446541 Jy ! Component: 500 - total flux cleaned = -0.00472817 Jy ! Component: 550 - total flux cleaned = -0.00489707 Jy ! Component: 600 - total flux cleaned = -0.00506207 Jy ! Component: 650 - total flux cleaned = -0.00530318 Jy ! Component: 700 - total flux cleaned = -0.00534316 Jy ! Component: 750 - total flux cleaned = -0.00549789 Jy ! Component: 800 - total flux cleaned = -0.00557209 Jy ! Component: 850 - total flux cleaned = -0.00560796 Jy ! Component: 900 - total flux cleaned = -0.00564356 Jy ! Component: 950 - total flux cleaned = -0.00571392 Jy ! Component: 1000 - total flux cleaned = -0.00595322 Jy ! Component: 1050 - total flux cleaned = -0.00608695 Jy ! Component: 1100 - total flux cleaned = -0.00628356 Jy ! Component: 1150 - total flux cleaned = -0.00647623 Jy ! Component: 1200 - total flux cleaned = -0.00657081 Jy ! Component: 1250 - total flux cleaned = -0.00666453 Jy ! Component: 1300 - total flux cleaned = -0.00684802 Jy ! Component: 1350 - total flux cleaned = -0.00696771 Jy ! Component: 1400 - total flux cleaned = -0.00714429 Jy ! Component: 1450 - total flux cleaned = -0.00731788 Jy ! Component: 1500 - total flux cleaned = -0.00746025 Jy ! Component: 1550 - total flux cleaned = -0.00754442 Jy ! Component: 1600 - total flux cleaned = -0.00762791 Jy ! Component: 1650 - total flux cleaned = -0.00773793 Jy ! Component: 1700 - total flux cleaned = -0.00784681 Jy ! Component: 1750 - total flux cleaned = -0.00800845 Jy ! Component: 1800 - total flux cleaned = -0.00819463 Jy ! Component: 1850 - total flux cleaned = -0.00824674 Jy ! Component: 1900 - total flux cleaned = -0.00832522 Jy ! Component: 1950 - total flux cleaned = -0.00853207 Jy ! Component: 2000 - total flux cleaned = -0.00863424 Jy ! Component: 2050 - total flux cleaned = -0.00868495 Jy ! Component: 2100 - total flux cleaned = -0.00878504 Jy ! Component: 2150 - total flux cleaned = -0.00883467 Jy ! Component: 2200 - total flux cleaned = -0.00895779 Jy ! Component: 2250 - total flux cleaned = -0.00898233 Jy ! Component: 2300 - total flux cleaned = -0.00907927 Jy ! Component: 2350 - total flux cleaned = -0.00915118 Jy ! Component: 2400 - total flux cleaned = -0.0091986 Jy ! Component: 2450 - total flux cleaned = -0.00926924 Jy ! Component: 2500 - total flux cleaned = -0.00931577 Jy ! Component: 2550 - total flux cleaned = -0.00938529 Jy ! Component: 2600 - total flux cleaned = -0.00938532 Jy ! Component: 2650 - total flux cleaned = -0.00947654 Jy ! Component: 2700 - total flux cleaned = -0.00949906 Jy ! Component: 2750 - total flux cleaned = -0.00952145 Jy ! Component: 2800 - total flux cleaned = -0.00956577 Jy ! Component: 2850 - total flux cleaned = -0.00954379 Jy ! Component: 2900 - total flux cleaned = -0.00967544 Jy ! Component: 2950 - total flux cleaned = -0.00969729 Jy ! Component: 3000 - total flux cleaned = -0.00978406 Jy ! Component: 3050 - total flux cleaned = -0.0098483 Jy ! Component: 3100 - total flux cleaned = -0.00993325 Jy ! Component: 3150 - total flux cleaned = -0.00995449 Jy ! Component: 3200 - total flux cleaned = -0.0100175 Jy ! Component: 3250 - total flux cleaned = -0.0100596 Jy ! Component: 3300 - total flux cleaned = -0.0101423 Jy ! Component: 3350 - total flux cleaned = -0.0101835 Jy ! Component: 3400 - total flux cleaned = -0.0102243 Jy ! Component: 3450 - total flux cleaned = -0.0102648 Jy ! Component: 3500 - total flux cleaned = -0.0102447 Jy ! Component: 3550 - total flux cleaned = -0.010305 Jy ! Component: 3600 - total flux cleaned = -0.0103451 Jy ! Component: 3650 - total flux cleaned = -0.0104644 Jy ! Component: 3700 - total flux cleaned = -0.0105039 Jy ! Component: 3750 - total flux cleaned = -0.0106417 Jy ! Component: 3800 - total flux cleaned = -0.0106418 Jy ! Component: 3850 - total flux cleaned = -0.0107978 Jy ! Component: 3900 - total flux cleaned = -0.0108756 Jy ! Component: 3950 - total flux cleaned = -0.0109916 Jy ! Component: 4000 - total flux cleaned = -0.0111263 Jy ! Component: 4050 - total flux cleaned = -0.0112221 Jy ! Total flux subtracted in 4096 components = -0.0113365 Jy ! Clean residual min=-0.000998 max=0.000998 Jy/beam ! Clean residual mean=-0.000004 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.381223 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 482 components and 0.381223 Jy ![Exited script file: muppet] wmap "J0904-3514_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.721 x 23.09 at -18.93 degrees (North through East) ! Clean map min=-0.0026835 max=0.28091 Jy/beam ! Writing clean map to FITS file: J0904-3514_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.280911 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000366191 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.391076 0.391076 0.782152 1.5643 3.12861 6.25722 12.5144 25.0289 50.0577 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.28 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.721 x 23.09 at -18.93 degrees (North through East) ! Clean map min=-0.0026835 max=0.28091 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0904-3514_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:54:56 2019