! Started logfile: J0904-3514_S_2017_10_09_pus_uvs.log on Sun May 12 13:08:21 2019 obs J0904-3514_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0904-3514_S_2017_10_09_pus_uva.fits ! AN table 1: 57 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.570663 visibilities/baseline/integration-bin. ! Found source: J0904-3514 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 4684 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0904-3514_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 293 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.838730Jy sigma=0.005047 ! Fit after self-cal, rms=0.809055Jy sigma=0.004879 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.428 mas, bmaj=14.34 mas, bpa=-27.22 degrees ! Estimated noise=3597.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.143691 Jy ! Component: 100 - total flux cleaned = 0.209423 Jy ! Total flux subtracted in 100 components = 0.209423 Jy ! Clean residual min=-0.018638 max=0.037161 Jy/beam ! Clean residual mean=0.000014 rms=0.009119 Jy/beam ! Combined flux in latest and established models = 0.209423 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.209423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163544Jy sigma=0.000970 ! Fit after self-cal, rms=0.163292Jy sigma=0.000968 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.898 mas, bmaj=15.75 mas, bpa=-25.93 degrees ! Estimated noise=1888.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0682178 Jy ! Component: 100 - total flux cleaned = 0.105837 Jy ! Component: 150 - total flux cleaned = 0.129196 Jy ! Component: 200 - total flux cleaned = 0.144721 Jy ! Total flux subtracted in 200 components = 0.144721 Jy ! Clean residual min=-0.011751 max=0.011858 Jy/beam ! Clean residual mean=-0.000046 rms=0.004298 Jy/beam ! Combined flux in latest and established models = 0.354144 Jy ! Performing phase self-cal ! Adding 98 model components to the UV plane model. ! The established model now contains 124 components and 0.354143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132839Jy sigma=0.000760 ! Fit after self-cal, rms=0.132653Jy sigma=0.000758 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 1.14 KP 1.04 ! LA 1.01 MK 1.00 NL 0.93 OV 1.00* ! PT 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.97 HN 1.07 KP 0.98 ! LA 0.93 MK 1.17 NL 0.98 OV 1.00* ! PT 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.07 KP 1.19 ! LA 0.72 MK 1.14 NL 1.26 OV 1.00* ! PT 0.87 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.88 KP 1.00* ! LA 1.00* MK 0.83 NL 1.00* OV 1.00* ! PT 0.93 ! ! ! Fit before self-cal, rms=0.132653Jy sigma=0.000758 ! Fit after self-cal, rms=0.131479Jy sigma=0.000724 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=15.93 mas, bpa=-25.92 degrees ! Estimated noise=1872.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00372196 Jy ! Component: 100 - total flux cleaned = -0.00406879 Jy ! Component: 150 - total flux cleaned = -0.00392476 Jy ! Component: 200 - total flux cleaned = -0.0037849 Jy ! Total flux subtracted in 200 components = -0.0037849 Jy ! Clean residual min=-0.005350 max=0.006615 Jy/beam ! Clean residual mean=-0.000015 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.350359 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 137 components and 0.350359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131317Jy sigma=0.000723 ! Fit after self-cal, rms=0.131531Jy sigma=0.000723 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131531Jy sigma=0.000723 ! Fit after self-cal, rms=0.133085Jy sigma=0.000723 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.98 mas, bmaj=15.99 mas, bpa=-25.96 degrees ! Estimated noise=1887.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00282518 Jy ! Component: 100 - total flux cleaned = -0.00297447 Jy ! Component: 150 - total flux cleaned = -0.0029119 Jy ! Component: 200 - total flux cleaned = -0.00280079 Jy ! Total flux subtracted in 200 components = -0.00280079 Jy ! Clean residual min=-0.005145 max=0.006285 Jy/beam ! Clean residual mean=-0.000013 rms=0.001552 Jy/beam ! Combined flux in latest and established models = 0.347558 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 139 components and 0.347558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132986Jy sigma=0.000722 ! Fit after self-cal, rms=0.133023Jy sigma=0.000722 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.13042e-05 Jy ! Component: 100 - total flux cleaned = 0.000151378 Jy ! Component: 150 - total flux cleaned = 0.000202636 Jy ! Component: 200 - total flux cleaned = 0.000202284 Jy ! Total flux subtracted in 200 components = 0.000202284 Jy ! Clean residual min=-0.005128 max=0.006130 Jy/beam ! Clean residual mean=-0.000013 rms=0.001521 Jy/beam ! Combined flux in latest and established models = 0.34776 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 140 components and 0.34776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132980Jy sigma=0.000722 ! Fit after self-cal, rms=0.132987Jy sigma=0.000722 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132987Jy sigma=0.000722 ! Fit after self-cal, rms=0.134247Jy sigma=0.000722 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.994 mas, bmaj=16.05 mas, bpa=-26.01 degrees ! Estimated noise=1900.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0020272 Jy ! Component: 100 - total flux cleaned = -0.00222787 Jy ! Component: 150 - total flux cleaned = -0.00222699 Jy ! Component: 200 - total flux cleaned = -0.00218187 Jy ! Total flux subtracted in 200 components = -0.00218187 Jy ! Clean residual min=-0.005020 max=0.005867 Jy/beam ! Clean residual mean=-0.000012 rms=0.001468 Jy/beam ! Combined flux in latest and established models = 0.345578 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 144 components and 0.345578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134191Jy sigma=0.000722 ! Fit after self-cal, rms=0.134215Jy sigma=0.000722 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.75599e-05 Jy ! Component: 100 - total flux cleaned = -1.33533e-05 Jy ! Component: 150 - total flux cleaned = -1.34058e-05 Jy ! Component: 200 - total flux cleaned = -1.28374e-05 Jy ! Total flux subtracted in 200 components = -1.28374e-05 Jy ! Clean residual min=-0.005006 max=0.005716 Jy/beam ! Clean residual mean=-0.000012 rms=0.001446 Jy/beam ! Combined flux in latest and established models = 0.345565 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 144 components and 0.345565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134186Jy sigma=0.000721 ! Fit after self-cal, rms=0.134190Jy sigma=0.000721 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134190Jy sigma=0.000721 ! Fit after self-cal, rms=0.135027Jy sigma=0.000721 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.574 mas, bmaj=38.72 mas, bpa=-13.43 degrees ! Estimated noise=2302.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00144105 Jy ! Component: 100 - total flux cleaned = -0.00148104 Jy ! Component: 150 - total flux cleaned = -0.00147988 Jy ! Component: 200 - total flux cleaned = -0.00147933 Jy ! Total flux subtracted in 200 components = -0.00147933 Jy ! Clean residual min=-0.004980 max=0.004923 Jy/beam ! Clean residual mean=-0.000020 rms=0.001628 Jy/beam ! Combined flux in latest and established models = 0.344086 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 153 components and 0.344086 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135006Jy sigma=0.000721 ! Fit after self-cal, rms=0.135027Jy sigma=0.000721 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.81821e-05 Jy ! Component: 100 - total flux cleaned = 4.3503e-05 Jy ! Component: 150 - total flux cleaned = 7.36397e-05 Jy ! Component: 200 - total flux cleaned = 0.000101368 Jy ! Total flux subtracted in 200 components = 0.000101368 Jy ! Clean residual min=-0.004974 max=0.004838 Jy/beam ! Clean residual mean=-0.000020 rms=0.001609 Jy/beam ! Combined flux in latest and established models = 0.344187 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 157 components and 0.344187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135028Jy sigma=0.000721 ! Fit after self-cal, rms=0.135037Jy sigma=0.000721 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=16.08 mas, bpa=-26.03 degrees ! Estimated noise=1907.98 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.004 x 16.08 at -26.03 degrees (North through East) ! Clean map min=-0.010939 max=0.19557 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.483 mas, bmaj=14.32 mas, bpa=-27.34 degrees ! Estimated noise=3647.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.144537 Jy ! Component: 100 - total flux cleaned = 0.210096 Jy ! Component: 150 - total flux cleaned = 0.251701 Jy ! Component: 200 - total flux cleaned = 0.278913 Jy ! Total flux subtracted in 200 components = 0.278913 Jy ! Clean residual min=-0.011199 max=0.016117 Jy/beam ! Clean residual mean=0.000006 rms=0.004308 Jy/beam ! Combined flux in latest and established models = 0.278914 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 64 model components to the UV plane model. ! The established model now contains 64 components and 0.278914 Jy ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=16.08 mas, bpa=-26.03 degrees ! Estimated noise=1907.98 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0284366 Jy ! Component: 100 - total flux cleaned = 0.0438592 Jy ! Component: 150 - total flux cleaned = 0.052694 Jy ! Component: 200 - total flux cleaned = 0.0578293 Jy ! Total flux subtracted in 200 components = 0.0578293 Jy ! Clean residual min=-0.006393 max=0.006890 Jy/beam ! Clean residual mean=-0.000011 rms=0.001898 Jy/beam ! Combined flux in latest and established models = 0.336743 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 115 components and 0.336743 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.574 mas, bmaj=38.72 mas, bpa=-13.43 degrees ! Estimated noise=2302.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543961 Jy ! Component: 100 - total flux cleaned = 0.00622154 Jy ! Component: 150 - total flux cleaned = 0.00631215 Jy ! Component: 200 - total flux cleaned = 0.00639011 Jy ! Total flux subtracted in 200 components = 0.00639011 Jy ! Clean residual min=-0.005402 max=0.006161 Jy/beam ! Clean residual mean=-0.000024 rms=0.001948 Jy/beam ! Combined flux in latest and established models = 0.343133 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.88999e-06 Jy ! Component: 100 - total flux cleaned = 8.92277e-05 Jy ! Component: 150 - total flux cleaned = 0.000243461 Jy ! Component: 200 - total flux cleaned = 0.000318665 Jy ! Total flux subtracted in 200 components = 0.000318665 Jy ! Clean residual min=-0.005287 max=0.005872 Jy/beam ! Clean residual mean=-0.000024 rms=0.001836 Jy/beam ! Combined flux in latest and established models = 0.343452 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 132 components and 0.343451 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.004 mas, bmaj=16.08 mas, bpa=-26.03 degrees ! Estimated noise=1907.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110477 Jy ! Component: 100 - total flux cleaned = -0.000916514 Jy ! Component: 150 - total flux cleaned = -0.000838791 Jy ! Component: 200 - total flux cleaned = -0.000839607 Jy ! Total flux subtracted in 200 components = -0.000839607 Jy ! Clean residual min=-0.005348 max=0.005849 Jy/beam ! Clean residual mean=-0.000012 rms=0.001532 Jy/beam ! Combined flux in latest and established models = 0.342612 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 147 components and 0.342612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135101Jy sigma=0.000722 ! Fit after self-cal, rms=0.135025Jy sigma=0.000722 wmodel J0904-3514_S_2017_10_09_pus_map.mod ! Writing 147 model components to file: J0904-3514_S_2017_10_09_pus_map.mod wobs J0904-3514_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0904-3514_S_2017_10_09_pus_uvs.fits wwins J0904-3514_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0904-3514_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016784 Jy ! Component: 100 - total flux cleaned = 0.00212402 Jy ! Component: 150 - total flux cleaned = 0.00188178 Jy ! Component: 200 - total flux cleaned = 0.0018099 Jy ! Component: 250 - total flux cleaned = 0.00174071 Jy ! Component: 300 - total flux cleaned = 0.00154665 Jy ! Component: 350 - total flux cleaned = 0.00136013 Jy ! Component: 400 - total flux cleaned = 0.00118171 Jy ! Component: 450 - total flux cleaned = 0.0010685 Jy ! Component: 500 - total flux cleaned = 0.000959393 Jy ! Component: 550 - total flux cleaned = 0.000801955 Jy ! Component: 600 - total flux cleaned = 0.000699519 Jy ! Component: 650 - total flux cleaned = 0.000699537 Jy ! Component: 700 - total flux cleaned = 0.000601921 Jy ! Component: 750 - total flux cleaned = 0.000602512 Jy ! Component: 800 - total flux cleaned = 0.000742032 Jy ! Component: 850 - total flux cleaned = 0.000697178 Jy ! Component: 900 - total flux cleaned = 0.000876004 Jy ! Component: 950 - total flux cleaned = 0.000919974 Jy ! Component: 1000 - total flux cleaned = 0.00104899 Jy ! Component: 1050 - total flux cleaned = 0.00117689 Jy ! Component: 1100 - total flux cleaned = 0.00126066 Jy ! Component: 1150 - total flux cleaned = 0.001509 Jy ! Component: 1200 - total flux cleaned = 0.00155052 Jy ! Component: 1250 - total flux cleaned = 0.00171237 Jy ! Component: 1300 - total flux cleaned = 0.0017924 Jy ! Component: 1350 - total flux cleaned = 0.00191171 Jy ! Component: 1400 - total flux cleaned = 0.0019903 Jy ! Component: 1450 - total flux cleaned = 0.00210702 Jy ! Component: 1500 - total flux cleaned = 0.00218451 Jy ! Component: 1550 - total flux cleaned = 0.00226112 Jy ! Component: 1600 - total flux cleaned = 0.0023754 Jy ! Component: 1650 - total flux cleaned = 0.00245076 Jy ! Component: 1700 - total flux cleaned = 0.00245073 Jy ! Component: 1750 - total flux cleaned = 0.00252578 Jy ! Component: 1800 - total flux cleaned = 0.0025633 Jy ! Component: 1850 - total flux cleaned = 0.00271276 Jy ! Component: 1900 - total flux cleaned = 0.00282464 Jy ! Component: 1950 - total flux cleaned = 0.00289922 Jy ! Component: 2000 - total flux cleaned = 0.00297405 Jy ! Component: 2050 - total flux cleaned = 0.00304875 Jy ! Component: 2100 - total flux cleaned = 0.00308601 Jy ! Component: 2150 - total flux cleaned = 0.00323508 Jy ! Component: 2200 - total flux cleaned = 0.00330958 Jy ! Component: 2250 - total flux cleaned = 0.00338429 Jy ! Component: 2300 - total flux cleaned = 0.00349636 Jy ! Component: 2350 - total flux cleaned = 0.00353396 Jy ! Component: 2400 - total flux cleaned = 0.00368409 Jy ! Component: 2450 - total flux cleaned = 0.00375942 Jy ! Component: 2500 - total flux cleaned = 0.00387254 Jy ! Component: 2550 - total flux cleaned = 0.00391041 Jy ! Component: 2600 - total flux cleaned = 0.00402405 Jy ! Component: 2650 - total flux cleaned = 0.00406207 Jy ! Component: 2700 - total flux cleaned = 0.0041002 Jy ! Component: 2750 - total flux cleaned = 0.00413834 Jy ! Component: 2800 - total flux cleaned = 0.00425387 Jy ! Component: 2850 - total flux cleaned = 0.00429251 Jy ! Component: 2900 - total flux cleaned = 0.00437036 Jy ! Component: 2950 - total flux cleaned = 0.00437025 Jy ! Component: 3000 - total flux cleaned = 0.00448796 Jy ! Component: 3050 - total flux cleaned = 0.00460661 Jy ! Component: 3100 - total flux cleaned = 0.00460678 Jy ! Component: 3150 - total flux cleaned = 0.0047268 Jy ! Component: 3200 - total flux cleaned = 0.00480723 Jy ! Component: 3250 - total flux cleaned = 0.00496886 Jy ! Component: 3300 - total flux cleaned = 0.0050098 Jy ! Component: 3350 - total flux cleaned = 0.0049688 Jy ! Component: 3400 - total flux cleaned = 0.00505128 Jy ! Component: 3450 - total flux cleaned = 0.00505103 Jy ! Component: 3500 - total flux cleaned = 0.00509298 Jy ! Component: 3550 - total flux cleaned = 0.00513569 Jy ! Component: 3600 - total flux cleaned = 0.0051358 Jy ! Component: 3650 - total flux cleaned = 0.00513585 Jy ! Component: 3700 - total flux cleaned = 0.00513604 Jy ! Component: 3750 - total flux cleaned = 0.00513658 Jy ! Component: 3800 - total flux cleaned = 0.00513631 Jy ! Component: 3850 - total flux cleaned = 0.00518129 Jy ! Component: 3900 - total flux cleaned = 0.00513648 Jy ! Component: 3950 - total flux cleaned = 0.00509117 Jy ! Component: 4000 - total flux cleaned = 0.00513697 Jy ! Component: 4050 - total flux cleaned = 0.00513671 Jy ! Total flux subtracted in 4096 components = 0.00513658 Jy ! Clean residual min=-0.002477 max=0.002737 Jy/beam ! Clean residual mean=-0.000013 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.347748 Jy keep ! Adding 187 model components to the UV plane model. ! The established model now contains 334 components and 0.347748 Jy ![Exited script file: muppet] wmap "J0904-3514_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.004 x 16.08 at -26.03 degrees (North through East) ! Clean map min=-0.0096206 max=0.19659 Jy/beam ! Writing clean map to FITS file: J0904-3514_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.196593 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00080728 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.23191 1.23191 2.46382 4.92764 9.85527 19.7105 39.4211 78.8422 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0024 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.196 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.004 x 16.08 at -26.03 degrees (North through East) ! Clean map min=-0.0096206 max=0.19659 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0904-3514_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:08:27 2019