! Started logfile: J0904+2333_S_2017_10_09_pus_uvs.log on Sun May 12 13:08:16 2019 obs J0904+2333_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0904+2333_S_2017_10_09_pus_uva.fits ! AN table 1: 145 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.757854 visibilities/baseline/integration-bin. ! Found source: J0904+2333 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 15824 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0904+2333_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 280 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 162 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 745 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.915603Jy sigma=0.008392 ! Fit after self-cal, rms=0.904325Jy sigma=0.008295 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=8.055 mas, bpa=-23.5 degrees ! Estimated noise=1332.06 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0732533 Jy ! Component: 100 - total flux cleaned = 0.0935923 Jy ! Total flux subtracted in 100 components = 0.0935923 Jy ! Clean residual min=-0.005736 max=0.008845 Jy/beam ! Clean residual mean=-0.000038 rms=0.001705 Jy/beam ! Combined flux in latest and established models = 0.0935923 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0935923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083044Jy sigma=0.000692 ! Fit after self-cal, rms=0.082996Jy sigma=0.000691 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.631 mas, bmaj=8.418 mas, bpa=-22.52 degrees ! Estimated noise=723.848 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0101543 Jy ! Component: 100 - total flux cleaned = 0.0157889 Jy ! Component: 150 - total flux cleaned = 0.0185175 Jy ! Component: 200 - total flux cleaned = 0.0195146 Jy ! Total flux subtracted in 200 components = 0.0195146 Jy ! Clean residual min=-0.003973 max=0.005925 Jy/beam ! Clean residual mean=-0.000013 rms=0.001138 Jy/beam ! Combined flux in latest and established models = 0.113107 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 34 components and 0.113107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081543Jy sigma=0.000680 ! Fit after self-cal, rms=0.081520Jy sigma=0.000680 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.94 HN 1.01 KP 1.05 ! LA 1.03 MK 0.99 NL 0.89 OV 1.00* ! PT 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.31 FD 0.97 HN 1.05 KP 1.03 ! LA 0.94 MK 0.98 NL 1.38 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 1.02 KP 0.88 ! LA 0.80 MK 0.98 NL 1.12 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 0.94 KP 1.00* ! LA 1.00* MK 0.90 NL 1.00* OV 1.00* ! PT 1.03 ! ! ! Fit before self-cal, rms=0.081520Jy sigma=0.000680 ! Fit after self-cal, rms=0.079934Jy sigma=0.000671 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.614 mas, bmaj=8.577 mas, bpa=-22.41 degrees ! Estimated noise=718.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00206193 Jy ! Component: 100 - total flux cleaned = -0.00261071 Jy ! Component: 150 - total flux cleaned = -0.00287222 Jy ! Component: 200 - total flux cleaned = -0.00303845 Jy ! Total flux subtracted in 200 components = -0.00303845 Jy ! Clean residual min=-0.003240 max=0.003426 Jy/beam ! Clean residual mean=0.000003 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.110068 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.110068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079821Jy sigma=0.000670 ! Fit after self-cal, rms=0.079845Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079845Jy sigma=0.000670 ! Fit after self-cal, rms=0.081823Jy sigma=0.000663 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.612 mas, bmaj=8.634 mas, bpa=-22.24 degrees ! Estimated noise=718.628 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000699965 Jy ! Component: 100 - total flux cleaned = 0.000662528 Jy ! Component: 150 - total flux cleaned = 0.000662338 Jy ! Component: 200 - total flux cleaned = 0.000615711 Jy ! Total flux subtracted in 200 components = 0.000615711 Jy ! Clean residual min=-0.001496 max=0.001905 Jy/beam ! Clean residual mean=0.000004 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.110684 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 56 components and 0.110684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081796Jy sigma=0.000662 ! Fit after self-cal, rms=0.081927Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-32.5, -19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000635278 Jy ! Component: 100 - total flux cleaned = 0.000546632 Jy ! Component: 150 - total flux cleaned = 0.000368995 Jy ! Component: 200 - total flux cleaned = 0.000249173 Jy ! Total flux subtracted in 200 components = 0.000249173 Jy ! Clean residual min=-0.001416 max=0.001691 Jy/beam ! Clean residual mean=0.000004 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.110933 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 80 components and 0.110933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081873Jy sigma=0.000662 ! Fit after self-cal, rms=0.081871Jy sigma=0.000662 ! Inverting map ! Added new window around map position (53, -75). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153299 Jy ! Component: 100 - total flux cleaned = 0.0016935 Jy ! Component: 150 - total flux cleaned = 0.00172911 Jy ! Component: 200 - total flux cleaned = 0.00163906 Jy ! Total flux subtracted in 200 components = 0.00163906 Jy ! Clean residual min=-0.001293 max=0.001276 Jy/beam ! Clean residual mean=0.000003 rms=0.000347 Jy/beam ! Combined flux in latest and established models = 0.112572 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 104 components and 0.112572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081824Jy sigma=0.000661 ! Fit after self-cal, rms=0.081822Jy sigma=0.000661 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081822Jy sigma=0.000661 ! Fit after self-cal, rms=0.082079Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.605 mas, bmaj=8.634 mas, bpa=-22.24 degrees ! Estimated noise=717.006 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000812148 Jy ! Component: 100 - total flux cleaned = 0.000814268 Jy ! Component: 150 - total flux cleaned = 0.000839556 Jy ! Component: 200 - total flux cleaned = 0.000816419 Jy ! Total flux subtracted in 200 components = 0.000816419 Jy ! Clean residual min=-0.001289 max=0.001145 Jy/beam ! Clean residual mean=0.000002 rms=0.000318 Jy/beam ! Combined flux in latest and established models = 0.113389 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 123 components and 0.113389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082059Jy sigma=0.000661 ! Fit after self-cal, rms=0.082074Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000149805 Jy ! Component: 100 - total flux cleaned = 0.00017122 Jy ! Component: 150 - total flux cleaned = 0.000150736 Jy ! Component: 200 - total flux cleaned = 0.000131788 Jy ! Total flux subtracted in 200 components = 0.000131788 Jy ! Clean residual min=-0.001264 max=0.001155 Jy/beam ! Clean residual mean=0.000002 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.113521 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 135 components and 0.113521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082062Jy sigma=0.000661 ! Fit after self-cal, rms=0.082063Jy sigma=0.000661 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082063Jy sigma=0.000661 ! Fit after self-cal, rms=0.082069Jy sigma=0.000661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.913 mas, bmaj=10.27 mas, bpa=-21.56 degrees ! Estimated noise=866.219 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000515122 Jy ! Component: 100 - total flux cleaned = 0.000644945 Jy ! Component: 150 - total flux cleaned = 0.000692598 Jy ! Component: 200 - total flux cleaned = 0.000735043 Jy ! Total flux subtracted in 200 components = 0.000735043 Jy ! Clean residual min=-0.001364 max=0.001298 Jy/beam ! Clean residual mean=0.000004 rms=0.000377 Jy/beam ! Combined flux in latest and established models = 0.114256 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 157 components and 0.114256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082063Jy sigma=0.000661 ! Fit after self-cal, rms=0.082069Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000159799 Jy ! Component: 100 - total flux cleaned = 0.000172122 Jy ! Component: 150 - total flux cleaned = 0.000194799 Jy ! Component: 200 - total flux cleaned = 0.000184311 Jy ! Total flux subtracted in 200 components = 0.000184311 Jy ! Clean residual min=-0.001340 max=0.001254 Jy/beam ! Clean residual mean=0.000004 rms=0.000373 Jy/beam ! Combined flux in latest and established models = 0.11444 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 174 components and 0.11444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082066Jy sigma=0.000661 ! Fit after self-cal, rms=0.082067Jy sigma=0.000661 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.605 mas, bmaj=8.635 mas, bpa=-22.22 degrees ! Estimated noise=716.661 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.605 x 8.635 at -22.22 degrees (North through East) ! Clean map min=-0.0021308 max=0.095921 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.937 mas, bmaj=8.182 mas, bpa=-22.98 degrees ! Estimated noise=1314.06 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0716208 Jy ! Component: 100 - total flux cleaned = 0.0924857 Jy ! Component: 150 - total flux cleaned = 0.102189 Jy ! Component: 200 - total flux cleaned = 0.107306 Jy ! Total flux subtracted in 200 components = 0.107306 Jy ! Clean residual min=-0.003601 max=0.003714 Jy/beam ! Clean residual mean=-0.000003 rms=0.001031 Jy/beam ! Combined flux in latest and established models = 0.107306 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.107306 Jy ! Inverting map and beam ! Estimated beam: bmin=3.605 mas, bmaj=8.635 mas, bpa=-22.22 degrees ! Estimated noise=716.661 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307788 Jy ! Component: 100 - total flux cleaned = 0.00456686 Jy ! Component: 150 - total flux cleaned = 0.00527747 Jy ! Component: 200 - total flux cleaned = 0.00552122 Jy ! Total flux subtracted in 200 components = 0.00552122 Jy ! Clean residual min=-0.001557 max=0.001560 Jy/beam ! Clean residual mean=-0.000001 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.112827 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 55 components and 0.112827 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.913 mas, bmaj=10.27 mas, bpa=-21.56 degrees ! Estimated noise=866.219 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106663 Jy ! Component: 100 - total flux cleaned = 0.00124023 Jy ! Component: 150 - total flux cleaned = 0.0013144 Jy ! Component: 200 - total flux cleaned = 0.0014146 Jy ! Total flux subtracted in 200 components = 0.0014146 Jy ! Clean residual min=-0.001345 max=0.001306 Jy/beam ! Clean residual mean=0.000001 rms=0.000403 Jy/beam ! Combined flux in latest and established models = 0.114241 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.02164e-05 Jy ! Component: 100 - total flux cleaned = 3.10488e-05 Jy ! Component: 150 - total flux cleaned = 5.60843e-05 Jy ! Component: 200 - total flux cleaned = 5.61275e-05 Jy ! Total flux subtracted in 200 components = 5.61275e-05 Jy ! Clean residual min=-0.001350 max=0.001262 Jy/beam ! Clean residual mean=0.000001 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.114298 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 99 components and 0.114298 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.605 mas, bmaj=8.635 mas, bpa=-22.22 degrees ! Estimated noise=716.661 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000184552 Jy ! Component: 100 - total flux cleaned = 2.24217e-05 Jy ! Component: 150 - total flux cleaned = -6.6144e-05 Jy ! Component: 200 - total flux cleaned = -0.000121982 Jy ! Total flux subtracted in 200 components = -0.000121982 Jy ! Clean residual min=-0.001312 max=0.001234 Jy/beam ! Clean residual mean=0.000001 rms=0.000331 Jy/beam ! Combined flux in latest and established models = 0.114176 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 125 components and 0.114176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082104Jy sigma=0.000661 ! Fit after self-cal, rms=0.082108Jy sigma=0.000661 wmodel J0904+2333_S_2017_10_09_pus_map.mod ! Writing 125 model components to file: J0904+2333_S_2017_10_09_pus_map.mod wobs J0904+2333_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0904+2333_S_2017_10_09_pus_uvs.fits wwins J0904+2333_S_2017_10_09_pus_map.win ! wwins: Wrote 3 windows to J0904+2333_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125932 Jy ! Component: 100 - total flux cleaned = -0.000147655 Jy ! Component: 150 - total flux cleaned = -0.000147234 Jy ! Component: 200 - total flux cleaned = -0.000204731 Jy ! Component: 250 - total flux cleaned = -0.000259792 Jy ! Component: 300 - total flux cleaned = -0.000294932 Jy ! Component: 350 - total flux cleaned = -0.000312304 Jy ! Component: 400 - total flux cleaned = -0.000396081 Jy ! Component: 450 - total flux cleaned = -0.000476853 Jy ! Component: 500 - total flux cleaned = -0.000524029 Jy ! Component: 550 - total flux cleaned = -0.000555054 Jy ! Component: 600 - total flux cleaned = -0.000615629 Jy ! Component: 650 - total flux cleaned = -0.000689358 Jy ! Component: 700 - total flux cleaned = -0.000732309 Jy ! Component: 750 - total flux cleaned = -0.000816323 Jy ! Component: 800 - total flux cleaned = -0.000857898 Jy ! Component: 850 - total flux cleaned = -0.000966239 Jy ! Component: 900 - total flux cleaned = -0.00105919 Jy ! Component: 950 - total flux cleaned = -0.00115073 Jy ! Component: 1000 - total flux cleaned = -0.00125381 Jy ! Component: 1050 - total flux cleaned = -0.00136788 Jy ! Component: 1100 - total flux cleaned = -0.00144273 Jy ! Component: 1150 - total flux cleaned = -0.00151649 Jy ! Component: 1200 - total flux cleaned = -0.00156502 Jy ! Component: 1250 - total flux cleaned = -0.00166063 Jy ! Component: 1300 - total flux cleaned = -0.00167238 Jy ! Component: 1350 - total flux cleaned = -0.0017419 Jy ! Component: 1400 - total flux cleaned = -0.00176475 Jy ! Component: 1450 - total flux cleaned = -0.00174222 Jy ! Component: 1500 - total flux cleaned = -0.00178714 Jy ! Component: 1550 - total flux cleaned = -0.00184239 Jy ! Component: 1600 - total flux cleaned = -0.00183174 Jy ! Component: 1650 - total flux cleaned = -0.00186445 Jy ! Component: 1700 - total flux cleaned = -0.00184327 Jy ! Component: 1750 - total flux cleaned = -0.00187502 Jy ! Component: 1800 - total flux cleaned = -0.00185398 Jy ! Component: 1850 - total flux cleaned = -0.00186443 Jy ! Component: 1900 - total flux cleaned = -0.0018544 Jy ! Component: 1950 - total flux cleaned = -0.00186461 Jy ! Component: 2000 - total flux cleaned = -0.00186456 Jy ! Component: 2050 - total flux cleaned = -0.00182472 Jy ! Component: 2100 - total flux cleaned = -0.00185439 Jy ! Component: 2150 - total flux cleaned = -0.00184446 Jy ! Component: 2200 - total flux cleaned = -0.00179582 Jy ! Component: 2250 - total flux cleaned = -0.00179586 Jy ! Component: 2300 - total flux cleaned = -0.00175776 Jy ! Component: 2350 - total flux cleaned = -0.0017672 Jy ! Component: 2400 - total flux cleaned = -0.00173916 Jy ! Component: 2450 - total flux cleaned = -0.00172987 Jy ! Component: 2500 - total flux cleaned = -0.00168379 Jy ! Component: 2550 - total flux cleaned = -0.00166563 Jy ! Component: 2600 - total flux cleaned = -0.00164758 Jy ! Component: 2650 - total flux cleaned = -0.00162067 Jy ! Component: 2700 - total flux cleaned = -0.00157621 Jy ! Component: 2750 - total flux cleaned = -0.00157629 Jy ! Component: 2800 - total flux cleaned = -0.00154134 Jy ! Component: 2850 - total flux cleaned = -0.00155874 Jy ! Component: 2900 - total flux cleaned = -0.0015068 Jy ! Component: 2950 - total flux cleaned = -0.00148959 Jy ! Component: 3000 - total flux cleaned = -0.00144691 Jy ! Component: 3050 - total flux cleaned = -0.0014893 Jy ! Component: 3100 - total flux cleaned = -0.0014557 Jy ! Component: 3150 - total flux cleaned = -0.00145573 Jy ! Component: 3200 - total flux cleaned = -0.00146402 Jy ! Component: 3250 - total flux cleaned = -0.00145576 Jy ! Component: 3300 - total flux cleaned = -0.00142307 Jy ! Component: 3350 - total flux cleaned = -0.00144762 Jy ! Component: 3400 - total flux cleaned = -0.00143953 Jy ! Component: 3450 - total flux cleaned = -0.00140729 Jy ! Component: 3500 - total flux cleaned = -0.00141538 Jy ! Component: 3550 - total flux cleaned = -0.00140739 Jy ! Component: 3600 - total flux cleaned = -0.00139942 Jy ! Component: 3650 - total flux cleaned = -0.00142313 Jy ! Component: 3700 - total flux cleaned = -0.00139949 Jy ! Component: 3750 - total flux cleaned = -0.00137604 Jy ! Component: 3800 - total flux cleaned = -0.00138385 Jy ! Component: 3850 - total flux cleaned = -0.00141492 Jy ! Component: 3900 - total flux cleaned = -0.0014304 Jy ! Component: 3950 - total flux cleaned = -0.00145342 Jy ! Component: 4000 - total flux cleaned = -0.00142283 Jy ! Component: 4050 - total flux cleaned = -0.00143043 Jy ! Total flux subtracted in 4096 components = -0.00143039 Jy ! Clean residual min=-0.000413 max=0.000499 Jy/beam ! Clean residual mean=-0.000001 rms=0.000133 Jy/beam ! Combined flux in latest and established models = 0.112745 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 370 components and 0.112745 Jy ![Exited script file: muppet] wmap "J0904+2333_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.605 x 8.635 at -22.22 degrees (North through East) ! Clean map min=-0.0014005 max=0.095439 Jy/beam ! Writing clean map to FITS file: J0904+2333_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0954388 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000130366 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.40979 0.40979 0.81958 1.63916 3.27832 6.55664 13.1133 26.2265 52.4531 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.095 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.605 x 8.635 at -22.22 degrees (North through East) ! Clean map min=-0.0014005 max=0.095439 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0904+2333_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:08:21 2019