! Started logfile: J0903-3117_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:43:33 2019 obs J0903-3117_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0903-3117_S_2017_05_31_pus_uva.fits ! AN table 1: 116 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.742912 visibilities/baseline/integration-bin. ! Found source: J0903-3117 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 15512 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0903-3117_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 213 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 299 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 211 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 546 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.923534Jy sigma=0.006249 ! Fit after self-cal, rms=0.910526Jy sigma=0.006174 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.424 mas, bmaj=7.393 mas, bpa=-7.808 degrees ! Estimated noise=1818.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0671036 Jy ! Component: 100 - total flux cleaned = 0.0868137 Jy ! Total flux subtracted in 100 components = 0.0868137 Jy ! Clean residual min=-0.006248 max=0.009262 Jy/beam ! Clean residual mean=-0.000037 rms=0.001756 Jy/beam ! Combined flux in latest and established models = 0.0868137 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0868137 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107289Jy sigma=0.000665 ! Fit after self-cal, rms=0.107234Jy sigma=0.000665 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.046 mas, bmaj=8.955 mas, bpa=-7.963 degrees ! Estimated noise=1008.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0165019 Jy ! Component: 100 - total flux cleaned = 0.0237641 Jy ! Component: 150 - total flux cleaned = 0.0272072 Jy ! Component: 200 - total flux cleaned = 0.0289241 Jy ! Total flux subtracted in 200 components = 0.0289241 Jy ! Clean residual min=-0.003366 max=0.003203 Jy/beam ! Clean residual mean=-0.000028 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.115738 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 59 components and 0.115738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105135Jy sigma=0.000647 ! Fit after self-cal, rms=0.105162Jy sigma=0.000647 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.93 HN 1.40 KP 1.00 ! LA 0.98 MK 1.00 NL 0.95 OV 1.01 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.00* KP 0.96 ! LA 0.98 MK 1.02 NL 1.14 OV 0.99 ! PT 1.02 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.64 FD 1.03 HN 1.00* KP 0.94 ! LA 0.98 MK 1.05 NL 1.03 OV 0.98 ! PT 0.96 SC 0.96 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.95 KP 1.12 ! LA 0.89 MK 1.08 NL 1.00* OV 1.00* ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.105162Jy sigma=0.000647 ! Fit after self-cal, rms=0.113515Jy sigma=0.000644 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=8.992 mas, bpa=-7.717 degrees ! Estimated noise=1012.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.3522e-06 Jy ! Component: 100 - total flux cleaned = 8.56702e-06 Jy ! Component: 150 - total flux cleaned = 8.41951e-06 Jy ! Component: 200 - total flux cleaned = 7.37771e-06 Jy ! Total flux subtracted in 200 components = 7.37771e-06 Jy ! Clean residual min=-0.002893 max=0.002670 Jy/beam ! Clean residual mean=-0.000013 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.115745 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.115745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113507Jy sigma=0.000644 ! Fit after self-cal, rms=0.113739Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113739Jy sigma=0.000644 ! Fit after self-cal, rms=0.115355Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.086 mas, bmaj=8.987 mas, bpa=-7.642 degrees ! Estimated noise=1015.48 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000331923 Jy ! Component: 100 - total flux cleaned = 0.000351733 Jy ! Component: 150 - total flux cleaned = 0.000351748 Jy ! Component: 200 - total flux cleaned = 0.000351355 Jy ! Total flux subtracted in 200 components = 0.000351355 Jy ! Clean residual min=-0.002665 max=0.002407 Jy/beam ! Clean residual mean=-0.000008 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.116097 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 65 components and 0.116097 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115347Jy sigma=0.000644 ! Fit after self-cal, rms=0.115377Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.84114e-05 Jy ! Component: 100 - total flux cleaned = -5.11346e-05 Jy ! Component: 150 - total flux cleaned = -4.99992e-05 Jy ! Component: 200 - total flux cleaned = -4.97078e-05 Jy ! Total flux subtracted in 200 components = -4.97078e-05 Jy ! Clean residual min=-0.002643 max=0.002408 Jy/beam ! Clean residual mean=-0.000008 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.116047 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 66 components and 0.116047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115372Jy sigma=0.000644 ! Fit after self-cal, rms=0.115374Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115374Jy sigma=0.000644 ! Fit after self-cal, rms=0.115453Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.085 mas, bmaj=8.975 mas, bpa=-7.603 degrees ! Estimated noise=1014.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.96173e-05 Jy ! Component: 100 - total flux cleaned = -8.89545e-05 Jy ! Component: 150 - total flux cleaned = -0.000117684 Jy ! Component: 200 - total flux cleaned = -0.000118311 Jy ! Total flux subtracted in 200 components = -0.000118311 Jy ! Clean residual min=-0.002577 max=0.002384 Jy/beam ! Clean residual mean=0.000004 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.115929 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 66 components and 0.115929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115447Jy sigma=0.000643 ! Fit after self-cal, rms=0.115452Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.72957e-05 Jy ! Component: 100 - total flux cleaned = -6.08041e-05 Jy ! Component: 150 - total flux cleaned = -6.07827e-05 Jy ! Component: 200 - total flux cleaned = -6.13112e-05 Jy ! Total flux subtracted in 200 components = -6.13112e-05 Jy ! Clean residual min=-0.002562 max=0.002431 Jy/beam ! Clean residual mean=0.000003 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.115867 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 67 components and 0.115867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115448Jy sigma=0.000643 ! Fit after self-cal, rms=0.115449Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115449Jy sigma=0.000643 ! Fit after self-cal, rms=0.115469Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.977 mas, bmaj=26.84 mas, bpa=-1.099 degrees ! Estimated noise=1257.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146211 Jy ! Component: 100 - total flux cleaned = -0.000148622 Jy ! Component: 150 - total flux cleaned = -0.000149829 Jy ! Component: 200 - total flux cleaned = -0.000150617 Jy ! Total flux subtracted in 200 components = -0.000150617 Jy ! Clean residual min=-0.002353 max=0.003047 Jy/beam ! Clean residual mean=0.000008 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.115717 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 73 components and 0.115717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115476Jy sigma=0.000643 ! Fit after self-cal, rms=0.115474Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.25183e-05 Jy ! Component: 100 - total flux cleaned = -2.13384e-05 Jy ! Component: 150 - total flux cleaned = -2.04958e-05 Jy ! Component: 200 - total flux cleaned = -1.98679e-05 Jy ! Total flux subtracted in 200 components = -1.98679e-05 Jy ! Clean residual min=-0.002358 max=0.003042 Jy/beam ! Clean residual mean=0.000008 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.115697 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 75 components and 0.115697 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115481Jy sigma=0.000643 ! Fit after self-cal, rms=0.115476Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=8.957 mas, bpa=-7.533 degrees ! Estimated noise=1013.52 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.084 x 8.957 at -7.533 degrees (North through East) ! Clean map min=-0.0024562 max=0.092595 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.431 mas, bmaj=7.325 mas, bpa=-7.258 degrees ! Estimated noise=1897.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0680543 Jy ! Component: 100 - total flux cleaned = 0.0894667 Jy ! Component: 150 - total flux cleaned = 0.100924 Jy ! Component: 200 - total flux cleaned = 0.107389 Jy ! Total flux subtracted in 200 components = 0.107389 Jy ! Clean residual min=-0.004340 max=0.004336 Jy/beam ! Clean residual mean=-0.000004 rms=0.001117 Jy/beam ! Combined flux in latest and established models = 0.107389 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 33 model components to the UV plane model. ! The established model now contains 33 components and 0.107389 Jy ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=8.957 mas, bpa=-7.533 degrees ! Estimated noise=1013.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00498845 Jy ! Component: 100 - total flux cleaned = 0.00714134 Jy ! Component: 150 - total flux cleaned = 0.00793297 Jy ! Component: 200 - total flux cleaned = 0.00804237 Jy ! Total flux subtracted in 200 components = 0.00804237 Jy ! Clean residual min=-0.002549 max=0.002372 Jy/beam ! Clean residual mean=0.000003 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.115431 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 49 components and 0.115431 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.977 mas, bmaj=26.84 mas, bpa=-1.099 degrees ! Estimated noise=1257.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239839 Jy ! Component: 100 - total flux cleaned = 0.000242018 Jy ! Component: 150 - total flux cleaned = 0.000242676 Jy ! Component: 200 - total flux cleaned = 0.000241128 Jy ! Total flux subtracted in 200 components = 0.000241128 Jy ! Clean residual min=-0.002346 max=0.003038 Jy/beam ! Clean residual mean=0.000008 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.115672 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.57633e-07 Jy ! Component: 100 - total flux cleaned = -1.04225e-05 Jy ! Component: 150 - total flux cleaned = -1.10755e-05 Jy ! Component: 200 - total flux cleaned = -1.93616e-05 Jy ! Total flux subtracted in 200 components = -1.93616e-05 Jy ! Clean residual min=-0.002370 max=0.003025 Jy/beam ! Clean residual mean=0.000008 rms=0.000731 Jy/beam ! Combined flux in latest and established models = 0.115653 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 62 components and 0.115653 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.084 mas, bmaj=8.957 mas, bpa=-7.533 degrees ! Estimated noise=1013.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199854 Jy ! Component: 100 - total flux cleaned = -0.000216877 Jy ! Component: 150 - total flux cleaned = -0.000217751 Jy ! Component: 200 - total flux cleaned = -0.000201327 Jy ! Total flux subtracted in 200 components = -0.000201327 Jy ! Clean residual min=-0.002550 max=0.002429 Jy/beam ! Clean residual mean=0.000003 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.115452 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 67 components and 0.115452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115490Jy sigma=0.000643 ! Fit after self-cal, rms=0.115491Jy sigma=0.000643 wmodel J0903-3117_S_2017_05_31_pus_map.mod ! Writing 67 model components to file: J0903-3117_S_2017_05_31_pus_map.mod wobs J0903-3117_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0903-3117_S_2017_05_31_pus_uvs.fits wwins J0903-3117_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J0903-3117_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000522535 Jy ! Component: 100 - total flux cleaned = -0.000691119 Jy ! Component: 150 - total flux cleaned = -0.000969787 Jy ! Component: 200 - total flux cleaned = -0.00115976 Jy ! Component: 250 - total flux cleaned = -0.00123259 Jy ! Component: 300 - total flux cleaned = -0.00140947 Jy ! Component: 350 - total flux cleaned = -0.00161362 Jy ! Component: 400 - total flux cleaned = -0.00174719 Jy ! Component: 450 - total flux cleaned = -0.00200438 Jy ! Component: 500 - total flux cleaned = -0.00219096 Jy ! Component: 550 - total flux cleaned = -0.00240251 Jy ! Component: 600 - total flux cleaned = -0.00263965 Jy ! Component: 650 - total flux cleaned = -0.00304432 Jy ! Component: 700 - total flux cleaned = -0.00338266 Jy ! Component: 750 - total flux cleaned = -0.00363097 Jy ! Component: 800 - total flux cleaned = -0.00390159 Jy ! Component: 850 - total flux cleaned = -0.0041398 Jy ! Component: 900 - total flux cleaned = -0.00432147 Jy ! Component: 950 - total flux cleaned = -0.00444852 Jy ! Component: 1000 - total flux cleaned = -0.00462313 Jy ! Component: 1050 - total flux cleaned = -0.00472169 Jy ! Component: 1100 - total flux cleaned = -0.00489001 Jy ! Component: 1150 - total flux cleaned = -0.00503164 Jy ! Component: 1200 - total flux cleaned = -0.00514745 Jy ! Component: 1250 - total flux cleaned = -0.00519271 Jy ! Component: 1300 - total flux cleaned = -0.00519238 Jy ! Component: 1350 - total flux cleaned = -0.00532496 Jy ! Component: 1400 - total flux cleaned = -0.00530328 Jy ! Component: 1450 - total flux cleaned = -0.00534636 Jy ! Component: 1500 - total flux cleaned = -0.00541024 Jy ! Component: 1550 - total flux cleaned = -0.00543118 Jy ! Component: 1600 - total flux cleaned = -0.00538993 Jy ! Component: 1650 - total flux cleaned = -0.00536965 Jy ! Component: 1700 - total flux cleaned = -0.00538969 Jy ! Component: 1750 - total flux cleaned = -0.00529073 Jy ! Component: 1800 - total flux cleaned = -0.00531039 Jy ! Component: 1850 - total flux cleaned = -0.00527156 Jy ! Component: 1900 - total flux cleaned = -0.00525243 Jy ! Component: 1950 - total flux cleaned = -0.00523333 Jy ! Component: 2000 - total flux cleaned = -0.00523328 Jy ! Component: 2050 - total flux cleaned = -0.00517754 Jy ! Component: 2100 - total flux cleaned = -0.0051591 Jy ! Component: 2150 - total flux cleaned = -0.0052318 Jy ! Component: 2200 - total flux cleaned = -0.0051777 Jy ! Component: 2250 - total flux cleaned = -0.00517755 Jy ! Component: 2300 - total flux cleaned = -0.00521316 Jy ! Component: 2350 - total flux cleaned = -0.00523051 Jy ! Component: 2400 - total flux cleaned = -0.0052479 Jy ! Component: 2450 - total flux cleaned = -0.00524805 Jy ! Component: 2500 - total flux cleaned = -0.00523084 Jy ! Component: 2550 - total flux cleaned = -0.00521427 Jy ! Component: 2600 - total flux cleaned = -0.00526447 Jy ! Component: 2650 - total flux cleaned = -0.0052478 Jy ! Component: 2700 - total flux cleaned = -0.00524755 Jy ! Component: 2750 - total flux cleaned = -0.00519866 Jy ! Component: 2800 - total flux cleaned = -0.00524709 Jy ! Component: 2850 - total flux cleaned = -0.00531085 Jy ! Component: 2900 - total flux cleaned = -0.00527876 Jy ! Component: 2950 - total flux cleaned = -0.00524738 Jy ! Component: 3000 - total flux cleaned = -0.00526302 Jy ! Component: 3050 - total flux cleaned = -0.00521667 Jy ! Component: 3100 - total flux cleaned = -0.00530855 Jy ! Component: 3150 - total flux cleaned = -0.00526269 Jy ! Component: 3200 - total flux cleaned = -0.00529282 Jy ! Component: 3250 - total flux cleaned = -0.00526288 Jy ! Component: 3300 - total flux cleaned = -0.0052628 Jy ! Component: 3350 - total flux cleaned = -0.00526274 Jy ! Component: 3400 - total flux cleaned = -0.00521884 Jy ! Component: 3450 - total flux cleaned = -0.00517531 Jy ! Component: 3500 - total flux cleaned = -0.00516095 Jy ! Component: 3550 - total flux cleaned = -0.00513234 Jy ! Component: 3600 - total flux cleaned = -0.00508987 Jy ! Component: 3650 - total flux cleaned = -0.0051039 Jy ! Component: 3700 - total flux cleaned = -0.00504797 Jy ! Component: 3750 - total flux cleaned = -0.00506176 Jy ! Component: 3800 - total flux cleaned = -0.00503423 Jy ! Component: 3850 - total flux cleaned = -0.00504783 Jy ! Component: 3900 - total flux cleaned = -0.00496625 Jy ! Component: 3950 - total flux cleaned = -0.00493931 Jy ! Component: 4000 - total flux cleaned = -0.00488566 Jy ! Component: 4050 - total flux cleaned = -0.00485901 Jy ! Total flux subtracted in 4096 components = -0.00476621 Jy ! Clean residual min=-0.000757 max=0.000863 Jy/beam ! Clean residual mean=0.000005 rms=0.000245 Jy/beam ! Combined flux in latest and established models = 0.110685 Jy keep ! Adding 273 model components to the UV plane model. ! The established model now contains 340 components and 0.110685 Jy ![Exited script file: muppet] wmap "J0903-3117_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.084 x 8.957 at -7.533 degrees (North through East) ! Clean map min=-0.0024121 max=0.092555 Jy/beam ! Writing clean map to FITS file: J0903-3117_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0925551 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000244023 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.790956 0.790956 1.58191 3.16382 6.32765 12.6553 25.3106 50.6212 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.092 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.084 x 8.957 at -7.533 degrees (North through East) ! Clean map min=-0.0024121 max=0.092555 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0903-3117_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:43:39 2019