! Started logfile: J0901-0702_S_2017_03_23_pus_uvs.log on Mon May 13 09:55:01 2019 obs J0901-0702_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0901-0702_S_2017_03_23_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.948538 visibilities/baseline/integration-bin. ! Found source: J0901-0702 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 19464 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0901-0702_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 143 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 42 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 470 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.929457Jy sigma=0.007449 ! Fit after self-cal, rms=0.912370Jy sigma=0.007311 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.898 mas, bmaj=6.925 mas, bpa=-5.583 degrees ! Estimated noise=1025.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0615833 Jy ! Component: 100 - total flux cleaned = 0.081516 Jy ! Total flux subtracted in 100 components = 0.081516 Jy ! Clean residual min=-0.006982 max=0.009807 Jy/beam ! Clean residual mean=0.000030 rms=0.001820 Jy/beam ! Combined flux in latest and established models = 0.081516 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.081516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100284Jy sigma=0.000736 ! Fit after self-cal, rms=0.100176Jy sigma=0.000735 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.434 mas, bmaj=7.912 mas, bpa=-1.944 degrees ! Estimated noise=741.053 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170643 Jy ! Component: 100 - total flux cleaned = 0.025737 Jy ! Component: 150 - total flux cleaned = 0.0310171 Jy ! Component: 200 - total flux cleaned = 0.0342915 Jy ! Total flux subtracted in 200 components = 0.0342915 Jy ! Clean residual min=-0.004713 max=0.006762 Jy/beam ! Clean residual mean=0.000025 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 0.115808 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 39 components and 0.115808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096746Jy sigma=0.000716 ! Fit after self-cal, rms=0.096631Jy sigma=0.000715 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.41 FD 0.84 HN 0.91 KP 1.02 ! LA 1.07 MK 1.09 NL 0.90 OV 1.03 ! PT 1.03 SC 0.90 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.39 FD 0.93 HN 1.00 KP 0.97 ! LA 0.97 MK 1.03 NL 1.06 OV 1.06 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.95 HN 0.97 KP 0.88 ! LA 0.76 MK 1.20 NL 1.17 OV 0.95 ! PT 0.94 SC 0.95 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.31 FD 0.97 HN 0.99 KP 1.00* ! LA 0.76 MK 1.12 NL 1.00* OV 1.15 ! PT 0.96 SC 1.00* ! ! ! Fit before self-cal, rms=0.096631Jy sigma=0.000715 ! Fit after self-cal, rms=0.097454Jy sigma=0.000703 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.472 mas, bmaj=8.08 mas, bpa=-0.9852 degrees ! Estimated noise=750.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155503 Jy ! Component: 100 - total flux cleaned = 0.00155989 Jy ! Component: 150 - total flux cleaned = 0.00147327 Jy ! Component: 200 - total flux cleaned = 0.00139316 Jy ! Total flux subtracted in 200 components = 0.00139316 Jy ! Clean residual min=-0.004944 max=0.004810 Jy/beam ! Clean residual mean=0.000012 rms=0.001208 Jy/beam ! Combined flux in latest and established models = 0.117201 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 50 components and 0.117201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097357Jy sigma=0.000703 ! Fit after self-cal, rms=0.097421Jy sigma=0.000702 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097421Jy sigma=0.000702 ! Fit after self-cal, rms=0.107753Jy sigma=0.000690 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.447 mas, bmaj=8.181 mas, bpa=-1.512 degrees ! Estimated noise=760.166 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000502923 Jy ! Component: 100 - total flux cleaned = 0.000273024 Jy ! Component: 150 - total flux cleaned = 0.000211614 Jy ! Component: 200 - total flux cleaned = 0.000152352 Jy ! Total flux subtracted in 200 components = 0.000152352 Jy ! Clean residual min=-0.002817 max=0.003162 Jy/beam ! Clean residual mean=0.000005 rms=0.000715 Jy/beam ! Combined flux in latest and established models = 0.117353 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 59 components and 0.117353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107648Jy sigma=0.000690 ! Fit after self-cal, rms=0.108002Jy sigma=0.000689 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00194695 Jy ! Component: 100 - total flux cleaned = 0.00188127 Jy ! Component: 150 - total flux cleaned = 0.00176227 Jy ! Component: 200 - total flux cleaned = 0.00175925 Jy ! Total flux subtracted in 200 components = 0.00175925 Jy ! Clean residual min=-0.002566 max=0.002721 Jy/beam ! Clean residual mean=0.000007 rms=0.000672 Jy/beam ! Combined flux in latest and established models = 0.119112 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 78 components and 0.119112 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107888Jy sigma=0.000688 ! Fit after self-cal, rms=0.107853Jy sigma=0.000688 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107853Jy sigma=0.000688 ! Fit after self-cal, rms=0.112958Jy sigma=0.000686 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=8.131 mas, bpa=-1.881 degrees ! Estimated noise=751.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017923 Jy ! Component: 100 - total flux cleaned = 0.00194477 Jy ! Component: 150 - total flux cleaned = 0.0019855 Jy ! Component: 200 - total flux cleaned = 0.00198732 Jy ! Total flux subtracted in 200 components = 0.00198732 Jy ! Clean residual min=-0.002071 max=0.002250 Jy/beam ! Clean residual mean=0.000002 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.1211 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 96 components and 0.1211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112913Jy sigma=0.000685 ! Fit after self-cal, rms=0.113000Jy sigma=0.000685 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000347077 Jy ! Component: 100 - total flux cleaned = 0.000344635 Jy ! Component: 150 - total flux cleaned = 0.00031294 Jy ! Component: 200 - total flux cleaned = 0.000312968 Jy ! Total flux subtracted in 200 components = 0.000312968 Jy ! Clean residual min=-0.002078 max=0.002316 Jy/beam ! Clean residual mean=0.000003 rms=0.000543 Jy/beam ! Combined flux in latest and established models = 0.121413 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 104 components and 0.121413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112979Jy sigma=0.000685 ! Fit after self-cal, rms=0.112972Jy sigma=0.000685 ! Inverting map ! Added new window around map position (10.5, 81.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.001569 Jy ! Component: 100 - total flux cleaned = 0.00162834 Jy ! Component: 150 - total flux cleaned = 0.00158793 Jy ! Component: 200 - total flux cleaned = 0.0015875 Jy ! Total flux subtracted in 200 components = 0.0015875 Jy ! Clean residual min=-0.002031 max=0.001889 Jy/beam ! Clean residual mean=0.000004 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.123 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 127 components and 0.123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112917Jy sigma=0.000685 ! Fit after self-cal, rms=0.112924Jy sigma=0.000685 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112924Jy sigma=0.000685 ! Fit after self-cal, rms=0.111740Jy sigma=0.000684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.599 mas, bmaj=13.45 mas, bpa=0.9824 degrees ! Estimated noise=930.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000973507 Jy ! Component: 100 - total flux cleaned = 0.00109172 Jy ! Component: 150 - total flux cleaned = 0.00109398 Jy ! Component: 200 - total flux cleaned = 0.00106647 Jy ! Total flux subtracted in 200 components = 0.00106647 Jy ! Clean residual min=-0.002395 max=0.002182 Jy/beam ! Clean residual mean=0.000007 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.124067 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 146 components and 0.124067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111721Jy sigma=0.000684 ! Fit after self-cal, rms=0.111720Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000253241 Jy ! Component: 100 - total flux cleaned = 0.000255181 Jy ! Component: 150 - total flux cleaned = 0.000254604 Jy ! Component: 200 - total flux cleaned = 0.000232386 Jy ! Total flux subtracted in 200 components = 0.000232386 Jy ! Clean residual min=-0.002326 max=0.002202 Jy/beam ! Clean residual mean=0.000008 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.124299 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 159 components and 0.124299 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111711Jy sigma=0.000684 ! Fit after self-cal, rms=0.111710Jy sigma=0.000684 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=8.102 mas, bpa=-2.265 degrees ! Estimated noise=743.521 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.386 x 8.102 at -2.265 degrees (North through East) ! Clean map min=-0.0018523 max=0.085354 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.827 mas, bmaj=7.034 mas, bpa=-5.098 degrees ! Estimated noise=1068.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0636994 Jy ! Component: 100 - total flux cleaned = 0.0863601 Jy ! Component: 150 - total flux cleaned = 0.0976907 Jy ! Component: 200 - total flux cleaned = 0.104939 Jy ! Total flux subtracted in 200 components = 0.104939 Jy ! Clean residual min=-0.003266 max=0.004033 Jy/beam ! Clean residual mean=0.000009 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.104939 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.104939 Jy ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=8.102 mas, bpa=-2.265 degrees ! Estimated noise=743.521 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00731668 Jy ! Component: 100 - total flux cleaned = 0.0115577 Jy ! Component: 150 - total flux cleaned = 0.014509 Jy ! Component: 200 - total flux cleaned = 0.0162218 Jy ! Total flux subtracted in 200 components = 0.0162218 Jy ! Clean residual min=-0.002191 max=0.001973 Jy/beam ! Clean residual mean=0.000004 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.121161 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 67 components and 0.121161 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.599 mas, bmaj=13.45 mas, bpa=0.9824 degrees ! Estimated noise=930.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00215836 Jy ! Component: 100 - total flux cleaned = 0.00270743 Jy ! Component: 150 - total flux cleaned = 0.00283946 Jy ! Component: 200 - total flux cleaned = 0.00287862 Jy ! Total flux subtracted in 200 components = 0.00287862 Jy ! Clean residual min=-0.002516 max=0.002211 Jy/beam ! Clean residual mean=0.000008 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.124039 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.34523e-05 Jy ! Component: 100 - total flux cleaned = 3.24574e-05 Jy ! Component: 150 - total flux cleaned = 5.95956e-05 Jy ! Component: 200 - total flux cleaned = 5.90283e-05 Jy ! Total flux subtracted in 200 components = 5.90283e-05 Jy ! Clean residual min=-0.002413 max=0.002181 Jy/beam ! Clean residual mean=0.000008 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.124099 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 105 components and 0.124099 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=8.102 mas, bpa=-2.265 degrees ! Estimated noise=743.521 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000270455 Jy ! Component: 100 - total flux cleaned = -0.000123241 Jy ! Component: 150 - total flux cleaned = -8.00375e-05 Jy ! Component: 200 - total flux cleaned = -0.000116575 Jy ! Total flux subtracted in 200 components = -0.000116575 Jy ! Clean residual min=-0.001881 max=0.001826 Jy/beam ! Clean residual mean=0.000004 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 0.123982 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 127 components and 0.123982 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111735Jy sigma=0.000684 ! Fit after self-cal, rms=0.111735Jy sigma=0.000684 wmodel J0901-0702_S_2017_03_23_pus_map.mod ! Writing 127 model components to file: J0901-0702_S_2017_03_23_pus_map.mod wobs J0901-0702_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0901-0702_S_2017_03_23_pus_uvs.fits wwins J0901-0702_S_2017_03_23_pus_map.win ! wwins: Wrote 3 windows to J0901-0702_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00041454 Jy ! Component: 100 - total flux cleaned = -0.000705887 Jy ! Component: 150 - total flux cleaned = -0.000862359 Jy ! Component: 200 - total flux cleaned = -0.00104427 Jy ! Component: 250 - total flux cleaned = -0.00116273 Jy ! Component: 300 - total flux cleaned = -0.0013646 Jy ! Component: 350 - total flux cleaned = -0.00153347 Jy ! Component: 400 - total flux cleaned = -0.00164396 Jy ! Component: 450 - total flux cleaned = -0.00180648 Jy ! Component: 500 - total flux cleaned = -0.00191301 Jy ! Component: 550 - total flux cleaned = -0.00207002 Jy ! Component: 600 - total flux cleaned = -0.00219947 Jy ! Component: 650 - total flux cleaned = -0.00225038 Jy ! Component: 700 - total flux cleaned = -0.00237663 Jy ! Component: 750 - total flux cleaned = -0.00259997 Jy ! Component: 800 - total flux cleaned = -0.00262438 Jy ! Component: 850 - total flux cleaned = -0.00276985 Jy ! Component: 900 - total flux cleaned = -0.00288904 Jy ! Component: 950 - total flux cleaned = -0.00298347 Jy ! Component: 1000 - total flux cleaned = -0.00310075 Jy ! Component: 1050 - total flux cleaned = -0.00319333 Jy ! Component: 1100 - total flux cleaned = -0.00335296 Jy ! Component: 1150 - total flux cleaned = -0.00348821 Jy ! Component: 1200 - total flux cleaned = -0.00348814 Jy ! Component: 1250 - total flux cleaned = -0.00357671 Jy ! Component: 1300 - total flux cleaned = -0.0036643 Jy ! Component: 1350 - total flux cleaned = -0.00370774 Jy ! Component: 1400 - total flux cleaned = -0.0037509 Jy ! Component: 1450 - total flux cleaned = -0.0038575 Jy ! Component: 1500 - total flux cleaned = -0.00396334 Jy ! Component: 1550 - total flux cleaned = -0.00406785 Jy ! Component: 1600 - total flux cleaned = -0.00419274 Jy ! Component: 1650 - total flux cleaned = -0.00425447 Jy ! Component: 1700 - total flux cleaned = -0.00433602 Jy ! Component: 1750 - total flux cleaned = -0.00437669 Jy ! Component: 1800 - total flux cleaned = -0.00449766 Jy ! Component: 1850 - total flux cleaned = -0.00455764 Jy ! Component: 1900 - total flux cleaned = -0.00469635 Jy ! Component: 1950 - total flux cleaned = -0.00485348 Jy ! Component: 2000 - total flux cleaned = -0.00483389 Jy ! Component: 2050 - total flux cleaned = -0.00495038 Jy ! Component: 2100 - total flux cleaned = -0.00508503 Jy ! Component: 2150 - total flux cleaned = -0.00516125 Jy ! Component: 2200 - total flux cleaned = -0.00521792 Jy ! Component: 2250 - total flux cleaned = -0.00529313 Jy ! Component: 2300 - total flux cleaned = -0.00536812 Jy ! Component: 2350 - total flux cleaned = -0.00544238 Jy ! Component: 2400 - total flux cleaned = -0.00557137 Jy ! Component: 2450 - total flux cleaned = -0.00560808 Jy ! Component: 2500 - total flux cleaned = -0.00568092 Jy ! Component: 2550 - total flux cleaned = -0.00578924 Jy ! Component: 2600 - total flux cleaned = -0.00584303 Jy ! Component: 2650 - total flux cleaned = -0.00587865 Jy ! Component: 2700 - total flux cleaned = -0.00605555 Jy ! Component: 2750 - total flux cleaned = -0.00609049 Jy ! Component: 2800 - total flux cleaned = -0.00614296 Jy ! Component: 2850 - total flux cleaned = -0.00628156 Jy ! Component: 2900 - total flux cleaned = -0.00635033 Jy ! Component: 2950 - total flux cleaned = -0.00635015 Jy ! Component: 3000 - total flux cleaned = -0.00640097 Jy ! Component: 3050 - total flux cleaned = -0.0064179 Jy ! Component: 3100 - total flux cleaned = -0.00650185 Jy ! Component: 3150 - total flux cleaned = -0.00651842 Jy ! Component: 3200 - total flux cleaned = -0.00661792 Jy ! Component: 3250 - total flux cleaned = -0.0066509 Jy ! Component: 3300 - total flux cleaned = -0.00668368 Jy ! Component: 3350 - total flux cleaned = -0.00673255 Jy ! Component: 3400 - total flux cleaned = -0.00678094 Jy ! Component: 3450 - total flux cleaned = -0.00682921 Jy ! Component: 3500 - total flux cleaned = -0.00684527 Jy ! Component: 3550 - total flux cleaned = -0.00690879 Jy ! Component: 3600 - total flux cleaned = -0.00689297 Jy ! Component: 3650 - total flux cleaned = -0.00698734 Jy ! Component: 3700 - total flux cleaned = -0.00708115 Jy ! Component: 3750 - total flux cleaned = -0.00703448 Jy ! Component: 3800 - total flux cleaned = -0.00711179 Jy ! Component: 3850 - total flux cleaned = -0.00718861 Jy ! Component: 3900 - total flux cleaned = -0.00720396 Jy ! Component: 3950 - total flux cleaned = -0.00731035 Jy ! Component: 4000 - total flux cleaned = -0.00735568 Jy ! Component: 4050 - total flux cleaned = -0.00743082 Jy ! Total flux subtracted in 4096 components = -0.00749057 Jy ! Clean residual min=-0.000915 max=0.000827 Jy/beam ! Clean residual mean=0.000003 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.116491 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 405 components and 0.116491 Jy ![Exited script file: muppet] wmap "J0901-0702_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.386 x 8.102 at -2.265 degrees (North through East) ! Clean map min=-0.0018084 max=0.085597 Jy/beam ! Writing clean map to FITS file: J0901-0702_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0855967 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000281411 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.986291 0.986291 1.97258 3.94517 7.89033 15.7807 31.5613 63.1227 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.085 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.386 x 8.102 at -2.265 degrees (North through East) ! Clean map min=-0.0018084 max=0.085597 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0901-0702_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:55:07 2019