! Started logfile: J0900-1242_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:09:40 2019 obs J0900-1242_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0900-1242_S_2017_01_16_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.717544 visibilities/baseline/integration-bin. ! Found source: J0900-1242 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 14724 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0900-1242_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 169 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 308 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.960307Jy sigma=0.006992 ! Fit after self-cal, rms=0.929094Jy sigma=0.006822 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.146 mas, bmaj=10.09 mas, bpa=16.89 degrees ! Estimated noise=1449.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0582619 Jy ! Component: 100 - total flux cleaned = 0.071 Jy ! Total flux subtracted in 100 components = 0.071 Jy ! Clean residual min=-0.003994 max=0.004291 Jy/beam ! Clean residual mean=-0.000024 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.071 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133750Jy sigma=0.000662 ! Fit after self-cal, rms=0.133557Jy sigma=0.000660 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.901 mas, bmaj=11.37 mas, bpa=15.65 degrees ! Estimated noise=851.528 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00627067 Jy ! Component: 100 - total flux cleaned = 0.0104042 Jy ! Component: 150 - total flux cleaned = 0.0133997 Jy ! Component: 200 - total flux cleaned = 0.0156846 Jy ! Total flux subtracted in 200 components = 0.0156846 Jy ! Clean residual min=-0.002445 max=0.002874 Jy/beam ! Clean residual mean=-0.000009 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.0866845 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 53 components and 0.0866845 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133006Jy sigma=0.000657 ! Fit after self-cal, rms=0.133024Jy sigma=0.000657 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.91 HN 1.01 KP 0.99 ! LA 1.01 MK 1.00* NL 0.92 OV 1.02 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.01 HN 1.10 KP 0.98 ! LA 0.97 MK 1.00* NL 1.10 OV 1.09 ! PT 0.92 SC 1.09 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 1.05 KP 1.02 ! LA 1.01 MK 1.00* NL 1.01 OV 1.04 ! PT 0.99 SC 1.10 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.03 HN 0.88 KP 0.49 ! LA 0.91 MK 1.00* NL 1.00* OV 0.97 ! PT 0.97 SC 0.71 ! ! ! Fit before self-cal, rms=0.133024Jy sigma=0.000657 ! Fit after self-cal, rms=0.099782Jy sigma=0.000653 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.935 mas, bmaj=11.44 mas, bpa=15.46 degrees ! Estimated noise=843.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148477 Jy ! Component: 100 - total flux cleaned = 0.00201699 Jy ! Component: 150 - total flux cleaned = 0.00229475 Jy ! Component: 200 - total flux cleaned = 0.00239406 Jy ! Total flux subtracted in 200 components = 0.00239406 Jy ! Clean residual min=-0.002587 max=0.002237 Jy/beam ! Clean residual mean=-0.000000 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0890786 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 76 components and 0.0890786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099752Jy sigma=0.000653 ! Fit after self-cal, rms=0.099426Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099426Jy sigma=0.000652 ! Fit after self-cal, rms=0.097998Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.928 mas, bmaj=11.4 mas, bpa=15.44 degrees ! Estimated noise=845.237 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000843368 Jy ! Component: 100 - total flux cleaned = 0.00118315 Jy ! Component: 150 - total flux cleaned = 0.00125021 Jy ! Component: 200 - total flux cleaned = 0.00129147 Jy ! Total flux subtracted in 200 components = 0.00129147 Jy ! Clean residual min=-0.002302 max=0.002027 Jy/beam ! Clean residual mean=0.000000 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.09037 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 90 components and 0.09037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097984Jy sigma=0.000652 ! Fit after self-cal, rms=0.097922Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000187403 Jy ! Component: 100 - total flux cleaned = 0.000188248 Jy ! Component: 150 - total flux cleaned = 0.000225382 Jy ! Component: 200 - total flux cleaned = 0.000225773 Jy ! Total flux subtracted in 200 components = 0.000225773 Jy ! Clean residual min=-0.002246 max=0.001962 Jy/beam ! Clean residual mean=0.000001 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 0.0905958 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 98 components and 0.0905958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097914Jy sigma=0.000652 ! Fit after self-cal, rms=0.097913Jy sigma=0.000652 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097913Jy sigma=0.000652 ! Fit after self-cal, rms=0.097243Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.927 mas, bmaj=11.37 mas, bpa=15.4 degrees ! Estimated noise=844.653 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000570875 Jy ! Component: 100 - total flux cleaned = 0.000678744 Jy ! Component: 150 - total flux cleaned = 0.000679359 Jy ! Component: 200 - total flux cleaned = 0.000680184 Jy ! Total flux subtracted in 200 components = 0.000680184 Jy ! Clean residual min=-0.002164 max=0.001838 Jy/beam ! Clean residual mean=-0.000004 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.091276 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 104 components and 0.091276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097234Jy sigma=0.000651 ! Fit after self-cal, rms=0.097221Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.99193e-05 Jy ! Component: 100 - total flux cleaned = 6.75328e-05 Jy ! Component: 150 - total flux cleaned = 6.72346e-05 Jy ! Component: 200 - total flux cleaned = 5.1589e-05 Jy ! Total flux subtracted in 200 components = 5.1589e-05 Jy ! Clean residual min=-0.002157 max=0.001868 Jy/beam ! Clean residual mean=-0.000003 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0913276 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 104 components and 0.0913276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097215Jy sigma=0.000651 ! Fit after self-cal, rms=0.097216Jy sigma=0.000651 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097216Jy sigma=0.000651 ! Fit after self-cal, rms=0.097196Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.737 mas, bmaj=15.03 mas, bpa=6.266 degrees ! Estimated noise=984.283 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00066391 Jy ! Component: 100 - total flux cleaned = 0.00110123 Jy ! Component: 150 - total flux cleaned = 0.00118166 Jy ! Component: 200 - total flux cleaned = 0.00124144 Jy ! Total flux subtracted in 200 components = 0.00124144 Jy ! Clean residual min=-0.002098 max=0.002315 Jy/beam ! Clean residual mean=-0.000008 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.092569 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 117 components and 0.092569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097193Jy sigma=0.000651 ! Fit after self-cal, rms=0.097194Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000220431 Jy ! Component: 100 - total flux cleaned = 0.00024608 Jy ! Component: 150 - total flux cleaned = 0.00027888 Jy ! Component: 200 - total flux cleaned = 0.000298917 Jy ! Total flux subtracted in 200 components = 0.000298917 Jy ! Clean residual min=-0.002081 max=0.002343 Jy/beam ! Clean residual mean=-0.000008 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0928679 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 129 components and 0.0928679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097194Jy sigma=0.000651 ! Fit after self-cal, rms=0.097194Jy sigma=0.000651 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.927 mas, bmaj=11.35 mas, bpa=15.38 degrees ! Estimated noise=844.93 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.927 x 11.35 at 15.38 degrees (North through East) ! Clean map min=-0.002018 max=0.072413 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=10.04 mas, bpa=16.57 degrees ! Estimated noise=1420.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0573411 Jy ! Component: 100 - total flux cleaned = 0.0700186 Jy ! Component: 150 - total flux cleaned = 0.0756436 Jy ! Component: 200 - total flux cleaned = 0.0798133 Jy ! Total flux subtracted in 200 components = 0.0798133 Jy ! Clean residual min=-0.003241 max=0.003566 Jy/beam ! Clean residual mean=-0.000015 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.0798133 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.0798133 Jy ! Inverting map and beam ! Estimated beam: bmin=3.927 mas, bmaj=11.35 mas, bpa=15.38 degrees ! Estimated noise=844.93 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041717 Jy ! Component: 100 - total flux cleaned = 0.0067672 Jy ! Component: 150 - total flux cleaned = 0.00864675 Jy ! Component: 200 - total flux cleaned = 0.0100865 Jy ! Total flux subtracted in 200 components = 0.0100865 Jy ! Clean residual min=-0.002104 max=0.001860 Jy/beam ! Clean residual mean=-0.000008 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.0898999 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 46 components and 0.0898999 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.737 mas, bmaj=15.03 mas, bpa=6.266 degrees ! Estimated noise=984.283 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139647 Jy ! Component: 100 - total flux cleaned = 0.00200057 Jy ! Component: 150 - total flux cleaned = 0.00233737 Jy ! Component: 200 - total flux cleaned = 0.0025549 Jy ! Total flux subtracted in 200 components = 0.0025549 Jy ! Clean residual min=-0.002135 max=0.002399 Jy/beam ! Clean residual mean=-0.000009 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.0924548 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000114054 Jy ! Component: 100 - total flux cleaned = 0.000215734 Jy ! Component: 150 - total flux cleaned = 0.000306608 Jy ! Component: 200 - total flux cleaned = 0.000388116 Jy ! Total flux subtracted in 200 components = 0.000388116 Jy ! Clean residual min=-0.002102 max=0.002403 Jy/beam ! Clean residual mean=-0.000008 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.0928429 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 87 components and 0.0928429 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.927 mas, bmaj=11.35 mas, bpa=15.38 degrees ! Estimated noise=844.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00056434 Jy ! Component: 100 - total flux cleaned = -0.000698055 Jy ! Component: 150 - total flux cleaned = -0.000721464 Jy ! Component: 200 - total flux cleaned = -0.000721461 Jy ! Total flux subtracted in 200 components = -0.000721461 Jy ! Clean residual min=-0.002096 max=0.001900 Jy/beam ! Clean residual mean=-0.000005 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0921214 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 99 components and 0.0921214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097204Jy sigma=0.000651 ! Fit after self-cal, rms=0.097199Jy sigma=0.000651 wmodel J0900-1242_S_2017_01_16_pus_map.mod ! Writing 99 model components to file: J0900-1242_S_2017_01_16_pus_map.mod wobs J0900-1242_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0900-1242_S_2017_01_16_pus_uvs.fits wwins J0900-1242_S_2017_01_16_pus_map.win ! wwins: Wrote 2 windows to J0900-1242_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000496948 Jy ! Component: 100 - total flux cleaned = -0.000564948 Jy ! Component: 150 - total flux cleaned = -0.000564189 Jy ! Component: 200 - total flux cleaned = -0.000502158 Jy ! Component: 250 - total flux cleaned = -0.000710548 Jy ! Component: 300 - total flux cleaned = -0.000825586 Jy ! Component: 350 - total flux cleaned = -0.000853687 Jy ! Component: 400 - total flux cleaned = -0.000935805 Jy ! Component: 450 - total flux cleaned = -0.00101576 Jy ! Component: 500 - total flux cleaned = -0.00106762 Jy ! Component: 550 - total flux cleaned = -0.00106759 Jy ! Component: 600 - total flux cleaned = -0.00106771 Jy ! Component: 650 - total flux cleaned = -0.00109222 Jy ! Component: 700 - total flux cleaned = -0.00114014 Jy ! Component: 750 - total flux cleaned = -0.0011165 Jy ! Component: 800 - total flux cleaned = -0.00114035 Jy ! Component: 850 - total flux cleaned = -0.00123187 Jy ! Component: 900 - total flux cleaned = -0.00123244 Jy ! Component: 950 - total flux cleaned = -0.00132094 Jy ! Component: 1000 - total flux cleaned = -0.00129852 Jy ! Component: 1050 - total flux cleaned = -0.00132014 Jy ! Component: 1100 - total flux cleaned = -0.00127796 Jy ! Component: 1150 - total flux cleaned = -0.00129874 Jy ! Component: 1200 - total flux cleaned = -0.00121679 Jy ! Component: 1250 - total flux cleaned = -0.00121702 Jy ! Component: 1300 - total flux cleaned = -0.0011373 Jy ! Component: 1350 - total flux cleaned = -0.00105821 Jy ! Component: 1400 - total flux cleaned = -0.000960131 Jy ! Component: 1450 - total flux cleaned = -0.000824786 Jy ! Component: 1500 - total flux cleaned = -0.000767566 Jy ! Component: 1550 - total flux cleaned = -0.000672777 Jy ! Component: 1600 - total flux cleaned = -0.000560228 Jy ! Component: 1650 - total flux cleaned = -0.000430296 Jy ! Component: 1700 - total flux cleaned = -0.000448781 Jy ! Component: 1750 - total flux cleaned = -0.000466993 Jy ! Component: 1800 - total flux cleaned = -0.000358262 Jy ! Component: 1850 - total flux cleaned = -0.000322315 Jy ! Component: 1900 - total flux cleaned = -0.000286825 Jy ! Component: 1950 - total flux cleaned = -0.000286727 Jy ! Component: 2000 - total flux cleaned = -0.000199409 Jy ! Component: 2050 - total flux cleaned = -0.000233916 Jy ! Component: 2100 - total flux cleaned = -0.000165296 Jy ! Component: 2150 - total flux cleaned = -0.000148285 Jy ! Component: 2200 - total flux cleaned = -0.000148496 Jy ! Component: 2250 - total flux cleaned = -0.000215561 Jy ! Component: 2300 - total flux cleaned = -0.000149295 Jy ! Component: 2350 - total flux cleaned = -0.000116315 Jy ! Component: 2400 - total flux cleaned = -0.000116352 Jy ! Component: 2450 - total flux cleaned = -8.39391e-05 Jy ! Component: 2500 - total flux cleaned = -8.39922e-05 Jy ! Component: 2550 - total flux cleaned = -3.61761e-05 Jy ! Component: 2600 - total flux cleaned = -6.79726e-05 Jy ! Component: 2650 - total flux cleaned = -3.63069e-05 Jy ! Component: 2700 - total flux cleaned = -5.22104e-05 Jy ! Component: 2750 - total flux cleaned = -5.20694e-05 Jy ! Component: 2800 - total flux cleaned = -5.21677e-05 Jy ! Component: 2850 - total flux cleaned = -3.70898e-05 Jy ! Component: 2900 - total flux cleaned = -3.71601e-05 Jy ! Component: 2950 - total flux cleaned = -5.20306e-05 Jy ! Component: 3000 - total flux cleaned = -7.01299e-06 Jy ! Component: 3050 - total flux cleaned = 8.05809e-06 Jy ! Component: 3100 - total flux cleaned = 7.97128e-06 Jy ! Component: 3150 - total flux cleaned = 3.74435e-05 Jy ! Component: 3200 - total flux cleaned = 5.20117e-05 Jy ! Component: 3250 - total flux cleaned = 2.29819e-05 Jy ! Component: 3300 - total flux cleaned = 6.63714e-05 Jy ! Component: 3350 - total flux cleaned = 0.000123503 Jy ! Component: 3400 - total flux cleaned = 6.66263e-05 Jy ! Component: 3450 - total flux cleaned = 0.000151449 Jy ! Component: 3500 - total flux cleaned = 0.000193592 Jy ! Component: 3550 - total flux cleaned = 0.000179606 Jy ! Component: 3600 - total flux cleaned = 0.000221368 Jy ! Component: 3650 - total flux cleaned = 0.000235176 Jy ! Component: 3700 - total flux cleaned = 0.000276196 Jy ! Component: 3750 - total flux cleaned = 0.000235243 Jy ! Component: 3800 - total flux cleaned = 0.000262393 Jy ! Component: 3850 - total flux cleaned = 0.000262333 Jy ! Component: 3900 - total flux cleaned = 0.000262297 Jy ! Component: 3950 - total flux cleaned = 0.000328835 Jy ! Component: 4000 - total flux cleaned = 0.00031568 Jy ! Component: 4050 - total flux cleaned = 0.000355083 Jy ! Total flux subtracted in 4096 components = 0.000394471 Jy ! Clean residual min=-0.000758 max=0.000778 Jy/beam ! Clean residual mean=0.000001 rms=0.000258 Jy/beam ! Combined flux in latest and established models = 0.0925159 Jy keep ! Adding 297 model components to the UV plane model. ! The established model now contains 396 components and 0.0925159 Jy ![Exited script file: muppet] wmap "J0900-1242_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.927 x 11.35 at 15.38 degrees (North through East) ! Clean map min=-0.0015835 max=0.072499 Jy/beam ! Writing clean map to FITS file: J0900-1242_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0724991 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000253504 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.04899 1.04899 2.09799 4.19598 8.39196 16.7839 33.5678 67.1357 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.072 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.927 x 11.35 at 15.38 degrees (North through East) ! Clean map min=-0.0015835 max=0.072499 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0900-1242_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:09:46 2019