! Started logfile: J0856-1105_S_2017_06_10_pus_uvs.log on Mon May 6 14:49:16 2019 obs J0856-1105_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0856-1105_S_2017_06_10_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.546667 visibilities/baseline/integration-bin. ! Found source: J0856-1105 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0856-1105_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.751800Jy sigma=0.005912 ! Fit after self-cal, rms=0.740546Jy sigma=0.005822 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.202 mas, bmaj=21.74 mas, bpa=-31.71 degrees ! Estimated noise=4558.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.20236 Jy ! Component: 100 - total flux cleaned = 0.255153 Jy ! Total flux subtracted in 100 components = 0.255153 Jy ! Clean residual min=-0.015178 max=0.020898 Jy/beam ! Clean residual mean=-0.000215 rms=0.005370 Jy/beam ! Combined flux in latest and established models = 0.255153 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.255153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092293Jy sigma=0.000695 ! Fit after self-cal, rms=0.092337Jy sigma=0.000695 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.182 mas, bmaj=24.18 mas, bpa=-30.57 degrees ! Estimated noise=3592.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0233898 Jy ! Component: 100 - total flux cleaned = 0.0325084 Jy ! Component: 150 - total flux cleaned = 0.0358269 Jy ! Component: 200 - total flux cleaned = 0.0374477 Jy ! Total flux subtracted in 200 components = 0.0374477 Jy ! Clean residual min=-0.009307 max=0.009860 Jy/beam ! Clean residual mean=-0.000022 rms=0.002935 Jy/beam ! Combined flux in latest and established models = 0.292601 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 65 components and 0.292601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087246Jy sigma=0.000648 ! Fit after self-cal, rms=0.087282Jy sigma=0.000648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.90 HN 1.00* KP 1.01 ! LA 1.02 MK 1.00* NL 0.94 OV 1.01 ! PT 1.02 SC 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 1.02 ! LA 1.00 MK 1.01 NL 1.08 OV 1.01 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 1.00* KP 1.00 ! LA 0.96 MK 0.98 NL 1.00 OV 0.95 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 1.00* ! LA 1.09 MK 1.03 NL 1.00* OV 1.00* ! PT 0.97 SC 1.00* ! ! ! Fit before self-cal, rms=0.087282Jy sigma=0.000648 ! Fit after self-cal, rms=0.086142Jy sigma=0.000639 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.19 mas, bmaj=23.91 mas, bpa=-30.62 degrees ! Estimated noise=3597.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000567513 Jy ! Component: 100 - total flux cleaned = -0.000569513 Jy ! Component: 150 - total flux cleaned = -0.000358182 Jy ! Component: 200 - total flux cleaned = -0.000453187 Jy ! Total flux subtracted in 200 components = -0.000453187 Jy ! Clean residual min=-0.008322 max=0.009877 Jy/beam ! Clean residual mean=0.000032 rms=0.002501 Jy/beam ! Combined flux in latest and established models = 0.292148 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 86 components and 0.292148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085791Jy sigma=0.000636 ! Fit after self-cal, rms=0.085806Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085806Jy sigma=0.000636 ! Fit after self-cal, rms=0.085339Jy sigma=0.000636 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.18 mas, bmaj=23.88 mas, bpa=-30.62 degrees ! Estimated noise=3576.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00112703 Jy ! Component: 100 - total flux cleaned = -0.00103796 Jy ! Component: 150 - total flux cleaned = -0.00119847 Jy ! Component: 200 - total flux cleaned = -0.00126928 Jy ! Total flux subtracted in 200 components = -0.00126928 Jy ! Clean residual min=-0.007746 max=0.009305 Jy/beam ! Clean residual mean=0.000035 rms=0.002360 Jy/beam ! Combined flux in latest and established models = 0.290879 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 98 components and 0.290879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085137Jy sigma=0.000634 ! Fit after self-cal, rms=0.085130Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000231659 Jy ! Component: 100 - total flux cleaned = -0.000228702 Jy ! Component: 150 - total flux cleaned = -0.000162701 Jy ! Component: 200 - total flux cleaned = -0.000226798 Jy ! Total flux subtracted in 200 components = -0.000226798 Jy ! Clean residual min=-0.007427 max=0.009077 Jy/beam ! Clean residual mean=0.000037 rms=0.002319 Jy/beam ! Combined flux in latest and established models = 0.290652 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 114 components and 0.290652 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085023Jy sigma=0.000634 ! Fit after self-cal, rms=0.085018Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085018Jy sigma=0.000634 ! Fit after self-cal, rms=0.084844Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.179 mas, bmaj=23.87 mas, bpa=-30.61 degrees ! Estimated noise=3562.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0012235 Jy ! Component: 100 - total flux cleaned = -0.00122298 Jy ! Component: 150 - total flux cleaned = -0.00134302 Jy ! Component: 200 - total flux cleaned = -0.0014551 Jy ! Total flux subtracted in 200 components = -0.0014551 Jy ! Clean residual min=-0.007024 max=0.008627 Jy/beam ! Clean residual mean=0.000039 rms=0.002231 Jy/beam ! Combined flux in latest and established models = 0.289197 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 121 components and 0.289197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084730Jy sigma=0.000633 ! Fit after self-cal, rms=0.084725Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000192839 Jy ! Component: 100 - total flux cleaned = -0.00024515 Jy ! Component: 150 - total flux cleaned = -0.000293678 Jy ! Component: 200 - total flux cleaned = -0.000293915 Jy ! Total flux subtracted in 200 components = -0.000293915 Jy ! Clean residual min=-0.006783 max=0.008540 Jy/beam ! Clean residual mean=0.000041 rms=0.002211 Jy/beam ! Combined flux in latest and established models = 0.288903 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 128 components and 0.288903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084661Jy sigma=0.000632 ! Fit after self-cal, rms=0.084655Jy sigma=0.000632 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084655Jy sigma=0.000632 ! Fit after self-cal, rms=0.084597Jy sigma=0.000632 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.465 mas, bmaj=24.15 mas, bpa=-24.55 degrees ! Estimated noise=3765.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000503002 Jy ! Component: 100 - total flux cleaned = -0.000449619 Jy ! Component: 150 - total flux cleaned = -0.000494357 Jy ! Component: 200 - total flux cleaned = -0.000612833 Jy ! Total flux subtracted in 200 components = -0.000612833 Jy ! Clean residual min=-0.006990 max=0.009195 Jy/beam ! Clean residual mean=0.000057 rms=0.002522 Jy/beam ! Combined flux in latest and established models = 0.28829 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 148 components and 0.28829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084546Jy sigma=0.000632 ! Fit after self-cal, rms=0.084543Jy sigma=0.000632 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000211688 Jy ! Component: 100 - total flux cleaned = -0.000284668 Jy ! Component: 150 - total flux cleaned = -0.000424691 Jy ! Component: 200 - total flux cleaned = -0.000558408 Jy ! Total flux subtracted in 200 components = -0.000558408 Jy ! Clean residual min=-0.006871 max=0.009140 Jy/beam ! Clean residual mean=0.000059 rms=0.002505 Jy/beam ! Combined flux in latest and established models = 0.287732 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 162 components and 0.287732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084520Jy sigma=0.000632 ! Fit after self-cal, rms=0.084516Jy sigma=0.000632 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.181 mas, bmaj=23.87 mas, bpa=-30.6 degrees ! Estimated noise=3552.61 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.181 x 23.87 at -30.6 degrees (North through East) ! Clean map min=-0.013948 max=0.26285 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.222 mas, bmaj=21.63 mas, bpa=-31.68 degrees ! Estimated noise=4492.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.198558 Jy ! Component: 100 - total flux cleaned = 0.249866 Jy ! Component: 150 - total flux cleaned = 0.270376 Jy ! Component: 200 - total flux cleaned = 0.279638 Jy ! Total flux subtracted in 200 components = 0.279638 Jy ! Clean residual min=-0.011646 max=0.012646 Jy/beam ! Clean residual mean=-0.000074 rms=0.003355 Jy/beam ! Combined flux in latest and established models = 0.279638 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 47 model components to the UV plane model. ! The established model now contains 47 components and 0.279638 Jy ! Inverting map and beam ! Estimated beam: bmin=5.181 mas, bmaj=23.87 mas, bpa=-30.6 degrees ! Estimated noise=3552.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00531448 Jy ! Component: 100 - total flux cleaned = 0.0061832 Jy ! Component: 150 - total flux cleaned = 0.00672871 Jy ! Component: 200 - total flux cleaned = 0.00703539 Jy ! Total flux subtracted in 200 components = 0.00703539 Jy ! Clean residual min=-0.008705 max=0.009000 Jy/beam ! Clean residual mean=0.000021 rms=0.002479 Jy/beam ! Combined flux in latest and established models = 0.286673 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 84 components and 0.286673 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.465 mas, bmaj=24.15 mas, bpa=-24.55 degrees ! Estimated noise=3765.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00191477 Jy ! Component: 100 - total flux cleaned = 0.0019229 Jy ! Component: 150 - total flux cleaned = 0.00203231 Jy ! Component: 200 - total flux cleaned = 0.0020362 Jy ! Total flux subtracted in 200 components = 0.0020362 Jy ! Clean residual min=-0.008285 max=0.009122 Jy/beam ! Clean residual mean=0.000046 rms=0.002630 Jy/beam ! Combined flux in latest and established models = 0.288709 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.33148e-05 Jy ! Component: 100 - total flux cleaned = 1.30521e-05 Jy ! Component: 150 - total flux cleaned = -0.000123889 Jy ! Component: 200 - total flux cleaned = -0.000253789 Jy ! Total flux subtracted in 200 components = -0.000253789 Jy ! Clean residual min=-0.007791 max=0.009151 Jy/beam ! Clean residual mean=0.000051 rms=0.002589 Jy/beam ! Combined flux in latest and established models = 0.288455 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 122 components and 0.288456 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.181 mas, bmaj=23.87 mas, bpa=-30.6 degrees ! Estimated noise=3552.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000607963 Jy ! Component: 100 - total flux cleaned = -0.00105841 Jy ! Component: 150 - total flux cleaned = -0.00120077 Jy ! Component: 200 - total flux cleaned = -0.00126578 Jy ! Total flux subtracted in 200 components = -0.00126578 Jy ! Clean residual min=-0.007078 max=0.008706 Jy/beam ! Clean residual mean=0.000043 rms=0.002236 Jy/beam ! Combined flux in latest and established models = 0.28719 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 138 components and 0.28719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084707Jy sigma=0.000633 ! Fit after self-cal, rms=0.084694Jy sigma=0.000633 wmodel J0856-1105_S_2017_06_10_pus_map.mod ! Writing 138 model components to file: J0856-1105_S_2017_06_10_pus_map.mod wobs J0856-1105_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0856-1105_S_2017_06_10_pus_uvs.fits wwins J0856-1105_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J0856-1105_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00358664 Jy ! Component: 100 - total flux cleaned = 0.00483723 Jy ! Component: 150 - total flux cleaned = 0.00505214 Jy ! Component: 200 - total flux cleaned = 0.00505362 Jy ! Component: 250 - total flux cleaned = 0.00469834 Jy ! Component: 300 - total flux cleaned = 0.00435656 Jy ! Component: 350 - total flux cleaned = 0.00387595 Jy ! Component: 400 - total flux cleaned = 0.003348 Jy ! Component: 450 - total flux cleaned = 0.0028428 Jy ! Component: 500 - total flux cleaned = 0.00215235 Jy ! Component: 550 - total flux cleaned = 0.00161977 Jy ! Component: 600 - total flux cleaned = 0.00129785 Jy ! Component: 650 - total flux cleaned = 0.00111124 Jy ! Component: 700 - total flux cleaned = 0.0011119 Jy ! Component: 750 - total flux cleaned = 0.00105212 Jy ! Component: 800 - total flux cleaned = 0.000936304 Jy ! Component: 850 - total flux cleaned = 0.000992687 Jy ! Component: 900 - total flux cleaned = 0.000936952 Jy ! Component: 950 - total flux cleaned = 0.000883232 Jy ! Component: 1000 - total flux cleaned = 0.000727421 Jy ! Component: 1050 - total flux cleaned = 0.000473278 Jy ! Component: 1100 - total flux cleaned = 0.000122647 Jy ! Component: 1150 - total flux cleaned = -0.000123506 Jy ! Component: 1200 - total flux cleaned = -0.000560564 Jy ! Component: 1250 - total flux cleaned = -0.000800241 Jy ! Component: 1300 - total flux cleaned = -0.00118031 Jy ! Component: 1350 - total flux cleaned = -0.00155629 Jy ! Component: 1400 - total flux cleaned = -0.0016495 Jy ! Component: 1450 - total flux cleaned = -0.00169601 Jy ! Component: 1500 - total flux cleaned = -0.00187975 Jy ! Component: 1550 - total flux cleaned = -0.00192527 Jy ! Component: 1600 - total flux cleaned = -0.00197088 Jy ! Component: 1650 - total flux cleaned = -0.00210618 Jy ! Component: 1700 - total flux cleaned = -0.00219584 Jy ! Component: 1750 - total flux cleaned = -0.00201726 Jy ! Component: 1800 - total flux cleaned = -0.00192781 Jy ! Component: 1850 - total flux cleaned = -0.0017486 Jy ! Component: 1900 - total flux cleaned = -0.00161379 Jy ! Component: 1950 - total flux cleaned = -0.00156875 Jy ! Component: 2000 - total flux cleaned = -0.00143247 Jy ! Component: 2050 - total flux cleaned = -0.00138638 Jy ! Component: 2100 - total flux cleaned = -0.00129415 Jy ! Component: 2150 - total flux cleaned = -0.00129413 Jy ! Component: 2200 - total flux cleaned = -0.00120054 Jy ! Component: 2250 - total flux cleaned = -0.00120016 Jy ! Component: 2300 - total flux cleaned = -0.00119987 Jy ! Component: 2350 - total flux cleaned = -0.00119958 Jy ! Component: 2400 - total flux cleaned = -0.00110163 Jy ! Component: 2450 - total flux cleaned = -0.00110146 Jy ! Component: 2500 - total flux cleaned = -0.0011503 Jy ! Component: 2550 - total flux cleaned = -0.00109993 Jy ! Component: 2600 - total flux cleaned = -0.00104913 Jy ! Component: 2650 - total flux cleaned = -0.000997013 Jy ! Component: 2700 - total flux cleaned = -0.000944195 Jy ! Component: 2750 - total flux cleaned = -0.000891775 Jy ! Component: 2800 - total flux cleaned = -0.000891494 Jy ! Component: 2850 - total flux cleaned = -0.000945833 Jy ! Component: 2900 - total flux cleaned = -0.0010001 Jy ! Component: 2950 - total flux cleaned = -0.00105608 Jy ! Component: 3000 - total flux cleaned = -0.00105582 Jy ! Component: 3050 - total flux cleaned = -0.00111266 Jy ! Component: 3100 - total flux cleaned = -0.00117004 Jy ! Component: 3150 - total flux cleaned = -0.00122911 Jy ! Component: 3200 - total flux cleaned = -0.00117087 Jy ! Component: 3250 - total flux cleaned = -0.00111078 Jy ! Component: 3300 - total flux cleaned = -0.00111089 Jy ! Component: 3350 - total flux cleaned = -0.00111022 Jy ! Component: 3400 - total flux cleaned = -0.00111041 Jy ! Component: 3450 - total flux cleaned = -0.00111052 Jy ! Component: 3500 - total flux cleaned = -0.00104616 Jy ! Component: 3550 - total flux cleaned = -0.000979999 Jy ! Component: 3600 - total flux cleaned = -0.00111346 Jy ! Component: 3650 - total flux cleaned = -0.00118127 Jy ! Component: 3700 - total flux cleaned = -0.00125099 Jy ! Component: 3750 - total flux cleaned = -0.00132085 Jy ! Component: 3800 - total flux cleaned = -0.00139239 Jy ! Component: 3850 - total flux cleaned = -0.00146429 Jy ! Component: 3900 - total flux cleaned = -0.00153889 Jy ! Component: 3950 - total flux cleaned = -0.00161426 Jy ! Component: 4000 - total flux cleaned = -0.00184307 Jy ! Component: 4050 - total flux cleaned = -0.00192025 Jy ! Total flux subtracted in 4096 components = -0.00207767 Jy ! Clean residual min=-0.004267 max=0.004064 Jy/beam ! Clean residual mean=-0.000023 rms=0.001416 Jy/beam ! Combined flux in latest and established models = 0.285112 Jy keep ! Adding 230 model components to the UV plane model. ! The established model now contains 368 components and 0.285112 Jy ![Exited script file: muppet] wmap "J0856-1105_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.181 x 23.87 at -30.6 degrees (North through East) ! Clean map min=-0.0098099 max=0.26331 Jy/beam ! Writing clean map to FITS file: J0856-1105_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.263308 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00182192 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.0758 2.0758 4.1516 8.3032 16.6064 33.2128 66.4256 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0054 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.263 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.181 x 23.87 at -30.6 degrees (North through East) ! Clean map min=-0.0098099 max=0.26331 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0856-1105_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:49:20 2019