! Started logfile: J0856-1105_S_2017_05_01_pus_uvs.log on Wed May 1 18:32:43 2019 obs J0856-1105_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0856-1105_S_2017_05_01_pus_uva.fits ! AN table 1: 29 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.789272 visibilities/baseline/integration-bin. ! Found source: J0856-1105 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 4120 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0856-1105_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 34 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 137 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.682678Jy sigma=0.033740 ! Fit after self-cal, rms=0.679193Jy sigma=0.033725 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=7.84 mas, bpa=-7.294 degrees ! Estimated noise=1301.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.161217 Jy ! Component: 100 - total flux cleaned = 0.20307 Jy ! Total flux subtracted in 100 components = 0.20307 Jy ! Clean residual min=-0.064149 max=0.062802 Jy/beam ! Clean residual mean=0.000019 rms=0.018748 Jy/beam ! Combined flux in latest and established models = 0.20307 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.20307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184901Jy sigma=0.006541 ! Fit after self-cal, rms=0.184870Jy sigma=0.006541 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.701 mas, bmaj=9.66 mas, bpa=-5.806 degrees ! Estimated noise=991.807 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00873854 Jy ! Component: 100 - total flux cleaned = -0.0126768 Jy ! Component: 150 - total flux cleaned = -0.0152265 Jy ! Component: 200 - total flux cleaned = -0.0180032 Jy ! Total flux subtracted in 200 components = -0.0180032 Jy ! Clean residual min=-0.057624 max=0.067604 Jy/beam ! Clean residual mean=-0.000208 rms=0.018756 Jy/beam ! Combined flux in latest and established models = 0.185067 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 12 components and 0.185067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.183819Jy sigma=0.006310 ! Fit after self-cal, rms=0.183795Jy sigma=0.006310 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.73 FD 0.59 HN 0.87 KP 0.74 ! LA 0.69 MK 0.95 NL 0.75 OV 0.75 ! PT 0.73 SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.62 HN 0.91 KP 0.73 ! LA 0.67 MK 0.95 NL 0.81 OV 0.78 ! PT 0.69 SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.66 HN 0.93 KP 0.75 ! LA 0.68 MK 0.97 NL 0.85 OV 0.69 ! PT 0.70 SC 0.94 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.79 HN 0.92 KP 1.00* ! LA 26.78 MK 1.03 NL 1.00* OV 1.00* ! PT 0.74 SC 1.00* ! ! ! Fit before self-cal, rms=0.183795Jy sigma=0.006310 ! Fit after self-cal, rms=1.047446Jy sigma=0.000750 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.658 mas, bmaj=8.948 mas, bpa=-2.965 degrees ! Estimated noise=983.868 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.5, 10). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00655285 Jy ! Component: 100 - total flux cleaned = 0.00896746 Jy ! Component: 150 - total flux cleaned = 0.00916874 Jy ! Component: 200 - total flux cleaned = 0.00925164 Jy ! Total flux subtracted in 200 components = 0.00925164 Jy ! Clean residual min=-0.004738 max=0.004875 Jy/beam ! Clean residual mean=0.000014 rms=0.001164 Jy/beam ! Combined flux in latest and established models = 0.194319 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 0.194319 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.046974Jy sigma=0.000744 ! Fit after self-cal, rms=1.047174Jy sigma=0.000732 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.047174Jy sigma=0.000732 ! Fit after self-cal, rms=1.040977Jy sigma=0.000712 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.624 mas, bmaj=8.895 mas, bpa=-3.264 degrees ! Estimated noise=992.927 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395283 Jy ! Component: 100 - total flux cleaned = 0.00552854 Jy ! Component: 150 - total flux cleaned = 0.0061308 Jy ! Component: 200 - total flux cleaned = 0.00629618 Jy ! Total flux subtracted in 200 components = 0.00629618 Jy ! Clean residual min=-0.003304 max=0.003709 Jy/beam ! Clean residual mean=0.000011 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.200615 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 45 components and 0.200615 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.040597Jy sigma=0.000711 ! Fit after self-cal, rms=1.040668Jy sigma=0.000710 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.75397e-05 Jy ! Component: 100 - total flux cleaned = -1.99748e-05 Jy ! Component: 150 - total flux cleaned = -1.81786e-05 Jy ! Component: 200 - total flux cleaned = 2.47002e-05 Jy ! Total flux subtracted in 200 components = 2.47002e-05 Jy ! Clean residual min=-0.003235 max=0.003680 Jy/beam ! Clean residual mean=0.000011 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.20064 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 60 components and 0.20064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.040651Jy sigma=0.000710 ! Fit after self-cal, rms=1.040655Jy sigma=0.000710 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.040655Jy sigma=0.000710 ! Fit after self-cal, rms=0.059045Jy sigma=0.000666 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.608 mas, bmaj=8.88 mas, bpa=-3.43 degrees ! Estimated noise=991.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104812 Jy ! Component: 100 - total flux cleaned = 0.00137517 Jy ! Component: 150 - total flux cleaned = 0.00142215 Jy ! Component: 200 - total flux cleaned = 0.00142383 Jy ! Total flux subtracted in 200 components = 0.00142383 Jy ! Clean residual min=-0.002625 max=0.003034 Jy/beam ! Clean residual mean=0.000011 rms=0.000687 Jy/beam ! Combined flux in latest and established models = 0.202064 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 68 components and 0.202064 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058951Jy sigma=0.000665 ! Fit after self-cal, rms=0.058850Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-116.5, 76). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00290496 Jy ! Component: 100 - total flux cleaned = 0.00358883 Jy ! Component: 150 - total flux cleaned = 0.00379552 Jy ! Component: 200 - total flux cleaned = 0.00411784 Jy ! Total flux subtracted in 200 components = 0.00411784 Jy ! Clean residual min=-0.002502 max=0.002527 Jy/beam ! Clean residual mean=0.000009 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.206181 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 91 components and 0.206181 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058671Jy sigma=0.000663 ! Fit after self-cal, rms=0.058665Jy sigma=0.000663 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058665Jy sigma=0.000663 ! Fit after self-cal, rms=0.058546Jy sigma=0.000662 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.308 mas, bmaj=15.21 mas, bpa=5.503 degrees ! Estimated noise=1140.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132965 Jy ! Component: 100 - total flux cleaned = 0.0016716 Jy ! Component: 150 - total flux cleaned = 0.00189223 Jy ! Component: 200 - total flux cleaned = 0.00200347 Jy ! Total flux subtracted in 200 components = 0.00200347 Jy ! Clean residual min=-0.002848 max=0.002514 Jy/beam ! Clean residual mean=0.000014 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.208185 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 102 components and 0.208185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058516Jy sigma=0.000662 ! Fit after self-cal, rms=0.058508Jy sigma=0.000662 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.735e-05 Jy ! Component: 100 - total flux cleaned = 0.000103969 Jy ! Component: 150 - total flux cleaned = 0.000126616 Jy ! Component: 200 - total flux cleaned = 0.000147877 Jy ! Total flux subtracted in 200 components = 0.000147877 Jy ! Clean residual min=-0.002810 max=0.002500 Jy/beam ! Clean residual mean=0.000013 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.208333 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 121 components and 0.208333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058506Jy sigma=0.000662 ! Fit after self-cal, rms=0.058502Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.601 mas, bmaj=8.873 mas, bpa=-3.513 degrees ! Estimated noise=991.61 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.601 x 8.873 at -3.513 degrees (North through East) ! Clean map min=-0.0046797 max=0.20716 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.874 mas, bmaj=7.3 mas, bpa=-4.261 degrees ! Estimated noise=1263.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.156704 Jy ! Component: 100 - total flux cleaned = 0.19254 Jy ! Component: 150 - total flux cleaned = 0.205338 Jy ! Component: 200 - total flux cleaned = 0.207158 Jy ! Total flux subtracted in 200 components = 0.207158 Jy ! Clean residual min=-0.004339 max=0.004296 Jy/beam ! Clean residual mean=0.000002 rms=0.001087 Jy/beam ! Combined flux in latest and established models = 0.207158 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.207158 Jy ! Inverting map and beam ! Estimated beam: bmin=3.601 mas, bmaj=8.873 mas, bpa=-3.513 degrees ! Estimated noise=991.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000670583 Jy ! Component: 100 - total flux cleaned = 0.000920643 Jy ! Component: 150 - total flux cleaned = 0.00112762 Jy ! Component: 200 - total flux cleaned = 0.00131023 Jy ! Total flux subtracted in 200 components = 0.00131023 Jy ! Clean residual min=-0.003098 max=0.002798 Jy/beam ! Clean residual mean=0.000008 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.208468 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 29 components and 0.208468 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.308 mas, bmaj=15.21 mas, bpa=5.503 degrees ! Estimated noise=1140.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000199607 Jy ! Component: 100 - total flux cleaned = 0.000306934 Jy ! Component: 150 - total flux cleaned = 0.000399392 Jy ! Component: 200 - total flux cleaned = 0.000443363 Jy ! Total flux subtracted in 200 components = 0.000443363 Jy ! Clean residual min=-0.002967 max=0.002341 Jy/beam ! Clean residual mean=0.000012 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.208912 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.88717e-05 Jy ! Component: 100 - total flux cleaned = 7.92539e-05 Jy ! Component: 150 - total flux cleaned = 0.000114256 Jy ! Component: 200 - total flux cleaned = 0.000146017 Jy ! Total flux subtracted in 200 components = 0.000146017 Jy ! Clean residual min=-0.002920 max=0.002288 Jy/beam ! Clean residual mean=0.000012 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.209058 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 54 components and 0.209058 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.601 mas, bmaj=8.873 mas, bpa=-3.513 degrees ! Estimated noise=991.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.11857e-06 Jy ! Component: 100 - total flux cleaned = 7.48445e-05 Jy ! Component: 150 - total flux cleaned = 8.1827e-06 Jy ! Component: 200 - total flux cleaned = -5.29507e-05 Jy ! Total flux subtracted in 200 components = -5.29507e-05 Jy ! Clean residual min=-0.002888 max=0.002609 Jy/beam ! Clean residual mean=0.000007 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.209005 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 67 components and 0.209005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058755Jy sigma=0.000664 ! Fit after self-cal, rms=0.058743Jy sigma=0.000664 wmodel J0856-1105_S_2017_05_01_pus_map.mod ! Writing 67 model components to file: J0856-1105_S_2017_05_01_pus_map.mod wobs J0856-1105_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0856-1105_S_2017_05_01_pus_uvs.fits wwins J0856-1105_S_2017_05_01_pus_map.win ! wwins: Wrote 3 windows to J0856-1105_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000490661 Jy ! Component: 100 - total flux cleaned = -0.000757823 Jy ! Component: 150 - total flux cleaned = -0.00101133 Jy ! Component: 200 - total flux cleaned = -0.00101186 Jy ! Component: 250 - total flux cleaned = -0.00105143 Jy ! Component: 300 - total flux cleaned = -0.00108932 Jy ! Component: 350 - total flux cleaned = -0.00112629 Jy ! Component: 400 - total flux cleaned = -0.00112598 Jy ! Component: 450 - total flux cleaned = -0.0011972 Jy ! Component: 500 - total flux cleaned = -0.0012316 Jy ! Component: 550 - total flux cleaned = -0.00126533 Jy ! Component: 600 - total flux cleaned = -0.00146623 Jy ! Component: 650 - total flux cleaned = -0.00166428 Jy ! Component: 700 - total flux cleaned = -0.00182648 Jy ! Component: 750 - total flux cleaned = -0.00201841 Jy ! Component: 800 - total flux cleaned = -0.00217622 Jy ! Component: 850 - total flux cleaned = -0.00245532 Jy ! Component: 900 - total flux cleaned = -0.00257808 Jy ! Component: 950 - total flux cleaned = -0.00282041 Jy ! Component: 1000 - total flux cleaned = -0.00297007 Jy ! Component: 1050 - total flux cleaned = -0.00308837 Jy ! Component: 1100 - total flux cleaned = -0.00335142 Jy ! Component: 1150 - total flux cleaned = -0.00355335 Jy ! Component: 1200 - total flux cleaned = -0.00378131 Jy ! Component: 1250 - total flux cleaned = -0.00389452 Jy ! Component: 1300 - total flux cleaned = -0.00420165 Jy ! Component: 1350 - total flux cleaned = -0.00434038 Jy ! Component: 1400 - total flux cleaned = -0.00461442 Jy ! Component: 1450 - total flux cleaned = -0.00480447 Jy ! Component: 1500 - total flux cleaned = -0.00499247 Jy ! Component: 1550 - total flux cleaned = -0.00517875 Jy ! Component: 1600 - total flux cleaned = -0.00544185 Jy ! Component: 1650 - total flux cleaned = -0.00557264 Jy ! Component: 1700 - total flux cleaned = -0.00577928 Jy ! Component: 1750 - total flux cleaned = -0.00598394 Jy ! Component: 1800 - total flux cleaned = -0.00608531 Jy ! Component: 1850 - total flux cleaned = -0.00623643 Jy ! Component: 1900 - total flux cleaned = -0.00638584 Jy ! Component: 1950 - total flux cleaned = -0.00663251 Jy ! Component: 2000 - total flux cleaned = -0.00680323 Jy ! Component: 2050 - total flux cleaned = -0.00685144 Jy ! Component: 2100 - total flux cleaned = -0.00704327 Jy ! Component: 2150 - total flux cleaned = -0.00711413 Jy ! Component: 2200 - total flux cleaned = -0.0072086 Jy ! Component: 2250 - total flux cleaned = -0.00741877 Jy ! Component: 2300 - total flux cleaned = -0.0074882 Jy ! Component: 2350 - total flux cleaned = -0.00753419 Jy ! Component: 2400 - total flux cleaned = -0.00762538 Jy ! Component: 2450 - total flux cleaned = -0.00771566 Jy ! Component: 2500 - total flux cleaned = -0.00787234 Jy ! Component: 2550 - total flux cleaned = -0.00796121 Jy ! Component: 2600 - total flux cleaned = -0.00809333 Jy ! Component: 2650 - total flux cleaned = -0.00815884 Jy ! Component: 2700 - total flux cleaned = -0.00826727 Jy ! Component: 2750 - total flux cleaned = -0.00831057 Jy ! Component: 2800 - total flux cleaned = -0.0085246 Jy ! Component: 2850 - total flux cleaned = -0.00850332 Jy ! Component: 2900 - total flux cleaned = -0.00860827 Jy ! Component: 2950 - total flux cleaned = -0.00875455 Jy ! Component: 3000 - total flux cleaned = -0.00883744 Jy ! Component: 3050 - total flux cleaned = -0.00902276 Jy ! Component: 3100 - total flux cleaned = -0.00902281 Jy ! Component: 3150 - total flux cleaned = -0.00920561 Jy ! Component: 3200 - total flux cleaned = -0.00928628 Jy ! Component: 3250 - total flux cleaned = -0.00936629 Jy ! Component: 3300 - total flux cleaned = -0.00946569 Jy ! Component: 3350 - total flux cleaned = -0.00962354 Jy ! Component: 3400 - total flux cleaned = -0.00976057 Jy ! Component: 3450 - total flux cleaned = -0.00981885 Jy ! Component: 3500 - total flux cleaned = -0.00989611 Jy ! Component: 3550 - total flux cleaned = -0.00999207 Jy ! Component: 3600 - total flux cleaned = -0.0100874 Jy ! Component: 3650 - total flux cleaned = -0.0102009 Jy ! Component: 3700 - total flux cleaned = -0.0102382 Jy ! Component: 3750 - total flux cleaned = -0.0102944 Jy ! Component: 3800 - total flux cleaned = -0.010443 Jy ! Component: 3850 - total flux cleaned = -0.0105353 Jy ! Component: 3900 - total flux cleaned = -0.0106453 Jy ! Component: 3950 - total flux cleaned = -0.0107 Jy ! Component: 4000 - total flux cleaned = -0.0108449 Jy ! Component: 4050 - total flux cleaned = -0.0108628 Jy ! Total flux subtracted in 4096 components = -0.0109882 Jy ! Clean residual min=-0.000989 max=0.000892 Jy/beam ! Clean residual mean=0.000003 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.198017 Jy keep ! Adding 274 model components to the UV plane model. ! The established model now contains 341 components and 0.198017 Jy ![Exited script file: muppet] wmap "J0856-1105_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.601 x 8.873 at -3.513 degrees (North through East) ! Clean map min=-0.0040913 max=0.20241 Jy/beam ! Writing clean map to FITS file: J0856-1105_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.202414 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000329518 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.488382 0.488382 0.976763 1.95353 3.90705 7.81411 15.6282 31.2564 62.5129 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.202 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.601 x 8.873 at -3.513 degrees (North through East) ! Clean map min=-0.0040913 max=0.20241 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0856-1105_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:32:47 2019