! Started logfile: J0856-1105_S_2017_02_24_pus_uvs.log on Sat May 4 11:22:53 2019 obs J0856-1105_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0856-1105_S_2017_02_24_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.113333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0856-1105 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 204 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0856-1105_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.704254Jy sigma=0.005159 ! Fit after self-cal, rms=0.694904Jy sigma=0.005126 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.849 mas, bmaj=9.85 mas, bpa=26.61 degrees ! Estimated noise=8559.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.243116 Jy ! Component: 100 - total flux cleaned = 0.294195 Jy ! Total flux subtracted in 100 components = 0.294195 Jy ! Clean residual min=-0.016933 max=0.016757 Jy/beam ! Clean residual mean=0.000001 rms=0.006766 Jy/beam ! Combined flux in latest and established models = 0.294195 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.294195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088512Jy sigma=0.000639 ! Fit after self-cal, rms=0.088494Jy sigma=0.000639 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.104 mas, bmaj=10.48 mas, bpa=26.16 degrees ! Estimated noise=7808.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429769 Jy ! Component: 100 - total flux cleaned = 0.00759906 Jy ! Component: 150 - total flux cleaned = 0.0043931 Jy ! Component: 200 - total flux cleaned = 0.0017356 Jy ! Total flux subtracted in 200 components = 0.0017356 Jy ! Clean residual min=-0.007237 max=0.007185 Jy/beam ! Clean residual mean=0.000011 rms=0.002456 Jy/beam ! Combined flux in latest and established models = 0.29593 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 56 components and 0.29593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083556Jy sigma=0.000604 ! Fit after self-cal, rms=0.083368Jy sigma=0.000604 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.00* HN 1.02 KP 1.00* ! LA 1.00* MK 1.00* NL 0.92 OV 1.00* ! PT 1.00* SC 0.91 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.00 KP 1.00* ! LA 1.00* MK 1.00* NL 0.99 OV 1.00* ! PT 1.00* SC 1.06 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 1.03 KP 1.00* ! LA 1.00* MK 1.00* NL 1.03 OV 1.00* ! PT 1.00* SC 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.083368Jy sigma=0.000604 ! Fit after self-cal, rms=0.081372Jy sigma=0.000596 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=9.884 mas, bpa=25.78 degrees ! Estimated noise=8455.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107428 Jy ! Component: 100 - total flux cleaned = 0.000949489 Jy ! Component: 150 - total flux cleaned = 0.00105794 Jy ! Component: 200 - total flux cleaned = 0.000892378 Jy ! Total flux subtracted in 200 components = 0.000892378 Jy ! Clean residual min=-0.001253 max=0.001249 Jy/beam ! Clean residual mean=0.000001 rms=0.000470 Jy/beam ! Combined flux in latest and established models = 0.296823 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 101 components and 0.296823 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080904Jy sigma=0.000593 ! Fit after self-cal, rms=0.080899Jy sigma=0.000593 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080899Jy sigma=0.000593 ! Fit after self-cal, rms=0.080729Jy sigma=0.000593 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.23 mas, bmaj=9.881 mas, bpa=25.79 degrees ! Estimated noise=8436.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.64572e-05 Jy ! Component: 100 - total flux cleaned = -0.000203354 Jy ! Component: 150 - total flux cleaned = -0.00025316 Jy ! Component: 200 - total flux cleaned = -2.74827e-05 Jy ! Total flux subtracted in 200 components = -2.74827e-05 Jy ! Clean residual min=-0.000713 max=0.000721 Jy/beam ! Clean residual mean=0.000000 rms=0.000223 Jy/beam ! Combined flux in latest and established models = 0.296795 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 136 components and 0.296795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080656Jy sigma=0.000593 ! Fit after self-cal, rms=0.080652Jy sigma=0.000593 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.03247e-05 Jy ! Component: 100 - total flux cleaned = -3.96371e-05 Jy ! Component: 150 - total flux cleaned = -0.000395568 Jy ! Component: 200 - total flux cleaned = -0.000710568 Jy ! Total flux subtracted in 200 components = -0.000710568 Jy ! Clean residual min=-0.000524 max=0.000519 Jy/beam ! Clean residual mean=0.000000 rms=0.000177 Jy/beam ! Combined flux in latest and established models = 0.296084 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 168 components and 0.296084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080625Jy sigma=0.000592 ! Fit after self-cal, rms=0.080621Jy sigma=0.000592 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080621Jy sigma=0.000592 ! Fit after self-cal, rms=0.080573Jy sigma=0.000592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=9.881 mas, bpa=25.8 degrees ! Estimated noise=8430.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107564 Jy ! Component: 100 - total flux cleaned = -0.000304554 Jy ! Component: 150 - total flux cleaned = -0.000709697 Jy ! Component: 200 - total flux cleaned = -0.000948045 Jy ! Total flux subtracted in 200 components = -0.000948045 Jy ! Clean residual min=-0.000438 max=0.000441 Jy/beam ! Clean residual mean=0.000000 rms=0.000145 Jy/beam ! Combined flux in latest and established models = 0.295136 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 192 components and 0.295136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080557Jy sigma=0.000592 ! Fit after self-cal, rms=0.080554Jy sigma=0.000592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000211362 Jy ! Component: 100 - total flux cleaned = 0.000305954 Jy ! Component: 150 - total flux cleaned = 0.000197441 Jy ! Component: 200 - total flux cleaned = 0.000345956 Jy ! Total flux subtracted in 200 components = 0.000345956 Jy ! Clean residual min=-0.000350 max=0.000353 Jy/beam ! Clean residual mean=-0.000000 rms=0.000124 Jy/beam ! Combined flux in latest and established models = 0.295482 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 219 components and 0.295482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080543Jy sigma=0.000592 ! Fit after self-cal, rms=0.080542Jy sigma=0.000592 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080542Jy sigma=0.000592 ! Fit after self-cal, rms=0.080514Jy sigma=0.000592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.791 mas, bmaj=9.794 mas, bpa=23.94 degrees ! Estimated noise=10355.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.83079e-05 Jy ! Component: 100 - total flux cleaned = -6.8699e-05 Jy ! Component: 150 - total flux cleaned = -0.000162382 Jy ! Component: 200 - total flux cleaned = -0.000221676 Jy ! Total flux subtracted in 200 components = -0.000221676 Jy ! Clean residual min=-0.000240 max=0.000238 Jy/beam ! Clean residual mean=-0.000000 rms=0.000080 Jy/beam ! Combined flux in latest and established models = 0.295261 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 255 components and 0.295261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080508Jy sigma=0.000592 ! Fit after self-cal, rms=0.080506Jy sigma=0.000592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.36848e-05 Jy ! Component: 100 - total flux cleaned = -6.21808e-05 Jy ! Component: 150 - total flux cleaned = -0.000115421 Jy ! Component: 200 - total flux cleaned = -0.000128249 Jy ! Total flux subtracted in 200 components = -0.000128249 Jy ! Clean residual min=-0.000212 max=0.000215 Jy/beam ! Clean residual mean=0.000000 rms=0.000071 Jy/beam ! Combined flux in latest and established models = 0.295133 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 288 components and 0.295133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080501Jy sigma=0.000592 ! Fit after self-cal, rms=0.080501Jy sigma=0.000592 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=9.881 mas, bpa=25.79 degrees ! Estimated noise=8427.26 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.229 x 9.881 at 25.79 degrees (North through East) ! Clean map min=-0.0085008 max=0.29323 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.853 mas, bmaj=9.911 mas, bpa=27.12 degrees ! Estimated noise=9264.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.238092 Jy ! Component: 100 - total flux cleaned = 0.283869 Jy ! Component: 150 - total flux cleaned = 0.291399 Jy ! Component: 200 - total flux cleaned = 0.298518 Jy ! Total flux subtracted in 200 components = 0.298518 Jy ! Clean residual min=-0.006917 max=0.006916 Jy/beam ! Clean residual mean=0.000001 rms=0.002438 Jy/beam ! Combined flux in latest and established models = 0.298518 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.298518 Jy ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=9.881 mas, bpa=25.79 degrees ! Estimated noise=8427.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132178 Jy ! Component: 100 - total flux cleaned = 0.0019111 Jy ! Component: 150 - total flux cleaned = 0.001764 Jy ! Component: 200 - total flux cleaned = 0.000488536 Jy ! Total flux subtracted in 200 components = 0.000488536 Jy ! Clean residual min=-0.002551 max=0.002541 Jy/beam ! Clean residual mean=0.000004 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.299007 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 76 components and 0.299007 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.791 mas, bmaj=9.794 mas, bpa=23.94 degrees ! Estimated noise=10355.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000523611 Jy ! Component: 100 - total flux cleaned = 0.000812072 Jy ! Component: 150 - total flux cleaned = 0.000940108 Jy ! Component: 200 - total flux cleaned = 0.000878428 Jy ! Total flux subtracted in 200 components = 0.000878428 Jy ! Clean residual min=-0.001015 max=0.001003 Jy/beam ! Clean residual mean=0.000004 rms=0.000306 Jy/beam ! Combined flux in latest and established models = 0.299885 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000307102 Jy ! Component: 100 - total flux cleaned = 0.000693558 Jy ! Component: 150 - total flux cleaned = 0.00109704 Jy ! Component: 200 - total flux cleaned = 0.00181814 Jy ! Total flux subtracted in 200 components = 0.00181814 Jy ! Clean residual min=-0.001244 max=0.001259 Jy/beam ! Clean residual mean=0.000004 rms=0.000430 Jy/beam ! Combined flux in latest and established models = 0.301704 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 123 components and 0.301703 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.229 mas, bmaj=9.881 mas, bpa=25.79 degrees ! Estimated noise=8427.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237915 Jy ! Component: 100 - total flux cleaned = -0.000240031 Jy ! Component: 150 - total flux cleaned = -0.000262286 Jy ! Component: 200 - total flux cleaned = 9.60385e-05 Jy ! Total flux subtracted in 200 components = 9.60385e-05 Jy ! Clean residual min=-0.000976 max=0.000975 Jy/beam ! Clean residual mean=-0.000001 rms=0.000366 Jy/beam ! Combined flux in latest and established models = 0.301799 Jy selfcal ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 165 components and 0.3018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080552Jy sigma=0.000592 ! Fit after self-cal, rms=0.080548Jy sigma=0.000592 wmodel J0856-1105_S_2017_02_24_pus_map.mod ! Writing 165 model components to file: J0856-1105_S_2017_02_24_pus_map.mod wobs J0856-1105_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0856-1105_S_2017_02_24_pus_uvs.fits wwins J0856-1105_S_2017_02_24_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0856-1105_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.229 x 9.881 at 25.79 degrees (North through East) ! Clean map min=-0.007058 max=0.27018 Jy/beam ! Writing clean map to FITS file: J0856-1105_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.270177 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000317329 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.352357 0.352357 0.704713 1.40943 2.81885 5.63771 11.2754 22.5508 45.1016 90.2033 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.27 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.229 x 9.881 at 25.79 degrees (North through East) ! Clean map min=-0.007058 max=0.27018 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0856-1105_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:22:55 2019