! Started logfile: J0856-1105_S_2017_02_19_pus_uvs.log on Sat May 4 18:46:52 2019 obs J0856-1105_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0856-1105_S_2017_02_19_pus_uva.fits ! AN table 1: 7 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.542857 visibilities/baseline/integration-bin. ! Found source: J0856-1105 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 684 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0856-1105_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 41 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.726534Jy sigma=0.005466 ! Fit after self-cal, rms=0.722575Jy sigma=0.005439 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.601 mas, bmaj=12.91 mas, bpa=26.04 degrees ! Estimated noise=4851.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.215552 Jy ! Component: 100 - total flux cleaned = 0.263023 Jy ! Total flux subtracted in 100 components = 0.263023 Jy ! Clean residual min=-0.015634 max=0.018421 Jy/beam ! Clean residual mean=-0.000040 rms=0.004615 Jy/beam ! Combined flux in latest and established models = 0.263023 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.263023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098233Jy sigma=0.000686 ! Fit after self-cal, rms=0.098236Jy sigma=0.000685 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.998 mas, bmaj=13.44 mas, bpa=26.09 degrees ! Estimated noise=4013.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0201555 Jy ! Component: 100 - total flux cleaned = 0.030779 Jy ! Component: 150 - total flux cleaned = 0.0375105 Jy ! Component: 200 - total flux cleaned = 0.0412793 Jy ! Total flux subtracted in 200 components = 0.0412793 Jy ! Clean residual min=-0.010529 max=0.011412 Jy/beam ! Clean residual mean=-0.000025 rms=0.002907 Jy/beam ! Combined flux in latest and established models = 0.304302 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 31 components and 0.304302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093328Jy sigma=0.000657 ! Fit after self-cal, rms=0.093339Jy sigma=0.000657 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.93 HN 0.98 KP 1.01 ! LA 1.02 MK 1.00* NL 0.93 OV 1.01 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.03 HN 1.06 KP 0.99 ! LA 1.01 MK 1.00* NL 1.04 OV 1.06 ! PT 1.00* SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.08 HN 1.02 KP 0.93 ! LA 0.79 MK 1.00* NL 1.21 OV 0.94 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.07 HN 0.95 KP 1.00* ! LA 0.80 MK 1.00* NL 1.00* OV 1.09 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.093339Jy sigma=0.000657 ! Fit after self-cal, rms=0.083675Jy sigma=0.000612 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.999 mas, bmaj=13.58 mas, bpa=26.12 degrees ! Estimated noise=3975.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141292 Jy ! Component: 100 - total flux cleaned = -0.00153149 Jy ! Component: 150 - total flux cleaned = -0.00152667 Jy ! Component: 200 - total flux cleaned = -0.00159544 Jy ! Total flux subtracted in 200 components = -0.00159544 Jy ! Clean residual min=-0.007859 max=0.007577 Jy/beam ! Clean residual mean=-0.000010 rms=0.001932 Jy/beam ! Combined flux in latest and established models = 0.302706 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.302706 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083390Jy sigma=0.000611 ! Fit after self-cal, rms=0.083357Jy sigma=0.000610 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083357Jy sigma=0.000610 ! Fit after self-cal, rms=0.083328Jy sigma=0.000610 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.995 mas, bmaj=13.63 mas, bpa=26.18 degrees ! Estimated noise=3971.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00138452 Jy ! Component: 100 - total flux cleaned = -0.00179078 Jy ! Component: 150 - total flux cleaned = -0.00185282 Jy ! Component: 200 - total flux cleaned = -0.00170845 Jy ! Total flux subtracted in 200 components = -0.00170845 Jy ! Clean residual min=-0.007617 max=0.007428 Jy/beam ! Clean residual mean=-0.000008 rms=0.001887 Jy/beam ! Combined flux in latest and established models = 0.300998 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 51 components and 0.300998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083213Jy sigma=0.000609 ! Fit after self-cal, rms=0.083209Jy sigma=0.000609 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142572 Jy ! Component: 100 - total flux cleaned = 0.000225885 Jy ! Component: 150 - total flux cleaned = 0.000297074 Jy ! Component: 200 - total flux cleaned = 0.000362234 Jy ! Total flux subtracted in 200 components = 0.000362234 Jy ! Clean residual min=-0.007547 max=0.007400 Jy/beam ! Clean residual mean=-0.000008 rms=0.001869 Jy/beam ! Combined flux in latest and established models = 0.30136 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 64 components and 0.30136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083168Jy sigma=0.000609 ! Fit after self-cal, rms=0.083164Jy sigma=0.000609 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083164Jy sigma=0.000609 ! Fit after self-cal, rms=0.083183Jy sigma=0.000609 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.992 mas, bmaj=13.66 mas, bpa=26.23 degrees ! Estimated noise=3968.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122888 Jy ! Component: 100 - total flux cleaned = -0.00144289 Jy ! Component: 150 - total flux cleaned = -0.0016782 Jy ! Component: 200 - total flux cleaned = -0.00164989 Jy ! Total flux subtracted in 200 components = -0.00164989 Jy ! Clean residual min=-0.007495 max=0.007284 Jy/beam ! Clean residual mean=-0.000006 rms=0.001847 Jy/beam ! Combined flux in latest and established models = 0.29971 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 71 components and 0.29971 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083132Jy sigma=0.000609 ! Fit after self-cal, rms=0.083131Jy sigma=0.000609 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000347066 Jy ! Component: 100 - total flux cleaned = 0.000294131 Jy ! Component: 150 - total flux cleaned = 0.000318705 Jy ! Component: 200 - total flux cleaned = 0.000341798 Jy ! Total flux subtracted in 200 components = 0.000341798 Jy ! Clean residual min=-0.007466 max=0.007300 Jy/beam ! Clean residual mean=-0.000006 rms=0.001837 Jy/beam ! Combined flux in latest and established models = 0.300052 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 0.300052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083113Jy sigma=0.000609 ! Fit after self-cal, rms=0.083111Jy sigma=0.000609 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083111Jy sigma=0.000609 ! Fit after self-cal, rms=0.083149Jy sigma=0.000609 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.095 mas, bmaj=15.47 mas, bpa=17.52 degrees ! Estimated noise=4520.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000359648 Jy ! Component: 100 - total flux cleaned = 0.000178369 Jy ! Component: 150 - total flux cleaned = 8.6301e-05 Jy ! Component: 200 - total flux cleaned = -2.75271e-05 Jy ! Total flux subtracted in 200 components = -2.75271e-05 Jy ! Clean residual min=-0.006197 max=0.006751 Jy/beam ! Clean residual mean=-0.000010 rms=0.001735 Jy/beam ! Combined flux in latest and established models = 0.300025 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 99 components and 0.300025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083152Jy sigma=0.000609 ! Fit after self-cal, rms=0.083156Jy sigma=0.000609 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.74749e-05 Jy ! Component: 100 - total flux cleaned = -0.000110173 Jy ! Component: 150 - total flux cleaned = -0.000203522 Jy ! Component: 200 - total flux cleaned = -0.00031268 Jy ! Total flux subtracted in 200 components = -0.00031268 Jy ! Clean residual min=-0.006248 max=0.006727 Jy/beam ! Clean residual mean=-0.000010 rms=0.001726 Jy/beam ! Combined flux in latest and established models = 0.299712 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 105 components and 0.299712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083165Jy sigma=0.000609 ! Fit after self-cal, rms=0.083164Jy sigma=0.000609 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.99 mas, bmaj=13.69 mas, bpa=26.26 degrees ! Estimated noise=3966.09 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.99 x 13.69 at 26.26 degrees (North through East) ! Clean map min=-0.0070535 max=0.27761 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.576 mas, bmaj=13.14 mas, bpa=26.24 degrees ! Estimated noise=4828.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.214422 Jy ! Component: 100 - total flux cleaned = 0.261407 Jy ! Component: 150 - total flux cleaned = 0.27684 Jy ! Component: 200 - total flux cleaned = 0.285874 Jy ! Total flux subtracted in 200 components = 0.285874 Jy ! Clean residual min=-0.009730 max=0.009853 Jy/beam ! Clean residual mean=-0.000010 rms=0.002690 Jy/beam ! Combined flux in latest and established models = 0.285874 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.285874 Jy ! Inverting map and beam ! Estimated beam: bmin=3.99 mas, bmaj=13.69 mas, bpa=26.26 degrees ! Estimated noise=3966.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00702452 Jy ! Component: 100 - total flux cleaned = 0.00988343 Jy ! Component: 150 - total flux cleaned = 0.0106949 Jy ! Component: 200 - total flux cleaned = 0.0115042 Jy ! Total flux subtracted in 200 components = 0.0115042 Jy ! Clean residual min=-0.007853 max=0.007530 Jy/beam ! Clean residual mean=-0.000006 rms=0.002015 Jy/beam ! Combined flux in latest and established models = 0.297378 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 30 components and 0.297378 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.095 mas, bmaj=15.47 mas, bpa=17.52 degrees ! Estimated noise=4520.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204717 Jy ! Component: 100 - total flux cleaned = 0.00229709 Jy ! Component: 150 - total flux cleaned = 0.00234114 Jy ! Component: 200 - total flux cleaned = 0.00234377 Jy ! Total flux subtracted in 200 components = 0.00234377 Jy ! Clean residual min=-0.006446 max=0.006936 Jy/beam ! Clean residual mean=-0.000011 rms=0.001795 Jy/beam ! Combined flux in latest and established models = 0.299722 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.78453e-05 Jy ! Component: 100 - total flux cleaned = -0.000127932 Jy ! Component: 150 - total flux cleaned = -0.000100658 Jy ! Component: 200 - total flux cleaned = -0.000127405 Jy ! Total flux subtracted in 200 components = -0.000127405 Jy ! Clean residual min=-0.006512 max=0.006804 Jy/beam ! Clean residual mean=-0.000011 rms=0.001778 Jy/beam ! Combined flux in latest and established models = 0.299594 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 51 components and 0.299594 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.99 mas, bmaj=13.69 mas, bpa=26.26 degrees ! Estimated noise=3966.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000755303 Jy ! Component: 100 - total flux cleaned = -0.000581288 Jy ! Component: 150 - total flux cleaned = -0.000509108 Jy ! Component: 200 - total flux cleaned = -0.000511715 Jy ! Total flux subtracted in 200 components = -0.000511715 Jy ! Clean residual min=-0.007562 max=0.007334 Jy/beam ! Clean residual mean=-0.000005 rms=0.001885 Jy/beam ! Combined flux in latest and established models = 0.299083 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 61 components and 0.299083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083297Jy sigma=0.000609 ! Fit after self-cal, rms=0.083289Jy sigma=0.000609 wmodel J0856-1105_S_2017_02_19_pus_map.mod ! Writing 61 model components to file: J0856-1105_S_2017_02_19_pus_map.mod wobs J0856-1105_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0856-1105_S_2017_02_19_pus_uvs.fits wwins J0856-1105_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J0856-1105_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 9.50621e-05 Jy ! Component: 100 - total flux cleaned = -0.000714636 Jy ! Component: 150 - total flux cleaned = -0.00071026 Jy ! Component: 200 - total flux cleaned = -0.000903471 Jy ! Component: 250 - total flux cleaned = -0.000998086 Jy ! Component: 300 - total flux cleaned = -0.00108577 Jy ! Component: 350 - total flux cleaned = -0.00116799 Jy ! Component: 400 - total flux cleaned = -0.0014066 Jy ! Component: 450 - total flux cleaned = -0.00171331 Jy ! Component: 500 - total flux cleaned = -0.00186211 Jy ! Component: 550 - total flux cleaned = -0.0021476 Jy ! Component: 600 - total flux cleaned = -0.00228487 Jy ! Component: 650 - total flux cleaned = -0.00235059 Jy ! Component: 700 - total flux cleaned = -0.00241545 Jy ! Component: 750 - total flux cleaned = -0.00247829 Jy ! Component: 800 - total flux cleaned = -0.00253875 Jy ! Component: 850 - total flux cleaned = -0.00277722 Jy ! Component: 900 - total flux cleaned = -0.00283438 Jy ! Component: 950 - total flux cleaned = -0.00305935 Jy ! Component: 1000 - total flux cleaned = -0.00316904 Jy ! Component: 1050 - total flux cleaned = -0.00327763 Jy ! Component: 1100 - total flux cleaned = -0.00354271 Jy ! Component: 1150 - total flux cleaned = -0.00369875 Jy ! Component: 1200 - total flux cleaned = -0.00390236 Jy ! Component: 1250 - total flux cleaned = -0.00385128 Jy ! Component: 1300 - total flux cleaned = -0.0039516 Jy ! Component: 1350 - total flux cleaned = -0.00405065 Jy ! Component: 1400 - total flux cleaned = -0.00405097 Jy ! Component: 1450 - total flux cleaned = -0.00414912 Jy ! Component: 1500 - total flux cleaned = -0.00419735 Jy ! Component: 1550 - total flux cleaned = -0.0041488 Jy ! Component: 1600 - total flux cleaned = -0.00405142 Jy ! Component: 1650 - total flux cleaned = -0.00400219 Jy ! Component: 1700 - total flux cleaned = -0.0038582 Jy ! Component: 1750 - total flux cleaned = -0.00385829 Jy ! Component: 1800 - total flux cleaned = -0.00385804 Jy ! Component: 1850 - total flux cleaned = -0.00390538 Jy ! Component: 1900 - total flux cleaned = -0.00385751 Jy ! Component: 1950 - total flux cleaned = -0.00380887 Jy ! Component: 2000 - total flux cleaned = -0.00371213 Jy ! Component: 2050 - total flux cleaned = -0.00356375 Jy ! Component: 2100 - total flux cleaned = -0.00346406 Jy ! Component: 2150 - total flux cleaned = -0.00326158 Jy ! Component: 2200 - total flux cleaned = -0.00310635 Jy ! Component: 2250 - total flux cleaned = -0.00294868 Jy ! Component: 2300 - total flux cleaned = -0.00284157 Jy ! Component: 2350 - total flux cleaned = -0.00267888 Jy ! Component: 2400 - total flux cleaned = -0.00256847 Jy ! Component: 2450 - total flux cleaned = -0.00262578 Jy ! Component: 2500 - total flux cleaned = -0.00262598 Jy ! Component: 2550 - total flux cleaned = -0.00268542 Jy ! Component: 2600 - total flux cleaned = -0.00274697 Jy ! Component: 2650 - total flux cleaned = -0.00280876 Jy ! Component: 2700 - total flux cleaned = -0.00293827 Jy ! Component: 2750 - total flux cleaned = -0.00300663 Jy ! Component: 2800 - total flux cleaned = -0.00307573 Jy ! Component: 2850 - total flux cleaned = -0.00314702 Jy ! Component: 2900 - total flux cleaned = -0.00329318 Jy ! Component: 2950 - total flux cleaned = -0.00329375 Jy ! Component: 3000 - total flux cleaned = -0.00344833 Jy ! Component: 3050 - total flux cleaned = -0.00344806 Jy ! Component: 3100 - total flux cleaned = -0.00360967 Jy ! Component: 3150 - total flux cleaned = -0.00377804 Jy ! Component: 3200 - total flux cleaned = -0.00386532 Jy ! Component: 3250 - total flux cleaned = -0.00395601 Jy ! Component: 3300 - total flux cleaned = -0.00404649 Jy ! Component: 3350 - total flux cleaned = -0.004237 Jy ! Component: 3400 - total flux cleaned = -0.00433504 Jy ! Component: 3450 - total flux cleaned = -0.00453745 Jy ! Component: 3500 - total flux cleaned = -0.00464292 Jy ! Component: 3550 - total flux cleaned = -0.00475065 Jy ! Component: 3600 - total flux cleaned = -0.00486062 Jy ! Component: 3650 - total flux cleaned = -0.00497384 Jy ! Component: 3700 - total flux cleaned = -0.00520911 Jy ! Component: 3750 - total flux cleaned = -0.00533159 Jy ! Component: 3800 - total flux cleaned = -0.00545859 Jy ! Component: 3850 - total flux cleaned = -0.00558822 Jy ! Component: 3900 - total flux cleaned = -0.00585515 Jy ! Component: 3950 - total flux cleaned = -0.00599376 Jy ! Component: 4000 - total flux cleaned = -0.00613386 Jy ! Component: 4050 - total flux cleaned = -0.0062787 Jy ! Total flux subtracted in 4096 components = -0.0064296 Jy ! Clean residual min=-0.007624 max=0.007539 Jy/beam ! Clean residual mean=0.000008 rms=0.001997 Jy/beam ! Combined flux in latest and established models = 0.292653 Jy keep ! Adding 150 model components to the UV plane model. ! The established model now contains 211 components and 0.292653 Jy ![Exited script file: muppet] wmap "J0856-1105_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.99 x 13.69 at 26.26 degrees (North through East) ! Clean map min=-0.019626 max=0.27878 Jy/beam ! Writing clean map to FITS file: J0856-1105_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.278783 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00213933 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.30215 2.30215 4.60429 9.20859 18.4172 36.8344 73.6687 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0064 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.278 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.99 x 13.69 at 26.26 degrees (North through East) ! Clean map min=-0.019626 max=0.27878 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0856-1105_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:46:56 2019