! Started logfile: J0856-1105_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:09:29 2019 obs J0856-1105_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0856-1105_S_2017_01_16_pus_uva.fits ! AN table 1: 10 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.433333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0856-1105 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 780 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0856-1105_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.712687Jy sigma=0.005067 ! Fit after self-cal, rms=0.708499Jy sigma=0.005034 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.242 mas, bmaj=13.48 mas, bpa=20.08 degrees ! Estimated noise=4560.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.230184 Jy ! Component: 100 - total flux cleaned = 0.281603 Jy ! Total flux subtracted in 100 components = 0.281603 Jy ! Clean residual min=-0.018533 max=0.023398 Jy/beam ! Clean residual mean=-0.000278 rms=0.005380 Jy/beam ! Combined flux in latest and established models = 0.281603 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.281603 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.179763Jy sigma=0.000721 ! Fit after self-cal, rms=0.179756Jy sigma=0.000721 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.854 mas, bmaj=13.26 mas, bpa=18.05 degrees ! Estimated noise=3932.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0251196 Jy ! Component: 100 - total flux cleaned = 0.0397716 Jy ! Component: 150 - total flux cleaned = 0.0495154 Jy ! Component: 200 - total flux cleaned = 0.0564448 Jy ! Total flux subtracted in 200 components = 0.0564448 Jy ! Clean residual min=-0.015497 max=0.013138 Jy/beam ! Clean residual mean=-0.000058 rms=0.003876 Jy/beam ! Combined flux in latest and established models = 0.338047 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 33 components and 0.338048 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172873Jy sigma=0.000684 ! Fit after self-cal, rms=0.172857Jy sigma=0.000683 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 1.00* KP 1.04 ! LA 1.04 MK 1.00* NL 0.93 OV 0.96 ! PT 1.00* SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.96 HN 1.00* KP 0.98 ! LA 0.93 MK 1.00* NL 1.04 OV 1.04 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.97 HN 1.00* KP 1.11 ! LA 1.05 MK 1.00* NL 0.97 OV 0.99 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.96 HN 1.00* KP 1.00* ! LA 0.41 MK 1.00* NL 1.00* OV 0.94 ! PT 1.00* SC 1.56 ! ! ! Fit before self-cal, rms=0.172857Jy sigma=0.000683 ! Fit after self-cal, rms=0.120952Jy sigma=0.000638 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.897 mas, bmaj=13.34 mas, bpa=17.92 degrees ! Estimated noise=3901.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00148506 Jy ! Component: 100 - total flux cleaned = -0.00214504 Jy ! Component: 150 - total flux cleaned = -0.00243757 Jy ! Component: 200 - total flux cleaned = -0.00258713 Jy ! Total flux subtracted in 200 components = -0.00258713 Jy ! Clean residual min=-0.009109 max=0.008854 Jy/beam ! Clean residual mean=0.000008 rms=0.002346 Jy/beam ! Combined flux in latest and established models = 0.33546 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.33546 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120811Jy sigma=0.000637 ! Fit after self-cal, rms=0.120154Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120154Jy sigma=0.000636 ! Fit after self-cal, rms=0.119976Jy sigma=0.000636 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.897 mas, bmaj=13.35 mas, bpa=17.89 degrees ! Estimated noise=3899.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143225 Jy ! Component: 100 - total flux cleaned = -0.00168129 Jy ! Component: 150 - total flux cleaned = -0.00176547 Jy ! Component: 200 - total flux cleaned = -0.00180419 Jy ! Total flux subtracted in 200 components = -0.00180419 Jy ! Clean residual min=-0.008932 max=0.008768 Jy/beam ! Clean residual mean=0.000008 rms=0.002302 Jy/beam ! Combined flux in latest and established models = 0.333656 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 54 components and 0.333656 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119904Jy sigma=0.000636 ! Fit after self-cal, rms=0.119887Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000135587 Jy ! Component: 100 - total flux cleaned = -0.000171067 Jy ! Component: 150 - total flux cleaned = -0.000239227 Jy ! Component: 200 - total flux cleaned = -0.000271507 Jy ! Total flux subtracted in 200 components = -0.000271507 Jy ! Clean residual min=-0.008795 max=0.008747 Jy/beam ! Clean residual mean=0.000007 rms=0.002289 Jy/beam ! Combined flux in latest and established models = 0.333385 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 59 components and 0.333385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119835Jy sigma=0.000636 ! Fit after self-cal, rms=0.119844Jy sigma=0.000636 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119844Jy sigma=0.000636 ! Fit after self-cal, rms=0.119853Jy sigma=0.000636 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.899 mas, bmaj=13.35 mas, bpa=17.86 degrees ! Estimated noise=3897.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0013971 Jy ! Component: 100 - total flux cleaned = -0.00158209 Jy ! Component: 150 - total flux cleaned = -0.00175141 Jy ! Component: 200 - total flux cleaned = -0.00181587 Jy ! Total flux subtracted in 200 components = -0.00181587 Jy ! Clean residual min=-0.008758 max=0.008711 Jy/beam ! Clean residual mean=0.000006 rms=0.002258 Jy/beam ! Combined flux in latest and established models = 0.331569 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 63 components and 0.331569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119812Jy sigma=0.000636 ! Fit after self-cal, rms=0.119818Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.064e-06 Jy ! Component: 100 - total flux cleaned = -6.78414e-05 Jy ! Component: 150 - total flux cleaned = -0.000184002 Jy ! Component: 200 - total flux cleaned = -0.000211786 Jy ! Total flux subtracted in 200 components = -0.000211786 Jy ! Clean residual min=-0.008694 max=0.008686 Jy/beam ! Clean residual mean=0.000006 rms=0.002249 Jy/beam ! Combined flux in latest and established models = 0.331357 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 65 components and 0.331357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119774Jy sigma=0.000636 ! Fit after self-cal, rms=0.119783Jy sigma=0.000636 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119783Jy sigma=0.000636 ! Fit after self-cal, rms=0.119794Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.899 mas, bmaj=14.27 mas, bpa=2.18 degrees ! Estimated noise=4599.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000642527 Jy ! Component: 100 - total flux cleaned = -0.00073378 Jy ! Component: 150 - total flux cleaned = -0.000893399 Jy ! Component: 200 - total flux cleaned = -0.00106827 Jy ! Total flux subtracted in 200 components = -0.00106827 Jy ! Clean residual min=-0.009660 max=0.008394 Jy/beam ! Clean residual mean=0.000013 rms=0.002747 Jy/beam ! Combined flux in latest and established models = 0.330289 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 72 components and 0.330289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119823Jy sigma=0.000635 ! Fit after self-cal, rms=0.119832Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000162632 Jy ! Component: 100 - total flux cleaned = -0.000160687 Jy ! Component: 150 - total flux cleaned = -0.000159462 Jy ! Component: 200 - total flux cleaned = -0.000159022 Jy ! Total flux subtracted in 200 components = -0.000159022 Jy ! Clean residual min=-0.009440 max=0.008202 Jy/beam ! Clean residual mean=0.000013 rms=0.002729 Jy/beam ! Combined flux in latest and established models = 0.33013 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 75 components and 0.33013 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119838Jy sigma=0.000635 ! Fit after self-cal, rms=0.119848Jy sigma=0.000635 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.901 mas, bmaj=13.35 mas, bpa=17.84 degrees ! Estimated noise=3896.32 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.901 x 13.35 at 17.84 degrees (North through East) ! Clean map min=-0.0082244 max=0.28979 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=13.49 mas, bpa=19.93 degrees ! Estimated noise=4600.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.231605 Jy ! Component: 100 - total flux cleaned = 0.282751 Jy ! Component: 150 - total flux cleaned = 0.300967 Jy ! Component: 200 - total flux cleaned = 0.312181 Jy ! Total flux subtracted in 200 components = 0.312181 Jy ! Clean residual min=-0.010090 max=0.009421 Jy/beam ! Clean residual mean=-0.000081 rms=0.002770 Jy/beam ! Combined flux in latest and established models = 0.312181 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.312181 Jy ! Inverting map and beam ! Estimated beam: bmin=3.901 mas, bmaj=13.35 mas, bpa=17.84 degrees ! Estimated noise=3896.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00774862 Jy ! Component: 100 - total flux cleaned = 0.0119666 Jy ! Component: 150 - total flux cleaned = 0.0148041 Jy ! Component: 200 - total flux cleaned = 0.0155013 Jy ! Total flux subtracted in 200 components = 0.0155013 Jy ! Clean residual min=-0.009014 max=0.008775 Jy/beam ! Clean residual mean=-0.000005 rms=0.002312 Jy/beam ! Combined flux in latest and established models = 0.327682 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 35 components and 0.327682 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.899 mas, bmaj=14.27 mas, bpa=2.18 degrees ! Estimated noise=4599.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204767 Jy ! Component: 100 - total flux cleaned = 0.00199831 Jy ! Component: 150 - total flux cleaned = 0.00183188 Jy ! Component: 200 - total flux cleaned = 0.00188372 Jy ! Total flux subtracted in 200 components = 0.00188372 Jy ! Clean residual min=-0.010336 max=0.009002 Jy/beam ! Clean residual mean=0.000011 rms=0.002822 Jy/beam ! Combined flux in latest and established models = 0.329566 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.07519e-06 Jy ! Component: 100 - total flux cleaned = 4.74571e-05 Jy ! Component: 150 - total flux cleaned = 9.07051e-05 Jy ! Component: 200 - total flux cleaned = 0.000131648 Jy ! Total flux subtracted in 200 components = 0.000131648 Jy ! Clean residual min=-0.010155 max=0.008724 Jy/beam ! Clean residual mean=0.000011 rms=0.002786 Jy/beam ! Combined flux in latest and established models = 0.329697 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 0.329697 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.901 mas, bmaj=13.35 mas, bpa=17.84 degrees ! Estimated noise=3896.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000456437 Jy ! Component: 100 - total flux cleaned = -0.000547525 Jy ! Component: 150 - total flux cleaned = -0.000420007 Jy ! Component: 200 - total flux cleaned = -0.000361092 Jy ! Total flux subtracted in 200 components = -0.000361092 Jy ! Clean residual min=-0.008522 max=0.008544 Jy/beam ! Clean residual mean=0.000003 rms=0.002229 Jy/beam ! Combined flux in latest and established models = 0.329336 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 68 components and 0.329336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119998Jy sigma=0.000636 ! Fit after self-cal, rms=0.120005Jy sigma=0.000636 wmodel J0856-1105_S_2017_01_16_pus_map.mod ! Writing 68 model components to file: J0856-1105_S_2017_01_16_pus_map.mod wobs J0856-1105_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0856-1105_S_2017_01_16_pus_uvs.fits wwins J0856-1105_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0856-1105_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000821529 Jy ! Component: 100 - total flux cleaned = -0.000830156 Jy ! Component: 150 - total flux cleaned = -2.94238e-05 Jy ! Component: 200 - total flux cleaned = 0.00028482 Jy ! Component: 250 - total flux cleaned = 0.000185202 Jy ! Component: 300 - total flux cleaned = 0.000629447 Jy ! Component: 350 - total flux cleaned = 0.00079742 Jy ! Component: 400 - total flux cleaned = 0.000801597 Jy ! Component: 450 - total flux cleaned = 0.000651952 Jy ! Component: 500 - total flux cleaned = 0.000508398 Jy ! Component: 550 - total flux cleaned = 0.000158581 Jy ! Component: 600 - total flux cleaned = -0.000312018 Jy ! Component: 650 - total flux cleaned = -0.00096217 Jy ! Component: 700 - total flux cleaned = -0.00133931 Jy ! Component: 750 - total flux cleaned = -0.00182892 Jy ! Component: 800 - total flux cleaned = -0.00224451 Jy ! Component: 850 - total flux cleaned = -0.00270711 Jy ! Component: 900 - total flux cleaned = -0.00315848 Jy ! Component: 950 - total flux cleaned = -0.00359938 Jy ! Component: 1000 - total flux cleaned = -0.00381539 Jy ! Component: 1050 - total flux cleaned = -0.0040799 Jy ! Component: 1100 - total flux cleaned = -0.00413251 Jy ! Component: 1150 - total flux cleaned = -0.00418428 Jy ! Component: 1200 - total flux cleaned = -0.00418477 Jy ! Component: 1250 - total flux cleaned = -0.00408582 Jy ! Component: 1300 - total flux cleaned = -0.00413519 Jy ! Component: 1350 - total flux cleaned = -0.00413553 Jy ! Component: 1400 - total flux cleaned = -0.00418365 Jy ! Component: 1450 - total flux cleaned = -0.00427802 Jy ! Component: 1500 - total flux cleaned = -0.00427803 Jy ! Component: 1550 - total flux cleaned = -0.00437011 Jy ! Component: 1600 - total flux cleaned = -0.00450614 Jy ! Component: 1650 - total flux cleaned = -0.00468632 Jy ! Component: 1700 - total flux cleaned = -0.0047756 Jy ! Component: 1750 - total flux cleaned = -0.00486419 Jy ! Component: 1800 - total flux cleaned = -0.00508324 Jy ! Component: 1850 - total flux cleaned = -0.00534248 Jy ! Component: 1900 - total flux cleaned = -0.00542807 Jy ! Component: 1950 - total flux cleaned = -0.0054709 Jy ! Component: 2000 - total flux cleaned = -0.00559798 Jy ! Component: 2050 - total flux cleaned = -0.00576576 Jy ! Component: 2100 - total flux cleaned = -0.0058073 Jy ! Component: 2150 - total flux cleaned = -0.00593188 Jy ! Component: 2200 - total flux cleaned = -0.00609784 Jy ! Component: 2250 - total flux cleaned = -0.00613899 Jy ! Component: 2300 - total flux cleaned = -0.00634418 Jy ! Component: 2350 - total flux cleaned = -0.00642599 Jy ! Component: 2400 - total flux cleaned = -0.00654843 Jy ! Component: 2450 - total flux cleaned = -0.00667024 Jy ! Component: 2500 - total flux cleaned = -0.00675116 Jy ! Component: 2550 - total flux cleaned = -0.00687222 Jy ! Component: 2600 - total flux cleaned = -0.00699321 Jy ! Component: 2650 - total flux cleaned = -0.00711402 Jy ! Component: 2700 - total flux cleaned = -0.00727483 Jy ! Component: 2750 - total flux cleaned = -0.00735485 Jy ! Component: 2800 - total flux cleaned = -0.00751515 Jy ! Component: 2850 - total flux cleaned = -0.00755527 Jy ! Component: 2900 - total flux cleaned = -0.0076351 Jy ! Component: 2950 - total flux cleaned = -0.00771484 Jy ! Component: 3000 - total flux cleaned = -0.00771463 Jy ! Component: 3050 - total flux cleaned = -0.00783434 Jy ! Component: 3100 - total flux cleaned = -0.00787413 Jy ! Component: 3150 - total flux cleaned = -0.00799366 Jy ! Component: 3200 - total flux cleaned = -0.00799332 Jy ! Component: 3250 - total flux cleaned = -0.00811323 Jy ! Component: 3300 - total flux cleaned = -0.00819377 Jy ! Component: 3350 - total flux cleaned = -0.00831489 Jy ! Component: 3400 - total flux cleaned = -0.00827471 Jy ! Component: 3450 - total flux cleaned = -0.00831538 Jy ! Component: 3500 - total flux cleaned = -0.00835605 Jy ! Component: 3550 - total flux cleaned = -0.00839707 Jy ! Component: 3600 - total flux cleaned = -0.00847911 Jy ! Component: 3650 - total flux cleaned = -0.00852026 Jy ! Component: 3700 - total flux cleaned = -0.00856144 Jy ! Component: 3750 - total flux cleaned = -0.0086859 Jy ! Component: 3800 - total flux cleaned = -0.00876918 Jy ! Component: 3850 - total flux cleaned = -0.00881091 Jy ! Component: 3900 - total flux cleaned = -0.00893712 Jy ! Component: 3950 - total flux cleaned = -0.00910623 Jy ! Component: 4000 - total flux cleaned = -0.0091063 Jy ! Component: 4050 - total flux cleaned = -0.00923399 Jy ! Total flux subtracted in 4096 components = -0.00936287 Jy ! Clean residual min=-0.002409 max=0.002377 Jy/beam ! Clean residual mean=0.000019 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.319973 Jy keep ! Adding 224 model components to the UV plane model. ! The established model now contains 292 components and 0.319973 Jy ![Exited script file: muppet] wmap "J0856-1105_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.901 x 13.35 at 17.84 degrees (North through East) ! Clean map min=-0.0063803 max=0.28938 Jy/beam ! Writing clean map to FITS file: J0856-1105_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.289381 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000713631 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.739819 0.739819 1.47964 2.95928 5.91855 11.8371 23.6742 47.3484 94.6968 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.289 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.901 x 13.35 at 17.84 degrees (North through East) ! Clean map min=-0.0063803 max=0.28938 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0856-1105_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:09:34 2019