! Started logfile: J0854-2540_S_2017_05_27_pus_uvs.log on Fri May 3 11:02:52 2019 obs J0854-2540_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0854-2540_S_2017_05_27_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.930409 visibilities/baseline/integration-bin. ! Found source: J0854-2540 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 12728 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0854-2540_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 51 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 458 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.861994Jy sigma=0.026142 ! Fit after self-cal, rms=0.835304Jy sigma=0.026098 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.964 mas, bmaj=6.635 mas, bpa=-9.349 degrees ! Estimated noise=1475.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0991798 Jy ! Component: 100 - total flux cleaned = 0.151996 Jy ! Total flux subtracted in 100 components = 0.151996 Jy ! Clean residual min=-0.019828 max=0.029432 Jy/beam ! Clean residual mean=0.000129 rms=0.007378 Jy/beam ! Combined flux in latest and established models = 0.151996 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.151996 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195881Jy sigma=0.003225 ! Fit after self-cal, rms=0.195379Jy sigma=0.003223 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.671 mas, bmaj=8.52 mas, bpa=-1.956 degrees ! Estimated noise=853.008 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0444097 Jy ! Component: 100 - total flux cleaned = 0.0685253 Jy ! Component: 150 - total flux cleaned = 0.0817123 Jy ! Component: 200 - total flux cleaned = 0.0884927 Jy ! Total flux subtracted in 200 components = 0.0884927 Jy ! Clean residual min=-0.027260 max=0.053137 Jy/beam ! Clean residual mean=-0.000034 rms=0.012441 Jy/beam ! Combined flux in latest and established models = 0.240488 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 52 components and 0.240488 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165508Jy sigma=0.004560 ! Fit after self-cal, rms=0.165269Jy sigma=0.004560 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.71 HN 1.21 KP 0.76 ! LA 0.76 MK 1.31 NL 0.97 OV 0.85 ! PT 0.80 SC 1.28 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 33.44 FD 0.74 HN 1.23 KP 0.76 ! LA 0.73 MK 1.33 NL 1.10 OV 0.86 ! PT 0.78 SC 1.24 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.73 FD 0.78 HN 1.35 KP 0.75 ! LA 0.75 MK 1.03 NL 1.04 OV 0.79 ! PT 0.78 SC 1.23 ! ! ! Correcting IF 4. ! A total of 42 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.78 HN 1.18 KP 1.00* ! LA 0.73 MK 0.83 NL 1.00* OV 1.00* ! PT 0.83 SC 1.00* ! ! ! Fit before self-cal, rms=0.165269Jy sigma=0.004560 ! Fit after self-cal, rms=1.564093Jy sigma=0.000746 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.94 mas, bmaj=9.596 mas, bpa=-1.399 degrees ! Estimated noise=996.184 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00643561 Jy ! Component: 100 - total flux cleaned = 0.00760751 Jy ! Component: 150 - total flux cleaned = 0.00781091 Jy ! Component: 200 - total flux cleaned = 0.00790626 Jy ! Total flux subtracted in 200 components = 0.00790626 Jy ! Clean residual min=-0.008942 max=0.008321 Jy/beam ! Clean residual mean=0.000015 rms=0.002365 Jy/beam ! Combined flux in latest and established models = 0.248394 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 59 components and 0.248394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.563470Jy sigma=0.000746 ! Fit after self-cal, rms=1.564461Jy sigma=0.000736 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.564461Jy sigma=0.000736 ! Fit after self-cal, rms=1.137248Jy sigma=0.000717 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.716 mas, bmaj=9.476 mas, bpa=-2.123 degrees ! Estimated noise=952.956 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044453 Jy ! Component: 100 - total flux cleaned = 0.00530661 Jy ! Component: 150 - total flux cleaned = 0.0056039 Jy ! Component: 200 - total flux cleaned = 0.00573502 Jy ! Total flux subtracted in 200 components = 0.00573502 Jy ! Clean residual min=-0.005526 max=0.006819 Jy/beam ! Clean residual mean=0.000017 rms=0.001489 Jy/beam ! Combined flux in latest and established models = 0.254129 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 67 components and 0.254129 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.136656Jy sigma=0.000717 ! Fit after self-cal, rms=1.136658Jy sigma=0.000717 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-59.5, 52.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00491514 Jy ! Component: 100 - total flux cleaned = 0.0053445 Jy ! Component: 150 - total flux cleaned = 0.00534668 Jy ! Component: 200 - total flux cleaned = 0.00527103 Jy ! Total flux subtracted in 200 components = 0.00527103 Jy ! Clean residual min=-0.005370 max=0.004986 Jy/beam ! Clean residual mean=0.000030 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 0.2594 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 94 components and 0.2594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.136343Jy sigma=0.000715 ! Fit after self-cal, rms=1.136342Jy sigma=0.000715 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.136342Jy sigma=0.000715 ! Fit after self-cal, rms=1.179414Jy sigma=0.000714 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.655 mas, bmaj=9.318 mas, bpa=-2.836 degrees ! Estimated noise=958.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00436155 Jy ! Component: 100 - total flux cleaned = 0.0064781 Jy ! Component: 150 - total flux cleaned = 0.00710577 Jy ! Component: 200 - total flux cleaned = 0.00710638 Jy ! Total flux subtracted in 200 components = 0.00710638 Jy ! Clean residual min=-0.005594 max=0.005176 Jy/beam ! Clean residual mean=0.000028 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 0.266507 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 99 components and 0.266507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.178739Jy sigma=0.000714 ! Fit after self-cal, rms=1.178734Jy sigma=0.000714 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030822 Jy ! Component: 100 - total flux cleaned = 0.000186333 Jy ! Component: 150 - total flux cleaned = 0.000130625 Jy ! Component: 200 - total flux cleaned = 0.000130198 Jy ! Total flux subtracted in 200 components = 0.000130198 Jy ! Clean residual min=-0.005578 max=0.005036 Jy/beam ! Clean residual mean=0.000029 rms=0.001423 Jy/beam ! Combined flux in latest and established models = 0.266637 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 105 components and 0.266637 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.178595Jy sigma=0.000714 ! Fit after self-cal, rms=1.178594Jy sigma=0.000714 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.178594Jy sigma=0.000714 ! Fit after self-cal, rms=1.218777Jy sigma=0.000713 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.541 mas, bmaj=20.53 mas, bpa=-2.231 degrees ! Estimated noise=1092.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0058498 Jy ! Component: 100 - total flux cleaned = 0.00636926 Jy ! Component: 150 - total flux cleaned = 0.00699838 Jy ! Component: 200 - total flux cleaned = 0.00713566 Jy ! Total flux subtracted in 200 components = 0.00713566 Jy ! Clean residual min=-0.007655 max=0.006503 Jy/beam ! Clean residual mean=0.000051 rms=0.002155 Jy/beam ! Combined flux in latest and established models = 0.273773 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 120 components and 0.273773 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.217852Jy sigma=0.000715 ! Fit after self-cal, rms=1.217841Jy sigma=0.000715 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.63853e-05 Jy ! Component: 100 - total flux cleaned = -0.000142436 Jy ! Component: 150 - total flux cleaned = -0.000199952 Jy ! Component: 200 - total flux cleaned = -0.000200365 Jy ! Total flux subtracted in 200 components = -0.000200365 Jy ! Clean residual min=-0.007509 max=0.006398 Jy/beam ! Clean residual mean=0.000051 rms=0.002131 Jy/beam ! Combined flux in latest and established models = 0.273572 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 124 components and 0.273572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.217726Jy sigma=0.000716 ! Fit after self-cal, rms=1.217721Jy sigma=0.000716 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.615 mas, bmaj=9.174 mas, bpa=-3.645 degrees ! Estimated noise=971.546 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.615 x 9.174 at -3.645 degrees (North through East) ! Clean map min=-0.0057246 max=0.11821 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.882 mas, bmaj=7.275 mas, bpa=-8.79 degrees ! Estimated noise=1600.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.107994 Jy ! Component: 100 - total flux cleaned = 0.167297 Jy ! Component: 150 - total flux cleaned = 0.202817 Jy ! Component: 200 - total flux cleaned = 0.22483 Jy ! Total flux subtracted in 200 components = 0.22483 Jy ! Clean residual min=-0.007141 max=0.013765 Jy/beam ! Clean residual mean=0.000035 rms=0.002287 Jy/beam ! Combined flux in latest and established models = 0.22483 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 68 model components to the UV plane model. ! The established model now contains 68 components and 0.22483 Jy ! Inverting map and beam ! Estimated beam: bmin=3.615 mas, bmaj=9.174 mas, bpa=-3.645 degrees ! Estimated noise=971.546 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203388 Jy ! Component: 100 - total flux cleaned = 0.0312381 Jy ! Component: 150 - total flux cleaned = 0.0381689 Jy ! Component: 200 - total flux cleaned = 0.0428894 Jy ! Total flux subtracted in 200 components = 0.0428894 Jy ! Clean residual min=-0.005769 max=0.006343 Jy/beam ! Clean residual mean=0.000012 rms=0.001455 Jy/beam ! Combined flux in latest and established models = 0.267719 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 111 components and 0.267719 Jy ! Inverting map ! Added new window around map position (5.5, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0053198 Jy ! Component: 100 - total flux cleaned = 0.00655056 Jy ! Component: 150 - total flux cleaned = 0.00677907 Jy ! Component: 200 - total flux cleaned = 0.00667477 Jy ! Total flux subtracted in 200 components = 0.00667477 Jy ! Clean residual min=-0.005484 max=0.004612 Jy/beam ! Clean residual mean=0.000021 rms=0.001350 Jy/beam ! Combined flux in latest and established models = 0.274394 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 139 components and 0.274394 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.541 mas, bmaj=20.53 mas, bpa=-2.231 degrees ! Estimated noise=1092.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00136708 Jy ! Component: 100 - total flux cleaned = -0.00150774 Jy ! Component: 150 - total flux cleaned = -0.00175322 Jy ! Component: 200 - total flux cleaned = -0.00210052 Jy ! Total flux subtracted in 200 components = -0.00210052 Jy ! Clean residual min=-0.007231 max=0.005745 Jy/beam ! Clean residual mean=0.000030 rms=0.001889 Jy/beam ! Combined flux in latest and established models = 0.272294 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000336549 Jy ! Component: 100 - total flux cleaned = -0.000655999 Jy ! Component: 150 - total flux cleaned = -0.00096648 Jy ! Component: 200 - total flux cleaned = -0.00126374 Jy ! Total flux subtracted in 200 components = -0.00126374 Jy ! Clean residual min=-0.006903 max=0.005487 Jy/beam ! Clean residual mean=0.000024 rms=0.001809 Jy/beam ! Combined flux in latest and established models = 0.27103 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 164 components and 0.27103 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.615 mas, bmaj=9.174 mas, bpa=-3.645 degrees ! Estimated noise=971.546 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.44975e-06 Jy ! Component: 100 - total flux cleaned = -7.46023e-05 Jy ! Component: 150 - total flux cleaned = -7.1774e-05 Jy ! Component: 200 - total flux cleaned = -7.18475e-05 Jy ! Total flux subtracted in 200 components = -7.18475e-05 Jy ! Clean residual min=-0.004934 max=0.004583 Jy/beam ! Clean residual mean=0.000011 rms=0.001212 Jy/beam ! Combined flux in latest and established models = 0.270958 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 188 components and 0.270958 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.216655Jy sigma=0.000714 ! Fit after self-cal, rms=1.216623Jy sigma=0.000713 wmodel J0854-2540_S_2017_05_27_pus_map.mod ! Writing 188 model components to file: J0854-2540_S_2017_05_27_pus_map.mod wobs J0854-2540_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0854-2540_S_2017_05_27_pus_uvs.fits wwins J0854-2540_S_2017_05_27_pus_map.win ! wwins: Wrote 4 windows to J0854-2540_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000336739 Jy ! Component: 100 - total flux cleaned = 0.000486312 Jy ! Component: 150 - total flux cleaned = 0.000628247 Jy ! Component: 200 - total flux cleaned = 0.000963686 Jy ! Component: 250 - total flux cleaned = 0.00154218 Jy ! Component: 300 - total flux cleaned = 0.00191524 Jy ! Component: 350 - total flux cleaned = 0.00251868 Jy ! Component: 400 - total flux cleaned = 0.00287057 Jy ! Component: 450 - total flux cleaned = 0.0033265 Jy ! Component: 500 - total flux cleaned = 0.00365904 Jy ! Component: 550 - total flux cleaned = 0.00403819 Jy ! Component: 600 - total flux cleaned = 0.00440673 Jy ! Component: 650 - total flux cleaned = 0.00461187 Jy ! Component: 700 - total flux cleaned = 0.00496551 Jy ! Component: 750 - total flux cleaned = 0.00531109 Jy ! Component: 800 - total flux cleaned = 0.005408 Jy ! Component: 850 - total flux cleaned = 0.0056942 Jy ! Component: 900 - total flux cleaned = 0.00592808 Jy ! Component: 950 - total flux cleaned = 0.00602026 Jy ! Component: 1000 - total flux cleaned = 0.00620135 Jy ! Component: 1050 - total flux cleaned = 0.00637839 Jy ! Component: 1100 - total flux cleaned = 0.00642178 Jy ! Component: 1150 - total flux cleaned = 0.00650863 Jy ! Component: 1200 - total flux cleaned = 0.00650888 Jy ! Component: 1250 - total flux cleaned = 0.00654986 Jy ! Component: 1300 - total flux cleaned = 0.00654998 Jy ! Component: 1350 - total flux cleaned = 0.00659044 Jy ! Component: 1400 - total flux cleaned = 0.00666974 Jy ! Component: 1450 - total flux cleaned = 0.00674785 Jy ! Component: 1500 - total flux cleaned = 0.00694053 Jy ! Component: 1550 - total flux cleaned = 0.00682664 Jy ! Component: 1600 - total flux cleaned = 0.00705186 Jy ! Component: 1650 - total flux cleaned = 0.0070892 Jy ! Component: 1700 - total flux cleaned = 0.00727164 Jy ! Component: 1750 - total flux cleaned = 0.00734443 Jy ! Component: 1800 - total flux cleaned = 0.00741565 Jy ! Component: 1850 - total flux cleaned = 0.00762623 Jy ! Component: 1900 - total flux cleaned = 0.00766045 Jy ! Component: 1950 - total flux cleaned = 0.00772902 Jy ! Component: 2000 - total flux cleaned = 0.0078986 Jy ! Component: 2050 - total flux cleaned = 0.00803259 Jy ! Component: 2100 - total flux cleaned = 0.00803236 Jy ! Component: 2150 - total flux cleaned = 0.00822955 Jy ! Component: 2200 - total flux cleaned = 0.00819723 Jy ! Component: 2250 - total flux cleaned = 0.00845517 Jy ! Component: 2300 - total flux cleaned = 0.00858279 Jy ! Component: 2350 - total flux cleaned = 0.00877247 Jy ! Component: 2400 - total flux cleaned = 0.00877221 Jy ! Component: 2450 - total flux cleaned = 0.0088341 Jy ! Component: 2500 - total flux cleaned = 0.00892624 Jy ! Component: 2550 - total flux cleaned = 0.00898706 Jy ! Component: 2600 - total flux cleaned = 0.00910755 Jy ! Component: 2650 - total flux cleaned = 0.0091374 Jy ! Component: 2700 - total flux cleaned = 0.00916688 Jy ! Component: 2750 - total flux cleaned = 0.00907925 Jy ! Component: 2800 - total flux cleaned = 0.00913773 Jy ! Component: 2850 - total flux cleaned = 0.009253 Jy ! Component: 2900 - total flux cleaned = 0.00928151 Jy ! Component: 2950 - total flux cleaned = 0.00925304 Jy ! Component: 3000 - total flux cleaned = 0.00930945 Jy ! Component: 3050 - total flux cleaned = 0.00916982 Jy ! Component: 3100 - total flux cleaned = 0.00917006 Jy ! Component: 3150 - total flux cleaned = 0.00917055 Jy ! Component: 3200 - total flux cleaned = 0.00919794 Jy ! Component: 3250 - total flux cleaned = 0.00925243 Jy ! Component: 3300 - total flux cleaned = 0.00933328 Jy ! Component: 3350 - total flux cleaned = 0.00930636 Jy ! Component: 3400 - total flux cleaned = 0.00920065 Jy ! Component: 3450 - total flux cleaned = 0.00917452 Jy ! Component: 3500 - total flux cleaned = 0.00914812 Jy ! Component: 3550 - total flux cleaned = 0.00912205 Jy ! Component: 3600 - total flux cleaned = 0.00914781 Jy ! Component: 3650 - total flux cleaned = 0.00909665 Jy ! Component: 3700 - total flux cleaned = 0.00909653 Jy ! Component: 3750 - total flux cleaned = 0.00904606 Jy ! Component: 3800 - total flux cleaned = 0.00909601 Jy ! Component: 3850 - total flux cleaned = 0.00897127 Jy ! Component: 3900 - total flux cleaned = 0.00899609 Jy ! Component: 3950 - total flux cleaned = 0.00894679 Jy ! Component: 4000 - total flux cleaned = 0.00892225 Jy ! Component: 4050 - total flux cleaned = 0.00884954 Jy ! Total flux subtracted in 4096 components = 0.00892179 Jy ! Clean residual min=-0.001424 max=0.001508 Jy/beam ! Clean residual mean=0.000017 rms=0.000469 Jy/beam ! Combined flux in latest and established models = 0.27988 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 473 components and 0.27988 Jy ![Exited script file: muppet] wmap "J0854-2540_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.615 x 9.174 at -3.645 degrees (North through East) ! Clean map min=-0.0038604 max=0.12793 Jy/beam ! Writing clean map to FITS file: J0854-2540_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.127933 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00046333 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.08649 1.08649 2.17299 4.34598 8.69196 17.3839 34.7678 69.5356 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0013 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.127 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.615 x 9.174 at -3.645 degrees (North through East) ! Clean map min=-0.0038604 max=0.12793 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0854-2540_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:02:58 2019