! Started logfile: J0854+2006_X_2017_08_12_pus_uvs.log on Fri May 10 15:21:46 2019 obs J0854+2006_X_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0854+2006_X_2017_08_12_pus_uva.fits ! AN table 1: 62 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.539785 visibilities/baseline/integration-bin. ! Found source: J0854+2006 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1049 lines of history. ! ! Reading 18072 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0854+2006_X_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 260 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=4.107803Jy sigma=0.034277 ! Fit after self-cal, rms=4.099802Jy sigma=0.034251 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.7018 mas, bmaj=1.623 mas, bpa=0.09705 degrees ! Estimated noise=899.393 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.77805 Jy ! Component: 100 - total flux cleaned = 4.68612 Jy ! Total flux subtracted in 100 components = 4.68612 Jy ! Clean residual min=-0.091563 max=0.372277 Jy/beam ! Clean residual mean=0.000038 rms=0.028827 Jy/beam ! Combined flux in latest and established models = 4.68612 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 4.68612 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.691861Jy sigma=0.005823 ! Fit after self-cal, rms=0.691609Jy sigma=0.005821 ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.40214 Jy ! Component: 100 - total flux cleaned = 0.606007 Jy ! Total flux subtracted in 100 components = 0.606007 Jy ! Clean residual min=-0.050870 max=0.134345 Jy/beam ! Clean residual mean=-0.000044 rms=0.012622 Jy/beam ! Combined flux in latest and established models = 5.29212 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 9 components and 5.29212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.320381Jy sigma=0.002640 ! Fit after self-cal, rms=0.320027Jy sigma=0.002637 ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Added new window around map position (-1.2, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.13423 Jy ! Component: 100 - total flux cleaned = 0.213515 Jy ! Total flux subtracted in 100 components = 0.213515 Jy ! Clean residual min=-0.037601 max=0.053744 Jy/beam ! Clean residual mean=-0.000063 rms=0.008938 Jy/beam ! Combined flux in latest and established models = 5.50564 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 19 components and 5.50564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.236859Jy sigma=0.001910 ! Fit after self-cal, rms=0.232885Jy sigma=0.001874 ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0614627 Jy ! Component: 100 - total flux cleaned = 0.10212 Jy ! Total flux subtracted in 100 components = 0.10212 Jy ! Clean residual min=-0.033872 max=0.041143 Jy/beam ! Clean residual mean=-0.000070 rms=0.007624 Jy/beam ! Combined flux in latest and established models = 5.60776 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 32 components and 5.60776 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.210940Jy sigma=0.001678 ! Fit after self-cal, rms=0.209811Jy sigma=0.001667 ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.8865 mas, bmaj=1.855 mas, bpa=0.999 degrees ! Estimated noise=644.838 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0419395 Jy ! Component: 100 - total flux cleaned = 0.0666949 Jy ! Component: 150 - total flux cleaned = 0.0825835 Jy ! Component: 200 - total flux cleaned = 0.0889541 Jy ! Total flux subtracted in 200 components = 0.0889541 Jy ! Clean residual min=-0.034675 max=0.039620 Jy/beam ! Clean residual mean=-0.000063 rms=0.007593 Jy/beam ! Combined flux in latest and established models = 5.69671 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 43 components and 5.69671 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.200817Jy sigma=0.001589 ! Fit after self-cal, rms=0.200057Jy sigma=0.001580 ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 1.03 KP 1.01 ! LA 0.98 MK 0.99 NL 0.99 OV 1.01 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.99 HN 0.99 KP 1.03 ! LA 0.98 MK 0.98 NL 0.98 OV 1.01 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.00 KP 0.96 ! LA 1.00 MK 1.00 NL 0.98 OV 1.02 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 1.03 KP 1.00 ! LA 1.01 MK 1.00 NL 0.98 OV 1.01 ! PT 1.02 SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 0.99 KP 0.99 ! LA 0.99 MK 1.02 NL 0.99 OV 1.01 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.02 KP 0.99 ! LA 1.00 MK 1.00 NL 0.99 OV 1.01 ! PT 0.99 SC 1.02 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.00 KP 1.00 ! LA 1.00 MK 1.01 NL 0.98 OV 1.01 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.01 KP 1.00 ! LA 0.98 MK 1.00 NL 0.98 OV 1.01 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.97 HN 1.01 KP 1.00 ! LA 1.00 MK 0.98 NL 0.98 OV 1.02 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.97 HN 1.01 KP 0.99 ! LA 1.01 MK 1.01 NL 0.98 OV 1.01 ! PT 1.01 SC 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.04 KP 1.00 ! LA 1.01 MK 0.99 NL 0.98 OV 1.02 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.00 KP 0.97 ! LA 0.99 MK 1.00 NL 0.97 OV 1.02 ! PT 1.02 SC 1.01 ! ! ! Fit before self-cal, rms=0.200057Jy sigma=0.001580 ! Fit after self-cal, rms=0.166516Jy sigma=0.001260 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.889 mas, bmaj=1.858 mas, bpa=0.8284 degrees ! Estimated noise=644.817 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.2, -1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024587 Jy ! Component: 100 - total flux cleaned = 0.0330884 Jy ! Component: 150 - total flux cleaned = 0.0364018 Jy ! Component: 200 - total flux cleaned = 0.0391567 Jy ! Total flux subtracted in 200 components = 0.0391567 Jy ! Clean residual min=-0.023529 max=0.021431 Jy/beam ! Clean residual mean=-0.000089 rms=0.005251 Jy/beam ! Combined flux in latest and established models = 5.73587 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 64 components and 5.73587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.155922Jy sigma=0.001170 ! Fit after self-cal, rms=0.154781Jy sigma=0.001159 ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.154781Jy sigma=0.001159 ! Fit after self-cal, rms=0.107273Jy sigma=0.000843 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.8894 mas, bmaj=1.858 mas, bpa=0.8577 degrees ! Estimated noise=644.718 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00708354 Jy ! Component: 100 - total flux cleaned = 0.0124449 Jy ! Component: 150 - total flux cleaned = 0.015891 Jy ! Component: 200 - total flux cleaned = 0.0191394 Jy ! Total flux subtracted in 200 components = 0.0191394 Jy ! Clean residual min=-0.013191 max=0.010370 Jy/beam ! Clean residual mean=-0.000025 rms=0.002273 Jy/beam ! Combined flux in latest and established models = 5.75501 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 80 components and 5.75501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.102836Jy sigma=0.000805 ! Fit after self-cal, rms=0.102482Jy sigma=0.000802 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00382353 Jy ! Component: 100 - total flux cleaned = 0.00738618 Jy ! Component: 150 - total flux cleaned = 0.00957017 Jy ! Component: 200 - total flux cleaned = 0.0110378 Jy ! Total flux subtracted in 200 components = 0.0110378 Jy ! Clean residual min=-0.013100 max=0.007905 Jy/beam ! Clean residual mean=-0.000012 rms=0.002063 Jy/beam ! Combined flux in latest and established models = 5.76605 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 86 components and 5.76605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100798Jy sigma=0.000788 ! Fit after self-cal, rms=0.100654Jy sigma=0.000786 ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100654Jy sigma=0.000786 ! Fit after self-cal, rms=0.098523Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.89 mas, bmaj=1.858 mas, bpa=0.8057 degrees ! Estimated noise=644.858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.34592e-06 Jy ! Component: 100 - total flux cleaned = 0.0018769 Jy ! Component: 150 - total flux cleaned = 0.003918 Jy ! Component: 200 - total flux cleaned = 0.0050273 Jy ! Total flux subtracted in 200 components = 0.0050273 Jy ! Clean residual min=-0.010365 max=0.007249 Jy/beam ! Clean residual mean=-0.000008 rms=0.001727 Jy/beam ! Combined flux in latest and established models = 5.77108 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 92 components and 5.77108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096865Jy sigma=0.000756 ! Fit after self-cal, rms=0.096767Jy sigma=0.000755 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240785 Jy ! Component: 100 - total flux cleaned = 0.00418881 Jy ! Component: 150 - total flux cleaned = 0.00521974 Jy ! Component: 200 - total flux cleaned = 0.00601428 Jy ! Total flux subtracted in 200 components = 0.00601428 Jy ! Clean residual min=-0.010286 max=0.006681 Jy/beam ! Clean residual mean=-0.000000 rms=0.001636 Jy/beam ! Combined flux in latest and established models = 5.77709 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 98 components and 5.77709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096078Jy sigma=0.000749 ! Fit after self-cal, rms=0.096031Jy sigma=0.000748 ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.096031Jy sigma=0.000748 ! Fit after self-cal, rms=0.095446Jy sigma=0.000744 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=2.148 mas, bmaj=2.863 mas, bpa=-2.208 degrees ! Estimated noise=829.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00355059 Jy ! Component: 100 - total flux cleaned = 0.00422475 Jy ! Component: 150 - total flux cleaned = 0.00487615 Jy ! Component: 200 - total flux cleaned = 0.00528492 Jy ! Total flux subtracted in 200 components = 0.00528492 Jy ! Clean residual min=-0.007116 max=0.005440 Jy/beam ! Clean residual mean=0.000008 rms=0.001459 Jy/beam ! Combined flux in latest and established models = 5.78237 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 113 components and 5.78237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095035Jy sigma=0.000741 ! Fit after self-cal, rms=0.095001Jy sigma=0.000741 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164828 Jy ! Component: 100 - total flux cleaned = 0.00235564 Jy ! Component: 150 - total flux cleaned = 0.00262806 Jy ! Component: 200 - total flux cleaned = 0.00273909 Jy ! Total flux subtracted in 200 components = 0.00273909 Jy ! Clean residual min=-0.007530 max=0.004761 Jy/beam ! Clean residual mean=0.000016 rms=0.001414 Jy/beam ! Combined flux in latest and established models = 5.78511 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 119 components and 5.78511 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094855Jy sigma=0.000739 ! Fit after self-cal, rms=0.094843Jy sigma=0.000739 ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.8906 mas, bmaj=1.859 mas, bpa=0.7571 degrees ! Estimated noise=645.072 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8906 x 1.859 at 0.7571 degrees (North through East) ! Clean map min=-0.0086221 max=4.9847 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094843Jy sigma=0.000739 ! Fit after self-cal, rms=0.085867Jy sigma=0.000663 ! Inverting map and beam ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.8907 mas, bmaj=1.859 mas, bpa=0.7472 degrees ! Estimated noise=644.911 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00149735 Jy ! Component: 100 - total flux cleaned = -0.00170747 Jy ! Component: 150 - total flux cleaned = -0.00154472 Jy ! Component: 200 - total flux cleaned = -0.0011193 Jy ! Total flux subtracted in 200 components = -0.0011193 Jy ! Clean residual min=-0.008304 max=0.005651 Jy/beam ! Clean residual mean=0.000006 rms=0.001389 Jy/beam ! Combined flux in latest and established models = 5.78399 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 123 components and 5.78399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085071Jy sigma=0.000656 ! Fit after self-cal, rms=0.085056Jy sigma=0.000656 ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133634 Jy ! Component: 100 - total flux cleaned = 0.00171061 Jy ! Component: 150 - total flux cleaned = 0.0019405 Jy ! Component: 200 - total flux cleaned = 0.00205239 Jy ! Total flux subtracted in 200 components = 0.00205239 Jy ! Clean residual min=-0.008181 max=0.005431 Jy/beam ! Clean residual mean=0.000008 rms=0.001360 Jy/beam ! Combined flux in latest and established models = 5.78605 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 132 components and 5.78605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084749Jy sigma=0.000654 ! Fit after self-cal, rms=0.084742Jy sigma=0.000653 ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084742Jy sigma=0.000653 ! Fit after self-cal, rms=0.084424Jy sigma=0.000651 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.7053 mas, bmaj=1.628 mas, bpa=-0.1832 degrees ! Estimated noise=901.591 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.78627 Jy ! Component: 100 - total flux cleaned = 4.68189 Jy ! Component: 150 - total flux cleaned = 5.06404 Jy ! Component: 200 - total flux cleaned = 5.27466 Jy ! Total flux subtracted in 200 components = 5.27466 Jy ! Clean residual min=-0.035370 max=0.108107 Jy/beam ! Clean residual mean=-0.000016 rms=0.010367 Jy/beam ! Combined flux in latest and established models = 5.27466 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 5.27466 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.8912 mas, bmaj=1.86 mas, bpa=0.7095 degrees ! Estimated noise=645.055 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.176903 Jy ! Component: 100 - total flux cleaned = 0.27139 Jy ! Component: 150 - total flux cleaned = 0.332891 Jy ! Component: 200 - total flux cleaned = 0.376302 Jy ! Total flux subtracted in 200 components = 0.376302 Jy ! Clean residual min=-0.011863 max=0.024785 Jy/beam ! Clean residual mean=-0.000152 rms=0.003984 Jy/beam ! Combined flux in latest and established models = 5.65097 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 43 components and 5.65096 Jy ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0321633 Jy ! Component: 100 - total flux cleaned = 0.0562061 Jy ! Component: 150 - total flux cleaned = 0.0743282 Jy ! Component: 200 - total flux cleaned = 0.0882359 Jy ! Total flux subtracted in 200 components = 0.0882359 Jy ! Clean residual min=-0.007122 max=0.009925 Jy/beam ! Clean residual mean=-0.000047 rms=0.001923 Jy/beam ! Combined flux in latest and established models = 5.7392 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 58 components and 5.7392 Jy ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Added new window around map position (-1.4, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0112939 Jy ! Component: 100 - total flux cleaned = 0.0201445 Jy ! Component: 150 - total flux cleaned = 0.0273661 Jy ! Component: 200 - total flux cleaned = 0.0326544 Jy ! Total flux subtracted in 200 components = 0.0326544 Jy ! Clean residual min=-0.007155 max=0.006380 Jy/beam ! Clean residual mean=-0.000009 rms=0.001509 Jy/beam ! Combined flux in latest and established models = 5.77185 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 75 components and 5.77185 Jy ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=2.148 mas, bmaj=2.864 mas, bpa=-2.282 degrees ! Estimated noise=828.777 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00708425 Jy ! Component: 100 - total flux cleaned = 0.0107048 Jy ! Component: 150 - total flux cleaned = 0.0120502 Jy ! Component: 200 - total flux cleaned = 0.0128189 Jy ! Total flux subtracted in 200 components = 0.0128189 Jy ! Clean residual min=-0.006427 max=0.004907 Jy/beam ! Clean residual mean=0.000017 rms=0.001270 Jy/beam ! Combined flux in latest and established models = 5.78467 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000724475 Jy ! Component: 100 - total flux cleaned = 0.000917401 Jy ! Component: 150 - total flux cleaned = 0.00103735 Jy ! Component: 200 - total flux cleaned = 0.00120581 Jy ! Total flux subtracted in 200 components = 0.00120581 Jy ! Clean residual min=-0.006528 max=0.004706 Jy/beam ! Clean residual mean=0.000021 rms=0.001246 Jy/beam ! Combined flux in latest and established models = 5.78588 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 100 components and 5.78588 Jy ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! Estimated beam: bmin=0.8912 mas, bmaj=1.86 mas, bpa=0.7095 degrees ! Estimated noise=645.055 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000733362 Jy ! Component: 100 - total flux cleaned = -0.000736933 Jy ! Component: 150 - total flux cleaned = -0.000408437 Jy ! Component: 200 - total flux cleaned = -0.000106453 Jy ! Total flux subtracted in 200 components = -0.000106453 Jy ! Clean residual min=-0.007559 max=0.005336 Jy/beam ! Clean residual mean=0.000009 rms=0.001371 Jy/beam ! Combined flux in latest and established models = 5.78577 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 108 components and 5.78577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085994Jy sigma=0.000663 ! Fit after self-cal, rms=0.085706Jy sigma=0.000661 wmodel J0854+2006_X_2017_08_12_pus_map.mod ! Writing 108 model components to file: J0854+2006_X_2017_08_12_pus_map.mod wobs J0854+2006_X_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0854+2006_X_2017_08_12_pus_uvs.fits wwins J0854+2006_X_2017_08_12_pus_map.win ! wwins: Wrote 4 windows to J0854+2006_X_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00309672 Jy ! Component: 100 - total flux cleaned = -0.0054408 Jy ! Component: 150 - total flux cleaned = -0.00652863 Jy ! Component: 200 - total flux cleaned = -0.00747401 Jy ! Component: 250 - total flux cleaned = -0.00838828 Jy ! Component: 300 - total flux cleaned = -0.00909896 Jy ! Component: 350 - total flux cleaned = -0.00927211 Jy ! Component: 400 - total flux cleaned = -0.00935659 Jy ! Component: 450 - total flux cleaned = -0.00952275 Jy ! Component: 500 - total flux cleaned = -0.00968403 Jy ! Component: 550 - total flux cleaned = -0.00976304 Jy ! Component: 600 - total flux cleaned = -0.00991947 Jy ! Component: 650 - total flux cleaned = -0.0101505 Jy ! Component: 700 - total flux cleaned = -0.0102267 Jy ! Component: 750 - total flux cleaned = -0.010376 Jy ! Component: 800 - total flux cleaned = -0.0104497 Jy ! Component: 850 - total flux cleaned = -0.0107386 Jy ! Component: 900 - total flux cleaned = -0.0107379 Jy ! Component: 950 - total flux cleaned = -0.0110206 Jy ! Component: 1000 - total flux cleaned = -0.011576 Jy ! Component: 1050 - total flux cleaned = -0.0115048 Jy ! Component: 1100 - total flux cleaned = -0.0117096 Jy ! Component: 1150 - total flux cleaned = -0.0119114 Jy ! Component: 1200 - total flux cleaned = -0.0122433 Jy ! Component: 1250 - total flux cleaned = -0.0123088 Jy ! Component: 1300 - total flux cleaned = -0.012438 Jy ! Component: 1350 - total flux cleaned = -0.0128856 Jy ! Component: 1400 - total flux cleaned = -0.0131387 Jy ! Component: 1450 - total flux cleaned = -0.013202 Jy ! Component: 1500 - total flux cleaned = -0.0135113 Jy ! Component: 1550 - total flux cleaned = -0.0136944 Jy ! Component: 1600 - total flux cleaned = -0.0139968 Jy ! Component: 1650 - total flux cleaned = -0.0140563 Jy ! Component: 1700 - total flux cleaned = -0.0142934 Jy ! Component: 1750 - total flux cleaned = -0.0144697 Jy ! Component: 1800 - total flux cleaned = -0.0145861 Jy ! Component: 1850 - total flux cleaned = -0.014759 Jy ! Component: 1900 - total flux cleaned = -0.0150438 Jy ! Component: 1950 - total flux cleaned = -0.0151569 Jy ! Component: 2000 - total flux cleaned = -0.0153254 Jy ! Total flux subtracted in 2048 components = -0.0156589 Jy ! Clean residual min=-0.002909 max=0.002817 Jy/beam ! Clean residual mean=0.000003 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 5.77011 Jy keep ! Adding 141 model components to the UV plane model. ! The established model now contains 248 components and 5.77011 Jy ![Exited script file: muppet] wmap "J0854+2006_X_2017_08_12_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8912 x 1.86 at 0.7095 degrees (North through East) ! Clean map min=-0.0055845 max=4.9875 Jy/beam ! Writing clean map to FITS file: J0854+2006_X_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 4.98751 invert ! Inverting map ! Your choice of large map pixels excluded 0.101% of the data. ! The x-axis pixel size should ideally be below 0.1991 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000966398 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0581291 0.0581291 0.116258 0.232516 0.465033 0.930065 1.86013 3.72026 7.44052 14.881 29.7621 59.5242 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0028 print "peak=",int(1000*peak_flux)/1000 ! peak= 4.987 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8912 x 1.86 at 0.7095 degrees (North through East) ! Clean map min=-0.0055845 max=4.9875 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0854+2006_X_2017_08_12_pus_uvs.log closed on Fri May 10 15:21:48 2019