! Started logfile: J0854+2006_X_2017_07_16_pus_uvs.log on Thu May 9 14:03:18 2019 obs J0854+2006_X_2017_07_16_pus_uva.fits ! Reading UV FITS file: J0854+2006_X_2017_07_16_pus_uva.fits ! AN table 1: 30 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.661481 visibilities/baseline/integration-bin. ! Found source: J0854+2006 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1200 lines of history. ! ! Reading 10716 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0854+2006_X_2017_07_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 56 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=4.975965Jy sigma=0.041317 ! Fit after self-cal, rms=4.960743Jy sigma=0.041198 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.6953 mas, bmaj=1.58 mas, bpa=-1.523 degrees ! Estimated noise=1212.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.51365 Jy ! Component: 100 - total flux cleaned = 5.53326 Jy ! Total flux subtracted in 100 components = 5.53326 Jy ! Clean residual min=-0.114033 max=0.366292 Jy/beam ! Clean residual mean=-0.000882 rms=0.037133 Jy/beam ! Combined flux in latest and established models = 5.53326 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 5.53326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.714954Jy sigma=0.006018 ! Fit after self-cal, rms=0.714795Jy sigma=0.006017 ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.393802 Jy ! Component: 100 - total flux cleaned = 0.597767 Jy ! Total flux subtracted in 100 components = 0.597767 Jy ! Clean residual min=-0.079390 max=0.127501 Jy/beam ! Clean residual mean=-0.000354 rms=0.019288 Jy/beam ! Combined flux in latest and established models = 6.13103 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 11 components and 6.13103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.385974Jy sigma=0.003106 ! Fit after self-cal, rms=0.385617Jy sigma=0.003104 ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Added new window around map position (-1.2, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.136262 Jy ! Component: 100 - total flux cleaned = 0.226549 Jy ! Total flux subtracted in 100 components = 0.226549 Jy ! Clean residual min=-0.073015 max=0.068229 Jy/beam ! Clean residual mean=-0.000168 rms=0.015532 Jy/beam ! Combined flux in latest and established models = 6.35757 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 17 components and 6.35758 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.310760Jy sigma=0.002416 ! Fit after self-cal, rms=0.308651Jy sigma=0.002398 ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.8236 mas, bmaj=1.785 mas, bpa=-0.1285 degrees ! Estimated noise=838.357 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0996536 Jy ! Component: 100 - total flux cleaned = 0.160375 Jy ! Component: 150 - total flux cleaned = 0.201534 Jy ! Component: 200 - total flux cleaned = 0.230141 Jy ! Total flux subtracted in 200 components = 0.230141 Jy ! Clean residual min=-0.053891 max=0.051119 Jy/beam ! Clean residual mean=0.000084 rms=0.013170 Jy/beam ! Combined flux in latest and established models = 6.58772 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 42 components and 6.58772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.272860Jy sigma=0.002057 ! Fit after self-cal, rms=0.270853Jy sigma=0.002038 ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.00 KP 1.00 ! LA 0.97 MK 0.99 NL 0.99 OV 1.02 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.03 KP 1.04 ! LA 0.97 MK 0.99 NL 0.98 OV 1.01 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.04 KP 0.97 ! LA 1.00 MK 1.01 NL 0.99 OV 1.01 ! PT 0.99 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.02 KP 1.00 ! LA 1.00 MK 1.01 NL 0.98 OV 1.01 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.96 KP 0.99 ! LA 0.98 MK 1.02 NL 0.98 OV 1.01 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.00 KP 1.00 ! LA 0.99 MK 1.01 NL 0.99 OV 1.01 ! PT 0.99 SC 1.04 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.00 KP 1.00 ! LA 0.99 MK 1.01 NL 0.99 OV 1.01 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.00 KP 1.00 ! LA 0.97 MK 1.00 NL 0.98 OV 1.01 ! PT 1.01 SC 1.05 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.00 KP 0.99 ! LA 0.98 MK 0.98 NL 0.97 OV 1.01 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.03 KP 0.98 ! LA 1.00 MK 1.01 NL 0.98 OV 1.01 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.01 KP 0.96 ! LA 1.00 MK 0.99 NL 0.98 OV 1.02 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 0.98 KP 1.01 ! LA 0.98 MK 0.97 NL 0.98 OV 1.01 ! PT 1.01 SC 1.03 ! ! ! Fit before self-cal, rms=0.270853Jy sigma=0.002038 ! Fit after self-cal, rms=0.214599Jy sigma=0.001600 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.8281 mas, bmaj=1.791 mas, bpa=-0.4119 degrees ! Estimated noise=836.935 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0155182 Jy ! Component: 100 - total flux cleaned = -0.0139244 Jy ! Component: 150 - total flux cleaned = -0.0124185 Jy ! Component: 200 - total flux cleaned = -0.0105678 Jy ! Total flux subtracted in 200 components = -0.0105678 Jy ! Clean residual min=-0.039814 max=0.043733 Jy/beam ! Clean residual mean=0.000194 rms=0.010097 Jy/beam ! Combined flux in latest and established models = 6.57715 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 6.57715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.205555Jy sigma=0.001532 ! Fit after self-cal, rms=0.205263Jy sigma=0.001529 ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.205263Jy sigma=0.001529 ! Fit after self-cal, rms=0.121261Jy sigma=0.000939 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.8271 mas, bmaj=1.788 mas, bpa=-0.2707 degrees ! Estimated noise=836.127 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00501255 Jy ! Component: 100 - total flux cleaned = -0.00703484 Jy ! Component: 150 - total flux cleaned = -0.00705076 Jy ! Component: 200 - total flux cleaned = -0.00675252 Jy ! Total flux subtracted in 200 components = -0.00675252 Jy ! Clean residual min=-0.014178 max=0.039255 Jy/beam ! Clean residual mean=-0.000151 rms=0.004446 Jy/beam ! Combined flux in latest and established models = 6.5704 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 62 components and 6.5704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.117605Jy sigma=0.000909 ! Fit after self-cal, rms=0.117309Jy sigma=0.000906 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0315161 Jy ! Component: 100 - total flux cleaned = 0.0451554 Jy ! Component: 150 - total flux cleaned = 0.0514069 Jy ! Component: 200 - total flux cleaned = 0.0538461 Jy ! Total flux subtracted in 200 components = 0.0538461 Jy ! Clean residual min=-0.011787 max=0.013520 Jy/beam ! Clean residual mean=-0.000052 rms=0.003132 Jy/beam ! Combined flux in latest and established models = 6.62424 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 80 components and 6.62424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.108651Jy sigma=0.000827 ! Fit after self-cal, rms=0.107759Jy sigma=0.000818 ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.107759Jy sigma=0.000818 ! Fit after self-cal, rms=0.105742Jy sigma=0.000801 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.8269 mas, bmaj=1.788 mas, bpa=-0.3143 degrees ! Estimated noise=835.645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0090812 Jy ! Component: 100 - total flux cleaned = 0.0121903 Jy ! Component: 150 - total flux cleaned = 0.0147006 Jy ! Component: 200 - total flux cleaned = 0.0165861 Jy ! Total flux subtracted in 200 components = 0.0165861 Jy ! Clean residual min=-0.009634 max=0.011123 Jy/beam ! Clean residual mean=-0.000030 rms=0.002399 Jy/beam ! Combined flux in latest and established models = 6.64083 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 91 components and 6.64083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.103336Jy sigma=0.000780 ! Fit after self-cal, rms=0.103185Jy sigma=0.000779 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.4, -9.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0081513 Jy ! Component: 100 - total flux cleaned = 0.0131387 Jy ! Component: 150 - total flux cleaned = 0.0159788 Jy ! Component: 200 - total flux cleaned = 0.0176102 Jy ! Total flux subtracted in 200 components = 0.0176102 Jy ! Clean residual min=-0.008849 max=0.009222 Jy/beam ! Clean residual mean=-0.000023 rms=0.002079 Jy/beam ! Combined flux in latest and established models = 6.65844 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 104 components and 6.65844 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101591Jy sigma=0.000766 ! Fit after self-cal, rms=0.101574Jy sigma=0.000765 ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Added new window around map position (0, 22.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00589633 Jy ! Component: 100 - total flux cleaned = 0.00815292 Jy ! Component: 150 - total flux cleaned = 0.00938688 Jy ! Component: 200 - total flux cleaned = 0.00995152 Jy ! Total flux subtracted in 200 components = 0.00995152 Jy ! Clean residual min=-0.008031 max=0.007151 Jy/beam ! Clean residual mean=-0.000022 rms=0.001906 Jy/beam ! Combined flux in latest and established models = 6.66839 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 120 components and 6.66839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100533Jy sigma=0.000757 ! Fit after self-cal, rms=0.100521Jy sigma=0.000757 ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.100521Jy sigma=0.000757 ! Fit after self-cal, rms=0.100252Jy sigma=0.000754 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=1.941 mas, bmaj=2.856 mas, bpa=-3.721 degrees ! Estimated noise=1100.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00234858 Jy ! Component: 100 - total flux cleaned = 0.00216218 Jy ! Component: 150 - total flux cleaned = 0.00232372 Jy ! Component: 200 - total flux cleaned = 0.00219636 Jy ! Total flux subtracted in 200 components = 0.00219636 Jy ! Clean residual min=-0.006858 max=0.007589 Jy/beam ! Clean residual mean=-0.000037 rms=0.001957 Jy/beam ! Combined flux in latest and established models = 6.67059 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 138 components and 6.67059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099880Jy sigma=0.000751 ! Fit after self-cal, rms=0.099820Jy sigma=0.000750 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00316091 Jy ! Component: 100 - total flux cleaned = 0.003055 Jy ! Component: 150 - total flux cleaned = 0.00285581 Jy ! Component: 200 - total flux cleaned = 0.00276524 Jy ! Total flux subtracted in 200 components = 0.00276524 Jy ! Clean residual min=-0.006305 max=0.007459 Jy/beam ! Clean residual mean=-0.000018 rms=0.001766 Jy/beam ! Combined flux in latest and established models = 6.67335 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 145 components and 6.67335 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099736Jy sigma=0.000750 ! Fit after self-cal, rms=0.099728Jy sigma=0.000750 ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.8268 mas, bmaj=1.787 mas, bpa=-0.348 degrees ! Estimated noise=835.408 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8268 x 1.787 at -0.348 degrees (North through East) ! Clean map min=-0.0064969 max=5.8723 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099728Jy sigma=0.000750 ! Fit after self-cal, rms=0.082517Jy sigma=0.000636 ! Inverting map and beam ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.8268 mas, bmaj=1.788 mas, bpa=-0.3615 degrees ! Estimated noise=835.266 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00243109 Jy ! Component: 100 - total flux cleaned = -0.00276507 Jy ! Component: 150 - total flux cleaned = -0.00399889 Jy ! Component: 200 - total flux cleaned = -0.00455946 Jy ! Total flux subtracted in 200 components = -0.00455946 Jy ! Clean residual min=-0.007240 max=0.006230 Jy/beam ! Clean residual mean=0.000000 rms=0.001540 Jy/beam ! Combined flux in latest and established models = 6.66879 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 157 components and 6.66879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081793Jy sigma=0.000631 ! Fit after self-cal, rms=0.081784Jy sigma=0.000631 ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000494278 Jy ! Component: 100 - total flux cleaned = 0.000125348 Jy ! Component: 150 - total flux cleaned = 0.000127024 Jy ! Component: 200 - total flux cleaned = -9.50852e-05 Jy ! Total flux subtracted in 200 components = -9.50852e-05 Jy ! Clean residual min=-0.007268 max=0.005991 Jy/beam ! Clean residual mean=0.000002 rms=0.001493 Jy/beam ! Combined flux in latest and established models = 6.6687 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 168 components and 6.6687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081454Jy sigma=0.000628 ! Fit after self-cal, rms=0.081456Jy sigma=0.000628 ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081456Jy sigma=0.000628 ! Fit after self-cal, rms=0.081359Jy sigma=0.000627 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.6967 mas, bmaj=1.582 mas, bpa=-1.754 degrees ! Estimated noise=1210.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.50799 Jy ! Component: 100 - total flux cleaned = 5.51939 Jy ! Component: 150 - total flux cleaned = 5.8964 Jy ! Component: 200 - total flux cleaned = 6.10195 Jy ! Total flux subtracted in 200 components = 6.10195 Jy ! Clean residual min=-0.041810 max=0.107357 Jy/beam ! Clean residual mean=-0.000450 rms=0.013596 Jy/beam ! Combined flux in latest and established models = 6.10195 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 6.10195 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.8269 mas, bmaj=1.788 mas, bpa=-0.3858 degrees ! Estimated noise=835.305 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.178013 Jy ! Component: 100 - total flux cleaned = 0.277987 Jy ! Component: 150 - total flux cleaned = 0.341952 Jy ! Component: 200 - total flux cleaned = 0.387092 Jy ! Total flux subtracted in 200 components = 0.387092 Jy ! Clean residual min=-0.015271 max=0.025478 Jy/beam ! Clean residual mean=-0.000290 rms=0.005361 Jy/beam ! Combined flux in latest and established models = 6.48905 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 34 components and 6.48905 Jy ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0335806 Jy ! Component: 100 - total flux cleaned = 0.0600656 Jy ! Component: 150 - total flux cleaned = 0.0812878 Jy ! Component: 200 - total flux cleaned = 0.0986582 Jy ! Total flux subtracted in 200 components = 0.0986582 Jy ! Clean residual min=-0.011602 max=0.013411 Jy/beam ! Clean residual mean=-0.000118 rms=0.002893 Jy/beam ! Combined flux in latest and established models = 6.58771 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 65 components and 6.58771 Jy ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Added new window around map position (-1.2, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150943 Jy ! Component: 100 - total flux cleaned = 0.0273619 Jy ! Component: 150 - total flux cleaned = 0.0378548 Jy ! Component: 200 - total flux cleaned = 0.0470062 Jy ! Total flux subtracted in 200 components = 0.0470062 Jy ! Clean residual min=-0.010460 max=0.009660 Jy/beam ! Clean residual mean=-0.000054 rms=0.002103 Jy/beam ! Combined flux in latest and established models = 6.63471 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 83 components and 6.63471 Jy ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=1.941 mas, bmaj=2.857 mas, bpa=-3.768 degrees ! Estimated noise=1100.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124954 Jy ! Component: 100 - total flux cleaned = 0.0201751 Jy ! Component: 150 - total flux cleaned = 0.0258041 Jy ! Component: 200 - total flux cleaned = 0.0282236 Jy ! Total flux subtracted in 200 components = 0.0282236 Jy ! Clean residual min=-0.006273 max=0.006639 Jy/beam ! Clean residual mean=-0.000023 rms=0.001770 Jy/beam ! Combined flux in latest and established models = 6.66293 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151277 Jy ! Component: 100 - total flux cleaned = 0.0027906 Jy ! Component: 150 - total flux cleaned = 0.00331497 Jy ! Component: 200 - total flux cleaned = 0.00369689 Jy ! Total flux subtracted in 200 components = 0.00369689 Jy ! Clean residual min=-0.005832 max=0.006109 Jy/beam ! Clean residual mean=-0.000005 rms=0.001610 Jy/beam ! Combined flux in latest and established models = 6.66663 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 126 components and 6.66663 Jy ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! Estimated beam: bmin=0.8269 mas, bmaj=1.788 mas, bpa=-0.3858 degrees ! Estimated noise=835.305 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190246 Jy ! Component: 100 - total flux cleaned = 0.00260141 Jy ! Component: 150 - total flux cleaned = 0.00281496 Jy ! Component: 200 - total flux cleaned = 0.00320723 Jy ! Total flux subtracted in 200 components = 0.00320723 Jy ! Clean residual min=-0.008557 max=0.007413 Jy/beam ! Clean residual mean=0.000006 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 6.66984 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 141 components and 6.66984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083606Jy sigma=0.000644 ! Fit after self-cal, rms=0.083353Jy sigma=0.000643 wmodel J0854+2006_X_2017_07_16_pus_map.mod ! Writing 141 model components to file: J0854+2006_X_2017_07_16_pus_map.mod wobs J0854+2006_X_2017_07_16_pus_uvs.fits ! Writing UV FITS file: J0854+2006_X_2017_07_16_pus_uvs.fits wwins J0854+2006_X_2017_07_16_pus_map.win ! wwins: Wrote 6 windows to J0854+2006_X_2017_07_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00285026 Jy ! Component: 100 - total flux cleaned = -0.00477456 Jy ! Component: 150 - total flux cleaned = -0.00590415 Jy ! Component: 200 - total flux cleaned = -0.00644696 Jy ! Component: 250 - total flux cleaned = -0.00686636 Jy ! Component: 300 - total flux cleaned = -0.00727323 Jy ! Component: 350 - total flux cleaned = -0.0078664 Jy ! Component: 400 - total flux cleaned = -0.00825026 Jy ! Component: 450 - total flux cleaned = -0.0087155 Jy ! Component: 500 - total flux cleaned = -0.00880636 Jy ! Component: 550 - total flux cleaned = -0.00907646 Jy ! Component: 600 - total flux cleaned = -0.00942959 Jy ! Component: 650 - total flux cleaned = -0.00985975 Jy ! Component: 700 - total flux cleaned = -0.0101964 Jy ! Component: 750 - total flux cleaned = -0.0104441 Jy ! Component: 800 - total flux cleaned = -0.0109306 Jy ! Component: 850 - total flux cleaned = -0.0112487 Jy ! Component: 900 - total flux cleaned = -0.0114833 Jy ! Component: 950 - total flux cleaned = -0.0116393 Jy ! Component: 1000 - total flux cleaned = -0.0120951 Jy ! Component: 1050 - total flux cleaned = -0.0124678 Jy ! Component: 1100 - total flux cleaned = -0.01276 Jy ! Component: 1150 - total flux cleaned = -0.0129051 Jy ! Component: 1200 - total flux cleaned = -0.0133313 Jy ! Component: 1250 - total flux cleaned = -0.013542 Jy ! Component: 1300 - total flux cleaned = -0.0139544 Jy ! Component: 1350 - total flux cleaned = -0.0141576 Jy ! Component: 1400 - total flux cleaned = -0.0144926 Jy ! Component: 1450 - total flux cleaned = -0.0148236 Jy ! Component: 1500 - total flux cleaned = -0.0149542 Jy ! Component: 1550 - total flux cleaned = -0.0154683 Jy ! Component: 1600 - total flux cleaned = -0.0157221 Jy ! Component: 1650 - total flux cleaned = -0.0160335 Jy ! Component: 1700 - total flux cleaned = -0.0162174 Jy ! Component: 1750 - total flux cleaned = -0.0163998 Jy ! Component: 1800 - total flux cleaned = -0.016879 Jy ! Component: 1850 - total flux cleaned = -0.0168784 Jy ! Component: 1900 - total flux cleaned = -0.0169958 Jy ! Component: 1950 - total flux cleaned = -0.0171109 Jy ! Component: 2000 - total flux cleaned = -0.0171678 Jy ! Total flux subtracted in 2048 components = -0.0173927 Jy ! Clean residual min=-0.003033 max=0.002791 Jy/beam ! Clean residual mean=0.000002 rms=0.000986 Jy/beam ! Combined flux in latest and established models = 6.65245 Jy keep ! Adding 122 model components to the UV plane model. ! The established model now contains 263 components and 6.65245 Jy ![Exited script file: muppet] wmap "J0854+2006_X_2017_07_16_pus\_map.fits" ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8269 x 1.788 at -0.3858 degrees (North through East) ! Clean map min=-0.0064778 max=5.8762 Jy/beam ! Writing clean map to FITS file: J0854+2006_X_2017_07_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 5.8762 invert ! Inverting map ! Your choice of large map pixels excluded 0.084% of the data. ! The x-axis pixel size should ideally be below 0.1996 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000985615 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.050319 0.050319 0.100638 0.201276 0.402552 0.805104 1.61021 3.22042 6.44083 12.8817 25.7633 51.5267 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0029 print "peak=",int(1000*peak_flux)/1000 ! peak= 5.876 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8269 x 1.788 at -0.3858 degrees (North through East) ! Clean map min=-0.0064778 max=5.8762 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0854+2006_X_2017_07_16_pus_uvs.log closed on Thu May 9 14:03:20 2019