! Started logfile: J0854+2006_S_2017_06_15_pus_uvs.log on Tue May 7 15:15:09 2019 obs J0854+2006_S_2017_06_15_pus_uva.fits ! Reading UV FITS file: J0854+2006_S_2017_06_15_pus_uva.fits ! AN table 1: 17 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.207843 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0854+2006 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 603 lines of history. ! ! Reading 636 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0854+2006_S_2017_06_15_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 88 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 170 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.415719Jy sigma=0.009983 ! Fit after self-cal, rms=1.395037Jy sigma=0.009777 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.119 mas, bmaj=6.034 mas, bpa=-30.89 degrees ! Estimated noise=7193.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.66324 Jy ! Component: 100 - total flux cleaned = 2.13938 Jy ! Total flux subtracted in 100 components = 2.13938 Jy ! Clean residual min=-0.162625 max=0.196913 Jy/beam ! Clean residual mean=0.000176 rms=0.063775 Jy/beam ! Combined flux in latest and established models = 2.13938 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 2.13938 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.624501Jy sigma=0.004086 ! Fit after self-cal, rms=0.623660Jy sigma=0.004080 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.488 mas, bmaj=6.103 mas, bpa=-29.69 degrees ! Estimated noise=4518.45 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.34027 Jy ! Component: 100 - total flux cleaned = 0.544447 Jy ! Component: 150 - total flux cleaned = 0.665455 Jy ! Component: 200 - total flux cleaned = 0.732006 Jy ! Total flux subtracted in 200 components = 0.732006 Jy ! Clean residual min=-0.062987 max=0.063326 Jy/beam ! Clean residual mean=0.000156 rms=0.026875 Jy/beam ! Combined flux in latest and established models = 2.87139 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 64 components and 2.87139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.307644Jy sigma=0.002022 ! Fit after self-cal, rms=0.307153Jy sigma=0.002018 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 0.92 KP 1.00* ! LA 1.00* MK 1.08 NL 0.88 OV 1.00* ! PT 1.00* SC 0.96 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.27 FD 1.00* HN 0.98 KP 1.00* ! LA 1.00* MK 0.99 NL 1.00 OV 1.00* ! PT 1.00* SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00* HN 0.96 KP 1.00* ! LA 1.00* MK 1.03 NL 0.97 OV 1.00* ! PT 1.00* SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.307153Jy sigma=0.002018 ! Fit after self-cal, rms=0.203072Jy sigma=0.001361 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.498 mas, bmaj=6.185 mas, bpa=-29.98 degrees ! Estimated noise=4476.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0244465 Jy ! Component: 100 - total flux cleaned = 0.0348453 Jy ! Component: 150 - total flux cleaned = 0.0410788 Jy ! Component: 200 - total flux cleaned = 0.0451668 Jy ! Total flux subtracted in 200 components = 0.0451668 Jy ! Clean residual min=-0.006249 max=0.006265 Jy/beam ! Clean residual mean=-0.000001 rms=0.002548 Jy/beam ! Combined flux in latest and established models = 2.91655 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 118 components and 2.91655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196289Jy sigma=0.001317 ! Fit after self-cal, rms=0.196294Jy sigma=0.001317 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196294Jy sigma=0.001317 ! Fit after self-cal, rms=0.195972Jy sigma=0.001316 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.497 mas, bmaj=6.186 mas, bpa=-29.99 degrees ! Estimated noise=4469.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00643178 Jy ! Component: 100 - total flux cleaned = 0.00875772 Jy ! Component: 150 - total flux cleaned = 0.00875868 Jy ! Component: 200 - total flux cleaned = 0.00876506 Jy ! Total flux subtracted in 200 components = 0.00876506 Jy ! Clean residual min=-0.003479 max=0.003509 Jy/beam ! Clean residual mean=-0.000002 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 2.92532 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 154 components and 2.92532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195145Jy sigma=0.001311 ! Fit after self-cal, rms=0.195140Jy sigma=0.001311 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00291109 Jy ! Component: 100 - total flux cleaned = 0.00309699 Jy ! Component: 150 - total flux cleaned = 0.00280043 Jy ! Component: 200 - total flux cleaned = 0.00336503 Jy ! Total flux subtracted in 200 components = 0.00336503 Jy ! Clean residual min=-0.002250 max=0.002260 Jy/beam ! Clean residual mean=-0.000002 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 2.92868 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 201 components and 2.92868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194865Jy sigma=0.001309 ! Fit after self-cal, rms=0.194867Jy sigma=0.001309 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194867Jy sigma=0.001309 ! Fit after self-cal, rms=0.194985Jy sigma=0.001309 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.497 mas, bmaj=6.187 mas, bpa=-29.99 degrees ! Estimated noise=4467.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00266376 Jy ! Component: 100 - total flux cleaned = 0.00130741 Jy ! Component: 150 - total flux cleaned = -0.000607047 Jy ! Component: 200 - total flux cleaned = -0.00220018 Jy ! Total flux subtracted in 200 components = -0.00220018 Jy ! Clean residual min=-0.002023 max=0.002008 Jy/beam ! Clean residual mean=-0.000002 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 2.92648 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 234 components and 2.92648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194782Jy sigma=0.001308 ! Fit after self-cal, rms=0.194786Jy sigma=0.001308 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000208889 Jy ! Component: 100 - total flux cleaned = -0.00052631 Jy ! Component: 150 - total flux cleaned = -0.0005307 Jy ! Component: 200 - total flux cleaned = -0.000430062 Jy ! Total flux subtracted in 200 components = -0.000430062 Jy ! Clean residual min=-0.001669 max=0.001648 Jy/beam ! Clean residual mean=-0.000001 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 2.92605 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 277 components and 2.92605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194648Jy sigma=0.001308 ! Fit after self-cal, rms=0.194648Jy sigma=0.001308 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194648Jy sigma=0.001308 ! Fit after self-cal, rms=0.194816Jy sigma=0.001307 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.922 mas, bmaj=8.926 mas, bpa=9.333 degrees ! Estimated noise=6548.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000274897 Jy ! Component: 100 - total flux cleaned = -8.51184e-05 Jy ! Component: 150 - total flux cleaned = 5.41229e-06 Jy ! Component: 200 - total flux cleaned = 0.000204661 Jy ! Total flux subtracted in 200 components = 0.000204661 Jy ! Clean residual min=-0.001654 max=0.001683 Jy/beam ! Clean residual mean=-0.000005 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 2.92626 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 308 components and 2.92626 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194744Jy sigma=0.001307 ! Fit after self-cal, rms=0.194746Jy sigma=0.001307 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00160545 Jy ! Component: 100 - total flux cleaned = -0.00168273 Jy ! Component: 150 - total flux cleaned = -0.00153317 Jy ! Component: 200 - total flux cleaned = -0.00130024 Jy ! Total flux subtracted in 200 components = -0.00130024 Jy ! Clean residual min=-0.001419 max=0.001407 Jy/beam ! Clean residual mean=-0.000001 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 2.92496 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 346 components and 2.92496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194698Jy sigma=0.001307 ! Fit after self-cal, rms=0.194698Jy sigma=0.001307 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.498 mas, bmaj=6.188 mas, bpa=-29.99 degrees ! Estimated noise=4467.55 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.498 x 6.188 at -29.99 degrees (North through East) ! Clean map min=-0.025641 max=1.7821 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194698Jy sigma=0.001307 ! Fit after self-cal, rms=0.097831Jy sigma=0.000555 ! Inverting map and beam ! Estimated beam: bmin=2.498 mas, bmaj=6.189 mas, bpa=-29.99 degrees ! Estimated noise=4465.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000387898 Jy ! Component: 100 - total flux cleaned = 0.00113594 Jy ! Component: 150 - total flux cleaned = 0.00144089 Jy ! Component: 200 - total flux cleaned = 0.00153924 Jy ! Total flux subtracted in 200 components = 0.00153924 Jy ! Clean residual min=-0.001628 max=0.001627 Jy/beam ! Clean residual mean=-0.000001 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 2.9265 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 368 components and 2.9265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097551Jy sigma=0.000554 ! Fit after self-cal, rms=0.097553Jy sigma=0.000554 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111109 Jy ! Component: 100 - total flux cleaned = -0.00192042 Jy ! Component: 150 - total flux cleaned = -0.00207363 Jy ! Component: 200 - total flux cleaned = -0.00230118 Jy ! Total flux subtracted in 200 components = -0.00230118 Jy ! Clean residual min=-0.001258 max=0.001271 Jy/beam ! Clean residual mean=-0.000000 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 2.9242 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 401 components and 2.9242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097390Jy sigma=0.000553 ! Fit after self-cal, rms=0.097393Jy sigma=0.000553 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097393Jy sigma=0.000553 ! Fit after self-cal, rms=0.097529Jy sigma=0.000553 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.106 mas, bmaj=6.392 mas, bpa=-31.82 degrees ! Estimated noise=5863.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.64758 Jy ! Component: 100 - total flux cleaned = 2.11609 Jy ! Component: 150 - total flux cleaned = 2.32717 Jy ! Component: 200 - total flux cleaned = 2.46684 Jy ! Total flux subtracted in 200 components = 2.46684 Jy ! Clean residual min=-0.076702 max=0.079634 Jy/beam ! Clean residual mean=0.000078 rms=0.031106 Jy/beam ! Combined flux in latest and established models = 2.46685 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 2.46685 Jy ! Inverting map and beam ! Estimated beam: bmin=2.498 mas, bmaj=6.19 mas, bpa=-29.99 degrees ! Estimated noise=4465.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.158343 Jy ! Component: 100 - total flux cleaned = 0.248211 Jy ! Component: 150 - total flux cleaned = 0.308779 Jy ! Component: 200 - total flux cleaned = 0.348474 Jy ! Total flux subtracted in 200 components = 0.348474 Jy ! Clean residual min=-0.027195 max=0.027515 Jy/beam ! Clean residual mean=0.000068 rms=0.011694 Jy/beam ! Combined flux in latest and established models = 2.81532 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 88 components and 2.81532 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.922 mas, bmaj=8.929 mas, bpa=9.316 degrees ! Estimated noise=6543.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0617341 Jy ! Component: 100 - total flux cleaned = 0.0731679 Jy ! Component: 150 - total flux cleaned = 0.0815689 Jy ! Component: 200 - total flux cleaned = 0.0895915 Jy ! Total flux subtracted in 200 components = 0.0895915 Jy ! Clean residual min=-0.013554 max=0.013698 Jy/beam ! Clean residual mean=0.000045 rms=0.003963 Jy/beam ! Combined flux in latest and established models = 2.90491 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00263396 Jy ! Component: 100 - total flux cleaned = -0.0027472 Jy ! Component: 150 - total flux cleaned = -0.00592924 Jy ! Component: 200 - total flux cleaned = -0.0123122 Jy ! Total flux subtracted in 200 components = -0.0123122 Jy ! Clean residual min=-0.022930 max=0.023023 Jy/beam ! Clean residual mean=0.000046 rms=0.008393 Jy/beam ! Combined flux in latest and established models = 2.8926 Jy ! Adding 88 model components to the UV plane model. ! The established model now contains 173 components and 2.8926 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.498 mas, bmaj=6.19 mas, bpa=-29.99 degrees ! Estimated noise=4465.53 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00225736 Jy ! Component: 100 - total flux cleaned = -0.00678544 Jy ! Component: 150 - total flux cleaned = -0.00685661 Jy ! Component: 200 - total flux cleaned = -0.00740328 Jy ! Total flux subtracted in 200 components = -0.00740328 Jy ! Clean residual min=-0.008837 max=0.008922 Jy/beam ! Clean residual mean=0.000002 rms=0.002890 Jy/beam ! Combined flux in latest and established models = 2.8852 Jy selfcal ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 215 components and 2.8852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101193Jy sigma=0.000581 ! Fit after self-cal, rms=0.100614Jy sigma=0.000577 wmodel J0854+2006_S_2017_06_15_pus_map.mod ! Writing 215 model components to file: J0854+2006_S_2017_06_15_pus_map.mod wobs J0854+2006_S_2017_06_15_pus_uvs.fits ! Writing UV FITS file: J0854+2006_S_2017_06_15_pus_uvs.fits wwins J0854+2006_S_2017_06_15_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0854+2006_S_2017_06_15_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.498 x 6.19 at -29.99 degrees (North through East) ! Clean map min=-0.021219 max=1.8583 Jy/beam ! Writing clean map to FITS file: J0854+2006_S_2017_06_15_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.85828 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00264434 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.426901 0.426901 0.853802 1.7076 3.41521 6.83042 13.6608 27.3217 54.6434 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0079 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.858 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.498 x 6.19 at -29.99 degrees (North through East) ! Clean map min=-0.021219 max=1.8583 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0854+2006_S_2017_06_15_pus_uvs.log closed on Tue May 7 15:15:13 2019