! Started logfile: J0854+2006_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:09:24 2019 obs J0854+2006_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0854+2006_S_2017_01_16_pus_uva.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.608333 visibilities/baseline/integration-bin. ! Found source: J0854+2006 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 1752 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0854+2006_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 35 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=5.298853Jy sigma=0.011607 ! Fit after self-cal, rms=5.296910Jy sigma=0.011566 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.898 mas, bmaj=7.894 mas, bpa=18.59 degrees ! Estimated noise=3023.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.87081 Jy ! Component: 100 - total flux cleaned = 2.36041 Jy ! Total flux subtracted in 100 components = 2.36041 Jy ! Clean residual min=-0.160995 max=0.208650 Jy/beam ! Clean residual mean=-0.000890 rms=0.053011 Jy/beam ! Combined flux in latest and established models = 2.36041 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 2.36041 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.887504Jy sigma=0.004969 ! Fit after self-cal, rms=4.887492Jy sigma=0.004967 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.457 mas, bmaj=8.781 mas, bpa=21.44 degrees ! Estimated noise=2449.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.236123 Jy ! Component: 100 - total flux cleaned = 0.366453 Jy ! Component: 150 - total flux cleaned = 0.455233 Jy ! Component: 200 - total flux cleaned = 0.517618 Jy ! Total flux subtracted in 200 components = 0.517618 Jy ! Clean residual min=-0.197932 max=0.140753 Jy/beam ! Clean residual mean=0.000160 rms=0.049192 Jy/beam ! Combined flux in latest and established models = 2.87803 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 36 components and 2.87803 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.816226Jy sigma=0.004896 ! Fit after self-cal, rms=4.816204Jy sigma=0.004894 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 0.85 HN 0.95 KP 1.07 ! LA 1.10 MK 1.00* NL 0.92 OV 1.04 ! PT 1.00 SC 0.94 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 0.90 HN 1.00 KP 1.04 ! LA 1.06 MK 1.00* NL 1.05 OV 1.11 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 0.91 HN 0.97 KP 1.08 ! LA 1.09 MK 1.00* NL 1.02 OV 1.01 ! PT 1.00 SC 0.98 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 0.99 HN 0.93 KP 1.00* ! LA 0.88 MK 1.00* NL 1.00* OV 1.06 ! PT 0.93 SC 1.46 ! ! ! Fit before self-cal, rms=4.816204Jy sigma=0.004894 ! Fit after self-cal, rms=4.259729Jy sigma=0.004401 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.45 mas, bmaj=8.693 mas, bpa=20.72 degrees ! Estimated noise=2561.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.132231 Jy ! Component: 100 - total flux cleaned = 0.195265 Jy ! Component: 150 - total flux cleaned = 0.235936 Jy ! Component: 200 - total flux cleaned = 0.251508 Jy ! Total flux subtracted in 200 components = 0.251508 Jy ! Clean residual min=-0.171614 max=0.152597 Jy/beam ! Clean residual mean=0.000692 rms=0.048451 Jy/beam ! Combined flux in latest and established models = 3.12953 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 58 components and 3.12953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.223338Jy sigma=0.004545 ! Fit after self-cal, rms=4.223340Jy sigma=0.004544 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=4.223340Jy sigma=0.004544 ! Fit after self-cal, rms=0.189900Jy sigma=0.000989 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.488 mas, bmaj=8.74 mas, bpa=21.4 degrees ! Estimated noise=2565.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0407119 Jy ! Component: 100 - total flux cleaned = -0.0497935 Jy ! Component: 150 - total flux cleaned = -0.0555422 Jy ! Component: 200 - total flux cleaned = -0.0605752 Jy ! Total flux subtracted in 200 components = -0.0605752 Jy ! Clean residual min=-0.027209 max=0.022589 Jy/beam ! Clean residual mean=-0.000116 rms=0.006154 Jy/beam ! Combined flux in latest and established models = 3.06896 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 72 components and 3.06896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180643Jy sigma=0.000884 ! Fit after self-cal, rms=0.179143Jy sigma=0.000882 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00559248 Jy ! Component: 100 - total flux cleaned = -0.00866731 Jy ! Component: 150 - total flux cleaned = -0.0109583 Jy ! Component: 200 - total flux cleaned = -0.0127347 Jy ! Total flux subtracted in 200 components = -0.0127347 Jy ! Clean residual min=-0.025683 max=0.022858 Jy/beam ! Clean residual mean=-0.000147 rms=0.006013 Jy/beam ! Combined flux in latest and established models = 3.05622 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 82 components and 3.05622 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178006Jy sigma=0.000869 ! Fit after self-cal, rms=0.178027Jy sigma=0.000869 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.178027Jy sigma=0.000869 ! Fit after self-cal, rms=0.174416Jy sigma=0.000821 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.502 mas, bmaj=8.79 mas, bpa=21.53 degrees ! Estimated noise=2569.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0233878 Jy ! Component: 100 - total flux cleaned = -0.0312778 Jy ! Component: 150 - total flux cleaned = -0.0360483 Jy ! Component: 200 - total flux cleaned = -0.040046 Jy ! Total flux subtracted in 200 components = -0.040046 Jy ! Clean residual min=-0.020864 max=0.019595 Jy/beam ! Clean residual mean=-0.000099 rms=0.004749 Jy/beam ! Combined flux in latest and established models = 3.01618 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 85 components and 3.01618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170850Jy sigma=0.000778 ! Fit after self-cal, rms=0.170850Jy sigma=0.000778 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00379371 Jy ! Component: 100 - total flux cleaned = -0.006339 Jy ! Component: 150 - total flux cleaned = -0.00811738 Jy ! Component: 200 - total flux cleaned = -0.00951023 Jy ! Total flux subtracted in 200 components = -0.00951023 Jy ! Clean residual min=-0.020040 max=0.019151 Jy/beam ! Clean residual mean=-0.000122 rms=0.004663 Jy/beam ! Combined flux in latest and established models = 3.00667 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 90 components and 3.00667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170210Jy sigma=0.000770 ! Fit after self-cal, rms=0.170222Jy sigma=0.000770 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170222Jy sigma=0.000770 ! Fit after self-cal, rms=0.168880Jy sigma=0.000749 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.214 mas, bmaj=10.31 mas, bpa=13.33 degrees ! Estimated noise=2893.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0172801 Jy ! Component: 100 - total flux cleaned = -0.0248326 Jy ! Component: 150 - total flux cleaned = -0.0284846 Jy ! Component: 200 - total flux cleaned = -0.0290114 Jy ! Total flux subtracted in 200 components = -0.0290114 Jy ! Clean residual min=-0.014670 max=0.016885 Jy/beam ! Clean residual mean=-0.000140 rms=0.003830 Jy/beam ! Combined flux in latest and established models = 2.97766 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 96 components and 2.97766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167991Jy sigma=0.000738 ! Fit after self-cal, rms=0.167987Jy sigma=0.000738 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-98.5, 32). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131584 Jy ! Component: 100 - total flux cleaned = 0.0128495 Jy ! Component: 150 - total flux cleaned = 0.0126125 Jy ! Component: 200 - total flux cleaned = 0.0119822 Jy ! Total flux subtracted in 200 components = 0.0119822 Jy ! Clean residual min=-0.013265 max=0.013482 Jy/beam ! Clean residual mean=-0.000074 rms=0.003326 Jy/beam ! Combined flux in latest and established models = 2.98964 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 118 components and 2.98964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166890Jy sigma=0.000723 ! Fit after self-cal, rms=0.166655Jy sigma=0.000722 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.512 mas, bmaj=8.821 mas, bpa=21.56 degrees ! Estimated noise=2571.98 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.512 x 8.821 at 21.56 degrees (North through East) ! Clean map min=-0.014309 max=2.549 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166655Jy sigma=0.000722 ! Fit after self-cal, rms=0.151795Jy sigma=0.000657 ! Inverting map and beam ! Estimated beam: bmin=4.508 mas, bmaj=8.839 mas, bpa=21.53 degrees ! Estimated noise=2567.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0089212 Jy ! Component: 100 - total flux cleaned = -0.0124438 Jy ! Component: 150 - total flux cleaned = -0.0127512 Jy ! Component: 200 - total flux cleaned = -0.0135723 Jy ! Total flux subtracted in 200 components = -0.0135723 Jy ! Clean residual min=-0.012569 max=0.012479 Jy/beam ! Clean residual mean=-0.000054 rms=0.003071 Jy/beam ! Combined flux in latest and established models = 2.97606 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 132 components and 2.97606 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150220Jy sigma=0.000639 ! Fit after self-cal, rms=0.150223Jy sigma=0.000639 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000622645 Jy ! Component: 100 - total flux cleaned = 0.000392462 Jy ! Component: 150 - total flux cleaned = 0.000388656 Jy ! Component: 200 - total flux cleaned = 0.000393536 Jy ! Total flux subtracted in 200 components = 0.000393536 Jy ! Clean residual min=-0.011642 max=0.011737 Jy/beam ! Clean residual mean=-0.000055 rms=0.002929 Jy/beam ! Combined flux in latest and established models = 2.97646 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 146 components and 2.97646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149473Jy sigma=0.000631 ! Fit after self-cal, rms=0.149476Jy sigma=0.000631 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.149476Jy sigma=0.000631 ! Fit after self-cal, rms=0.149581Jy sigma=0.000628 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.952 mas, bmaj=7.94 mas, bpa=18.57 degrees ! Estimated noise=3166.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.95546 Jy ! Component: 100 - total flux cleaned = 2.44385 Jy ! Component: 150 - total flux cleaned = 2.655 Jy ! Component: 200 - total flux cleaned = 2.75806 Jy ! Total flux subtracted in 200 components = 2.75806 Jy ! Clean residual min=-0.024739 max=0.048942 Jy/beam ! Clean residual mean=-0.000373 rms=0.008163 Jy/beam ! Combined flux in latest and established models = 2.75806 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and 2.75806 Jy ! Inverting map and beam ! Estimated beam: bmin=4.514 mas, bmaj=8.848 mas, bpa=21.52 degrees ! Estimated noise=2566.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0683556 Jy ! Component: 100 - total flux cleaned = 0.108674 Jy ! Component: 150 - total flux cleaned = 0.135883 Jy ! Component: 200 - total flux cleaned = 0.155209 Jy ! Total flux subtracted in 200 components = 0.155209 Jy ! Clean residual min=-0.013855 max=0.016223 Jy/beam ! Clean residual mean=-0.000180 rms=0.003354 Jy/beam ! Combined flux in latest and established models = 2.91327 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 89 components and 2.91327 Jy ! Inverting map ! Added new window around map position (-7.5, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0159476 Jy ! Component: 100 - total flux cleaned = 0.0269298 Jy ! Component: 150 - total flux cleaned = 0.033181 Jy ! Component: 200 - total flux cleaned = 0.0358374 Jy ! Total flux subtracted in 200 components = 0.0358374 Jy ! Clean residual min=-0.011139 max=0.008902 Jy/beam ! Clean residual mean=-0.000087 rms=0.002540 Jy/beam ! Combined flux in latest and established models = 2.9491 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 120 components and 2.9491 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.219 mas, bmaj=10.34 mas, bpa=13.34 degrees ! Estimated noise=2883.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00710036 Jy ! Component: 100 - total flux cleaned = 0.00945034 Jy ! Component: 150 - total flux cleaned = 0.0112932 Jy ! Component: 200 - total flux cleaned = 0.0129031 Jy ! Total flux subtracted in 200 components = 0.0129031 Jy ! Clean residual min=-0.010930 max=0.009148 Jy/beam ! Clean residual mean=-0.000093 rms=0.002596 Jy/beam ! Combined flux in latest and established models = 2.96201 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00146522 Jy ! Component: 100 - total flux cleaned = 0.00251614 Jy ! Component: 150 - total flux cleaned = 0.0032129 Jy ! Component: 200 - total flux cleaned = 0.00374355 Jy ! Total flux subtracted in 200 components = 0.00374355 Jy ! Clean residual min=-0.010694 max=0.008296 Jy/beam ! Clean residual mean=-0.000078 rms=0.002466 Jy/beam ! Combined flux in latest and established models = 2.96575 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 180 components and 2.96575 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.514 mas, bmaj=8.848 mas, bpa=21.52 degrees ! Estimated noise=2566.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00048679 Jy ! Component: 100 - total flux cleaned = 0.000311865 Jy ! Component: 150 - total flux cleaned = 0.000310491 Jy ! Component: 200 - total flux cleaned = 0.000455271 Jy ! Total flux subtracted in 200 components = 0.000455271 Jy ! Clean residual min=-0.009325 max=0.007343 Jy/beam ! Clean residual mean=-0.000044 rms=0.002149 Jy/beam ! Combined flux in latest and established models = 2.96621 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 205 components and 2.96621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146962Jy sigma=0.000594 ! Fit after self-cal, rms=0.146861Jy sigma=0.000593 wmodel J0854+2006_S_2017_01_16_pus_map.mod ! Writing 205 model components to file: J0854+2006_S_2017_01_16_pus_map.mod wobs J0854+2006_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0854+2006_S_2017_01_16_pus_uvs.fits wwins J0854+2006_S_2017_01_16_pus_map.win ! wwins: Wrote 3 windows to J0854+2006_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00307685 Jy ! Component: 100 - total flux cleaned = -0.00459916 Jy ! Component: 150 - total flux cleaned = -0.00587983 Jy ! Component: 200 - total flux cleaned = -0.00685847 Jy ! Component: 250 - total flux cleaned = -0.00791032 Jy ! Component: 300 - total flux cleaned = -0.00902527 Jy ! Component: 350 - total flux cleaned = -0.00966981 Jy ! Component: 400 - total flux cleaned = -0.010186 Jy ! Component: 450 - total flux cleaned = -0.0104851 Jy ! Component: 500 - total flux cleaned = -0.0105846 Jy ! Component: 550 - total flux cleaned = -0.0105841 Jy ! Component: 600 - total flux cleaned = -0.0105817 Jy ! Component: 650 - total flux cleaned = -0.0104001 Jy ! Component: 700 - total flux cleaned = -0.0103998 Jy ! Component: 750 - total flux cleaned = -0.0106535 Jy ! Component: 800 - total flux cleaned = -0.0108184 Jy ! Component: 850 - total flux cleaned = -0.0109001 Jy ! Component: 900 - total flux cleaned = -0.0111398 Jy ! Component: 950 - total flux cleaned = -0.0112175 Jy ! Component: 1000 - total flux cleaned = -0.0112177 Jy ! Component: 1050 - total flux cleaned = -0.0109958 Jy ! Component: 1100 - total flux cleaned = -0.010924 Jy ! Component: 1150 - total flux cleaned = -0.0109957 Jy ! Component: 1200 - total flux cleaned = -0.0107849 Jy ! Component: 1250 - total flux cleaned = -0.0107152 Jy ! Component: 1300 - total flux cleaned = -0.0105804 Jy ! Component: 1350 - total flux cleaned = -0.0103166 Jy ! Component: 1400 - total flux cleaned = -0.0106418 Jy ! Component: 1450 - total flux cleaned = -0.0105139 Jy ! Component: 1500 - total flux cleaned = -0.0106382 Jy ! Component: 1550 - total flux cleaned = -0.0105764 Jy ! Component: 1600 - total flux cleaned = -0.0106378 Jy ! Component: 1650 - total flux cleaned = -0.0108172 Jy ! Component: 1700 - total flux cleaned = -0.0108751 Jy ! Component: 1750 - total flux cleaned = -0.0108746 Jy ! Component: 1800 - total flux cleaned = -0.0109882 Jy ! Component: 1850 - total flux cleaned = -0.0110441 Jy ! Component: 1900 - total flux cleaned = -0.0112105 Jy ! Component: 1950 - total flux cleaned = -0.0112099 Jy ! Component: 2000 - total flux cleaned = -0.0112627 Jy ! Component: 2050 - total flux cleaned = -0.0113679 Jy ! Component: 2100 - total flux cleaned = -0.01142 Jy ! Component: 2150 - total flux cleaned = -0.0114208 Jy ! Component: 2200 - total flux cleaned = -0.0114718 Jy ! Component: 2250 - total flux cleaned = -0.0114729 Jy ! Component: 2300 - total flux cleaned = -0.011523 Jy ! Component: 2350 - total flux cleaned = -0.0114733 Jy ! Component: 2400 - total flux cleaned = -0.011571 Jy ! Component: 2450 - total flux cleaned = -0.0114743 Jy ! Component: 2500 - total flux cleaned = -0.0113788 Jy ! Component: 2550 - total flux cleaned = -0.011332 Jy ! Component: 2600 - total flux cleaned = -0.0114257 Jy ! Component: 2650 - total flux cleaned = -0.0111945 Jy ! Component: 2700 - total flux cleaned = -0.0113776 Jy ! Component: 2750 - total flux cleaned = -0.011287 Jy ! Component: 2800 - total flux cleaned = -0.0112873 Jy ! Component: 2850 - total flux cleaned = -0.0111528 Jy ! Component: 2900 - total flux cleaned = -0.0112856 Jy ! Component: 2950 - total flux cleaned = -0.0113291 Jy ! Component: 3000 - total flux cleaned = -0.0111555 Jy ! Component: 3050 - total flux cleaned = -0.0112417 Jy ! Component: 3100 - total flux cleaned = -0.0112848 Jy ! Component: 3150 - total flux cleaned = -0.0112848 Jy ! Component: 3200 - total flux cleaned = -0.0112431 Jy ! Component: 3250 - total flux cleaned = -0.0112024 Jy ! Component: 3300 - total flux cleaned = -0.011203 Jy ! Component: 3350 - total flux cleaned = -0.0112036 Jy ! Component: 3400 - total flux cleaned = -0.0112442 Jy ! Component: 3450 - total flux cleaned = -0.0110428 Jy ! Component: 3500 - total flux cleaned = -0.0110029 Jy ! Component: 3550 - total flux cleaned = -0.0109238 Jy ! Component: 3600 - total flux cleaned = -0.0107666 Jy ! Component: 3650 - total flux cleaned = -0.0107667 Jy ! Component: 3700 - total flux cleaned = -0.0107277 Jy ! Component: 3750 - total flux cleaned = -0.0105739 Jy ! Component: 3800 - total flux cleaned = -0.010459 Jy ! Component: 3850 - total flux cleaned = -0.0104212 Jy ! Component: 3900 - total flux cleaned = -0.0102705 Jy ! Component: 3950 - total flux cleaned = -0.0102328 Jy ! Component: 4000 - total flux cleaned = -0.00997241 Jy ! Component: 4050 - total flux cleaned = -0.00997232 Jy ! Total flux subtracted in 4096 components = -0.00978877 Jy ! Clean residual min=-0.002071 max=0.002477 Jy/beam ! Clean residual mean=-0.000004 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 2.95642 Jy keep ! Adding 290 model components to the UV plane model. ! The established model now contains 495 components and 2.95642 Jy ![Exited script file: muppet] wmap "J0854+2006_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.514 x 8.848 at 21.52 degrees (North through East) ! Clean map min=-0.0076766 max=2.5523 Jy/beam ! Writing clean map to FITS file: J0854+2006_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.55233 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000662531 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0778736 0.0778736 0.155747 0.311494 0.622989 1.24598 2.49196 4.98391 9.96782 19.9356 39.8713 79.7426 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.552 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.514 x 8.848 at 21.52 degrees (North through East) ! Clean map min=-0.0076766 max=2.5523 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0854+2006_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:09:29 2019