! Started logfile: J0854+0720_S_2017_05_27_pus_uvs.log on Fri May 3 11:02:46 2019 obs J0854+0720_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0854+0720_S_2017_05_27_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.970565 visibilities/baseline/integration-bin. ! Found source: J0854+0720 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 19916 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0854+0720_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 19 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 602 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.897709Jy sigma=0.055813 ! Fit after self-cal, rms=0.890431Jy sigma=0.055628 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.86 mas, bmaj=6.284 mas, bpa=-0.981 degrees ! Estimated noise=491.542 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0469691 Jy ! Component: 100 - total flux cleaned = 0.0591904 Jy ! Total flux subtracted in 100 components = 0.0591904 Jy ! Clean residual min=-0.017896 max=0.023022 Jy/beam ! Clean residual mean=-0.000015 rms=0.005171 Jy/beam ! Combined flux in latest and established models = 0.0591904 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.0591904 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145569Jy sigma=0.003089 ! Fit after self-cal, rms=0.145554Jy sigma=0.003086 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.611 mas, bmaj=7.406 mas, bpa=-0.4675 degrees ! Estimated noise=345.599 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00663365 Jy ! Component: 100 - total flux cleaned = 0.00860543 Jy ! Component: 150 - total flux cleaned = 0.00899266 Jy ! Component: 200 - total flux cleaned = 0.00935611 Jy ! Total flux subtracted in 200 components = 0.00935611 Jy ! Clean residual min=-0.019173 max=0.020148 Jy/beam ! Clean residual mean=-0.000105 rms=0.005577 Jy/beam ! Combined flux in latest and established models = 0.0685465 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 20 components and 0.0685465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144147Jy sigma=0.003181 ! Fit after self-cal, rms=0.144109Jy sigma=0.003181 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.58 FD 0.64 HN 0.76 KP 0.71 ! LA 0.72 MK 0.78 NL 0.64 OV 0.72 ! PT 0.75 SC 0.64 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 14.04 FD 0.66 HN 0.80 KP 0.71 ! LA 0.71 MK 0.83 NL 0.76 OV 0.77 ! PT 0.73 SC 0.67 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 27.53 FD 0.68 HN 0.82 KP 0.74 ! LA 0.76 MK 0.92 NL 0.73 OV 0.69 ! PT 0.76 SC 0.70 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.81 HN 0.92 KP 1.00* ! LA 28.87 MK 0.94 NL 1.00* OV 1.00* ! PT 0.85 SC 1.00* ! ! ! Fit before self-cal, rms=0.144109Jy sigma=0.003181 ! Fit after self-cal, rms=1.267262Jy sigma=0.000769 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.429 mas, bmaj=7.967 mas, bpa=-0.9887 degrees ! Estimated noise=402.822 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00574168 Jy ! Component: 100 - total flux cleaned = 0.00536738 Jy ! Component: 150 - total flux cleaned = 0.00521423 Jy ! Component: 200 - total flux cleaned = 0.00507913 Jy ! Total flux subtracted in 200 components = 0.00507913 Jy ! Clean residual min=-0.006298 max=0.003797 Jy/beam ! Clean residual mean=-0.000001 rms=0.000980 Jy/beam ! Combined flux in latest and established models = 0.0736256 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 32 components and 0.0736256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.265200Jy sigma=0.000775 ! Fit after self-cal, rms=1.266014Jy sigma=0.000747 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.266014Jy sigma=0.000747 ! Fit after self-cal, rms=1.171743Jy sigma=0.000714 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.416 mas, bmaj=7.896 mas, bpa=-2.128 degrees ! Estimated noise=413.134 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00329549 Jy ! Component: 100 - total flux cleaned = 0.00292695 Jy ! Component: 150 - total flux cleaned = 0.00272873 Jy ! Component: 200 - total flux cleaned = 0.00272617 Jy ! Total flux subtracted in 200 components = 0.00272617 Jy ! Clean residual min=-0.003888 max=0.003033 Jy/beam ! Clean residual mean=-0.000007 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 0.0763518 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.0763518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.170611Jy sigma=0.000716 ! Fit after self-cal, rms=1.170601Jy sigma=0.000715 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000338004 Jy ! Component: 100 - total flux cleaned = 0.000271585 Jy ! Component: 150 - total flux cleaned = 0.000215418 Jy ! Component: 200 - total flux cleaned = 0.000164231 Jy ! Total flux subtracted in 200 components = 0.000164231 Jy ! Clean residual min=-0.003557 max=0.002791 Jy/beam ! Clean residual mean=-0.000007 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.076516 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.076516 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.170262Jy sigma=0.000716 ! Fit after self-cal, rms=1.170265Jy sigma=0.000716 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.170265Jy sigma=0.000716 ! Fit after self-cal, rms=0.534259Jy sigma=0.000685 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.417 mas, bmaj=7.877 mas, bpa=-3.057 degrees ! Estimated noise=418.847 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138953 Jy ! Component: 100 - total flux cleaned = 0.00140134 Jy ! Component: 150 - total flux cleaned = 0.00137287 Jy ! Component: 200 - total flux cleaned = 0.00137361 Jy ! Total flux subtracted in 200 components = 0.00137361 Jy ! Clean residual min=-0.001990 max=0.001641 Jy/beam ! Clean residual mean=-0.000001 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0778896 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 51 components and 0.0778896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.534027Jy sigma=0.000685 ! Fit after self-cal, rms=0.534005Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000118534 Jy ! Component: 100 - total flux cleaned = 0.000118062 Jy ! Component: 150 - total flux cleaned = 0.000118546 Jy ! Component: 200 - total flux cleaned = 0.000118248 Jy ! Total flux subtracted in 200 components = 0.000118248 Jy ! Clean residual min=-0.001895 max=0.001592 Jy/beam ! Clean residual mean=-0.000001 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.0780079 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 51 components and 0.0780079 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.533941Jy sigma=0.000684 ! Fit after self-cal, rms=0.533941Jy sigma=0.000684 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.533941Jy sigma=0.000684 ! Fit after self-cal, rms=0.553992Jy sigma=0.000683 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.538 mas, bmaj=12.01 mas, bpa=-5.57 degrees ! Estimated noise=513.194 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115274 Jy ! Component: 100 - total flux cleaned = 0.0010754 Jy ! Component: 150 - total flux cleaned = 0.000971996 Jy ! Component: 200 - total flux cleaned = 0.000882771 Jy ! Total flux subtracted in 200 components = 0.000882771 Jy ! Clean residual min=-0.002038 max=0.001875 Jy/beam ! Clean residual mean=-0.000001 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.0788907 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 55 components and 0.0788907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.553727Jy sigma=0.000684 ! Fit after self-cal, rms=0.553727Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.3052e-05 Jy ! Component: 100 - total flux cleaned = -0.000119573 Jy ! Component: 150 - total flux cleaned = -0.000158597 Jy ! Component: 200 - total flux cleaned = -0.000209989 Jy ! Total flux subtracted in 200 components = -0.000209989 Jy ! Clean residual min=-0.002028 max=0.001854 Jy/beam ! Clean residual mean=-0.000001 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.0786807 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 56 components and 0.0786807 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.553626Jy sigma=0.000684 ! Fit after self-cal, rms=0.553626Jy sigma=0.000684 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=7.908 mas, bpa=-3.257 degrees ! Estimated noise=427.881 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.419 x 7.908 at -3.257 degrees (North through East) ! Clean map min=-0.0027374 max=0.075207 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.817 mas, bmaj=6.826 mas, bpa=-2.724 degrees ! Estimated noise=573.713 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0560841 Jy ! Component: 100 - total flux cleaned = 0.0702696 Jy ! Component: 150 - total flux cleaned = 0.0761154 Jy ! Component: 200 - total flux cleaned = 0.0786762 Jy ! Total flux subtracted in 200 components = 0.0786762 Jy ! Clean residual min=-0.002787 max=0.002266 Jy/beam ! Clean residual mean=-0.000001 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.0786762 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0786762 Jy ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=7.908 mas, bpa=-3.257 degrees ! Estimated noise=427.881 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000821096 Jy ! Component: 100 - total flux cleaned = 0.000754319 Jy ! Component: 150 - total flux cleaned = 0.000644185 Jy ! Component: 200 - total flux cleaned = 0.000601728 Jy ! Total flux subtracted in 200 components = 0.000601728 Jy ! Clean residual min=-0.002001 max=0.001695 Jy/beam ! Clean residual mean=-0.000001 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.0792779 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 35 components and 0.0792779 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.538 mas, bmaj=12.01 mas, bpa=-5.57 degrees ! Estimated noise=513.194 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.14005e-05 Jy ! Component: 100 - total flux cleaned = -0.000147582 Jy ! Component: 150 - total flux cleaned = -0.000262231 Jy ! Component: 200 - total flux cleaned = -0.000361552 Jy ! Total flux subtracted in 200 components = -0.000361552 Jy ! Clean residual min=-0.002059 max=0.001886 Jy/beam ! Clean residual mean=-0.000001 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.0789164 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.63473e-05 Jy ! Component: 100 - total flux cleaned = -0.000160694 Jy ! Component: 150 - total flux cleaned = -0.000203275 Jy ! Component: 200 - total flux cleaned = -0.000260137 Jy ! Total flux subtracted in 200 components = -0.000260137 Jy ! Clean residual min=-0.002042 max=0.001865 Jy/beam ! Clean residual mean=-0.000001 rms=0.000504 Jy/beam ! Combined flux in latest and established models = 0.0786562 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 44 components and 0.0786562 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.419 mas, bmaj=7.908 mas, bpa=-3.257 degrees ! Estimated noise=427.881 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00048053 Jy ! Component: 100 - total flux cleaned = 0.0004449 Jy ! Component: 150 - total flux cleaned = 0.000444159 Jy ! Component: 200 - total flux cleaned = 0.000419985 Jy ! Total flux subtracted in 200 components = 0.000419985 Jy ! Clean residual min=-0.001967 max=0.001621 Jy/beam ! Clean residual mean=-0.000001 rms=0.000450 Jy/beam ! Combined flux in latest and established models = 0.0790762 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 54 components and 0.0790762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.553526Jy sigma=0.000684 ! Fit after self-cal, rms=0.553522Jy sigma=0.000684 wmodel J0854+0720_S_2017_05_27_pus_map.mod ! Writing 54 model components to file: J0854+0720_S_2017_05_27_pus_map.mod wobs J0854+0720_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0854+0720_S_2017_05_27_pus_uvs.fits wwins J0854+0720_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J0854+0720_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0008412 Jy ! Component: 100 - total flux cleaned = -0.00119136 Jy ! Component: 150 - total flux cleaned = -0.00119278 Jy ! Component: 200 - total flux cleaned = -0.00113539 Jy ! Component: 250 - total flux cleaned = -0.00105109 Jy ! Component: 300 - total flux cleaned = -0.0010235 Jy ! Component: 350 - total flux cleaned = -0.00096996 Jy ! Component: 400 - total flux cleaned = -0.000865166 Jy ! Component: 450 - total flux cleaned = -0.000891135 Jy ! Component: 500 - total flux cleaned = -0.000916752 Jy ! Component: 550 - total flux cleaned = -0.000941936 Jy ! Component: 600 - total flux cleaned = -0.00101552 Jy ! Component: 650 - total flux cleaned = -0.00103958 Jy ! Component: 700 - total flux cleaned = -0.00108699 Jy ! Component: 750 - total flux cleaned = -0.00111038 Jy ! Component: 800 - total flux cleaned = -0.00113365 Jy ! Component: 850 - total flux cleaned = -0.00115666 Jy ! Component: 900 - total flux cleaned = -0.00113417 Jy ! Component: 950 - total flux cleaned = -0.00115694 Jy ! Component: 1000 - total flux cleaned = -0.00120112 Jy ! Component: 1050 - total flux cleaned = -0.00122306 Jy ! Component: 1100 - total flux cleaned = -0.00124491 Jy ! Component: 1150 - total flux cleaned = -0.00130916 Jy ! Component: 1200 - total flux cleaned = -0.00130945 Jy ! Component: 1250 - total flux cleaned = -0.00137265 Jy ! Component: 1300 - total flux cleaned = -0.00143521 Jy ! Component: 1350 - total flux cleaned = -0.00145577 Jy ! Component: 1400 - total flux cleaned = -0.00145603 Jy ! Component: 1450 - total flux cleaned = -0.00151725 Jy ! Component: 1500 - total flux cleaned = -0.00153757 Jy ! Component: 1550 - total flux cleaned = -0.00159782 Jy ! Component: 1600 - total flux cleaned = -0.00161774 Jy ! Component: 1650 - total flux cleaned = -0.00163736 Jy ! Component: 1700 - total flux cleaned = -0.00169626 Jy ! Component: 1750 - total flux cleaned = -0.00171561 Jy ! Component: 1800 - total flux cleaned = -0.00169629 Jy ! Component: 1850 - total flux cleaned = -0.00175414 Jy ! Component: 1900 - total flux cleaned = -0.001735 Jy ! Component: 1950 - total flux cleaned = -0.00177296 Jy ! Component: 2000 - total flux cleaned = -0.00173511 Jy ! Component: 2050 - total flux cleaned = -0.00179146 Jy ! Component: 2100 - total flux cleaned = -0.00175417 Jy ! Component: 2150 - total flux cleaned = -0.00177266 Jy ! Component: 2200 - total flux cleaned = -0.00177292 Jy ! Component: 2250 - total flux cleaned = -0.0018096 Jy ! Component: 2300 - total flux cleaned = -0.00180968 Jy ! Component: 2350 - total flux cleaned = -0.00179163 Jy ! Component: 2400 - total flux cleaned = -0.00184559 Jy ! Component: 2450 - total flux cleaned = -0.00184561 Jy ! Component: 2500 - total flux cleaned = -0.00186336 Jy ! Component: 2550 - total flux cleaned = -0.00188102 Jy ! Component: 2600 - total flux cleaned = -0.00191609 Jy ! Component: 2650 - total flux cleaned = -0.00193362 Jy ! Component: 2700 - total flux cleaned = -0.00189881 Jy ! Component: 2750 - total flux cleaned = -0.00193341 Jy ! Component: 2800 - total flux cleaned = -0.00189917 Jy ! Component: 2850 - total flux cleaned = -0.00195027 Jy ! Component: 2900 - total flux cleaned = -0.00193331 Jy ! Component: 2950 - total flux cleaned = -0.00195013 Jy ! Component: 3000 - total flux cleaned = -0.00198378 Jy ! Component: 3050 - total flux cleaned = -0.00201718 Jy ! Component: 3100 - total flux cleaned = -0.00195071 Jy ! Component: 3150 - total flux cleaned = -0.00201699 Jy ! Component: 3200 - total flux cleaned = -0.00203348 Jy ! Component: 3250 - total flux cleaned = -0.00200074 Jy ! Component: 3300 - total flux cleaned = -0.00204977 Jy ! Component: 3350 - total flux cleaned = -0.00203357 Jy ! Component: 3400 - total flux cleaned = -0.00204977 Jy ! Component: 3450 - total flux cleaned = -0.00201765 Jy ! Component: 3500 - total flux cleaned = -0.0020017 Jy ! Component: 3550 - total flux cleaned = -0.00206546 Jy ! Component: 3600 - total flux cleaned = -0.0020972 Jy ! Component: 3650 - total flux cleaned = -0.00211299 Jy ! Component: 3700 - total flux cleaned = -0.00209735 Jy ! Component: 3750 - total flux cleaned = -0.00209732 Jy ! Component: 3800 - total flux cleaned = -0.00211295 Jy ! Component: 3850 - total flux cleaned = -0.00217499 Jy ! Component: 3900 - total flux cleaned = -0.00219035 Jy ! Component: 3950 - total flux cleaned = -0.00219038 Jy ! Component: 4000 - total flux cleaned = -0.00222087 Jy ! Component: 4050 - total flux cleaned = -0.00220568 Jy ! Total flux subtracted in 4096 components = -0.00223596 Jy ! Clean residual min=-0.000830 max=0.000845 Jy/beam ! Clean residual mean=-0.000000 rms=0.000286 Jy/beam ! Combined flux in latest and established models = 0.0768403 Jy keep ! Adding 299 model components to the UV plane model. ! The established model now contains 353 components and 0.0768402 Jy ![Exited script file: muppet] wmap "J0854+0720_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.419 x 7.908 at -3.257 degrees (North through East) ! Clean map min=-0.0021412 max=0.075416 Jy/beam ! Writing clean map to FITS file: J0854+0720_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0754163 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000283222 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.12663 1.12663 2.25327 4.50653 9.01306 18.0261 36.0522 72.1045 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.075 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.419 x 7.908 at -3.257 degrees (North through East) ! Clean map min=-0.0021412 max=0.075416 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0854+0720_S_2017_05_27_pus_uvs.log closed on Fri May 3 11:02:52 2019